| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a test for the case when only one parameter is passed to '-m'
(move/rename) option.
For example - if 'git branch -m bbb' is run while checked out on aaa
branch, it should rename the currently checked out branch to bbb.
There was no test for this particular case with only one parameter
for -m option. However, there's one similar test case for -M option.
Add test for making sure HEAD points to the bbb (new branch name). Also
add a test for making sure the reflog that is moved to 'bbb' retains
entries created for the currently checked out branch. Note that since
the topmost entry on reflog for bbb will be about branch creation, we
compare bbb@{1} (instead of bbb@{0}) with aaa@{0} to make sure the
reflog for bbb retains entries from aaa.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* sd/t3200-typofix:
branch test: fix invalid config key access
|
|
The description strings for a few tests have been updated.
* sb/t5531-update-desc:
t5531: fix test description
|
|
* tb/dedup-crlf-tests:
t0027: tests are not expensive; remove t0025
|
|
A test allowed both "git push" and "git receive-pack" on the other
end write their traces into the same file. This is OK on platforms
that allows atomically appending to a file opened with O_APPEND,
but on other platforms led to a mangled output, causing
intermittent test failures. This has been fixed by disabling
traces from "receive-pack" in the test.
* jk/alternate-ref-optim:
t5400: avoid concurrent writes into a trace file
|
|
"git interpret-trailers", when used as GIT_EDITOR for "git commit
-v", looked for and appended to a trailer block at the very end,
i.e. at the end of the "diff" output. The command has been
corrected to pay attention to the cut-mark line "commit -v" adds to
the buffer---the real trailer block should appear just before it.
* bm/interpret-trailers-cut-line-is-eom:
interpret-trailers: honor the cut line
|
|
"git clone --config var=val" is a way to populate the
per-repository configuration file of the new repository, but it did
not work well when val is an empty string. This has been fixed.
* jn/clone-add-empty-config-from-command-line:
clone: handle empty config values in -c
|
|
"git cherry-pick" and other uses of the sequencer machinery
mishandled a trailer block whose last line is an incomplete line.
This has been fixed so that an additional sign-off etc. are added
after completing the existing incomplete line.
* jt/use-trailer-api-in-commands:
sequencer: add newline before adding footers
|
|
The receive-pack program now makes sure that the push certificate
records the same set of push options used for pushing.
* jt/push-options-doc:
receive-pack: verify push options in cert
docs: correct receive.advertisePushOptions default
|
|
Make sure our tests would pass when the sources are checked out
with "platform native" line ending convention by default on
Windows. Some "text" files out tests use and the test scripts
themselves that are meant to be run with /bin/sh, ought to be
checked out with eol=LF even on Windows.
* js/eol-on-ourselves:
t4051: mark supporting files as requiring LF-only line endings
Fix the remaining tests that failed with core.autocrlf=true
t3901: move supporting files into t/t3901/
completion: mark bash script as LF-only
git-new-workdir: mark script as LF-only
Fix build with core.autocrlf=true
|
|
Tag objects, which are not reachable from any ref, that point at
missing objects were mishandled by "git gc" and friends (they
should silently be ignored instead)
* jk/ignore-broken-tags-when-ignoring-missing-links:
revision.c: ignore broken tags with ignore_missing_links
|
|
"pack-objects" can stream a slice of an existing packfile out when
the pack bitmap can tell that the reachable objects are all needed
in the output, without inspecting individual objects. This
strategy however would not work well when "--local" and other
options are in use, and need to be disabled.
* jk/disable-pack-reuse-when-broken:
t5310: fix "; do" style
pack-objects: disable pack reuse for object-selection options
|
|
A hotfix to a topic that is already in v2.13.
* bw/submodule-with-bs-path:
t7400: add !CYGWIN prerequisite to 'add with \\ in path'
|
|
Setting "log.decorate=false" in the configuration file did not take
effect in v2.13, which has been corrected.
* ah/log-decorate-default-to-auto:
builtin/log: honor log.decorate
|
|
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
|
|
The Web interface to gmane news archive is long gone, even though
the articles are still accessible via NTTP. Replace the links with
ones to public-inbox.org. Because their message identification is
based on the actual message-id, it is likely that it will be easier
to migrate away from it if/when necessary.
* ab/doc-replace-gmane-links:
doc: replace more gmane links
doc: replace a couple of broken gmane links
|
|
Fixes the test by changing "branch.s/s/dummy" to "branch.s/s.dummy" which is
the right way of accessing config key "branch.s/s.dummy". Purpose of
this test is to confirm that this key doesn't exist after the branch
"s/s" has been renamed to "s".
Earlier it was trying to access invalid config key and hence was getting
an error. However, this wasn't caught because we were expecting the
command to fail for other reason as mentioned above.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of the test was not enclosed in single quotes, which
broke the coloring scheme that I am used to. Upon closer inspection
the test is good, but the description is a bit vague. So extend the
description of the first test.
While at it align the description of the file to match what we actually
test in the file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When peeling a tag for prepare_revision_walk(), we do not
respect the ignore_missing_links flag. This can lead to a
bogus error when pack-objects walks the possibly-broken
unreachable-but-recent part of the object graph.
The other link-following all happens via traverse_commit_list(),
which explains why this case was missed. And our tests
covered only broken links from commits. Let's be more
comprehensive and cover broken tree entries (which do work)
and tags (which shows off this bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One test in t5400 examines the packet exchange between git-push and
git-receive-pack. The latter inherits the GIT_TRACE_PACKET environment
variable, so that both processes dump trace data into the same file
concurrently. This should not be a problem because the trace file is
opened with O_APPEND.
On Windows, however, O_APPEND is not atomic as it should be: it is
emulated as lseek(SEEK_END) followed by write(). For this reason, the
test is unreliable: it can happen that one process overwrites a line
that was just written by the other process. As a consequence, the test
sometimes does not find one or another line that is expected (and it is
also successful occasionally).
The test case is actually only interested in the output of git-push.
To ensure that only git-push writes to the trace file, override the
receive-pack command such that it does not even open the trace file.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recent change that introduced autodecorating of refs accidentally
broke the ability of users to set log.decorate = false to override it.
When the git_log_config was traversed a second time with an option other
than log.decorate, the decoration style would be set to the automatic
style, even if the user had already overridden it. Instead of setting
the option in config parsing, set it in init_log_defaults instead.
Add a test for this case. The actual additional config option doesn't
matter, but it needs to be something not already set in the
configuration file.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The purpose of t0027 is to test all CRLF related conversions at "git
checkout" and "git add". Running t0027 under Git for Windows takes
3-4 minutes, so the whole script had been marked as "EXPENSIVE".
However, the "Git for Windows" fork overrides this since 2014:
"t0027 is marked expensive, but really, for MinGW we want to run
these tests always."
The test seems not to be expensive on other platforms at all: it
takes less than 14 seconds under Linux, and 63 seconds under Mac Os
X, and this is more or less the same with a SSD or a spinning disk.
So let's drop the "EXPENSIVE" prereq.
While at it, retire t0025; recent "stress" tests show that t0025 is
flaky, reported by Lars Schneider <larsxschneider@gmail.com>, but
all tests in t0025 are covered by t0027 already.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test t4051-diff-function-context.sh passes on Linux when
core.autocrlf=true even without marking its support files as LF-only,
but they fail when core.autocrlf=true in Git for Windows' SDK.
The reason is that `grep ... >file.c.new` will keep CR/LF line endings
on Linux (obviously treating CRs as if they were regular characters),
but will be converted to LF-only line endings with MSYS2's grep that is
used in Git for Windows.
As we do not want to validate the way the available `grep` works, let's
just mark the input as LF-only and move on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test suite is mainly developed on Linux and MacOSX, which is the
reason that nobody thought to mark files as LF-only as needed.
The symptom is a test suite that fails left and right when being checked
out using Git for Windows (which defaults to core.autocrlf=true).
Mostly, the problems stem from Git's (LF-only) output being compared to
hard-coded files that are checked out with line endings according to
core.autocrlf (which is of course incorrect). This includes the two test
files in t/diff-lib/, README and COPYING.
This patch can be validated even on Linux by using this cadence:
git config core.autocrlf true
rm .git/index && git stash
make -j15 DEVELOPER=1 test
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current convention is to either generate files on the fly in tests,
or to use supporting files taken from a t/tNNNN/ directory (where NNNN
matches the test's number, or the number of the test from which we
borrow supporting files).
The test t3901-i18n-patch.sh was obviously introduced before that
convention was in full swing, hence its supporting files still lived in
t/t3901-8859-1.txt and t/t3901-utf8.txt, respectively.
Let's adjust to the current convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit f6a4e61 ("push: accept push options", 2016-07-14), send-pack
was taught to include push options both within the signed cert (if the
push is a signed push) and outside the signed cert; however,
receive-pack ignores push options within the cert, only handling push
options outside the cert.
Teach receive-pack, in the case that push options are provided for a
signed push, to verify that the push options both within the cert and
outside the cert are consistent.
This sets in stone the requirement that send-pack redundantly send its
push options in 2 places, but I think that this is better than the
alternatives. Sending push options only within the cert is
backwards-incompatible with existing Git servers (which read push
options only from outside the cert), and sending push options only
outside the cert means that the push options are not signed for.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/verify-index-checksum-only-in-fsck:
t1450: avoid use of "sed" on the index, which is a binary file
|
|
Our usual shell style is to put the "do" of a loop on its
own line, like:
while $cond
do
something
done
instead of:
while $cond; do
something
done
We have a bit of both in our code base, but the former is
what's in CodingGuidelines (and outnumbers the latter in t/
by about 6:1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If certain options like --honor-pack-keep, --local, or
--incremental are used with pack-objects, then we need to
feed each potential object to want_object_in_pack() to see
if it should be filtered out. But when the bitmap
reuse_packfile optimization is in effect, we do not call
that function at all, and in fact skip adding the objects to
the to_pack list entirely. This means we have a bug: for
certain requests we will silently ignore those options and
include objects in that pack that should not be there.
The problem has been present since the inception of the
pack-reuse code in 6b8fda2db (pack-objects: use bitmaps when
packing objects, 2013-12-21), but it was unlikely to come up
in practice. These options are generally used for on-disk
packing, not transfer packs (which go to stdout), but we've
never allowed pack reuse for non-stdout packs (until
645c432d6, we did not even use bitmaps, which the reuse
optimization relies on; after that, we explicitly turned it
off when not packing to stdout).
We can fix this by just disabling the reuse_packfile
optimization when the options are in use. In theory we could
teach the pack-reuse code to satisfy these checks, but it's
not worth the complexity. The purpose of the optimization is
to keep the amount of per-object work we do to a minimum.
But these options inherently require us to search for other
copies of each object, drowning out any benefit of the
pack-reuse optimization. But note that the optimizations
from 56dfeb626 (pack-objects: compute local/ignore_pack_keep
early, 2016-07-29) happen before pack-reuse, meaning that
specifying "--honor-pack-keep" in a repository with no .keep
files can still follow the fast path.
There are tests in t5310 that check these options with
bitmaps and --stdout, but they didn't catch the bug, and
it's hard to adapt them to do so.
One problem is that they don't use --delta-base-offset;
without that option, we always disable the reuse
optimization entirely. It would be fine to add it in (it
actually makes the test more realistic), but that still
isn't quite enough.
The other problem is that the reuse code is very picky; it
only kicks in when it can reuse most of a pack, starting
from the first byte. So we'd have to start from a fully
repacked and bitmapped state to trigger it. But the tests
for these options use a much more subtle state; they want to
be sure that the want_object_in_pack() code is allowing some
objects but not others. Doing a full repack runs counter to
that.
So this patch adds new tests at the end of the script which
create the fully-packed state and make sure that each option
is not fooled by reusable pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --config" uses the following incantation to add an item to
a config file, instead of replacing an existing value:
git_config_set_multivar_gently(key, value, "^$", 0)
As long as no existing value matches the regex ^$, that works as
intended and adds to the config. When a value is empty, though, it
replaces the existing value.
Noticed while trying to set credential.helper during a clone to use a
specific helper without inheriting from ~/.gitconfig and
/etc/gitconfig. That is, I ran
git clone -c credential.helper= \
-c credential.helper=myhelper \
https://example.com/repo
intending to produce the configuration
[credential]
helper =
helper = myhelper
Without this patch, the 'helper =' line is not included and the
credential helper from /etc/gitconfig gets used.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" failed to re-read the todo list file when the
command specified with the `exec` instruction updated it.
* sh/rebase-i-reread-todo-after-exec:
rebase -i: reread the todo list if `exec` touched it
|
|
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
|
|
Output from perf tests have been updated to align their titles.
* ab/align-perf-descriptions:
t/perf: correctly align non-ASCII descriptions in output
|
|
Commit cf9e55f494 ("submodule: prevent backslash expantion in submodule
names", 07-04-2017) added a test which creates a git repository with
some backslash characters in the name. On windows, where the backslash
character is a directory separator, it is not possible to create a
repository with the name 'sub\with\backslash'. (The NTFS filesystem would
probably allow it, but the win32 api does not). The MinGW and Git for
Windows versions of git actually create a repository called 'backslash'
in the sub-directory 'sub/with'.
On cygwin, however, due to the slightly schizophrenic treatment of the
backslash character by cygwin-git, this test fails at the 'git init'
stage. The git-init command does not recognise the directory separators
in the input path (eg. is_dir_sep('\\') is false), so it does not
attempt to create the leading directories 'sub/with'. (The call to
mkdir('sub\\with\\backslash') actually does recognise the directory
separators, but fails because the 'sub/with' directory doesn't exist).
In order to suppress the test failure (for now), add the !CYGWIN test
prerequisite.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the scripted version of the interactive rebase, there was no internal
representation of the todo list; it was re-read before every command.
That allowed the hack that an `exec` command could append (or even
completely rewrite) the todo list.
This hack was broken by the partial conversion of the interactive rebase
to C, and this patch reinstates it.
We also add a small test to verify that this fix does not regress in the
future.
Signed-off-by: Stephen Hicks <sdh@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When encountering a commit message that does not end in a newline,
sequencer does not complete the line before determining if a blank line
should be added. This causes the "(cherry picked..." and sign-off lines
to sometimes appear on the same line as the last line of the commit
message.
This behavior was introduced by commit 967dfd4 ("sequencer: use
trailer's trailer layout", 2016-11-29). However, a revert of that commit
would not resolve this issue completely: prior to that commit, a
conforming footer was deemed to be non-conforming by
has_conforming_footer() if there was no terminating newline, resulting
in both conforming and non-conforming footers being treated the same
when they should not be.
Resolve this issue, both for conforming and non-conforming footers, and
in both do_pick_commit() and append_signoff(), by always adding a
newline to the commit message if it does not end in one before checking
the footer for conformity.
Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous step added a path zzzzzzzz to the index, and then used
"sed" to replace this string to yyyyyyyy to create a test case where
the checksum at the end of the file does not match the contents.
Unfortunately, use of "sed" on a non-text file is not portable.
Instead, use a Perl script that seeks to the end and modifies the
last byte of the file (where we _know_ stores the trailing
checksum).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow to lock a worktree immediately after it's created. This helps
prevent a race between "git worktree add; git worktree lock" and
"git worktree prune".
* nd/worktree-add-lock:
worktree add: add --lock option
|
|
The completion script (in contrib/) learned to complete "git push
--delete b<TAB>" to complete branch name to be deleted.
* ab/completion-push-delete-ref:
completion: expand "push --delete <remote> <ref>" for refs on that <remote>
|
|
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
|
|
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
|
|
Doc update.
* ab/push-cas-doc-n-test:
push: document & test --force-with-lease with multiple remotes
|
|
A recent update broke "git add -p ../foo" from a subdirectory.
* ps/pathspec-empty-prefix-origin:
pathspec: honor `PATHSPEC_PREFIX_ORIGIN` with empty prefix
|
|
Having a git command on the upstream side of a pipe in a test
script will hide the exit status from the command, which may cause
us to fail to notice a breakage; rewrite tests in a script to avoid
this issue.
* pc/t2027-git-to-pipe-cleanup:
t2027: avoid using pipes
|
|
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
|
|
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"ls-files --recurse-submodules" did not quite work well in a
project with nested submodules.
* jk/ls-files-recurse-submodules-fix:
ls-files: fix path used when recursing into submodules
ls-files: fix recurse-submodules with nested submodules
|
Sahil Dua
Junio C Hamano
Stefan Beller
Jeff King
Brian Malehorn
brian m. carlson
Ævar Arnfjörð Bjarmason
Torsten Bögershausen
Johannes Schindelin
Jonathan Tan
Jonathan Nieder
Ramsay Jones
Stephen Hicks
Jeff Hostetler