| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This behavior of git-rev-parse is observed since git 1.8.3.1
at least(*), and likely earlier versions.
At least one git-reliant project in-the-wild relies on this
current behavior of git-rev-parse being able to handle multiple
--since= arguments without squeezing identical results together.
So add a test to prevent the potential for regression in
downstream projects.
(*) 1.8.3.1 the version packaged for CentOS 7.x
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* pb/blame-funcname-range-userdiff:
annotate-tests: quote variable expansions containing path names
|
|
A perf script was made more portable.
* jk/p5303-sed-portability-fix:
p5303: avoid sed GNU-ism
|
|
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
|
|
Test update.
* ar/t6016-modernise:
t6016: move to lib-log-graph.sh framework
|
|
Code clean-up.
* ma/t1300-cleanup:
t1300: don't needlessly work with `core.foo` configs
t1300: remove duplicate test for `--file no-such-file`
t1300: remove duplicate test for `--file ../foo`
|
|
A 3-year old test that was not testing anything useful has been
corrected.
* fc/t6030-bisect-reset-removes-auxiliary-files:
test: bisect-porcelain: fix location of files
|
|
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
* jk/log-cherry-pick-duplicate-patches:
patch-ids: handle duplicate hashmap entries
|
|
Newline characters in the host and path part of git:// URL are
now forbidden.
* jk/forbid-lf-in-git-url:
fsck: reject .gitmodules git:// urls with newlines
git_connect_git(): forbid newlines in host and path
|
|
Test fix.
* ad/t4129-setfacl-target-fix:
t4129: fix setfacl-related permissions failure
|
|
Test fix.
* jk/t5516-deflake:
t5516: loosen "not our ref" error check
|
|
Fix 2.29 regression where "git mergetool --tool-help" fails to list
all the available tools.
* pb/mergetool-tool-help-fix:
mergetool--lib: fix '--tool-help' to correctly show available tools
|
|
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
|
|
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
|
|
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
|
|
Test fix.
* nk/perf-fsmonitor-cleanup:
p7519: allow running without watchman prereq
|
|
"git fetch --recurse-submodules" fix (second attempt).
* pk/subsub-fetch-fix-take-2:
submodules: fix of regression on fetching of non-init subsub-repo
|
|
The test case added by 9466e3809d ("blame: enable funcname blaming with
userdiff driver", 2020-11-01) forgot to quote variable expansions. This
causes failures when the current directory contains blanks.
One variable that the test case introduces will not have IFS characters
and could remain without quotes, but let's quote all expansions for
consistency, not just the one that has the path name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using "1~5" isn't portable. Nobody seems to have noticed, since perhaps
people don't tend to run the perf suite on more exotic platforms. Still,
it's better to set a good example.
We can use:
perl -ne 'print if $. % 5 == 1'
instead. But we can further observe that perl does a good job of the
other parts of this pipeline, and fold the whole thing together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a bug introduced in dfb7a1b4d0 (patch-ids: stop using a
hand-rolled hashmap implementation, 2016-07-29) in which
git rev-list --cherry-pick A...B
will fail to suppress commits reachable from A even if a commit with
matching patch-id appears in B.
Around the time of that commit, the algorithm for "--cherry-pick" looked
something like this:
0. Traverse all of the commits, marking them as being on the left or
right side of the symmetric difference.
1. Iterate over the left-hand commits, inserting a patch-id struct for
each into a hashmap, and pointing commit->util to the patch-id
struct.
2. Iterate over the right-hand commits, checking which are present in
the hashmap. If so, we exclude the commit from the output _and_ we
mark the patch-id as "seen".
3. Iterate again over the left-hand commits, checking whether
commit->util->seen is set; if so, exclude them from the output.
At the end, we'll have eliminated commits from both sides that have a
matching patch-id on the other side. But there's a subtle assumption
here: for any given patch-id, we must have exactly one struct
representing it. If two commits from A both have the same patch-id and
we allow duplicates in the hashmap, then we run into a problem:
a. In step 1, we insert two patch-id structs into the hashmap.
b. In step 2, our lookups will find only one of these structs, so only
one "seen" flag is marked.
c. In step 3, one of the commits in A will have its commit->util->seen
set, but the other will not. We'll erroneously output the latter.
Prior to dfb7a1b4d0, our hashmap did not allow duplicates. Afterwards,
it used hashmap_add(), which explicitly does allow duplicates.
At that point, the solution would have been easy: when we are about to
add a duplicate, skip doing so and return the existing entry which
matches. But it gets more complicated.
In 683f17ec44 (patch-ids: replace the seen indicator with a commit
pointer, 2016-07-29), our step 3 goes away entirely. Instead, in step 2,
when the right-hand side finds a matching patch_id from the left-hand
side, we can directly mark the left-hand patch_id->commit to be omitted.
Solving that would be easy, too; there's a one-to-many relationship of
patch-ids to commits, so we just need to keep a list.
But there's more. Commit b3dfeebb92 (rebase: avoid computing unnecessary
patch IDs, 2016-07-29) built on that by lazily computing the full
patch-ids. So we don't even know when adding to the hashmap whether two
commits truly have the same id. We'd have to tentatively assign them a
list, and then possibly split them apart (possibly into N new structs)
at the moment we compute the real patch-ids. This could work, but it's
complicated and error-prone.
Instead, let's accept that we may store duplicates, and teach the lookup
side to be more clever. Rather than asking for a single matching
patch-id, it will need to iterate over all matching patch-ids. This does
mean examining every entry in a single hash bucket, but the worst-case
for a hash lookup was already doing that.
We'll keep the hashmap details out of the caller by providing a simple
iteration interface. We can retain the simple has_commit_patch_id()
interface for the other callers, but we'll simplify its return value
into an integer, rather than returning the patch_id struct. That way
they won't be tempted to look at the "commit" field of the return value
without iterating.
Reported-by: Arnaud Morin <arnaud.morin@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 014ade7484 (upload-pack: send ERR packet for non-tip objects,
2019-04-13) added a test that greps the output of a failed fetch to make
sure that upload-pack sent us the ERR packet we expected. But checking
this is racy; despite the argument in that commit, the client may still
be sending a "done" line after the server exits, causing it to die() on
a failed write() and never see the ERR packet at all.
This fails quite rarely on Linux, but more often on macOS. However, it
can be triggered reliably with:
diff --git a/fetch-pack.c b/fetch-pack.c
index 876f90c759..cf40de9092 100644
--- a/fetch-pack.c
+++ b/fetch-pack.c
@@ -489,6 +489,7 @@ static int find_common(struct fetch_negotiator *negotiator,
done:
trace2_region_leave("fetch-pack", "negotiation_v0_v1", the_repository);
if (!got_ready || !no_done) {
+ sleep(1);
packet_buf_write(&req_buf, "done\n");
send_request(args, fd[1], &req_buf);
}
This is a real user-visible race that it would be nice to fix, but it's
tricky to do so: the client would have to speculatively try to read an
ERR packet after hitting a write() error. And at least for this error,
it's specific to v0 (since v2 does not enforce reachability at all).
So let's loosen the test to avoid annoying racy failures. If we
eventually do the read-after-failed-write thing, we can tighten it. And
if not, v0 will grow increasingly obsolete as servers support v2, so the
utility of this test will decrease over time anyway.
Note that we can still check stderr to make sure upload-pack bailed for
the reason we expected. It writes a similar message to stderr, and
because the server side is just another process connected by pipes,
we'll reliably see it. This would not be the case for git://, or for
ssh servers that do not relay stderr (e.g., GitHub's custom endpoint
does not).
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running this test in Cygwin, it's necessary to remove the inherited
access control lists from the Git working directory in order for later
permissions tests to work as expected.
As such, fix an error in the test script so that the ACLs are set for
the working directory, not a nonexistent subdirectory.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git for-each-repo --config=X' should return success without calling any
subcommands when the config key 'X' has no value. The current
implementation instead segfaults.
A user could run into this issue if they used 'git maintenance start' to
initialize their cron schedule using 'git for-each-repo
--config=maintenance.repo ...' but then using 'git maintenance
unregister' to remove the config option. (Note: 'git maintenance stop'
would remove the config _and_ remove the cron schedule.)
Add a simple test to ensure this works. Use 'git help --no-such-option'
as the potential subcommand to ensure that we will hit a failure if the
subcommand is ever run.
Reported-by: Andreas Bühmann <dev@uuml.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the output of the likes of "git branch -l --sort=-objectsize"
to show the "(HEAD detached at <hash>)" message at the start of the
output. Before the compare_detached_head() function added in a
preceding commit we'd emit this output as an emergent effect.
It doesn't make any sense to consider the objectsize, type or other
non-attribute of the "(HEAD detached at <hash>)" message for the
purposes of sorting. Let's always emit it at the top instead. The only
reason it was sorted in the first place is because we're injecting it
into the ref-filter machinery so builtin/branch.c doesn't need to do
its own "am I detached?" detection.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e04 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288e (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the clone/fetch client side to reject a
git:// URL with a newline in it. Let's also catch these when fscking a
.gitmodules file, which will give an earlier warning.
Note that it would be simpler to just complain about newline in _any_
URL, but an earlier tightening for http/ftp made sure we kept allowing
newlines for unknown protocols (and this is covered in the tests). So
we'll stick to that precedent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we connect to a git:// server, we send an initial request that
looks something like:
002dgit-upload-pack repo.git\0host=example.com
If the repo path contains a newline, then it's included literally, and
we get:
002egit-upload-pack repo
.git\0host=example.com
This works fine if you really do have a newline in your repository name;
the server side uses the pktline framing to parse the string, not
newlines. However, there are many _other_ protocols in the wild that do
parse on newlines, such as HTTP. So a carefully constructed git:// URL
can actually turn into a valid HTTP request. For example:
git://localhost:1234/%0d%0a%0d%0aGET%20/%20HTTP/1.1 %0d%0aHost:localhost%0d%0a%0d%0a
becomes:
0050git-upload-pack /
GET / HTTP/1.1
Host:localhost
host=localhost:1234
on the wire. Again, this isn't a problem for a real Git server, but it
does mean that feeding a malicious URL to Git (e.g., through a
submodule) can cause it to make unexpected cross-protocol requests.
Since repository names with newlines are presumably quite rare (and
indeed, we already disallow them in git-over-http), let's just disallow
them over this protocol.
Hostnames could likewise inject a newline, but this is unlikely a
problem in practice; we'd try resolving the hostname with a newline in
it, which wouldn't work. Still, it doesn't hurt to err on the side of
caution there, since we would not expect them to work in the first
place.
The ssh and local code paths are unaffected by this patch. In both cases
we're trying to run upload-pack via a shell, and will quote the newline
so that it makes it intact. An attacker can point an ssh url at an
arbitrary port, of course, but unless there's an actual ssh server
there, we'd never get as far as sending our shell command anyway. We
_could_ similarly restrict newlines in those protocols out of caution,
but there seems little benefit to doing so.
The new test here is run alongside the git-daemon tests, which cover the
same protocol, but it shouldn't actually contact the daemon at all. In
theory we could make the test more robust by setting up an actual
repository with a newline in it (so that our clone would succeed if our
new check didn't kick in). But a repo directory with newline in it is
likely not portable across all filesystems. Likewise, we could check
git-daemon's log that it was not contacted at all, but we do not
currently record the log (and anyway, it would make the test racy with
the daemon's log write). We'll just check the client-side stderr to make
sure we hit the expected code path.
Reported-by: Harold Kim <h.kim@flatt.tech>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 83bbf9b92e (mergetool--lib: improve support for vimdiff-style tool
variants, 2020-07-29) introduced a regression in the output of `git mergetool
--tool-help` and `git difftool --tool-help` [1].
In function 'show_tool_names' in git-mergetool--lib.sh, we loop over the
supported mergetools and their variants and accumulate them in the variable
'variants', separating them with a literal '\n'.
The code then uses 'echo $variants' to turn these '\n' into newlines, but this
behaviour is not portable, it just happens to work in some shells, like
dash(1)'s 'echo' builtin.
For shells in which 'echo' does not turn '\n' into newlines, the end
result is that the only tools that are shown are the existing variants
(except the last variant alphabetically), since the variants are
separated by actual newlines in '$variants' because of the several
'echo' calls in mergetools/{bc,vimdiff}::list_tool_variants.
Fix this bug by embedding an actual line feed into `variants` in
show_tool_names(). While at it, replace `sort | uniq` by `sort -u`.
To prevent future regressions, add a simple test that checks that a few
known tools are correctly shown (let's avoid counting the total number
of tools to lessen the maintenance burden when new tools are added or if
'--tool-help' learns additional logic, like hiding tools depending on
the current platform).
[1] https://lore.kernel.org/git/CADtb9DyozjgAsdFYL8fFBEWmq7iz4=prZYVUdH9W-J5CKVS4OA@mail.gmail.com/
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Based-on-patch-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The last test of t4129 creates a directory and expects its setgid bit
(g+s) to be off. But this makes the test fail when the parent directory
has the bit set, as setgid's state is inherited by newly created
subdirectories.
One way to solve this problem is to allow the presence of this bit when
comparing the return of `test_modebits` with the expected value. But
then we may have the same problem in the future when other tests start
using `test_modebits` on directories (currently t4129 is the only one)
and forget about setgid. Instead, let's make the helper function more
robust with respect to the state of the setgid bit in the test directory
by removing this bit from the returning value. There should be no
problem with existing callers as no one currently expects this bit to be
on.
Note that the sticky bit (+t) and the setuid bit (u+s) are not
inherited, so we don't have to worry about those.
Reported-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further stress the --sort callback in ref-filter.c. The implementation
uses certain short-circuiting logic, let's make sure it behaves the
same way on e.g. name & version sort. Improves a test added in
aedcb7dc75e (branch.c: use 'ref-filter' APIs, 2015-09-23).
I don't think all of this output makes sense, but let's test for the
behavior as-is, we can fix bugs in it in a later commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
p7519 measures the performance of the fsmonitor code. To do this, it
uses the installed copy of Watchman. If Watchman isn't installed, a noop
integration script is installed in its place.
When in the latter mode, it is expected that the script should not write
a "last update token": in fact, it doesn't write anything at all since
the script is blank.
Commit 33226af42b (t/perf/fsmonitor: improve error message if typoing
hook name, 2020-10-26) made sure that running 'git update-index
--fsmonitor' did not write anything to stderr, but this is not the case
when using the empty Watchman script, since Git will complain that:
$ which watchman
watchman not found
$ cat .git/hooks/fsmonitor-empty
$ git -c core.fsmonitor=.git/hooks/fsmonitor-empty update-index --fsmonitor
warning: Empty last update token.
Prior to 33226af42b, the output wasn't checked at all, which allowed
this noop mode to work. But, 33226af42b breaks p7519 when running it
without a 'watchman(1)' on your system.
Handle this by only checking that the stderr is empty only when running
with a real watchman executable. Otherwise, assert that the error
message is the expected one when running in the noop mode.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t6016 manually reconstructs git log --graph output by using the reported
commit hashes from `git rev-parse`. Each tag is converted into an
environment variable manually, and then `echo`-ed to an expected output
file, which is in turn compared to the actual output.
The expected output is difficult to read and write, because, e.g.,
each line of output must be prefaced with echo, quoted, and properly
escaped. Additionally, the test is sensitive to trailing whitespace,
which may potentially be removed from graph log output in the future.
In order to reduce duplication, ease troubleshooting of failed tests by
improving readability, and ease the addition of more tests to this file,
port the operations to `lib-log-graph.sh`, which is already used in
several other tests, e.g., t4215. Give all merges a simple commit
message, and use a common `check_graph` macro taking a heredoc of the
expected output which does not required extensive escaping.
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use various made-up config keys in the "core" section for no real
reason. Change them to work in the "section" section instead and be
careful to also change "cores" to "sections". Make sure to also catch
"Core", "CoReS" and similar.
There are a few instances that actually want to work with a real "core"
config such as `core.bare` or `core.editor`. After this, it's clearer
that they work with "core" for a reason.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We test that we can handle `git config --file symlink` and the error
case of `git config --file symlink-to-missing-file`. For good measure,
we also throw in a test to check that we correctly handle referencing a
missing regular file. But we have such a test earlier in this script.
They both check that we fail to use `--file no-such-file --list`.
Drop the latter of these and keep the one that is in the general area
where we test `--file` and `GIT_CONFIG`. The one we're dropping also
checks that we can't even get a specific key from the missing file --
let's make sure we check that in the test we keep.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two tests for checking that we can handle `git config --file
../other-config ...`. One, using `--file`, was introduced in 65807ee697
("builtin-config: Fix crash when using "-f <relative path>" from
non-root dir", 2010-01-26), then another, using `GIT_CONFIG`, came about
in 270a34438b ("config: stop using config_exclusive_filename",
2012-02-16).
The latter of these was then converted to use `--file` in f7e8714101
("t: prefer "git config --file" to GIT_CONFIG", 2014-03-20). Both where
then simplified in a5db0b77b9 ("t1300: extract and use
test_cmp_config()", 2018-10-21).
These two tests differ slightly in the order of the options used, but
other than that, they are identical. Let's drop one. As noted in
f7e8714101, we do still have a test for `GIT_CONFIG` and it shares the
implementation with `--file`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for recent regression.
* nk/refspecs-negative-fix:
negative-refspec: improve comment on query_matches_negative_refspec
negative-refspec: fix segfault on : refspec
|
|
Hotfix for a topic of this cycle.
* ma/maintenance-crontab-fix:
t7900-maintenance: test for magic markers
gc: fix handling of crontab magic markers
git-maintenance.txt: add missing word
|
|
Fix to a regression introduced during this cycle.
* dl/checkout-p-merge-base:
checkout -p: handle tree arguments correctly again
|
|
Test coverage fix.
* js/no-more-prepare-for-main-in-test:
tests: drop the `PREPARE_FOR_MAIN_BRANCH` prereq
t9902: use `main` as initial branch name
t6302: use `main` as initial branch name
t5703: use `main` as initial branch name
t5510: use `main` as initial branch name
t5505: finalize transitioning to using the branch name `main`
t3205: finalize transitioning to using the branch name `main`
t3203: complete the transition to using the branch name `main`
t3201: finalize transitioning to using the branch name `main`
t3200: finish transitioning to the initial branch name `main`
t1400: use `main` as initial branch name
|
|
"git pack-redandant" when there is only one packfile used to crash,
which has been corrected.
* jx/pack-redundant-on-single-pack:
pack-redundant: fix crash when one packfile in repo
|
|
The logic added to check for negative pathspec match by c0192df630
(refspec: add support for negative refspecs, 2020-09-30) looks at
refspec->src assuming it is never NULL, however when
remote.origin.push is set to ":", then refspec->src is NULL,
causing a segfault within strcmp.
Tell git to handle matching refspec by adding the needle to the
set of positively matched refspecs, since matching ":" refspecs
match anything as src.
Add test for matching refspec pushes fetch-negative-refspec
both individually and in combination with a negative refspec.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we insert our "BEGIN" and "END" markers into the cron table, it's
so that a Git version from many years into the future would be able to
identify this region in the cron table. Let's add a test to make sure
that these markers don't ever change.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3c (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit ba7eafe146 (t6030: explicitly test for bisection cleanup,
2017-09-29) introduced checks for files in the $GIT_DIR directory, but
that variable is not always defined, and in this test file it's not.
Therefore these checks always passed regardless of the presence of these
files (unless the user has some /BISECT_LOG file, for some reason).
Let's check the files in the correct location.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff -I<pattern> -exit-code" should exit with 0 status when
all the changes match the ignored pattern, but it didn't.
* jc/diff-I-status-fix:
diff: correct interaction between --exit-code and -I<pattern>
|
|
Dev-support fix for BSD.
* es/perf-export-fix:
t/perf: fix test_export() failure with BSD `sed`
|
|
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
|
|
Test update.
* js/t7064-master-to-initial:
t7064: avoid relying on a specific default branch name
|
|
Test update.
* js/t6300-hardcode-main:
t6300: avoid using the default name of the initial branch
|
Eric Wong
Junio C Hamano
Johannes Sixt
Jeff King
Adam Dinwoodie
Derrick Stolee
Ævar Arnfjörð Bjarmason
Philippe Blain
Matheus Tavares
Taylor Blau
Antonio Russo
Martin Ågren
Nipunn Koorapati
Johannes Schindelin
Felipe Contreras