| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own. Because of this, "filter-branch" failed
to rewrite commits with ancient timestamps.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
|
|
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
|
|
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
|
|
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
|
|
"git apply" learned to wiggle the base version and perform three-way
merge when a patch does not exactly apply to the version you have.
* jc/apply-3way:
apply: tests for the --3way option
apply: document --3way option
apply: allow rerere() to work on --3way results
apply: register conflicted stages to the index
apply: --3way with add/add conflict
apply: move verify_index_match() higher
apply: plug the three-way merge logic in
apply: fall back on three-way merge
apply: accept -3/--3way command line option
apply: move "already exists" logic to check_to_create()
apply: move check_to_create_blob() closer to its sole caller
apply: further split load_preimage()
apply: refactor "previous patch" logic
apply: split load_preimage() helper function out
apply: factor out checkout_target() helper function
apply: refactor read_file_or_gitlink()
apply: clear_image() clears things a bit more
apply: a bit more comments on PATH_TO_BE_DELETED
apply: fix an incomplete comment in check_patch()
|
|
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
|
|
* pw/git-p4-move:
git p4: add support for 'p4 move' in P4Submit
git p4: refactor diffOpts calculation
|
|
Teach "git p4" to notice "Jobs:" in the log message and relay it to
Perforce to trigger its "jobs" support.
# By Pete Wyckoff
* pw/git-p4-jobs:
git p4: notice Jobs lines in git commit messages
git p4 test: refactor marshal_dump
git p4: remove unused P4Submit interactive setting
|
|
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
|
|
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
|
|
Fixes "git show"'s auto-walking behaviour, and make it behave just
like "git log" does when it walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
|
|
Teach "am --rebasing" codepath to grab authorship, log message and
the patch text directly out of existing commits. This will help
rebasing commits that have confusing "diff" output in their log
messages.
* mz/rebase-no-mbox:
am: don't call mailinfo if $rebasing
am --rebasing: get patch body from commit, not from mailbox
rebase --root: print usage on too many args
rebase: don't source git-sh-setup twice
|
|
For -M option (detectRenames) in P4Submit, use 'p4 move' rather
than 'p4 integrate'. Check Perforce server for exisitence of
'p4 move' and use it if present, otherwise revert to 'p4 integrate'.
[pw: wildcard-encode src/dest, add/update tests, tweak code]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running filter-branch on a history that has a commit with timestamp
at epoch used to fail, but it should have been fixed. Add test to
make sure it won't break again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We failed to use ce_namelen() equivalent and instead only compared
up to the CE_NAMEMASK bytes by mistake. Adding an overlong path
that shares the same common prefix as an existing entry in the index
did not add a new entry, but instead replaced the existing one, as
the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we do not have any pathspec, we typically disallow an
explicit "--only", because it makes no sense (your commit
would, by definition, be empty). But since 6a74642
(git-commit --amend: two fixes., 2006-04-20), we have
allowed "--amend --only" with the intent that it would amend
the commit, ignoring any contents staged in the index.
However, while that commit allowed the combination, we never
actually implemented the logic to make it work. The current
code notices that we have no pathspec and assumes we want to
do an as-is commit (i.e., the "--only" is ignored).
Instead, we must make sure to follow the partial-commit
code-path. We also need to tweak the list_paths function to
handle a NULL pathspec.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now we have all the necessary logic to fall back on three-way merge when
the patch does not cleanly apply, insert the conflicted entries to the
index as appropriate. This obviously triggers only when the "--index"
option is used.
When we fall back to three-way merge and some of the merges fail, just
like the case where the "--reject" option was specified and we had to
write some "*.rej" files out for unapplicable patches, exit the command
with non-zero status without showing the diffstat and summary. Otherwise
they would make the list of problematic paths scroll off the display.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Begin teaching the three-way merge fallback logic "git am -3" uses
to the underlying "git apply". It only implements the command line
parsing part, and does not do anything interesting yet, other than
making sure that "--reject" and "--3way" are not given together, and
making "--3way" imply "--index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit --amend" used on a commit with an empty message fails
unless -m is given, whether or not --allow-empty-message is
specified.
Allow it to proceed to the editor with an empty commit message.
Unless --allow-empty-message is in force, it will still abort later
if an empty message is saved from the editor (this check was
already necessary to prevent a non-empty commit message being edited
to an empty one).
Add a test for --amend --edit of an empty commit message which fails
without this fix, as it's a rare case that won't get frequently
tested otherwise.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We did not have test to make sure "git rebase" without extra options
filters out an empty commit in the original history.
* mz/empty-rebase-test:
add test case for rebase of empty commit
|
|
More "git p4" tests.
* pw/git-p4-tests:
git p4 test: fix badp4dir test
git p4 test: split up big t9800 test
git p4 test: cleanup_git should make a new $git
git p4 test: copy source indeterminate
git p4 test: check for error message in failed test
git p4 test: rename some "git-p4 command" strings
git p4 test: never create default test repo
git p4 test: simplify quoting involving TRASH_DIRECTORY
git p4 test: use real_path to resolve p4 client symlinks
git p4 test: wait longer for p4d to start and test its pid
|
|
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
|
|
"git checkout --detach", when you are still on an unborn branch,
should be forbidden, but it wasn't.
* cw/no-detaching-an-unborn:
git-checkout: disallow --detach on unborn branch
|
|
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
|
|
Expose the credential API to scripted Porcelain writers.
* mm/credential-plumbing:
git-remote-mediawiki: update comments to reflect credential support
git-remote-mediawiki: add credential support
git credential fill: output the whole 'struct credential'
add 'git credential' plumbing command
|
|
Teach git to read various information from $XDG_CONFIG_HOME/git/ to allow
the user to avoid cluttering $HOME.
* mm/config-xdg:
config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
config: read (but not write) from $XDG_CONFIG_HOME/git/config file
|
|
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
P4 has a feature called "jobs" that allows linking changes
to a bug tracking system or other tasks. When submitting
code, a job name can be specified to mark that this change
is associated with a particular job.
Teach git-p4 to find an optional "Jobs:" line in git commit
messages and use them to make a Jobs section in the p4
change specifitation.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function will be useful in future tests. Move it to
the git-p4 test library. Let it accept an optional argument
to pick a certain marshaled object out of the input stream.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The construct
VAR=value test_must_fail command args
works only for some shells (such as bash) but not others (such as dash)
because VAR=value does not end up in the environment for command when it
is called by the shell function test_must_fail. That is why we explicitly
set and export variable in a subshell, i.e.
(
VAR=value &&
export VAR &&
test_must_fail command args
)
in most places already, bar the newly introduced 57 from b64b7fe
(Add tests for rebase -i --root without --onto, 2012-06-26).
Make test 57 use that construct also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --single-branch" to clone a single branch did not limit
the cloning to the specified branch.
* nd/clone-single-fix:
clone: fix ref selection in --single-branch --branch=xxx
|
|
"git diff --no-index" did not correctly handle relative paths and
did not give correct exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
|
|
When we get disconnected while expecting a response from the remote
side because authentication failed, we issued an error message "The
remote side hung up unexpectedly."
Give hint that it may be a permission problem in the message when we
can reasonably suspect it.
* hv/remote-end-hung-up:
remove the impression of unexpectedness when access is denied
|
|
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
|
|
Teach "git submodule" deal with nested submodule structure where a
module is contained within a module whose origin is specified as a
relative URL to its superproject's origin.
|
|
Give finer classification to various states of paths in conflicted
state and offer advice messages in the "git status" output.
|
|
Teach "-x <cmd>" to "rebase -i" to insert "exec <cmd>" after each
commit in the resulting history.
|
|
"pack-objects" learned to read large loose blobs using the streaming API,
without the need to hold everything in core at once.
|
|
Use streaming API to read from the object store to avoid having to hold
a large blob object in-core while running index-pack.
|
|
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
|
|
The construct used to get the return code was flawed, in that
errors in the &&-chain before the semicolon were not caught. Use
the standard test_expect_code instead.
Set PATH in a subshell instead of relying on the bashism of
setting it just for a single command.
And fix the grep line so it doesn't worry about grep segfaults,
and doesn't fail for i18n issues.
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For convenience, leave one in place at the end of each
test so that it is not necessary to build a new one. This
makes it consistent with $cli.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure the test fails for the expected reason.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the actual command name; git-p4 is gone.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Gary Gibbons
Jeff King
Chris Webb
Torsten Bögershausen
Pete Wyckoff
Michael J Gruber