| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "git ls-remote" uses its exit status to indicate if it successfully
talked with the remote repository. A new option "--exit-code" makes the
command exit with status "2" when there is no refs to be listed, even when
the command successfully talked with the remote repository.
This way, the caller can tell if we failed to contact the remote, or the
remote did not have what we wanted to see. Of course, you can inspect the
output from the command, which has been and will continue to be a valid
way to check the same thing.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
|
|
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
|
|
* bf/commit-template-no-cleanup:
Do not strip empty lines / trailing spaces from a commit message template
|
|
* jc/t1506-shell-param-expansion-gotcha:
t1507: avoid "${parameter<op>'word'}" inside double-quotes
|
|
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
|
|
* jc/fix-add-u-unmerged:
Fix "add -u" that sometimes fails to resolve unmerged paths
|
|
* jn/setup-revisions-glob-and-friends-passthru:
revisions: allow --glob and friends in parse_options-enabled commands
revisions: split out handle_revision_pseudo_opt function
|
|
* maint:
Prepare for 1.7.5.2
t5400: Fix a couple of typos
Conflicts:
RelNotes
|
|
* aw/maint-rebase-i-p-no-ff:
git-rebase--interactive.sh: preserve-merges fails on merges created with no-ff
|
|
* js/blame-parsename:
t/annotate-tests: Use echo & cat instead of sed
blame: tolerate bogus e-mail addresses a bit better
|
|
* jk/merge-one-file-working-tree:
merge-one-file: fix broken merges with alternate work trees
add tests for merge-index / merge-one-file
|
|
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
|
|
* mz/maint-rename-unmerged:
diffcore-rename: don't consider unmerged path as source
|
|
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/struct-pathspec:
Tweak t3102-ls-tree-wildcards to run on Windows
|
|
The test case fails on Windows, because "a*" is an invalid file name.
Therefore, use "a[a]" instead.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Nguyen Thai Ngoc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-branch-mergeoptions:
merge: make branch.<name>.mergeoptions correctly override merge.<option>
Conflicts:
builtin/merge.c
|
|
* jn/maint-test-merge-verify-parents:
tests: teach verify_parents to check for extra parents
tests: eliminate unnecessary setup test assertions
|
|
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
|
|
* dm/http-cleanup:
t5541-http-push: add test for chunked
http-push: refactor curl_easy_setup madness
http-push: use const for strings in signatures
http: make curl callbacks match contracts from curl header
|
|
* jn/ctags:
gitweb: Mark matched 'ctag' / contents tag (?by_tag=foo)
gitweb: Change the way "content tags" ('ctags') are handled
gitweb: Restructure projects list generation
|
|
Templates should be just that: A form that the user fills out, and forms
have blanks. If people are attached to not having extra whitespace in the
editor, they can simply clean up their templates.
Added test with editor adding even more whitespace.
Signed-off-by: Boris Faure <billiob@gmail.com>
Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git commit --interactive feel more like git add --interactive by
allowing the user to restrict the list of files they have to deal with.
A test in t7501 used to ensure that this is not allowed; no need for that
anymore.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command expects "git commit --interactive <path>" to fail because you
cannot (yet) limit "commit --interactive" with a pathspec, but even if the
command allowed to take <path>, the test would have failed as saying just
7:quit would leave the index the same as the current commit, leading to an
attempt to create an empty commit that would fail without --allow-empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Kacper Kornet noticed that a $variable in "word" in the above construct is
not substituted by his pdksh. Modern POSIX compliant shells (e.g. dash,
ksh, bash) all seem to interpret POSIX "2.6.2 Parameter Expansion" that
says "word shall be subjected to tilde expansion, parameter expansion,
command substitution, and arithmetic expansion" in ${parameter<op>word},
to mean that the word is expanded as if it appeared in dq pairs, so if the
word were "'$variable'" (sans dq) it would expand to a single quote, the
value of the $variable and then a single quote.
Johannes Sixt reports that the behavior of quoting at the right of :- when
the ${...:-...} expansion appears in double-quotes was debated recently at
length at the Austin group. We can avoid this issue and future-proof the
test by a slight rewrite.
Helped-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maybe some day in the future we will want to support a syntax
like
[merge]
ff = branch1
ff = branch2
ff = branch3
in addition to the currently permitted "true", "false", and "only"
values. So make sure we continue to treat such configurations as
though an unknown variable had been defined rather than erroring out,
until it is time to implement such a thing, so configuration files
using such a facility can be shared between present and future git.
While at it, add a few missing && and start the "combining --squash
and --no-ff" test with a known state so we can be sure it does not
succeed or fail for the wrong reason.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently verify_parents only makes sure that the earlier parents of
HEAD match the commits given, and does not care if there are more
parents. This makes it harder than one would like to check that, for
example, parent reduction works correctly when making an octopus.
Fix it by checking that HEAD^(n+1) is not a valid commit name.
Noticed while working on a new test that was supposed to create a
fast-forward one commit ahead but actually created a merge.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-branch-mergeoptions:
merge: make branch.<name>.mergeoptions correctly override merge.<option>
|
|
The parsing of the additional command line parameters supplied to
the branch.<name>.mergeoptions configuration variable was implemented
at the wrong stage. If any merge-related variable came after we read
branch.<name>.mergeoptions, the earlier value was overwritten.
We should first read all the merge.* configuration, override them by
reading from branch.<name>.mergeoptions and then finally read from
the command line.
This patch should fix it, even though I now strongly suspect that
branch.<name>.mergeoptions that gives a single command line that
needs to be parsed was likely to be an ill-conceived idea to begin
with. Sigh...
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of git's tests write files and define shell functions and
variables that will last throughout a test script at the top of
the script, before all test assertions:
. ./test-lib.sh
VAR='some value'
export VAR
>empty
fn () {
do something
}
test_expect_success 'setup' '
... nontrivial commands go here ...
'
Two scripts use a different style with this kind of trivial code
enclosed by a test assertion; fix them. The usual style is easier to
read since there is less indentation to keep track of and no need to
worry about nested quotes; and on the other hand, because the commands
in question are trivial, it should not make the test suite any worse
at catching future bugs in git.
While at it, make some other small tweaks:
- spell function definitions with a space before () for consistency
with other scripts;
- use the self-contained command "git mktree </dev/null" in
preference to "git write-tree" which looks at the index when
writing an empty tree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/run-command-error-failure:
run-command: handle short writes and EINTR in die_child
tests: check error message from run_command
|
|
* jk/merge-one-file-working-tree:
merge-one-file: fix broken merges with alternate work trees
add tests for merge-index / merge-one-file
|
|
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
|
|
* js/blame-parsename:
t/annotate-tests: Use echo & cat instead of sed
blame: tolerate bogus e-mail addresses a bit better
|
|
* jk/format-patch-quote-special-in-from:
pretty: quote rfc822 specials in email addresses
Conflicts:
pretty.c
t/t4014-format-patch.sh
|
|
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
|
|
* aw/maint-rebase-i-p-no-ff:
git-rebase--interactive.sh: preserve-merges fails on merges created with no-ff
Conflicts:
git-rebase--interactive.sh
|
|
* mg/alias-expose-prefix:
handle_alias: provide GIT_PREFIX to !alias
t1020: test !alias in subdirectory
|
|
* maint:
t3701: fix here document
git-fast-import.txt: --relative-marks takes no parameter
shell: add missing initialization of argv0_path
|
|
A broken here-document was not caught because end of file is taken by
an implicit end of the here document (POSIX does not seem to say it is
an error to lack the delimiter), and everything in the test just turned
into a single "cat into a file".
Noticed-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The use of the sed command "1i No robots allowed" caused the version
of sed in OS X to die with
sed: 1: "1i "No robots allowed"\n": command i expects \ followed by
text
Since this command was just trying to add a single line to the
beginning of the file, do the same with "echo" followed by "cat".
Unbreaks t8001 and t8002 on OS X 10.6.7
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ml/test-readme:
t/README: unify documentation of test function args
|
|
* mg/rev-list-count-cherry:
rev-list --count: separate count for --cherry-mark
|
|
* jk/format-patch-multiline-header:
format-patch: wrap email addresses after long names
|
|
* jm/mergetool-submodules:
mergetool: Teach about submodules
|
|
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
|
Michael Schubert
Junio C Hamano
Johan Herland
Johannes Sixt
Boris Faure
Conrad Irwin
Jeff King
Jonathan Nieder
Brian Gernhardt