| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
|
|
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
|
|
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
|
|
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
|
|
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
|
|
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
|
|
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
|
|
Doc update.
* ls/filter-process:
t0021: fix flaky test
docs: warn about possible '=' in clean/smudge filter process values
|
|
Code cleanup.
* sb/t3600-cleanup:
t3600: slightly modernize style
t3600: remove useless redirect
|
|
* sb/unpack-trees-grammofix:
unpack-trees: fix grammar for untracked files in directories
|
|
* ls/t0021-fixup:
t0021: minor filter process test cleanup
|
|
Test code clean-up.
* ak/lazy-prereq-mktemp:
t7610: clean up foo.XXXXXX tmpdir
|
|
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
|
|
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
|
|
"git p4" misbehaved when swapping a directory and a symbolic link.
* ld/p4-compare-dir-vs-symlink:
git-p4: avoid crash adding symlinked directory
|
|
A lazy "git push" without refspec did not internally use a fully
specified refspec to perform 'current', 'simple', or 'upstream'
push, causing unnecessary "ambiguous ref" errors.
* jc/push-default-explicit:
push: test pushing ambiguously named branches
push: do not use potentially ambiguous default refspec
|
|
"git index-pack --stdin" needs an access to an existing repository,
but "git index-pack file.pack" to generate an .idx file that
corresponds to a packfile does not.
* jk/index-pack-wo-repo-from-stdin:
index-pack: skip collision check when not in repository
t: use nongit() function where applicable
index-pack: complain when --stdin is used outside of a repo
t5000: extract nongit function to test-lib-functions.sh
|
|
A recent update to receive-pack to make it easier to drop garbage
objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot
have a pathname with a colon in it (no surprise!), and this in turn
made it impossible to push into a repository at such a path. This
has been fixed by introducing a quoting mechanism used when
appending such a path to the colon-separated list.
* jk/quote-env-path-list-component:
t5615-alternate-env: double-quotes in file names do not work on Windows
t5547-push-quarantine: run the path separator test on Windows, too
tmp-objdir: quote paths we add to alternates
alternates: accept double-quoted paths
|
|
Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back
to where cherry-pick started while picking multiple changes, when
the cherry-pick stopped to ask for help from the user, and the user
did "git reset --hard" to a different commit in order to re-attempt
the operation.
* sb/sequencer-abort-safety:
Revert "sequencer: remove useless get_dir() function"
sequencer: remove useless get_dir() function
sequencer: make sequencer abort safer
t3510: test that cherry-pick --abort does not unsafely change HEAD
am: change safe_to_abort()'s not rewinding error into a warning
am: fix filename in safe_to_abort() error message
|
|
"git pull --rebase", when there is no new commits on our side since
we forked from the upstream, should be able to fast-forward without
invoking "git rebase", but it didn't.
* jc/pull-rebase-ff:
pull: fast-forward "pull --rebase=true"
|
|
"git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* ak/commit-only-allow-empty:
commit: remove 'Clever' message for --only --amend
commit: make --only --allow-empty work without paths
|
|
"git difftool --dir-diff" had a minor regression when started from
a subdirectory, which has been fixed.
* da/difftool-dir-diff-fix:
difftool: fix dir-diff index creation when in a subdirectory
|
|
"git diff --no-index" did not take "--no-abbrev" option.
* jb/diff-no-index-no-abbrev:
diff: handle --no-abbrev in no-index case
|
|
When diff.renames configuration is on (and with Git 2.9 and later,
it is enabled by default, which made it worse), "git stash"
misbehaved if a file is removed and another file with a very
similar content is added.
* jk/stash-disable-renames-internally:
stash: prefer plumbing over git-diff
|
|
Update the error messages from the dumb-http client when it fails
to obtain loose objects; we used to give sensible error message
only upon 404 but we now forbid unexpected redirects that needs to
be reported with something sensible.
* jk/http-walker-limit-redirect:
http-walker: complain about non-404 loose object errors
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
|
|
Fix a corner case in merge-recursive regression that crept in
during 2.10 development cycle.
* jc/renormalize-merge-kill-safer-crlf:
convert: git cherry-pick -Xrenormalize did not work
merge-recursive: handle NULL in add_cacheinfo() correctly
cherry-pick: demonstrate a segmentation fault
|
|
"git p4" LFS support was broken when LFS stores an empty blob.
* ls/p4-empty-file-on-lfs:
git-p4: fix empty file processing for large file system backend GitLFS
|
|
The output from "git worktree list" was made in readdir() order,
and was unstable.
* nd/worktree-list-fixup:
worktree list: keep the list sorted
worktree.c: get_worktrees() takes a new flag argument
get_worktrees() must return main worktree as first item even on error
worktree: reorder an if statement
worktree.c: zero new 'struct worktree' on allocation
|
|
"git push --dry-run --recurse-submodule=on-demand" wasn't
"--dry-run" in the submodules.
* bw/push-dry-run:
push: fix --dry-run to not push submodules
push: --dry-run updates submodules when --recurse-submodules=on-demand
|
|
An empty directory in a working tree that can simply be nuked used
to interfere while merging or cherry-picking a change to create a
submodule directory there, which has been fixed..
* dt/empty-submodule-in-merge:
submodules: allow empty working-tree dirs in merge/cherry-pick
|
|
"git rev-parse --symbolic" failed with a more recent notation like
"HEAD^-1" and "HEAD^!".
* jk/rev-parse-symbolic-parents-fix:
rev-parse: fix parent shorthands with --symbolic
|
|
A few of the tests want to check that "git grep -P -E" will
override -P with -E, and vice versa. To do so, we use a
regex with "\x{..}", which is valid in PCRE but not defined
by POSIX (for basic or extended regular expressions).
However, POSIX declares quite a lot of syntax, including
"\x", as "undefined". That leaves implementations free to
extend the standard if they choose. At least one, musl libc,
implements "\x" in the same way as PCRE. Our tests check
that "-E" complains about "\x", which fails with musl.
We can fix this by finding some construct which behaves
reliably on both PCRE and POSIX, but differently in each
system.
One such construct is the use of backslash inside brackets.
In PCRE, "[\d]" interprets "\d" as it would outside the
brackets, matching a digit. Whereas in POSIX, the backslash
must be treated literally, and we match either it or a
literal "d". Moreover, implementations are not free to
change this according to POSIX, so we should be able to rely
on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's possible for content currently found in one file to
have originated in two separate files, each of which may
have been modified in some single older commit. The
--porcelain output generates an incorrect "previous" header
in this case, whereas --line-porcelain gets it right. The
problem is that the porcelain output tries to omit repeated
details of commits, and treats "previous" as a property of
the commit, when it is really a property of the blamed block
of lines.
Let's look at an example. In a case like this, you might see
this output from --line-porcelain:
SOME_SHA1 1 1 1
author ...
committer ...
previous SOME_SHA1^ file_one
filename file_one
...some line content...
SOME_SHA1 2 1 1
author ...
committer ...
previous SOME_SHA1^ file_two
filename file_two
...some different content....
The "filename" fields tell us that the two lines are from
two different files. But notice that the filename also
appears in the "previous" field, which tells us where to
start a re-blame. The second content line never appeared in
file_one at all, so we would obviously need to re-blame from
file_two (or possibly even some other file, if had just been
renamed to file_two in SOME_SHA1).
So far so good. Now here's what --porcelain looks like:
SOME_SHA1 1 1 1
author ...
committer ...
previous SOME_SHA1^ file_one
filename file_one
...some line content...
SOME_SHA1 2 1 1
filename file_two
...some different content....
We've dropped the author and committer fields from the
second line, as they would just be repeats. But we can't
omit "filename", because it depends on the actual block of
blamed lines, not just the commit. This is handled by
emit_porcelain_details(), which will show the filename
either if it is the first mention of the commit _or_ if the
commit has multiple paths in it.
But we don't give "previous" the same handling. It's written
inside emit_one_suspect_detail(), which bails early if we've
already seen that commit. And so the output above is wrong;
a reader would assume that the correct place to re-blame
line two is from file_one, but that's obviously nonsense.
Let's treat "previous" the same as "filename", and show it
fresh whenever we know we are in a confusing case like this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You can already ask blame for full sha1s with "-l" or with
"--abbrev=40". But for consistency with other parts of Git,
we should support "--no-abbrev".
Worse, blame already accepts --no-abbrev, but it's totally
broken. When we see --no-abbrev, the abbrev variable is set
to 0, which is then used as a printf precision. For regular
sha1s, that means we print nothing at all (which is very
wrong). For boundary commits we decrement it to "-1", which
printf interprets as "no limit" (which is almost correct,
except it misses the 39-length magic explained in the
previous commit).
Let's detect --no-abbrev and behave as if --abbrev=40 was
given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The blame command internally adds 1 to any requested sha1
abbreviation length, and then subtracts it when outputting a
boundary commit. This lets regular and boundary sha1s line
up visually, but it misses one corner case.
When the requested length is 40, we bump the value to 41.
But since we only have 40 characters, that's all we can show
(fortunately the truncation is done by a printf precision
field, so it never tries to read past the end of the
buffer). So a normal sha1 shows 40 hex characters, and a
boundary sha1 shows "^" plus 40 hex characters. The result
is misaligned.
The "-l" option to show long sha1s gets around this by
skipping the "abbrev" variable entirely and just always
using GIT_SHA1_HEXSZ. This avoids the "+1" issue, but it
does mean that boundary commits only have 39 characters
printed. This is somewhat odd, but it does look good
visually: the results are aligned and left-justified. The
alternative would be to allocate an extra column that would
contain either an extra space or the "^" boundary marker.
As this is by definition the human-readable view, it's
probably not that big a deal either way (and of course
--porcelain, etc, correctly produce correct 40-hex sha1s).
But for consistency, this patch teaches --abbrev=40 to
produce the same output as "-l" (always left-aligned, with
40-hex for normal sha1s, and "^" plus 39-hex for
boundaries).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the detached HEAD check from branch_get_push_1() to
branch_get_push() to avoid setting branch->push_tracking_ref when
branch is NULL.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 4aff646d17 (archive-zip: mark text files in archives,
2015-03-05), the zip archiver will look at the userdiff
driver to decide whether a file is text or binary. This
usually doesn't need to look any further than the attributes
themselves (e.g., "-diff", etc). But if the user defines a
custom driver like "diff=foo", we need to look at
"diff.foo.binary" in the config. Prior to this patch, we
didn't actually load it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bitmap index only works for single packs, so requesting an
incremental repack with bitmap indexes makes no sense.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git gc --auto does an incremental repack of loose objects, we do
not expect to be able to write a bitmap; it is very likely that
objects in the new pack will have references to objects outside of the
pack. So we shouldn't try to write a bitmap, because doing so will
likely issue a warning.
This warning was making its way into gc.log. When the gc.log was
present, future auto gc runs would refuse to run.
Patch by Jeff King.
Bug report, test, and commit message by David Turner.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Protect a recently added test case with !MINGW.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In typical uses of fast-import, trees are inherited from a parent
commit. In that case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = <tree structure loaded from $some_sha1>
However, when trees are imported, rather than inherited, that is not the
case. One can import a tree with a filemodify command, replacing the
root tree object.
e.g.
"M 040000 $some_sha1 \n"
In this case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = NULL
When adding new notes with the notemodify command, do_change_note_fanout
is called to get a notes count, and to do so, it loops over the
tree_entry->tree, but doesn't do anything when the tree is NULL.
In the latter case above, it means do_change_note_fanout thinks the tree
contains no notes, and new notes are added with no fanout.
Interestingly, do_change_note_fanout does check whether subdirectories
have a NULL .tree, in which case it uses load_tree(). Which means the
right behaviour happens when using the filemodify command to import
subdirectories.
This change makes do_change_note_fanount call load_tree() whenever the
tree_entry it is given has no tree loaded, making all cases handled
equally.
Signed-off-by: Mike Hommey <mh@glandium.org>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When importing from multiple perforce paths - we may attempt to
import a changelist that contains files from two (or more) of these
depot paths. Currently, this results in multiple git commits - one
containing the changes, and the other(s) as empty commit(s). This
behavior was introduced in commit 1f90a64891 ("git-p4: reduce number
of server queries for fetches", 2015-12-19).
Reproduction Steps:
1. Have a git repo cloned from a perforce repo using multiple
depot paths (e.g. //depot/foo and //depot/bar).
2. Submit a single change to the perforce repo that makes changes
in both //depot/foo and //depot/bar.
3. Run "git p4 sync" to sync the change from #2.
Change is synced as multiple commits, one for each depot path that
was affected.
Using a set, instead of a list inside p4ChangesForPaths() ensures
that each changelist is unique to the returned list, and therefore
only a single commit is generated for each changelist.
Reported-by: James Farwell <jfarwell@vmware.com>
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting to P4, if git-p4 came across a symlinked
directory, then during the generation of the submit diff, it would
try to open it as a normal file and fail.
Spot symlinks (of any type) and output a description of the symlink
instead.
Add a test case.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t0021.15 creates files, adds them to the index, and commits them. All
this usually happens in a test run within the same second and Git cannot
know if the files have been changed between `add` and `commit`. Thus,
Git has to run the clean filter in both operations. Sometimes these
invocations spread over two different seconds and Git can infer that the
files were not changed between `add` and `commit` based on their
modification timestamp. The test would fail as it expects the filter
invocation. Remove this expectation to make the test stable.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests want to run a command outside of any git repo;
with the nongit() function this is now a one-liner. It saves
a few lines, but more importantly, it's immediately obvious
what the code is trying to accomplish.
This doesn't convert every such case in the test suite; it
just covers those that want to do a one-off command. Other
cases, such as the ones in t4035, are part of a larger
scheme of outside-repo files, and it's less confusing for
them to stay consistent with the surrounding tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index-pack builtin is marked as RUN_SETUP_GENTLY,
because it's perfectly fine to index a pack in the
filesystem outside of any repository. However, --stdin mode
will write the result to the object database, which does not
make sense outside of a repository. Doing so creates a bogus
".git" directory with nothing in it except the newly-created
pack and its index.
Instead, let's flag this as an error and abort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function abstracts the idea of running a command
outside of any repository (which is slightly awkward to do
because even if you make a non-repo directory, git may keep
walking up outside of the trash directory). There are
several scripts that use the same technique, so let's make
the function available for everyone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To perform the test case on Windows in a way that corresponds to the
POSIX version, inject the semicolon in a directory name.
Typically, an absolute POSIX style path, such as the one in $PWD, is
translated into a Windows style path by bash when it invokes git.exe.
However, the presence of the semicolon suppresses this translation;
but the untranslated POSIX style path is useless for git.exe.
Therefore, instead of $PWD pass the Windows style path that $(pwd)
produces.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the space between redirection and file name.
Also remove unnecessary invocations of subshells, such as
(cd submod &&
echo X >untracked
) &&
as there is no point of having the shell for functional purposes.
In case of a single Git command use the `-C` option to let Git cd into
the directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) regressed pushes to
repositories with colon (or semi-colon in Windows in them)
because it adds the repository's main object directory to
GIT_ALTERNATE_OBJECT_DIRECTORIES. The receiver interprets
the colon as a delimiter, not as part of the path, and
index-pack is unable to find objects which it needs to
resolve deltas.
The previous commit introduced a quoting mechanism for the
alternates list; let's use it here to cover this case. We'll
avoid quoting when we can, though. This alternate setup is
also used when calling hooks, so it's possible that the user
may call older git implementations which don't understand
the quoting mechanism. By quoting only when necessary, this
setup will continue to work unless the user _also_ has a
repository whose path contains the delimiter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Kyle Meyer
David Turner
Johannes Sixt
Mike Hommey
George Vanburgh
Luke Diamand
Lars Schneider
Stefan Beller