| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/untracked-cache:
t7063: hide stderr from setup inside prereq
|
|
When t7063 starts, it runs "update-index --untracked-cache"
to see if we support the untracked cache. Its output goes
straight to stderr, even if the test is not run with "-v".
Let's wrap it in a prereq that will hide the output by
default, but show it with "-v".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
|
|
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
|
|
"git pull --log" and "git pull --no-log" worked as expected, but
"git pull --log=20" did not.
* pt/pull-log-n:
pull: handle --log=<n>
|
|
There was a commented-out (instead of being marked to expect
failure) test that documented a breakage that was fixed since the
test was written; turn it into a proper test.
* sb/t1020-cleanup:
subdirectory tests: code cleanup, uncomment test
|
|
Filter scripts were run with SIGPIPE disabled on the Git side,
expecting that they may not read what Git feeds them to filter.
We however treated a filter that does not read its input fully
before exiting as an error.
This changes semantics, but arguably in a good way. If a filter
can produce its output without consuming its input using whatever
magic, we now let it do so, instead of diagnosing it as a
programming error.
* jc/ignore-epipe-in-filter:
filter_buffer_or_fd(): ignore EPIPE
copy.c: make copy_fd() report its status silently
|
|
Instead of dying immediately upon failing to obtain a lock, retry
after a short while with backoff.
* mh/lockfile-retry:
lock_packed_refs(): allow retries when acquiring the packed-refs lock
lockfile: allow file locking to be retried with a timeout
|
|
"git add -e" did not allow the user to abort the operation by
killing the editor.
* jk/add-e-kill-editor:
add: check return value of launch_editor
|
|
Code clean-up for completion script (in contrib/).
* sg/completion-config:
completion: simplify query for config variables
completion: add a helper function to get config variables
|
|
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
|
|
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
|
|
The "log --decorate" enhancement in Git 2.4 that shows the commit
at the tip of the current branch e.g. "HEAD -> master", did not
work with --decorate=full.
* mg/log-decorate-HEAD:
log: do not shorten decoration names too early
log: decorate HEAD with branch name under --decorate=full, too
|
|
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
|
|
We are explicitly ignoring SIGPIPE, as we fully expect that the
filter program may not read our output fully. Ignore EPIPE that
may come from writing to it as well.
A new test was stolen from Jeff's suggestion.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
|
|
"git merge FETCH_HEAD" learned that the previous "git fetch" could
be to create an Octopus merge, i.e. recording multiple branches
that are not marked as "not-for-merge"; this allows us to lose an
old style invocation "git merge <msg> HEAD $commits..." in the
implementation of "git pull" script; the old style syntax can now
be deprecated.
* jc/merge:
merge: deprecate 'git merge <message> HEAD <commit>' syntax
merge: handle FETCH_HEAD internally
merge: decide if we auto-generate the message early in collect_parents()
merge: make collect_parents() auto-generate the merge message
merge: extract prepare_merge_message() logic out
merge: narrow scope of merge_names
merge: split reduce_parents() out of collect_parents()
merge: clarify collect_parents() logic
merge: small leakfix and code simplification
merge: do not check argc to determine number of remote heads
merge: clarify "pulling into void" special case
t5520: test pulling an octopus into an unborn branch
t5520: style fixes
merge: simplify code flow
merge: test the top-level merge driver
|
|
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
|
|
Help us to find broken test script that splits the body part of the
test by mistaken use of wrong kind of quotes.
* jc/test-prereq-validate:
test: validate prerequistes syntax
|
|
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
|
|
Developer support to automatically detect broken &&-chain in the
test scripts is now turned on by default.
* jk/test-chain-lint:
test-lib: turn on GIT_TEST_CHAIN_LINT by default
t7502-commit.sh: fix a broken and-chain
|
|
"git stash pop/apply" forgot to make sure that not just the working
tree is clean but also the index is clean. The latter is important
as a stash application can conflict and the index will be used for
conflict resolution.
* jk/stash-require-clean-index:
stash: require a clean index to apply
t3903: avoid applying onto dirty index
t3903: stop hard-coding commit sha1s
|
|
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
|
|
After "git add -N", the path appeared in output of "git diff HEAD"
and "git diff --cached HEAD", leading "git status" to classify it
as "Changes to be committed". Such a path, however, is not yet to
be scheduled to be committed. "git diff" showed the change to the
path as modification, not as a "new file", in the header of its
output.
Treat such paths as "yet to be added to the index but Git already
know about them"; "git diff HEAD" and "git diff --cached HEAD"
should not talk about them, and "git diff" should show them as new
files yet to be added to the index.
* nd/diff-i-t-a:
diff-lib.c: adjust position of i-t-a entries in diff
|
|
Back when these tests were written, we wanted to make sure that Git
notices it is in a bare repository and "git show -s HEAD" would
refrain from complaining that HEAD might mean a file it sees in its
current working directory (because it does not). But the version of
Git back then didn't behave well, without (doubly) being told that
it is inside a bare repository by exporting "GIT_DIR=.". The form
of the test we originally wanted to have was left commented out as
a reminder.
Nowadays the test as originally intended works, so add it to the
test suite. We'll keep the old test that explicitly sets GIT_DIR=.
to make sure that use case will not regress.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), running
git-pull with the configuration pull.ff=false or pull.ff=only is
equivalent to passing --no-ff and --ff-only to git-merge. However, if
pull.ff=true, no switch is passed to git-merge. This leads to the
confusing behavior where pull.ff=false or pull.ff=only is able to
override merge.ff, while pull.ff=true is unable to.
Fix this by adding the --ff switch if pull.ff=true, and add a test to
catch future regressions.
Furthermore, clarify in the documentation that pull.ff overrides
merge.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since efb779f (merge, pull: add '--(no-)log' command line option,
2008-04-06) git-pull supported the (--no-)log switch and would pass it
to git-merge.
96e9420 (merge: Make '--log' an integer option for number of shortlog
entries, 2010-09-08) implemented support for the --log=<n> switch, which
would explicitly set the number of shortlog entries. However, git-pull
does not recognize this option, and will instead pass it to git-fetch,
leading to "unknown option" errors.
Fix this by matching --log=* in addition to --log and --no-log.
Implement a test for this use case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, there is only one attempt to acquire any lockfile, and if
the lock is held by another process, the locking attempt fails
immediately.
This is not such a limitation for loose reference files. First, they
don't take long to rewrite. Second, most reference updates have a
known "old" value, so if another process is updating a reference at
the same moment that we are trying to lock it, then probably the
expected "old" value will not longer be valid, and the update will
fail anyway.
But these arguments do not hold for packed-refs:
* The packed-refs file can be large and take significant time to
rewrite.
* Many references are stored in a single packed-refs file, so it could
be that the other process was changing a different reference than
the one that we are interested in.
Therefore, it is much more likely for there to be spurious lock
conflicts in connection to the packed-refs file, resulting in
unnecessary command failures.
So, if the first attempt to lock the packed-refs file fails, continue
retrying for a configurable length of time before giving up. The
default timeout is 1 second.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous step to teach "log --decorate" to show "HEAD -> master"
instead of "HEAD, master" when showing the commit at the tip of the
'master' branch, when the 'master' branch is checked out, did not
work for "log --decorate=full".
The commands in the "log" family prepare commit decorations for all
refs upfront, and the actual string used in a decoration depends on
how load_ref_decorations() is called very early in the process. By
default, "git log --decorate" stores names with common prefixes such
as "refs/heads" stripped; "git log --decorate=full" stores the full
refnames.
When the current_pointed_by_HEAD() function has to decide if "HEAD"
points at the branch a decoration describes, however, what was
passed to load_ref_decorations() to decide to strip (or keep) such a
common prefix is long lost. This makes it impossible to reliably
tell if a decoration that stores "refs/heads/master", for example,
is the 'master' branch (under "--decorate" with prefix omitted) or
'refs/heads/master' branch (under "--decorate=full").
Keep what was passed to load_ref_decorations() in a global next to
the global variable name_decoration, and use that to decide how to
match what was read from "HEAD" and what is in a decoration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old code was roughly
for update in updates:
acquire locks and check old_sha
for update in updates:
if changing value:
write_ref_to_lockfile()
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This has two problems.
Non-atomic updates
==================
The atomicity of the reference transaction depends on all pre-checks
being done in the first loop, before any changes have started being
committed in the second loop. The problem is that
write_ref_to_lockfile() (previously part of write_ref_sha1()), which
is called from the second loop, contains two more checks:
* It verifies that new_sha1 is a valid object
* If the reference being updated is a branch, it verifies that
new_sha1 points at a commit object (as opposed to a tag, tree, or
blob).
If either of these checks fails, the "transaction" is aborted during
the second loop. But this might happen after some reference updates
have already been permanently committed. In other words, the
all-or-nothing promise of "git update-ref --stdin" could be violated.
So these checks have to be moved to the first loop.
File descriptor exhaustion
==========================
The old code locked all of the references in the first loop, leaving
all of the lockfiles open until later loops. Since we might be
updating a lot of references, this could result in file descriptor
exhaustion.
The solution
============
After this patch, the code looks like
for update in updates:
acquire locks and check old_sha
if changing value:
write_ref_to_lockfile()
else:
close_ref()
for update in updates:
if changing value:
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This fixes both problems:
1. The pre-checks in write_ref_to_lockfile() are now done in the first
loop, before any changes have been committed. If any of the checks
fails, the whole transaction can now be rolled back correctly.
2. All lockfiles are closed in the first loop immediately after they
are created (either by write_ref_to_lockfile() or by close_ref()).
This means that there is never more than one open lockfile at a
time, preventing file descriptor exhaustion.
To simplify the bookkeeping across loops, add a new REF_NEEDS_COMMIT
bit to update->flags, which keeps track of whether the corresponding
lockfile needs to be committed, as opposed to just unlocked. (Since
"struct ref_update" is internal to the refs module, this change is not
visible to external callers.)
This change fixes two tests in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During creation of the patch series our discussion we could have a
more descriptive name for the prerequisite for the test so it stays
unique when other limits of ulimit are introduced.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "add -e", if launching the editor fails, we do
not notice and continue as if the output is what the user
asked for. The likely case is that the editor did not touch
the contents at all, and we end up adding everything.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To get the name of all config variables in a given section we perform a
'git config --get-regex' query for all config variables containing the
name of that section, and then filter its output through a case statement
to throw away those that though contain but don't start with the given
section.
Modify the regex to match only at the beginning, so the case statement
becomes unnecessary and we can get rid of it. Add a test to check that a
match in the middle doesn't fool us.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently there are a few completion functions that perform similar 'git
config' queries and filtering to get config variable names: the completion
of pretty aliases, aliases, and remote groups for 'git remote update'.
Unify those 'git config' queries in a helper function to eliminate code
duplication.
Though the helper functions to get pretty aliases and alieses are reduced
to mere one-liner wrappers around the newly added function, keep these
helpers still, because users' completion functions out there might depend
on them. And they keep their callers a tad easier to read, too.
Add tests for the pretty alias and alias helper to show that they work
as before; not for the remote groups query, though, because that's not
extracted into a helper function and it's not worth the effort to do so
for a sole callsite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation fix.
* mm/usage-log-l-can-take-regex:
log -L: improve error message on malformed argument
Documentation: change -L:<regex> to -L:<funcname>
|
|
The usual "git diff" when seeing a file turning into a directory
showed a patchset to remove the file and create all files in the
directory, but "git diff --no-index" simply refused to work. Also,
when asked to compare a file and a directory, imitate POSIX "diff"
and compare the file with the file with the same name in the
directory, instead of refusing to run.
* jc/diff-no-index-d-f:
diff-no-index: align D/F handling with that of normal Git
diff-no-index: DWIM "diff D F" into "diff D/F F"
|
|
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
|
|
"filter-branch" corrupted commit log message that ends with an
incomplete line on platforms with some "sed" implementations that
munge such a line. Work it around by avoiding to use "sed".
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: avoid passing commit message through sed
|
|
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
|
|
* va/fix-git-p4-tests:
git-p4: t9814: prevent --chain-lint failure
|
|
* ld/p4-case-fold:
git-p4: add failing tests for case-folding p4d
|
|
git p4 attempts to better handle branches in Perforce.
* va/p4-client-path:
git-p4: improve client path detection when branches are used
t9801: check git-p4's branch detection with client spec enabled
|
|
When "add--interactive" splits a hunk into two overlapping hunks
and then let the user choose only one, it sometimes feeds an
incorrect patch text to "git apply". Add tests to demonstrate
this.
I have a slight suspicion that this may be $gmane/87202 coming back
and biting us (I seem to have said "let's run with this and see
what happens" back then).
* mm/add-p-split-error:
stash -p: demonstrate failure of split with mixed y/n
t3904-stash-patch: factor PERL prereq at the top of the file
t3904-stash-patch: fix test description
add -p: demonstrate failure when running 'edit' after a split
t3701-add-interactive: simplify code
|
|
More line-ending tests.
* tb/t0027-crlf:
t0027: Add repoMIX and LF_nul
t0027: support NATIVE_CRLF platforms
t0027: cleanup: rename functions; avoid non-leading TABs
|
|
"git p4" learned "--changes-block-size <n>" to read the changes in
chunks from Perforce, instead of making one call to "p4 changes"
that may trigger "too many rows scanned" error from Perforce.
* ls/p4-changes-block-size:
git-p4: use -m when running p4 changes
|
|
An earlier rewrite to use strbuf_getwholeline() instead of fgets(3)
to read packed-refs file revealed that the former is unacceptably
inefficient.
* jk/reading-packed-refs:
t1430: add another refs-escape test
read_packed_refs: avoid double-checking sane refs
strbuf_getwholeline: use getdelim if it is available
strbuf_getwholeline: avoid calling strbuf_grow
strbuf_addch: avoid calling strbuf_grow
config: use getc_unlocked when reading from file
strbuf_getwholeline: use getc_unlocked
git-compat-util: add fallbacks for unlocked stdio
strbuf_getwholeline: use getc macro
|
|
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
|
|
Tweak the sample "store" backend of the credential helper to honor
XDG configuration file locations when specified.
* pt/credential-xdg:
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
|
Galan Rémi
Junio C Hamano
Jeff King
Stefan Beller
Paul Tan
Michael Haggerty
SZEDER Gábor