| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git add -i --dry-run" does not dry-run, which was surprising. The
combination of options has taught to error out.
* ow/no-dryrun-in-add-i:
add: die if both --dry-run and --interactive are given
|
|
"git p4" learned to find branch points more efficiently.
* jk/p4-locate-branch-point-optim:
git-p4: speed up search for branch parent
git-p4: ensure complex branches are cloned correctly
|
|
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
|
|
The word-diff mode has been taught to work better with a word
regexp that can match an empty string.
* pw/word-diff-zero-width-matches:
word diff: handle zero length matches
|
|
The way the command line specified by the trailer.<token>.command
configuration variable receives the end-user supplied value was
both error prone and misleading. An alternative to achieve the
same goal in a safer and more intuitive way has been added, as
the trailer.<token>.cmd configuration variable, to replace it.
* zh/trailer-cmd:
trailer: add new .cmd config option
docs: correct descript of trailer.<token>.command
|
|
Various test and documentation updates about .gitsomething paths
that are symlinks.
* jk/symlinked-dotgitx-cleanup:
docs: document symlink restrictions for dot-files
fsck: warn about symlinked dotfiles we'll open with O_NOFOLLOW
t0060: test ntfs/hfs-obscured dotfiles
t7450: test .gitmodules symlink matching against obscured names
t7450: test verify_path() handling of gitmodules
t7415: rename to expand scope
fsck_tree(): wrap some long lines
fsck_tree(): fix shadowed variable
t7415: remove out-dated comment about translation
|
|
Options to "git pack-objects" that take numeric values like
--window and --depth should not accept negative values; the input
validation has been tightened.
* jk/pack-objects-negative-options-fix:
pack-objects: clamp negative depth to 0
t5316: check behavior of pack-objects --depth=0
pack-objects: clamp negative window size to 0
t5300: check that we produced expected number of deltas
t5300: modernize basic tests
|
|
"git submodule update --quiet" did not propagate the quiet option
down to underlying "git fetch", which has been corrected.
* nc/submodule-update-quiet:
submodule update: silence underlying fetch with "--quiet"
|
|
"git bisect skip" when custom words are used for new/old did not
work, which has been corrected.
* rj/bisect-skip-honor-terms:
bisect--helper: use BISECT_TERMS in 'bisect skip' command
|
|
"git repack -A -d" in a partial clone unnecessarily loosened
objects in promisor pack.
* rs/repack-without-loosening-promised-objects:
repack: avoid loosening promisor objects in partial clones
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
Fix tests when forced to use v0 protocol.
* ll/clone-reject-shallow:
t5601: mark protocol v2-only test
|
|
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
|
|
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
|
|
Test clean-up.
* ab/svn-tests-set-e-fix:
svn tests: refactor away a "set -e" in test body
svn tests: remove legacy re-setup from init-clone test
|
|
"git rebase --[no-]reschedule-failed-exec" did not work well with
its configuration variable, which has been corrected.
* ab/rebase-no-reschedule-failed-exec:
rebase: don't override --no-reschedule-failed-exec with config
rebase tests: camel-case rebase.rescheduleFailedExec consistently
|
|
"git add" and "git rm" learned not to touch those paths that are
outside of sparse checkout.
* mt/add-rm-in-sparse-checkout:
rm: honor sparse checkout patterns
add: warn when asked to update SKIP_WORKTREE entries
refresh_index(): add flag to ignore SKIP_WORKTREE entries
pathspec: allow to ignore SKIP_WORKTREE entries on index matching
add: make --chmod and --renormalize honor sparse checkouts
t3705: add tests for `git add` in sparse checkouts
add: include magic part of pathspec on --refresh error
|
|
Replace GIT_CONFIG_NOSYSTEM mechanism to decline from reading the
system-wide configuration file with GIT_CONFIG_SYSTEM that lets
users specify from which file to read the system-wide configuration
(setting it to an empty file would essentially be the same as
setting NOSYSTEM), and introduce GIT_CONFIG_GLOBAL to override the
per-user configuration in $HOME/.gitconfig.
* ps/config-global-override:
t1300: fix unset of GIT_CONFIG_NOSYSTEM leaking into subsequent tests
config: allow overriding of global and system configuration
config: unify code paths to get global config paths
config: rename `git_etc_config()`
|
|
"git log --format=..." placeholders learned %ah/%ch placeholders to
request the --date=human output.
* zh/pretty-date-human:
pretty: provide human date format
|
|
Cygwin pathname handling fix.
* ad/cygwin-no-backslashes-in-paths:
cygwin: disallow backslashes in file names
|
|
When the reachability bitmap is in effect, the "do not lose
recently created objects and those that are reachable from them"
safety to protect us from races were disabled by mistake, which has
been corrected.
* jk/prune-with-bitmap-fix:
prune: save reachable-from-recent objects with bitmaps
pack-bitmap: clean up include_check after use
|
|
Tweak a few tests for "log --format=..." that show timestamps in
various formats.
* ab/pretty-date-format-tests:
pretty tests: give --date/format tests a better description
pretty tests: simplify %aI/%cI date format test
|
|
"git --config-env var=val cmd" weren't accepted (only
--config-env=var=val was).
* ps/config-env-option-with-separate-value:
git: support separate arg for `--config-env`'s value
git.txt: fix synopsis of `--config-env` missing the equals sign
|
|
The interactive machinery does not obey --dry-run. Die appropriately
if both flags are passed.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When importing a branch from p4, git-p4 searches the history of the parent
branch for the branch point. The test for the complex branch structure
ensures all files have the expected contents, but doesn't examine the
branch structure.
Check for the correct branch structure by making sure that the initial
commit on each branch is empty. This ensures that the initial commit's
parent is indeed the correct branch-off point.
Signed-off-by: Joachim Kuebart <joachim.kuebart@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If find_word_boundaries() encounters a zero length match (which can be
caused by matching a newline or using '*' instead of '+' in the regex)
we stop splitting the input into words which generates an inaccurate
diff. To fix this increment the start point when there is a zero
length match and try a new match. This is safe as posix regular
expressions always return the longest available match so a zero length
match means there are no longer matches available from the current
position.
Commit bf82940dbf1 (color-words: enable REG_NEWLINE to help user,
2009-01-17) prevented matching newlines in negated character classes
but it is still possible for the user to have an explicit newline
match in the regex which could cause a zero length match.
One could argue that having explicit newline matches or using '*'
rather than '+' are user errors but it seems to be better to work
round them than produce inaccurate diffs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A HTTP-clone test introduced in 4fe788b1b0 ("builtin/clone.c: add
--reject-shallow option", 2021-04-01) only works in protocol v2, but is
not marked as such.
The aforementioned patch implements --reject-shallow for a variety of
situations, but usage of a protocol that requires a remote helper is not
one of them. (Such an implementation would require extending the remote
helper protocol to support the passing of a "reject shallow" option, and
then teaching it to both protocol-speaking ends.)
For now, to make it pass when GIT_TEST_PROTOCOL_VERSION=0 is passed, add
"-c protocol.version=2". A more complete solution would be either to
augment the remote helper protocol to support this feature or to return
a fatal error when using --reject-shallow with a protocol that uses a
remote helper.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `trailer.<token>.command` configuration variable
specifies a command (run via the shell, so it does not have
to be a single name or path to the command, but can be a
shell script), and the first occurrence of substring $ARG is
replaced with the value given to the `interpret-trailer`
command for the token in a '--trailer <token>=<value>' argument.
This has three downsides:
* The use of $ARG in the mechanism misleads the users that
the value is passed in the shell variable, and tempt them
to use $ARG more than once, but that would not work, as
the second and subsequent $ARG are not replaced.
* Because $ARG is textually replaced without regard to the
shell language syntax, even '$ARG' (inside a single-quote
pair), which a user would expect to stay intact, would be
replaced, and worse, if the value had an unmatched single
quote (imagine a name like "O'Connor", substituted into
NAME='$ARG' to make it NAME='O'Connor'), it would result in
a broken command that is not syntactically correct (or
worse).
* The first occurrence of substring `$ARG` will be replaced
with the empty string, in the command when the command is
first called to add a trailer with the specified <token>.
This is a bad design, the nature of automatic execution
causes it to add a trailer that we don't expect.
Introduce a new `trailer.<token>.cmd` configuration that
takes higher precedence to deprecate and eventually remove
`trailer.<token>.command`, which passes the value as an
argument to the command. Instead of "$ARG", users can
refer to the value as positional argument, $1, in their
scripts. At the same time, in order to allow
`git interpret-trailers` to better simulate the behavior
of `git command -s`, 'trailer.<token>.cmd' will not
automatically execute.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the commits merged in via 204333b015 (Merge branch
'jk/open-dotgitx-with-nofollow', 2021-03-22), we stopped following
symbolic links for .gitattributes, .gitignore, and .mailmap files.
Let's teach fsck to warn that these symlinks are not going to do
anything. Note that this is just a warning, and won't block the objects
via transfer.fsckObjects, since there are reported to be cases of this
in the wild (and even once fixed, they will continue to exist in the
commit history of those projects, but are not particularly dangerous).
Note that we won't add these to the existing gitmodules block in the
fsck code. The logic for gitmodules is a bit more complicated, as we
also check the content of non-symlink instances we find. But for these
new files, there is no content check; we're just looking at the name and
mode of the tree entry (and we can avoid even the complicated name
checks in the common case that the mode doesn't indicate a symlink).
We can reuse the test helper function we defined for .gitmodules, though
(it needs some slight adjustments for the fsck error code, and because
we don't block these symlinks via verify_path()).
Note that I didn't explicitly test the transfer.fsckObjects case here
(nor does the existing .gitmodules test that it blocks a push). The
translation of fsck severities to outcomes is covered in general in
t5504.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have tests that cover various filesystem-specific spellings of
".gitmodules", because we need to reliably identify that path for some
security checks. These are from dc2d9ba318 (is_{hfs,ntfs}_dotgitmodules:
add tests, 2018-05-12), with the actual code coming from e7cb0b4455
(is_ntfs_dotgit: match other .git files, 2018-05-11) and 0fc333ba20
(is_hfs_dotgit: match other .git files, 2018-05-02).
Those latter two commits also added similar matching functions for
.gitattributes and .gitignore. These ended up not being used in the
final series, and are currently dead code. But in preparation for them
being used in some fsck checks, let's make sure they actually work by
throwing a few basic tests at them. Likewise, let's cover .mailmap
(which does need matching code added).
I didn't bother with the whole battery of tests that we cover for
.gitmodules. These functions are all based on the same generic matcher,
so it's sufficient to test most of the corner cases just once.
Note that the ntfs magic prefix names in the tests come from the
algorithm described in e7cb0b4455 (and are different for each file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t7450 we check that both verify_path() and fsck catch malformed
.gitmodules entries in trees. However, we don't check that we catch
filesystem-equivalent forms of these (e.g., ".GITMOD~1" on Windows).
Our name-matching functions are exercised well in t0060, but there's
nothing to test that we correctly call the matching functions from the
actual fsck and verify_path() code.
So instead of testing just .gitmodules, let's repeat our tests for a few
basic cases. We don't need to be exhaustive here (t0060 handles that),
but just make sure we hit one name of each type.
Besides pushing the tests into a function that takes the path as a
parameter, we'll need to do a few things:
- adjust the directory name to accommodate the tests running multiple
times
- set core.protecthfs for index checks. Fsck always protects all types
by default, but we want to be able to exercise the HFS routines on
every system. Note that core.protectntfs is already the default
these days, but it doesn't hurt to explicitly label our need for it.
- we'll also take the filename ("gitmodules") as a parameter. All
calls use the same name for now, but a future patch will extend this
to handle other .gitfoo files. Note that our fake-content symlink
destination is somewhat .gitmodules specific. But it isn't necessary
for other files (which don't do a content check). And it happens to
be a valid attribute and ignore file anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 10ecfa7649 (verify_path: disallow symlinks in .gitmodules,
2018-05-04) made it impossible to load a symlink .gitmodules file into
the index. However, there are no tests of this behavior. Let's make sure
this case is covered. We can easily reuse the test setup created by
the matching b7b1fca175 (fsck: complain when .gitmodules is a symlink,
2018-05-04).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script has already expanded beyond its original intent of ".. in
submodule names" to include other malicious submodule bits. Let's update
the name and description to reflect that, as well as the fact that we'll
soon be adding similar tests for other dotfiles (.gitattributes, etc).
We'll also renumber it to move it out of the group of submodule-specific
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b2f2039c2b (fsck: accept an oid instead of a "struct tree" for
fsck_tree(), 2019-10-18) introduced a new "oid" parameter to
fsck_tree(), and we pass it to the report() function when we find
problems. However, that is shadowed within the tree-walking loop by the
existing "oid" variable which we use to store the oid of each tree
entry. As a result, we may report the wrong oid for some problems we
detect within the loop (the entry oid, instead of the tree oid).
Our tests didn't catch this because they checked only that we found the
expected fsck problem, not that it was attached to the correct object.
Let's rename both variables in the function to avoid confusion. This
makes the diff a little noisy (e.g., all of the report() calls outside
the loop were already correct but need to be touched), but makes sure we
catch all cases and will avoid similar confusion in the future.
And we can update the test to be a bit more specific and catch this
problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since GETTEXT_POISON does not exist anymore, there is no point warning
people about whether we should use test_i18ngrep. This is doubly
confusing because the comment was describing why it was OK to use grep,
but it got caught up in the mass conversion of 674ba34038 (fsck: mark
strings for translation, 2018-11-10).
Note there are other uses of test_i18ngrep in this script which are now
obsolete; I'll save those for a mass-cleanup. My goal here was just to
fix the confusing comment in code I'm about to refactor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A negative delta depth makes no sense, and the code is not prepared to
handle it. If passed "--depth=-1" on the command line, then this line
from break_delta_chains():
cur->depth = (total_depth--) % (depth + 1);
triggers a divide-by-zero. This is undefined behavior according to the C
standard, but on POSIX systems results in SIGFPE killing the process.
This is certainly one way to inform the use that the command was
invalid, but it's a bit friendlier to just treat it as "don't allow any
deltas", which we already do for --depth=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We'd expect this to cleanly produce no deltas at all (as opposed to
getting confused by an out-of-bounds value), and it does.
Note we have to adjust our max_chain test helper, which expected to find
at least one delta.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A negative window size makes no sense, and the code in find_deltas() is
not prepared to handle it. If you pass "-1", for example, we end up
generate a 0-length array of "struct unpacked", but our loop assumes it
has at least one entry in it (and we end up reading garbage memory).
We could complain to the user about this, but it's more forgiving to
just clamp it to 0, which means "do not find any deltas at all". The
0-case is already tested earlier in the script, so we'll make sure this
does the same thing.
Reported-by: Yiyuan guo <yguoaz@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We pack a set of objects both with and without --window=0, assuming that
the 0-length window will cause us not to produce any deltas. Let's
confirm that this is the case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first set of tests in t5300 goes back to 2005, and doesn't use some
of our customary style and tools these days. In preparation for touching
them, let's modernize a few things:
- titles go on the line with test_expect_success, with a hanging
open-quote to start the test body
- test bodies should be indented with tabs
- opening braces for shell blocks in &&-chains go on their own line
- no space between redirect operators and files (">foo", not "> foo")
- avoid doing work outside of test blocks; in this case, we can stick
the setup of ".git2" into the appropriate blocks
- avoid modifying and then cleaning up the environment or current
directory by using subshells and "git -C"
- this test does a curious thing when testing the unpacking: it sets
GIT_OBJECT_DIRECTORY, and then does a "git init" in the _original_
directory, creating a weird mixed situation. Instead, it's much
simpler to just "git init --bare" a new repository to unpack into,
and check the results there. I renamed this "git2" instead of
".git2" to make it more clear it's a separate repo.
- we can observe that the bodies of the no-delta, ref_delta, and
ofs_delta cases are all virtually identical except for the pack
creation, and factor out shared helper functions. I collapsed "do
the unpack" and "check the results of the unpack" into a single
test, since that makes the expected lifetime of the "git2" temporary
directory more clear (that also lets us use test_when_finished to
clean it up). This does make the "-v" output slightly less useful,
but the improvement in reading the actual test code makes it worth
it.
- I dropped the "pwd" calls from some tests. These don't do anything
functional, and I suspect may have been an aid for debugging when
the script was more cavalier about leaving the working directory
changed between tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commands such as
$ git submodule update --quiet --init --depth=1
involving shallow clones, call the shell function fetch_in_submodule, which
in turn invokes git fetch. Pass the --quiet option onward there.
Signed-off-by: Nicholas Clark <nick@ccl4.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log" learned "--diff-merges=<style>" option, with an
associated configuration variable log.diffMerges.
* so/log-diff-merge:
doc/diff-options: document new --diff-merges features
diff-merges: introduce log.diffMerges config variable
diff-merges: adapt -m to enable default diff format
diff-merges: refactor set_diff_merges()
diff-merges: introduce --diff-merges=on
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
The prefetch task in "git maintenance" assumed that "git fetch"
from any remote would fetch all its local branches, which would
fetch too much if the user is interested in only a subset of
branches there.
* ds/maintenance-prefetch-fix:
maintenance: respect remote.*.skipFetchAll
maintenance: use 'git fetch --prefetch'
fetch: add --prefetch option
maintenance: simplify prefetch logic
|
|
"git push --quiet --set-upstream" was not quiet when setting the
upstream branch configuration, which has been corrected.
* ow/push-quiet-set-upstream:
transport: respect verbosity when setting upstream
|
|
Handling of "promisor packs" that allows certain objects to be
missing and lazily retrievable has been optimized (a bit).
* jk/promisor-optim:
revision: avoid parsing with --exclude-promisor-objects
lookup_unknown_object(): take a repository argument
is_promisor_object(): free tree buffer after parsing
|
|
Commit e4c7b33747 ("bisect--helper: reimplement `bisect_skip` shell
function in C", 2021-02-03), as part of the shell-to-C conversion,
forgot to read the 'terms' file (.git/BISECT_TERMS) during the new
'bisect skip' command implementation. As a result, the 'bisect skip'
command will use the default 'bad'/'good' terms. If the bisection
terms have been set to non-default values (for example by the
'bisect start' command), then the 'bisect skip' command will fail.
In order to correct this problem, we insert a call to the get_terms()
function, which reads the non-default terms from that file (if set),
in the '--bisect-skip' command implementation of 'bisect--helper'.
Also, add a test[1] to protect against potential future regression.
[1] https://lore.kernel.org/git/xmqqim45h585.fsf@gitster.g/T/#m207791568054b0f8cf1a3942878ea36293273c7d
Reported-by: Trygve Aaberge <trygveaa@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The backslash character is not a valid part of a file name on Windows.
If, in Windows, Git attempts to write a file that has a backslash
character in the filename, it will be incorrectly interpreted as a
directory separator.
This caused CVE-2019-1354 in MinGW, as this behaviour can be manipulated
to cause the checkout to write to files it ought not write to, such as
adding code to the .git/hooks directory. This was fixed by e1d911dd4c
(mingw: disallow backslash characters in tree objects' file names,
2019-09-12). However, the vulnerability also exists in Cygwin: while
Cygwin mostly provides a POSIX-like path system, it will still interpret
a backslash as a directory separator.
To avoid this vulnerability, CVE-2021-29468, extend the previous fix to
also apply to Cygwin.
Similarly, extend the test case added by the previous version of the
commit. The test suite doesn't have an easy way to say "run this test
if in MinGW or Cygwin", so add a new test prerequisite that covers both.
As well as checking behaviour in the presence of paths containing
backslashes, the existing test also checks behaviour in the presence of
paths that differ only by the presence of a trailing ".". MinGW follows
normal Windows application behaviour and treats them as the same path,
but Cygwin more closely emulates *nix systems (at the expense of
compatibility with native Windows applications) and will create and
distinguish between such paths. Gate the relevant bit of that test
accordingly.
Reported-by: RyotaK <security@ryotak.me>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While not documented as such, many of the top-level options like
`--git-dir` and `--work-tree` support two syntaxes: they accept both an
equals sign between option and its value, and they do support option and
value as two separate arguments. The recently added `--config-env`
option only supports the syntax with an equals sign.
Mitigate this inconsistency by accepting both syntaxes and add tests to
verify both work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We pass our prune expiration to mark_reachable_objects(), which will
traverse not only the reachable objects, but consider any recent ones as
tips for reachability; see d3038d22f9 (prune: keep objects reachable
from recent objects, 2014-10-15) for details.
However, this interacts badly with the bitmap code path added in
fde67d6896 (prune: use bitmaps for reachability traversal, 2019-02-13).
If we hit the bitmap-optimized path, we return immediately to avoid the
regular traversal, accidentally skipping the "also traverse recent"
code.
Instead, we should do an if-else for the bitmap versus regular
traversal, and then follow up with the "recent" traversal in either
case. This reuses the "rev_info" for a bitmap and then a regular
traversal, but that should work OK (the bitmap code clears the pending
array in the usual way, just like a regular traversal would).
Note that I dropped the comment above the regular traversal here. It
has little explanatory value, and makes the if-else logic much harder to
read.
Here are a few variants that I rejected:
- it seems like both the reachability and recent traversals could be
done in a single traversal. This was rejected by d3038d22f9 (prune:
keep objects reachable from recent objects, 2014-10-15), though the
balance may be different when using bitmaps. However, there's a
subtle correctness issue, too: we use revs->ignore_missing_links for
the recent traversal, but not the reachability one.
- we could try using bitmaps for the recent traversal, too, which
could possibly improve performance. But it would require some fixes
in the bitmap code, which uses ignore_missing_links for its own
purposes. Plus it would probably not help all that much in practice.
We use the reachable tips to generate bitmaps, so those objects are
likely not covered by bitmaps (unless they just became unreachable).
And in general, we expect the set of unreachable objects to be much
smaller anyway, so there's less to gain.
The test in t5304 detects the bug and confirms the fix.
I also beefed up the tests in t6501, which covers the mtime-checking
code more thoroughly, to handle the bitmap case (in addition to just
"loose" and "packed" cases). Interestingly, this test doesn't actually
detect the bug, because it is running "git gc", and not "prune"
directly. And "gc" will call "repack" first, which does not suffer the
same bug. So the old-but-reachable-from-recent objects get scooped up
into the new pack along with the actually-recent objects, which gives
both a recent mtime. But it seemed prudent to get more coverage of the
bitmap case for related code.
Reported-by: David Emett <dave@sp4m.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Øystein Walle
Joachim Kuebart
Phillip Wood
Jonathan Tan
ZheNing Hu
Jeff King
Nicholas Clark
Ramsay Jones
Adam Dinwoodie
Patrick Steinhardt