| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The last test case checks whether unpacked objects receive the time stamp
of the pack file. Due to different implementations of stat(2) by MSYS and
our version in compat/mingw.c, the test fails in about half of the test
runs.
Note the following facts:
- The test uses perl's -M operator to compare the time stamps. Since we
depend on MSYS perl, the result of this operator is based on MSYS's
implementation of the stat(2) call.
- NTFS on Windows records fractional seconds.
- The MSYS implementation of stat(2) *rounds* fractional seconds to full
seconds instead of truncating them. This becomes obvious by comparing the
modification times reported by 'ls --full-time $f' and 'stat $f' for
various files $f.
- Our implementation of stat(2) in compat/mingw.c *truncates* to full
seconds.
The consequence of this is that
- add_packed_git() picks up a truncated whole second modification time
from the pack file time stamp, which is then used for the loose objects,
while the pack file retains its time stamp in fractional seconds;
- but the test case compared the pack file's rounded modification times
to the loose objects' truncated modification times.
And half of the time the rounded modification time is not the same as its
truncated modification time.
The fix is that we replace perl by 'test-chmtime -v +0', which prints the
truncated whole-second mtime without modifying it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
send-pack: do not send unknown object name from ".have" to pack-objects
test-path-utils: Fix off by one, found by valgrind
get_sha1_basic(): fix invalid memory access, found by valgrind
|
|
v1.6.1 introduced ".have" extension to the protocol to allow the receiving
side to advertise objects that are reachable from refs in the repositories
it borrows from. This was meant to be used by the sending side to avoid
sending such objects; they are already available through the alternates
mechanism.
The client side implementation in v1.6.1, which was introduced with
40c155f (push: prepare sender to receive extended ref information from the
receiver, 2008-09-09) aka v1.6.1-rc1~203^2~1, were faulty in that it did
not consider the possiblity that the repository receiver borrows from
might have objects it does not know about.
This fixes it by refraining from passing missing commits to underlying
pack-objects. Revision machinery may need to be tightened further to
treat missing uninteresting objects as non-error events, but this is an
obvious and safe fix for a maintenance release that is almost good enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some shells have issues with a single-shot environment variable export
when invoking a shell function. This fixes the ones I found that invoke
test_must_fail that way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d911d14 (rebase -i: learn to rebase root commit, 2009-01-02) tried to
remember the --root flag across a merge conflict in a broken way.
Introduce a flag file $DOTEST/rebase-root to fix and clarify.
While at it, also make sure $UPSTREAM is always initialized to guard
against existing values in the environment.
[tr: added tests]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.bogomips.org/git-svn:
git-svn: Add test for --ignore-paths parameter
git-svn: documented --ignore-paths
git-svn: add --ignore-paths option for fetching
git-svn: fix memory leak when checking for empty symlinks
|
|
* js/diff-color-words:
Change the spelling of "wordregex".
color-words: Support diff.wordregex config option
color-words: make regex configurable via attributes
color-words: expand docs with precise semantics
color-words: enable REG_NEWLINE to help user
color-words: take an optional regular expression describing words
color-words: change algorithm to allow for 0-character word boundaries
color-words: refactor word splitting and use ALLOC_GROW()
Add color_fwrite_lines(), a function coloring each line individually
|
|
* js/maint-all-implies-HEAD:
bundle: allow the same ref to be given more than once
revision walker: include a detached HEAD in --all
|
|
* sr/clone-empty:
Allow cloning an empty repository
|
|
Added a test for this option, similar to (and based on) t9133 about
ignorance of .git directories
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: replaced 'echo -e' with printf so it works on POSIX shells]
[ew: added Vitaly to copyright even though it's based on my test]
|
|
* js/patience-diff:
bash completions: Add the --patience option
Introduce the diff option '--patience'
Implement the patience diff algorithm
Conflicts:
contrib/completion/git-completion.bash
|
|
* cb/maint-unpack-trees-absense:
unpack-trees: remove redundant path search in verify_absent
unpack-trees: fix path search bug in verify_absent
unpack-trees: handle failure in verify_absent
|
|
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
|
|
* js/add-not-submodule:
git add: do not add files from a submodule
|
|
With --reject, git-am simply passes the --reject option to git-apply and thus
allows people to work with reject files if they so prefer.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add testcases for 'git log --diff-filter=[CM]' (copies and renames).
Also add a testcase for 'git log --follow'.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cloning an empty repository manually (that is, doing 'git init' and
then doing all configuration by hand) can be a lot of work. Save the
user this work by allowing the cloning of empty repositories.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "wordRegex" for configuration variable names. Use "word_regex" for C
language tokens.
Signed-off-by: Boyd Stephen Smith Jr. <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kc/maint-diff-bwi-fix:
Fix combined use of whitespace ignore options to diff
|
|
* sg/maint-gitdir-in-subdir:
Fix gitdir detection when in subdir of gitdir
|
|
* rs/ctype:
Add is_regex_special()
Change NUL char handling of isspecial()
Reformat ctype.c
Add ctype test
Conflicts:
Makefile
|
|
* jk/color-parse:
Optimize color_parse_mem
expand --pretty=format color options
color: make it easier for non-config to parse color specs
|
|
* jc/maint-format-patch-o-relative:
Teach format-patch to handle output directory relative to cwd
Conflicts:
t/t4014-format-patch.sh
|
|
* kb/am-directory:
git-am: fix shell quoting
git-am: add --directory=<dir> option
|
|
* maint:
Rename diff.suppress-blank-empty to diff.suppressBlankEmpty
|
|
When diff is invoked with --color-words (w/o =regex), use the regular
expression the user has configured as diff.wordregex.
diff drivers configured via attributes take precedence over the
diff.wordregex-words setting. If the user wants to change them, they have
their own configuration variables.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All the other config variables use CamelCase. This config variable should
not be an exception.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code used to misbehave when options to ignore certain whitespaces
(-w -b and --ignore-at-eol) were combined.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some SVN repositories contain git repositories within them
(hopefully accidentally checked in). Since git refuses to track
nested ".git" repositories, this can be a problem when fetching
updates from SVN.
Thanks to Morgan Christiansson for the report and testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The get_log() function in the Perl SVN API introduced the limit
parameter in 1.2.0. However, this got discarded in our SVN::Ra
compatibility layer when used with SVN 1.1.x. We now emulate
the limit functionality in older SVN versions by preventing the
original callback from being called if the given limit has been
reached. This emulation is less bandwidth efficient, but SVN
1.1.x is becoming rarer now.
Additionally, the --limit parameter in svn(1) uses the
aforementioned get_log() functionality change in SVN 1.2.x.
t9129 no longer depends on --limit to work and instead uses
Perl to parse out the commit message.
Thanks to Tom G. Christensen for the bug report.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This is a followup to 7fc35e0e94782bbbefb920875813519038659930,
(workaround a for broken symlinks in SVN).
Since broken SVN clients can commit svn:special files without
the magic "link " prefix, this can affect delta application
when we update the broken svn:special file. So now we fall
back and retry the delta application on symlinks if having
a "link " prefix fails.
Our behavior differs from svn(1) (v1.5.1) slightly:
When a svn:special file is created w/o a "link " prefix, svn
will create a regular file (mode 100644 to git) with the
contents of the blob as-is.
Our behavior is to continue creating the symlink (mode 120000
to git) with the contents of the blob as-is. While this
differs from current svn(1) behavior, this is easier and more
efficient to implement (and the correctness of the svn(1) is
debatable, since it's a workaround for a bug in the first
place).
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Broken SVN clients generate empty files with the svn:special set
to '*'. This attempts to denote a symlink pointing to a file
with an empty path (""), which cannot be generated on a POSIX
system.
Thus, we mimic the behavior of svn(1) and create a zero-byte
file in our tree.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The ability to "...fatten [the] local repository by packing everything that
is needed by the local ref into a single new pack, including things that are
borrowed from alternates"[1] is supposed to be provided by the '-a' or '-A'
options to repack when '-l' is not used, but there is a flaw. For each
pack in the local repository without a .keep file, repack supplies a
--unpacked=<pack> argument to pack-objects.
The --unpacked option to pack-objects, with or without an argument, causes
pack-objects to ignore any object which is packed in a pack not mentioned
in an argument to --unpacked=. So, if there are local packs, and
'repack -a' is called, then any objects which reside in packs accessible
through alternates will _not_ be packed. If there are no local packs, then
no --unpacked argument will be supplied, and repack will behave as expected.
[1] http://mid.gmane.org/7v8wrwidi3.fsf@gitster.siamese.dyndns.org
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mv/apply-parse-opt:
Resurrect "git apply --flags -" to read from the standard input
parse-opt: migrate builtin-apply.
|
|
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
|
|
* ap/clone-into-empty:
Allow cloning to an existing empty directory
add is_dot_or_dotdot inline function
|
|
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
|
|
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
|
|
"git bundle create x master master" used to create a bundle that lists
the same branch (master) twice. Cloning from such a bundle resulted in
a needless warning "warning: Duplicated ref: refs/remotes/origin/master".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When HEAD is detached, --all should list it, too, logically, as a
detached HEAD is by definition a temporary, unnamed branch.
It is especially necessary to list it when garbage collecting, as
the detached HEAD would be trashed.
Noticed by Thomas Rast.
Note that this affects creating bundles with --all; I contend that it
is a good change to add the HEAD, so that cloning from such a bundle
will give you a current branch. However, I had to fix t5701 as it
assumed that --all does not imply HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the current working directory is a subdirectory of the gitdir (e.g.
<repo>/.git/refs/), then setup_git_directory_gently() will climb its
parent directories until it finds itself in a gitdir. However, no
matter how many parent directories it climbs, it sets
'GIT_DIR_ENVIRONMENT' to ".", which is obviously wrong.
This behaviour affected at least 'git rev-parse --git-dir' and hence
caused some errors in bash completion (e.g. customized command prompt
when on a detached head and completion of refs).
To fix this, we set the absolute path of the found gitdir instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Manipulating the character class table in ctype.c by hand is error prone.
To ensure that typos are found quickly, add a test program and script.
test-ctype checks the output of the character class macros isspace() et.
al. by applying them on all possible char values and consulting a list of
all characters in the particular class. It doesn't check tolower() and
toupper(); this could be added later.
The test script t0070-fundamental.sh is created because there is no good
place for the ctype test, yet -- except for t0000-basic.sh perhaps, but
it doesn't run well on Windows, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function lock_remote() sends MKCOL requests to make leading
directories; However, if it does not put a forward slash '/' at the end of
the path, the server sends a 301 redirect.
By leaving the '/' in place, we can avoid this additional step.
Incidentally, at least one version of Curl (7.16.3) does not resend
credentials when it follows a 301 redirect, so this commit also fixes
a bug.
Original patch by Tay Ray Chuan <rctay89@gmail.com>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the --color-words splitting regular expression configurable via
the diff driver's 'wordregex' attribute. The user can then set the
driver on a file in .gitattributes. If a regex is given on the
command line, it overrides the driver's setting.
We also provide built-in regexes for the languages that already had
funcname patterns, and add an appropriate diff driver entry for C/++.
(The patterns are designed to run UTF-8 sequences into a single chunk
to make sure they remain readable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some applications, words are not delimited by white space. To
allow for that, you can specify a regular expression describing
what makes a word with
git diff --color-words='[A-Za-z0-9]+'
Note that words cannot contain newline characters.
As suggested by Thomas Rast, the words are the exact matches of the
regular expression.
Note that a regular expression beginning with a '^' will match only
a word at the beginning of the hunk, not a word at the beginning of
a line, and is probably not what you want.
This commit contains a quoting fix by Thomas Rast.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Sixt
Junio C Hamano
Vitaly \"_Vi\" Shukela
martin f. krafft
Arjen Laarhoven
Sverre Rabbelier
Boyd Stephen Smith Jr
Johannes Schindelin
Markus Heidelberg
Keith Cascio
Eric Wong
Brandon Casey
SZEDER Gábor
René Scharfe
Jeff King
Thomas Rast