| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'--verbose-log' is one of the most useful and thus most frequently
used test options, but due to its length it's a pain to type on the
command line.
Let's introduce the corresponding short option '-V' to save some
keystrokes.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
As with urls, submodule paths with dashes are ignored by
git, but may end up confusing older versions. Detecting them
via fsck lets us prevent modern versions of git from being a
vector to spread broken .gitmodules to older versions.
Compared to blocking leading-dash urls, though, this
detection may be less of a good idea:
1. While such paths provide confusing and broken results,
they don't seem to actually work as option injections
against anything except "cd". In particular, the
submodule code seems to canonicalize to an absolute
path before running "git clone" (so it passes
/your/clone/-sub).
2. It's more likely that we may one day make such names
actually work correctly. Even after we revert this fsck
check, it will continue to be a hassle until hosting
servers are all updated.
On the other hand, it's not entirely clear that the behavior
in older versions is safe. And if we do want to eventually
allow this, we may end up doing so with a special syntax
anyway (e.g., writing "./-sub" in the .gitmodules file, and
teaching the submodule code to canonicalize it when
comparing).
So on balance, this is probably a good protection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Urls with leading dashes can cause mischief on older
versions of Git. We should detect them so that they can be
rejected by receive.fsckObjects, preventing modern versions
of git from being a vector by which attacks can spread.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/submodule-core-worktree-revert:
Revert "Merge branch 'sb/submodule-core-worktree'"
|
|
The earlier attempt barfed when given a CONTENT_LENGTH that is
set to an empty string. RFC 3875 is fairly clear that in this
case we should not read any message body, but we've been reading
through to the EOF in previous versions (which did not even pay
attention to the environment variable), so keep that behaviour for
now in this late update.
* mk/http-backend-content-length:
http-backend: allow empty CONTENT_LENGTH
|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.
However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.
Add a test for the case.
Reported-By: Jelmer Vernooij <jelmer@jelmer.uk>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test linter code has learned that the end of here-doc mark
"EOF" can be quoted in a double-quote pair, not just in a
single-quote pair.
* es/chain-lint-more:
chainlint: match "quoted" here-doc tags
|
|
Portability fix.
* ab/portable-more:
tests: fix non-portable iconv invocation
tests: fix non-portable "${var:-"str"}" construct
tests: fix and add lint for non-portable grep --file
tests: fix version-specific portability issue in Perl JSON
tests: use shorter labels in chainlint.sed for AIX sed
tests: fix comment syntax in chainlint.sed for AIX sed
tests: fix and add lint for non-portable seq
tests: fix and add lint for non-portable head -c N
|
|
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
|
|
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
|
|
Let's say you have the following three trees, where Base is from one commit
behind either master or branch:
Base : bar_v1, foo/{file1, file2, file3}
branch: bar_v2, foo/{file1, file2}, goo/file3
master: bar_v3, foo/{file1, file2, file3}
Using git-am (or am-based rebase) to apply the changes from branch onto
master results in the following tree:
Result: bar_merged, goo/{file1, file2, file3}
This is not what users want; they did not rename foo/ -> goo/, they only
renamed one file within that directory. The reason this happens is am
constructs fake trees (via build_fake_ancestor()) of the following form:
Base_bfa : bar_v1, foo/file3
branch_bfa: bar_v2, goo/file3
Combining these two trees with master's tree:
master: bar_v3, foo/{file1, file2, file3},
You can see that merge_recursive_generic() would see branch_bfa as renaming
foo/ -> goo/, and master as just adding both foo/file1 and foo/file2. As
such, it ends up with goo/{file1, file2, file3}
The core problem is that am does not have access to the original trees; it
can only construct trees using the blobs involved in the patch. As such,
it is not safe to perform directory rename detection within am -3.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to commit 16346883ab ("t3401: add directory rename testcases for
rebase and am", 2018-06-27), add another testcase for directory rename
detection. This new testcase differs in that it showcases a situation
where no directory rename was performed, but which some backends
incorrectly detect.
As with the other testcase, run this in conjunction with each of the
types of rebases:
git-rebase--interactive
git-rebase--am
git-rebase--merge
and also use the same testcase for
git am --3way
Reported-by: Nikolay Kasyanov <corrmage@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A here-doc tag can be quoted ('EOF'/"EOF") or escaped (\EOF) to suppress
interpolation within the body. chainlint recognizes single-quoted and
escaped tags, but does not know about double-quoted tags. For
completeness, teach it to recognize double-quoted tags, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The iconv that comes with a FreeBSD 11.2-RELEASE-p2 box I have access
to doesn't support the SHIFT-JIS encoding. Guard a test added in
e92d62253 ("convert: add round trip check based on
'core.checkRoundtripEncoding'", 2018-04-15) first released with Git
v2.18.0 with a prerequisite that checks for its availability.
The iconv command is in POSIX, and we have numerous tests
unconditionally relying on its ability to convert ASCII, UTF-8 and
UTF-16, but unconditionally relying on the presence of more obscure
encodings isn't portable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On both AIX 7200-00-01-1543 and FreeBSD 11.2-RELEASE-p2 the
"${var:-"str"}" syntax means something different than what it does
under the bash or dash shells.
Both will consider the start of the new unescaped quotes to be a new
argument to test_expect_success, resulting in the following error:
error: bug in the test script: 'git diff-tree initial # magic
is (not' does not look like a prereq
Fix this by removing the redundant quotes. There's no need for them,
and the resulting code works under all the aforementioned shells. This
fixes a regression in c2f1d3989 ("t4013: test new output from diff
--abbrev --raw", 2017-12-03) first released with Git v2.16.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* sg/test-rebase-editor-fix:
t/lib-rebase.sh: support explicit 'pick' commands in 'fake_editor.sh'
|
|
Test fixes.
* ab/test-must-be-empty-for-master:
t6018-rev-list-glob: fix 'empty stdin' test
|
|
Test fixes.
* sg/t3420-autostash-fix:
t3420-rebase-autostash: don't try to grep non-existing files
|
|
Test fixes.
* sg/t3903-missing-fix:
t3903-stash: don't try to grep non-existing file
|
|
Test fixes.
* sg/t7501-thinkofix:
t7501-commit: drop silly command substitution
|
|
Test fixes.
* sg/t0020-conversion-fix:
t0020-crlf: check the right file
|
|
Test fixes.
* sg/t4051-fix:
t4051-diff-function-context: read the right file
|
|
Dev tool update.
* jk/use-compat-util-in-test-tool:
test-tool.h: include git-compat-util.h
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
"git worktree" command learned "--quiet" option to make it less
verbose.
* ep/worktree-quiet-option:
worktree: add --quiet option
|
|
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
|
|
The --file option to grep isn't in POSIX[1], but -f is[1]. Let's check
for that in the future, and fix the portability regression in
f237c8b6fe ("commit-graph: implement git-commit-graph write",
2018-04-02) that broke e.g. AIX.
1. http://pubs.opengroup.org/onlinepubs/009695399/utilities/grep.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test guarded by PERLJSON added in 75459410ed ("json_writer: new
routines to create JSON data", 2018-07-13) assumed that a JSON boolean
value like "true" or "false" would be represented as "1" or "0" in
Perl.
This behavior can't be relied upon, e.g. with JSON.pm 2.50 and
JSON::PP. A JSON::PP::Boolean object will be represented as "true"
or "false". To work around this let's check if we have any refs left
after we check for hashes and arrays, assume those are JSON objects,
and coerce them to a known boolean value.
The behavior of this test still looks odd to me. Why implement our own
ad-hoc encoder just for some one-off test, as opposed to say Perl's
own Data::Dumper with Sortkeys et al? But with this change it works,
so let's leave it be.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the portability of chainlint by using shorter labels. On
AIX sed will complain about:
sed: 0602-417 The label :hereslurp is greater than eight
characters
This, in combination with the previous fix to this file makes
GIT_TEST_CHAIN_LINT=1 (which is the default) working again on AIX
without issues, and the "gmake check-chainlint" test also passes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a comment in chainlint.sed to appease AIX sed, which would
previously print this error:
sed: # stash for later printing is not a recognized function
1. https://public-inbox.org/git/CAPig+cTTbU5HFMKgNyrxTp3+kcK46-Fn=4ZH6zDt1oQChAc3KA@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The seq command is not in POSIX, and doesn't exist on
e.g. OpenBSD. We've had the test_seq wrapper since d17cf5f3a3 ("tests:
Introduce test_seq", 2012-08-04), but use of it keeps coming back,
e.g. in the recently added "fetch negotiator" tests being added here.
So let's also add a check to "make test-lint". The regex is aiming to
capture the likes of $(seq ..) and "seq" as a stand-alone command,
without capturing some existing cases where we e.g. have files called
"seq", as \bseq\b would do.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "head -c BYTES" option is non-portable (not in POSIX[1]). Change
such invocations to use the test_copy_bytes wrapper added in
48860819e8 ("t9300: factor out portable "head -c" replacement",
2016-06-30).
This fixes a test added in 9d2e330b17 ("ewah_read_mmap: bounds-check
mmap reads", 2018-06-14), which has been breaking
t5310-pack-bitmaps.sh on OpenBSD since 2.18.0. The OpenBSD ports
already have a similar workaround after their upgrade to 2.18.0[2].
I have not tested this on IRIX, but according to 4de0bbd898 ("t9300:
use perl "head -c" clone in place of "dd bs=1 count=16000" kluge",
2010-12-13) this invocation would have broken things there too.
Also, change a valgrind-specific codepath in test-lib.sh to use this
wrapper. Given where valgrind runs I don't think this would ever
become a portability issue in practice, but it's easier to just use
the wrapper than introduce some exception for the "make test-lint"
check being added here.
1. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/head.html
2. https://github.com/openbsd/ports/commit/08d5d82eaefe5cf2f125ecc0c6a57df9cf91350c#diff-f7d3c4fabeed1691620d608f1534f5e5
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The verbose output of the test 'reword without issues functions as
intended' in 't3423-rebase-reword.sh', added in a9279c6785 (sequencer:
do not squash 'reword' commits when we hit conflicts, 2018-06-19),
contains the following error output:
sed: -e expression #1, char 2: extra characters after command
This error comes from within the 'fake-editor.sh' script created by
'lib-rebase.sh's set_fake_editor() function, and the root cause is the
FAKE_LINES="pick 1 reword 2" variable in the test in question, in
particular the "pick" word. 'fake-editor.sh' assumes 'pick' to be the
default rebase command and doesn't support an explicit 'pick' command
in FAKE_LINES. As a result, 'pick' will be used instead of a line
number when assembling the following 'sed' script:
sed -n picks/^pick/pick/p
which triggers the aforementioned error.
Luckily, this didn't affect the test's correctness: the erroring 'sed'
command doesn't write anything to the todo script, and processing the
rest of FAKE_LINES generates the desired todo script, as if that
'pick' command were not there at all.
The minimal fix would be to remove the 'pick' word from FAKE_LINES,
but that would leave us susceptible to similar issues in the future.
Instead, teach the fake-editor script to recognize an explicit 'pick'
command, which is still a fairly trivial change.
In the future we might want to consider reinforcing this fake editor
script with an &&-chain and stricter parsing of the FAKE_LINES
variable (e.g. to error out when encountering unknown rebase commands
or commands and line numbers in the wrong order).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several tests in 't3420-rebase-autostash.sh' start various rebase
processes that are expected to fail because of merge conflicts. These
tests then run '! grep' to ensure that the autostash feature did its
job, and the dirty contents of a file is gone. However, due to the
test repo's history and the choice of upstream branch that file
shouldn't exist in the conflicted state at all. Consequently, this
'grep' doesn't fail as expected, because it can't find the dirty
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding unexpected errors from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test 'store updates stash ref and reflog' in 't3903-stash.sh'
creates a stash from a new file, runs 'git reset --hard' to throw away
any modifications to the work tree, and then runs '! grep' to ensure
that the staged contents are gone. Since the file didn't exist
before, it shouldn't exist after 'git reset' either. Consequently,
this 'grep' doesn't fail as expected, because it can't find the staged
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding an unexpected error from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a recent update in 2.18 era, "git pack-objects" started
producing a larger than necessary packfiles by missing
opportunities to use large deltas.
* nd/pack-deltify-regression-fix:
pack-objects: fix performance issues on packing large deltas
|
|
Prior to d3c6751b18 (tests: make use of the test_must_be_empty
function, 2018-07-27), in the test 'rev-list should succeed with empty
output on empty stdin' in 't6018-rev-list-glob' the empty 'expect'
file served dual purpose: besides specifying the expected output, as
usual, it also served as empty input for 'git rev-list --stdin'.
Then d3c6751b18 came along, and, as part of the conversion to
'test_must_be_empty', removed this empty 'expect' file, not realizing
its secondary purpose. Redirecting stdin from the now non-existing
file failed the test, but since this test expects failure in the first
place, this issue went unnoticed.
Redirect 'git rev-list's stdin explicitly from /dev/null to provide
empty input. (Strictly speaking we don't need this redirection,
because the test script's stdin is already redirected from /dev/null
anyway, but I think it's better to be explicit about it.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test ' context does not include preceding empty lines' in the
block of tests 'change with long common tail and no context' in
't4051-diff-function-context.sh' tries to read the file
'long_common_tail.diff.diff', but that file doesn't exist as its name
contains one more '.diff' suffixes than necessary.
Despite this error the test still succeeded without checking what it's
supposed to, because this erroneous read is done on the line:
test "$(first_context_line <long_common_tail.diff.diff)" != " "
which means that:
- the command substitution hides the error, so it won't fail the
test, and
- the result of the command substitution is the empty string, which
is, of course, not equal to a single space character, so the
condition is fulfilled, and the test succeeds.
As a minimal fix, fix the name of the file to be read.
In the future we might want to reorganize this test script (1) to use
'test_cmp' instead of 'test's and command substitutions to catch
failing commands and to provide helpful error messages, and (2) to
specify what the expected result actually _is_ instead of what it
isn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test 'checkout with autocrlf=input' in 't0020-crlf.sh', one of
the 'has_cr' checks looks at the non-existing file 'two' instead of
'dir/two'. The test still succeeds, without actually checking what it
was supposed to, because this check is expected to fail anyway.
As a minimal fix, fix the name of the file to be checked.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test '--dry-run with conflicts fixed from a merge' in
't7501-commit.sh', added in 8dc874b2ee (wt-status.c: set commitable
bit if there is a meaningful merge., 2016-02-15), runs the following
unnecessary and downright bogus command substitution:
! $(git merge --no-commit commit-1) &&
I.e. after 'git merge ...' is executed and expectedly fails, the test
attempts to execute its output:
Merging:
80f2ea2 commit 2
virtual commit-1
found 1 common ancestor:
e60d113 Initial commit
Auto-merging test-file
CONFLICT (content): Merge conflict in test-file
Automatic merge failed; fix conflicts and then commit the result.
as a command, which most likely fails, because there is no such
command as "Merging:". Then '!' negates the failed exit status, the
test continues, and eventually succeeds.
Remove this command substitution and use 'test_must_fail' to ensure
that 'git merge' fails.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test-tool programs include "test-tool.h" as their first
include, which breaks our CodingGuideline of "the first
include must be git-compat-util.h or an equivalent".
Rather than change them all, let's instead make test-tool.h
one of those equivalents, just like we do for builtin.h
(which many of the actual git builtins include first).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
SZEDER Gábor
Junio C Hamano
Jeff King
Jonathan Nieder
Max Kirillov
Elijah Newren
Eric Sunshine
Ævar Arnfjörð Bjarmason