| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
|
|
The construct 'while IFS== read' makes dash 0.5.6 execute
read without changing IFS, which results in test breakages
all over the place in t0300. Neither dash 0.5.5.1 and older
nor dash 0.5.7 and newer are affected: The problem was
introduded resp. fixed by the commits
55c46b7 ([BUILTIN] Honor tab as IFS whitespace when
splitting fields in readcmd, 2009-08-11)
1d806ac ([VAR] Do not poplocalvars prematurely on regular
utilities, 2010-05-27)
in http://git.kernel.org/?p=utils/dash/dash.git
Putting 'IFS==' before that line makes all versions of dash
work.
This looks like a dash bug, not a misinterpretation of the
standard. However, it's worth working around for two
reasons. One, this version of dash was released in Fedora
14-16, so the bug is found in the wild. And two, at least
one other shell, Solaris /bin/sh, choked on this by
persisting IFS after the read invocation. That is not a
shell we usually care about, and I think this use of IFS is
acceptable by POSIX (which allows other behavior near
"special builtins", but "read" is not one of those). But it
seems that this may be a subtle, not-well-tested case for
some shells. Given that the workaround is so simple, it's
worth just being defensive.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare expected output inside test_expect_success that uses it.
Also remove excess blank lines.
Signed-off-by: Tom Grennan <tmgrennan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If any test script is run directly with Solaris 10 /usr/xpg4/bin/sh or
/bin/ksh, it fails spuriously with a message like:
t0000-basic.sh[31]: unset: bad argument count
This happens because those shells bail out when encountering a call to
"unset" with no arguments, and such unset call could take place in
'test-lib.sh'. Fix that issue, and add a proper comment to ensure we
don't regress in this respect.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/gitweb-unborn-head:
gitweb: Fix "heads" view when there is no current branch
|
|
* jc/add-refresh-unmerged:
refresh_index: do not show unmerged path that is outside pathspec
|
|
|
|
git-am.sh's check_patch_format function would attempt to preview
the patch to guess its format, but would go into an infinite loop
when the patch file happened to be empty. The solution: exit the
loop when "read" fails, not when the line var, "$l1" becomes empty.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This works in both bash and dash:
$ bash -c 'VAR=1 env' | grep VAR
VAR=1
$ dash -c 'VAR=1 env' | grep VAR
VAR=1
But environment variables assigned this way are not necessarily propagated
through a function in POSIX compliant shells:
$ bash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
VAR=1
$ dash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
Fix constructs like this, in particular, setting variables through
test_must_fail.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plain old $# works to count the number of arguments in
either bash or dash, even if the arguments have spaces.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the --use-client-spec is given to clone, and the clone
path is a subset of the full tree as specified in the client,
future submits will go to the wrong place.
Factor out getClientSpec() so both clone/sync and submit can
use it. Introduce getClientRoot() that is needed for the client
spec case, and use it instead of p4Where().
Test the five possible submit behaviors (add, modify, rename,
copy, delete).
Reported-by: Laurent Charrière <lcharriere@promptu.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --use-client-spec was given, set the matching configuration
variable. This is necessary to ensure that future submits
work properly.
The alternatives of requiring the user to set it, or providing
a command-line option on every submit, are error prone.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test did not adhere to the current style on several counts:
. empty lines around the test blocks, but within the test string
. ': > file' or even just '> file' with an extra space
. inconsistent indentation
. hand-rolled commits instead of using test_commit
Fix all of them.
There's a catch to the last point: test_commit creates a tag, which the
original test did not create. We still change it to test_commit, and
explicitly delete the tags, so as to highlight that the test relies on not
having them.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first part of the bundle header contains the boundary commits, and
could be approximated by
# v2 git bundle
$(git rev-list --pretty=oneline --boundary <ARGS> | grep ^-)
git-bundle actually spawns exactly this rev-list invocation, and does
the grepping internally.
There was a subtle bug in the latter step: it used fgets() with a
1024-byte buffer. If the user has sufficiently long subjects (e.g.,
by not adhering to the git oneline-subject convention in the first
place), the 'oneline' format can easily overflow the buffer. fgets()
then returns the rest of the line in the next call(s). If one of
these remaining parts started with '-', git-bundle would mistakenly
insert it into the bundle thinking it was a boundary commit.
Fix it by using strbuf_getwholeline() instead, which handles arbitrary
line lengths correctly.
Note that on the receiving side in parse_bundle_header() we were
already using strbuf_getwholeline_fd(), so that part is safe.
Reported-by: Jannis Pohlmann <jannis.pohlmann@codethink.co.uk>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/receive-pack-keep-errors:
do not override receive-pack errors
|
|
* cb/transfer-no-progress:
push/fetch/clone --no-progress suppresses progress output
|
|
* jk/git-dir-lookup:
standardize and improve lookup rules for external local repos
|
|
* cb/maint-rev-list-verify-object:
git rev-list: fix invalid typecast
|
|
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
|
|
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
|
|
* nd/diffstat-gramnum:
Use correct grammar in diffstat summary line
|
|
Commit ff7f218 (gitweb: Fix file links in "grep" search, 2012-01-05),
added $file_href variable, to reduce duplication and have the fix
applied in single place.
Unfortunately it made variable defined inside the loop, not taking into
account the fact that $file_href was set only if file changed.
Therefore for files with multiple matches $file_href was undefined for
second and subsequent matches.
Fix this bug by moving $file_href declaration outside loop.
Adds tests for almost all forms of sarch in gitweb, which were missing
from testuite. Note that it only tests if there are no warnings, and
it doesn't check that gitweb finds what it should find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "git add --refresh <pathspec>", we incorrectly showed the
path that is unmerged even if it is outside the specified pathspec, even
though we did honor pathspec and refreshed only the paths that matched.
Note that this cange does not affect "git update-index --refresh"; for
hysterical raisins, it does not take a pathspec (it takes real paths) and
more importantly itss command line options are parsed and executed one by
one as they are encountered, so "git update-index --refresh foo" means
"first refresh the index, and then update the entry 'foo' by hashing the
contents in file 'foo'", not "refresh only entry 'foo'".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a repository whose HEAD points to an unborn branch with no commits,
"heads" view and "summary" view (which shows what is shown in "heads"
view) compared the object names of commits at the tip of branches with the
output from "git rev-parse HEAD", which caused comparison of a string with
undef and resulted in a warning in the server log.
This can happen if non-bare repository (with default 'master' branch)
is updated not via committing but by other means like push to it, or
Gerrit. It can happen also just after running "git checkout --orphan
<new branch>" but before creating any new commit on this branch.
Rewrite the comparison so that it also works when $head points at nothing;
in such a case, no branch can be "the current branch", add a test for it.
While at it, rename local variable $head to $head_at, as it points to
current commit rather than current branch name (HEAD contents).
The code still incorrectly shows all branches that point at the same
commit as what HEAD points as "the current branch", even when HEAD is
detached. Fixing this bug is outside the scope of this patch.
Reported-by: Rajesh Boyapati
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/checkout-out-of-unborn:
git checkout -b: allow switching out of an unborn branch
|
|
* jc/maint-commit-ignore-i-t-a:
commit: ignore intent-to-add entries instead of refusing
Conflicts:
cache-tree.c
|
|
* jk/maint-tag-show-fixes:
tag: do not show non-tag contents with "-n"
tag: die when listing missing or corrupt objects
tag: fix output of "tag -n" when errors occur
Conflicts:
t/t7004-tag.sh
|
|
* jn/merge-no-edit-fix:
merge: do not launch an editor on "--no-edit $tag"
|
|
Receive runs rev-list --verify-objects in order to detect missing
objects. However, such errors are ignored and overridden later.
Instead, consequently ignore all update commands for which an error has
already been detected.
Some tests in t5504 are obsoleted by this change, because invalid
objects are detected even if fsck is not enabled. Instead, they now test
for different error messages depending on whether or not fsck is turned
on. A better fix would be to force a corruption that will be detected by
fsck but not by rev-list.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise the test cannot be run with custom port set to LIB_HTTPD_PORT.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git rev-list passes rev_list_info, not rev_list objects. Without this
fix, rev-list enables or disables the --verify-objects option depending
on a read from an undefined memory location.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/parse-date-raw:
parse_date(): '@' prefix forces git-timestamp
parse_date(): allow ancient git-timestamp
|
|
* jc/merge-ff-only-stronger-than-signed-merge:
merge: do not create a signed tag merge under --ff-only option
|
|
* jc/branch-desc-typoavoidance:
branch --edit-description: protect against mistyped branch name
tests: add write_script helper function
|
|
Change several tests to use the sane_unset function introduced in
v1.7.3.1-35-g00648ba instead of the built-in unset function.
This fixes a failure I was having on t9130-git-svn-authors-file.sh on
Solaris, and prevents several other issues from occurring.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-request-pull-for-tag:
request-pull: explicitly ask tags/$name to be pulled
|
|
* tr/grep-l-with-decoration:
grep: fix -l/-L interaction with decoration lines
|
|
* jl/submodule-re-add:
submodule add: fix breakage when re-adding a deep submodule
|
|
* da/maint-mergetool-twoway:
mergetool: Provide an empty file when needed
|
|
When the user explicitly asked us not to, don't launch an editor.
But do everything else the same way as the "edit" case, i.e. leave the
comment with verification result in the log template and record the
mergesig in the resulting merge commit for later inspection.
Based on initiail analysis by Jonathan Nieder.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git tag -n" did not check the type of the object it is reading the top n
lines from. At least, avoid showing the beginning of trees and blobs when
dealing with lightweight tags that point at them.
As the payload of a tag and a commit look similar in that they both start
with a header block, which is skipped for the purpose of "-n" output,
followed by human readable text, allow the message of commit objects to be
shown just like the contents of tag objects. This avoids regression for
people who have been using "tag -n" to show the log messages of commits
that are pointed at by lightweight tags.
Test script is from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, "git add -N" was introduced to help users from forgetting to
add new files to the index before they ran "git commit -a". As an attempt
to help them further so that they do not forget to say "-a", "git commit"
to commit the index as-is was taught to error out, reminding the user that
they may have forgotten to add the final contents of the paths before
running the command.
This turned out to be a false "safety" that is useless. If the user made
changes to already tracked paths and paths added with "git add -N", and
then ran "git add" to register the final contents of the paths added with
"git add -N", "git commit" will happily create a commit out of the index,
without including the local changes made to the already tracked paths. It
was not a useful "safety" measure to prevent "forgetful" mistakes from
happening.
It turns out that this behaviour is not just a useless false "safety", but
actively hurts use cases of "git add -N" that were discovered later and
have become popular, namely, to tell Git to be aware of these paths added
by "git add -N", so that commands like "git status" and "git diff" would
include them in their output, even though the user is not interested in
including them in the next commit they are going to make.
Fix this ancient UI mistake, and instead make a commit from the index
ignoring the paths added by "git add -N" without adding real contents.
Based on the work by Nguyễn Thái Ngọc Duy, and helped by injection of
sanity from Jonathan Nieder and others on the Git mailing list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "git checkout -b another" immediately after "git init" when you do
not even have a commit on 'master' fails with:
$ git checkout -b another
fatal: You are on a branch yet to be born
This is unnecessary, if we redefine "git checkout -b $name" that does not
take any $start_point (which has to be a commit) as "I want to check out a
new branch $name from the state I am in".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/smart-http-failure-to-push:
remote-curl: Fix push status report when all branches fail
|
|
* jc/maint-log-first-parent-pathspec:
Making pathspec limited log play nicer with --first-parent
|
|
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
|
|
It is very easy to mistype the branch name when editing its description,
e.g.
$ git checkout -b my-topic master
: work work work
: now we are at a good point to switch working something else
$ git checkout master
: ah, let's write it down before we forget what we were doing
$ git branch --edit-description my-tpoic
The command does not notice that branch 'my-tpoic' does not exist. It is
not lost (it becomes description of an unborn my-tpoic branch), but is not
very useful. So detect such a case and error out to reduce the grief
factor from this common mistake.
This incidentally also errors out --edit-description when the HEAD points
at an unborn branch (immediately after "init", or "checkout --orphan"),
because at that point, you do not even have any commit that is part of
your history and there is no point in describing how this particular
branch is different from the branch it forked off of, which is the useful
bit of information the branch description is designed to capture.
We may want to special case the unborn case later, but that is outside the
scope of this patch to prevent more common mistakes before 1.7.9 series
gains too much widespread use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting at release v1.7.9, if you ask to merge a signed tag, "git merge"
always creates a merge commit, even when the tag points at a commit that
happens to be a descendant of your current commit.
Unfortunately, this interacts rather badly for people who use --ff-only to
make sure that their branch is free of local developments. It used to be
possible to say:
$ git checkout -b frotz v1.7.9~30
$ git merge --ff-only v1.7.9
and expect that the resulting tip of frotz branch matches v1.7.9^0 (aka
the commit tagged as v1.7.9), but this fails with the updated Git with:
fatal: Not possible to fast-forward, aborting.
because a merge that merges v1.7.9 tag to v1.7.9~30 cannot be created by
fast forwarding.
We could teach users that now they have to do
$ git merge --ff-only v1.7.9^0
but it is far more pleasant for users if we DWIMmed this ourselves.
When an integrator pulls in a topic from a lieutenant via a signed tag,
even when the work done by the lieutenant happens to fast-forward, the
integrator wants to have a merge record, so the integrator will not be
asking for --ff-only when running "git pull" in such a case. Therefore,
this change should not regress the support for the use case v1.7.9 wanted
to add.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Michael J Gruber
Tom Grennan
Stefano Lattarini
Jim Meyering
Pete Wyckoff
Thomas Rast
Jakub Narebski
Clemens Buchacher
Ævar Arnfjörð Bjarmason