| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
|
|
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
|
|
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
This supersedes jc/config-case-cmdline topic that has been discarded.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
|
|
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
|
|
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
|
|
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
|
|
A test that creates a confusing branch whose name is HEAD has been
corrected not to do so.
* jk/t6300-cleanup:
t6300: avoid creating refs/heads/HEAD
|
|
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
|
|
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
|
|
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
|
|
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
... and then to down to 'maint'.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
|
|
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
|
|
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
|
|
This test just checks that old clients can clone and fetch
from a newer git-daemon. The opposite should also be true,
but it's hard to test ancient versions of git-daemon because
they lack basic options like "--listen".
Note that we have to make a slight tweak to the
lib-git-daemon helper from the regular tests, so that it
starts the daemon with our correct git.a version.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current test suite is good at letting you test a
particular version of Git. But it's not very good at letting
you test _two_ versions and seeing how they interact (e.g.,
one cloning from the other).
This commit adds a test harness that will build two
arbitrary versions of git and make it easy to call them from
inside your tests. See the README and the example script for
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 4ac9006f832 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When GIT_WORK_TREE does not specify a valid path, we should error
out, instead of crashing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing implementation of range_set_union does not correctly
reallocate memory, leading to a heap overflow when it attempts to union
more than 24 separate line ranges.
For struct range_set *out to grow correctly it must have out->nr set to
the current size of the buffer when it is passed to range_set_grow.
However, the existing implementation of range_set_union only updates
out->nr at the end of the function, meaning that it is always zero
before this. This results in range_set_grow never growing the buffer, as
well as some of the union logic itself being incorrect as !out->nr is
always true.
The reason why 24 is the limit is that the first allocation of size 1
ends up allocating a buffer of size 24 (due to the call to alloc_nr in
ALLOC_GROW). This goes some way to explain why this hasn't been
caught before.
Fix the problem by correctly updating out->nr after reallocating the
range_set. As this results in out->nr containing the same value as the
variable o, replace o with out->nr as well.
Finally, add a new test to help prevent the problem reoccurring in the
future. Thanks to Vegard Nossum for writing the test.
Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's tempting to say:
./run v1.0.0 HEAD
to see how we've sped up Git over the years. Unfortunately,
this doesn't quite work because versions of Git prior to
v1.7.0 lack bin-wrappers, so our "run" script doesn't
correctly put them in the PATH.
Worse, it means we silently find whatever other "git" is in
the PATH, and produce test results that have no bearing on
what we asked for.
Let's fallback to the main git directory when bin-wrappers
isn't present. Many modern perf scripts won't run with such
an antique version of Git, of course, but at least those
failures are detected and reported (and you're free to write
a limited perf script that works across many versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 1a0962dee (t/perf: fix regression in testing older
versions of git, 2016-06-22), we point "$MODERN_GIT" to a
copy of git that matches the t/perf script itself, and which
can be used for tasks outside of the actual timings. This is
needed because the setup done by perf scripts keeps moving
forward in time, and may use features that the older
versions of git we are testing do not have.
That commit used $MODERN_GIT to fix a case where we relied
on the relatively recent --git-path option. But if you go
back further still, there are more problems.
Since 7501b5921 (perf: make the tests work in worktrees,
2016-05-13), we use "git -C", but versions of git older than
44e1e4d67 (git: run in a directory given with -C option,
2013-09-09) don't know about "-C". So testing an old version
of git with a new version of t/perf will fail the setup
step.
We can fix this by using $MODERN_GIT during the setup;
there's no need to use the antique version, since it doesn't
affect the timings. Likewise, we'll adjust the "init"
invocation; antique versions of git called this "init-db".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In p0001, a variable was created in a test_expect_success block to be
used in later test_perf blocks, but was not exported. This caused the
variable to not appear in those blocks (this can be verified by writing
'test -n "$commit"' in those blocks), resulting in a slightly different
invocation than what was intended. Export that variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers of diff_populate_filespec() can choose to ask only for the
size of the blob without grabbing the blob data, and the function,
after running lstat() when the filespec points at a working tree
file, returns by copying the value in size field of the stat
structure into the size field of the filespec when this is the case.
However, this short-cut cannot be taken if the contents from the
path needs to go through convert_to_git(), whose resulting real blob
data may be different from what is in the working tree file.
As "git diff --quiet" compares the .size fields of filespec
structures to skip content comparison, this bug manifests as a
false "there are differences" for a file that needs eol conversion,
for example.
Reported-by: Mike Crowe <mac@mcrowe.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When invoked as "git add -i", each menu interactive menu
option prompts the user to select a list of files. This
includes the "patch" option, which gets the list before
starting the hunk-selection loop.
As "git add -p", it behaves differently, and jumps straight
to the hunk selection loop.
Since 0539d5e6d (i18n: add--interactive: mark patch prompt
for translation, 2016-12-14), the "add -i" case mistakenly
jumps to straight to the hunk-selection loop. Prior to that
commit the distinction between the two cases was managed by
the $patch_mode variable. That commit used $patch_mode for
something else, and moved the old meaning to the "$cmd"
variable. But it forgot to update the $patch_mode check
inside patch_update_cmd() which controls the file-list
behavior.
The simplest fix would be to change that line to check $cmd.
But while we're here, let's use a less obscure name for this
flag: $patch_mode_only, a boolean which tells whether we are
in full-interactive mode or only in patch-mode.
Reported-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
http.c supports HTTP redirects of the form
http://foo/info/refs?service=git-upload-pack
-> http://anything
-> http://bar/info/refs?service=git-upload-pack
(that is to say, as long as the Git part of the path and the query
string is preserved in the final redirect destination, the intermediate
steps can have any URL). However, if one of the intermediate steps
results in an HTTP exception, a confusing "unable to update url base
from redirection" message is printed instead of a Curl error message
with the HTTP exception code.
This was introduced by 2 commits. Commit c93c92f ("http: update base
URLs when we see redirects", 2013-09-28) introduced a best-effort
optimization that required checking if only the "base" part of the URL
differed between the initial request and the final redirect destination,
but it performed the check before any HTTP status checking was done. If
something went wrong, the normal code path was still followed, so this
did not cause any confusing error messages until commit 6628eb4 ("http:
always update the base URL for redirects", 2016-12-06), which taught
http to die if the non-"base" part of the URL differed.
Therefore, teach http to check the HTTP status before attempting to
check if only the "base" part of the URL differed. This commit teaches
http_request_reauth to return early without updating options->base_url
upon an error; the only invoker of this function that passes a non-NULL
"options" is remote-curl.c (through "http_get_strbuf"), which only uses
options->base_url for an informational message in the situations that
this commit cares about (that is, when the return value is not HTTP_OK).
The included test checks that the redirect scheme at the beginning of
this commit message works, and that returning a 502 in the middle of the
redirect scheme produces the correct result. Note that this is different
from the test in commit 6628eb4 ("http: always update the base URL for
redirects", 2016-12-06) in that this commit tests that a Git-shaped URL
(http://.../info/refs?service=git-upload-pack) works, whereas commit
6628eb4 tests that a non-Git-shaped URL
(http://.../info/refs/foo?service=git-upload-pack) does not work (even
though Git is processing that URL) and is an error that is fatal, not
silently swallowed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In one test, we use "git checkout --orphan HEAD" to create
an unborn branch. Confusingly, the resulting branch is named
"refs/heads/HEAD". The original probably meant something
like:
git checkout --orphan orphaned-branch HEAD
Let's just use "orphaned-branch" here to make this less
confusing. Putting HEAD in the second argument is already
implied.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adding comments after a tag in the body is a common practise (e.g. in
the Linux kernel) and git-send-email has been supporting this for years
by removing any trailing cruft after the address.
After some recent changes, any trailing comment is now instead appended
to the recipient name (with some random white space inserted) resulting
in undesirable noise in the headers, for example:
CC: "# 3 . 3 . x : 1b9508f : sched : Rate-limit newidle" <stable@vger.kernel.org>
Revert to the earlier behaviour of discarding anything after the (first)
address in a tag while parsing the body.
Note that multiple addresses after are still allowed after a command
line switch (and in a CC header field).
Also note that --suppress-cc=self was never honoured when using multiple
addresses in a tag.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parsing of one-shot assignments of configuration variables that
come from the command line historically was quite loose and allowed
anything to pass. It also downcased everything in the variable name,
even a three-level <section>.<subsection>.<variable> name in which
the <subsection> part must be treated in a case sensitive manner.
Existing git_config_parse_key() helper is used to parse the variable
name that comes from the command line, i.e. "git config VAR VAL",
and handles these details correctly. Replace the strbuf_tolower()
call in git_config_parse_parameter() with a call to it to correct
both issues. git_config_parse_key() does a bit more things that are
not necessary for the purpose of this codepath (e.g. it allocates a
separate buffer to return the canonicalized variable name because it
takes a "const char *" input), but we are not in a performance-critical
codepath here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
* ls/p4-path-encoding:
git-p4: fix git-p4.pathEncoding for removed files
|
|
The push-options given via the "--push-options" option were not
passed through to external remote helpers such as "smart HTTP" that
are invoked via the transport helper.
* sb/push-options-via-transport:
push options: pass push options to the transport helper
|
|
git-grep has always disallowed grepping in a tree (as
opposed to the working directory) with both --untracked
and --no-index. But we traditionally did so by first
collecting the revs, and then complaining when any were
provided.
The --no-index option recently learned to detect revs
much earlier. This has two user-visible effects:
- we don't bother to resolve revision names at all. So
when there's a rev/path ambiguity, we always choose to
treat it as a path.
- likewise, when you do specify a revision without "--",
the error you get is "no such path" and not "--untracked
cannot be used with revs".
The rationale for doing this with --no-index is that it is
meant to be used outside a repository, and so parsing revs
at all does not make sense.
This patch gives --untracked the same treatment. While it
_is_ meant to be used in a repository, it is explicitly
about grepping the non-repository contents. Telling the user
"we found a rev, but you are not allowed to use revs" is
not really helpful compared to "we treated your argument as
a path, and could not find it".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To push from or fetch to the current repository, remote helpers need
to know what repository that is. Accordingly, Git sets the GIT_DIR
environment variable to the path to the current repository when
invoking remote helpers.
There is a special case it does not handle: "git ls-remote" and "git
archive --remote" can be run to inspect a remote repository without
being run from any local repository. GIT_DIR is not useful in this
scenario:
- if we are not in a repository, we don't need to set GIT_DIR to
override an existing GIT_DIR value from the environment. If GIT_DIR
is present then we would be in a repository if it were valid and
would have called die() if it weren't.
- not setting GIT_DIR may cause a helper to do the usual discovery
walk to find the repository. But we know we're not in one, or we
would have found it ourselves. So in the worst case it may expend
a little extra effort to try to find a repository and fail (for
example, remote-curl would do this to try to find repository-level
configuration).
So leave GIT_DIR unset in this case. This makes GIT_DIR easier to
understand for remote helper authors and makes transport code less of
a special case for repository discovery.
Noticed using b1ef400e (setup_git_env: avoid blind fall-back to
".git", 2016-10-20) from 'next':
$ cd /tmp
$ git ls-remote https://kernel.googlesource.com/pub/scm/git/git
fatal: BUG: setup_git_env called without repository
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git ls-remote" command can be run outside of a
repository, but needs to look up configured remotes. The
config code is smart enough to handle this case itself, but
we also check the historical "branches" and "remotes" paths
in $GIT_DIR. The git_path() function causes us to blindly
look at ".git/remotes", even if we know we aren't in a git
repository.
For now, this is just an unlikely bug (you probably don't
have such a file if you're not in a repository), but it will
become more obvious once we merge b1ef400ee (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20):
[now]
$ git ls-remote
fatal: No remote configured to list refs from.
[with b1ef400ee]
$ git ls-remote
fatal: BUG: setup_git_env called without repository
We can fix this by skipping these sources entirely when
we're outside of a repository.
The test is a little more complex than the demonstration
above. Rather than detect the correct behavior by parsing
the error message, we can actually set up a case where the
remote name we give is a valid repository, but b1ef400ee
would cause us to die in the configuration step.
This test doesn't fail now, but it future-proofs us for the
b1ef400ee change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running a command of the form
git grep --no-index pattern -- path
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a9e38359e3 we taught git-p4 a way to re-encode path names from what
was used in Perforce to UTF-8. This path re-encoding worked properly for
"added" paths. "Removed" paths were not re-encoded and therefore
different from the "added" paths. Consequently, these files were not
removed in a git-p4 cloned Git repository because the path names did not
match.
Fix this by moving the re-encoding to a place that affects "added" and
"removed" paths. Add a test to demonstrate the issue.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --graph" did not work well with "--name-only", even though
other forms of "diff" output were handled correctly.
* jk/log-graph-name-only:
diff: print line prefix for --name-only output
|
|
Test updates.
* da/t7800-cleanup:
t7800: replace "wc -l" with test_line_count
|
|
A few hot-fixes to C-rewrite of "git difftool".
* js/difftool-builtin:
t7800: simplify basic usage test
difftool: fix bug when printing usage
|
|
Adjust a perf test to new world order where commands that do
require a repository are really strict about having a repository.
* rs/p5302-create-repositories-before-tests:
p5302: create repositories for index-pack results explicitly
|
|
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make t7800 easier to debug by capturing output into temporary files and
using test_line_count to make assertions on those files.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* da/difftool-dir-diff-fix:
difftool: fix dir-diff index creation when in a subdirectory
|
|
Use "test_line_count" instead of "wc -l", use "git -C" instead of a
subshell, and use test_expect_code when calling difftool. Ease
debugging by capturing output into temporary files.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before 7176a314 (index-pack: complain when --stdin is used outside of a
repo) index-pack silently created a non-existing target directory; now
the command refuses to work unless it's used against a valid repository.
That causes p5302 to fail, which relies on the former behavior. Fix it
by setting up the destinations for its performance tests using git init.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git difftool -h" reports an error:
fatal: BUG: setup_git_env called without repository
Defer repository setup so that the help option processing happens before
the repository is initialized.
Add tests to ensure that the basic usage works inside and outside of a
repository.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Johannes Schindelin
Allan Xavier
Jonathan Tan
Johan Hovold
Ross Lagerwall
Jonathan Nieder
David Turner
Lars Schneider
Stefan Beller
David Aguilar
René Scharfe