| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A bit more leftover clean-up to deprepcate "rebase -p".
* js/rebase-deprecate-preserve-merges:
rebase docs: recommend `-r` over `-p`
docs: say that `--rebase=preserve` is deprecated
tests: mark a couple more test cases as requiring `rebase -p`
|
|
Rename environment variables that are used to control the "trace2"
mechanism to a more readable name.
* sg/trace2-rename:
trace2: document the supported values of GIT_TRACE2* env variables
trace2: rename environment variables to GIT_TRACE2*
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* nd/diff-parseopt:
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
diff-parseopt: restore -U (no argument) behavior
diff-parseopt: correct variable types that are used by parseopt
|
|
Before d473e2e0e8 (diff.c: convert -U|--unified, 2019-01-27), -U and
--unified are implemented with a custom parser opt_arg() in diff.c. I
didn't check this code carefully and not realize that it's the
equivalent of PARSE_OPT_NONEG | PARSE_OPT_OPTARG.
In other words, if -U is specified without any argument, the option
should be accepted, and the default value should be used. Without
PARSE_OPT_OPTARG, parse_options() will reject this case and cause a
regression.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--preserve-merges` option has been deprecated, and as a consequence
we started to mark test cases that require that option to be supported,
in preparation for removing that support eventually.
Since we marked those test cases, a couple more crept into the test
suite, and with this patch, we mark them, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The codepath to parse :<path> that obtains the object name for an
indexed object has been made more robust.
* jk/get-oid-indexed-object-name:
get_oid: handle NULL repo->index
|
|
A prerequiste check in the test suite to see if a working jgit is
available was made more robust.
* tz/test-lib-check-working-jgit:
test-lib: try harder to ensure a working jgit
|
|
Developer support update.
* es/check-non-portable-pre-5.10:
check-non-portable-shell: support Perl versions older than 5.10
|
|
The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.
* js/fsmonitor-refresh-after-discarding-index:
fsmonitor: force a refresh after the index was discarded
fsmonitor: demonstrate that it is not refreshed after discard_index()
|
|
An additional test for MinGW
* js/t5580-unc-alternate-test:
t5580: verify that alternates can be UNC paths
|
|
Avoid patterns to pipe output from a git command to feed another
command in tests.
* bl/t4253-exit-code-from-format-patch:
t4253-am-keep-cr-dos: avoid using pipes
|
|
Update "git difftool" and "git mergetool" so that the combinations
of {diff,merge}.{tool,guitool} configuration variables serve as
fallback settings of each other in a sensible order.
* dl/difftool-mergetool:
difftool: fallback on merge.guitool
difftool: make --gui, --tool and --extcmd mutually exclusive
mergetool: fallback to tool when guitool unavailable
mergetool--lib: create gui_mode function
mergetool: use get_merge_tool function
t7610: add mergetool --gui tests
t7610: unsuppress output
|
|
Future-proof a test against an update to MSYS2 runtime v3.x series.
* js/t6500-use-windows-pid-on-mingw:
t6500(mingw): use the Windows PID of the shell
|
|
Allow tests that involve httpd to be run under leak sanitizer, just
like we can already do so under address sanitizer.
* jk/apache-lsan:
t/lib-httpd: pass LSAN_OPTIONS through apache
|
|
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
|
|
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.
* dl/branch-from-3dot-merge-base:
branch: make create_branch accept a merge base rev
t2018: cleanup in current test
|
|
Performance test framework has been broken and measured the version
of Git that happens to be on $PATH, not the specified one to
measure, for a while, which has been corrected.
* ab/perf-installed-fix:
perf-lib.sh: forbid the use of GIT_TEST_INSTALLED
perf tests: add "bindir" prefix to git tree test results
perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh
perf-lib.sh: make "./run <revisions>" use the correct gits
perf aggregate: remove GIT_TEST_INSTALLED from --codespeed
perf README: correct docs for 3c8f12c96c regression
|
|
Typofix.
* dl/warn-tagging-a-tag:
tag: fix typo in nested tagging hint
|
|
The JGIT prereq uses `type jgit` to determine whether jgit is present.
While this is usually sufficient, it won't help if the jgit found is
badly broken. This wastes time running tests which fail due to no fault
of our own.
Use `jgit --version` instead, to guard against cases where jgit is
present on the system, but will fail to run, e.g. because of some JRE
issue, or missing Java dependencies. Checking that it gets far enough
to process the '--version' argument isn't perfect, but seems to be good
enough in practice. It's also consistent with how we detect some other
dependencies, see e.g. the CURL and UNZIP prerequisites.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When get_oid() and its helpers see an index name like ":.gitmodules",
they try to load the index on demand, like:
if (repo->index->cache)
repo_read_index(repo);
However, that misses the case when "repo->index" itself is NULL; we'll
segfault in the conditional.
This never happens with the_repository; there we always point its index
field to &the_index. But a submodule repository may have a NULL index
field until somebody calls repo_read_index().
This bug is triggered by t7411, but it was hard to notice because it's
in an expect_failure block. That test was added by 2b1257e463 (t/helper:
add test-submodule-nested-repo-config, 2018-10-25). Back then we had no
easy way to access the .gitmodules blob of a submodule repo, so we
expected (and got) an error message to that effect. Later, d9b8b8f896
(submodule-config.c: use repo_get_oid for reading .gitmodules,
2019-04-16) started looking in the correct repo, which is when we
started triggering the segfault.
With this fix, the test starts passing (once we clean it up as its
comment instructs).
Note that as far as I know, this bug could not be triggered outside of
the test suite. It requires resolving an index name in a submodule, and
all of the code paths (aside from test-tool) which do that either load
the index themselves, or always pass the_repository.
Ultimately it comes from 3a7a698e93 (sha1-name.c: remove implicit
dependency on the_index, 2019-01-12), which replaced a check of
"the_index.cache" with "repo->index->cache". So even if there is another
way to trigger it, it wouldn't affect any versions before then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
|
|
The script to aggregate perf result unconditionally depended on
libjson-perl even though it did not have to, which has been
corrected.
* jk/perf-aggregate-wo-libjson:
t/perf: depend on perl JSON only when using --codespeed
|
|
Fix index-pack perf test so that the repeated invocations always
run in an empty repository, which emulates the initial clone
situation better.
* jk/p5302-avoid-collision-check-cost:
p5302: create the repo in each index-pack test
|
|
The connectivity bitmaps are created by default in bare
repositories now; also the pathname hash-cache is created by
default to avoid making crappy deltas when repacking.
* ew/repack-with-bitmaps-by-default:
pack-objects: default to writing bitmap hash-cache
t5310: correctly remove bitmaps for jgit test
repack: enable bitmaps by default on bare repos
|
|
During an initial "git clone --depth=..." partial clone, it is
pointless to spend cycles for a large portion of the connectivity
check that enumerates and skips promisor objects (which by
definition is all objects fetched from the other side). This has
been optimized out.
* js/partial-clone-connectivity-check:
t/perf: add perf script for partial clones
clone: do faster object check for partial clones
|
|
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
|
|
In git-difftool.txt, it says
'git difftool' falls back to 'git mergetool' config variables when the
difftool equivalents have not been defined.
However, when `diff.guitool` is missing, it doesn't fallback to
anything. Make git-difftool fallback to `merge.guitool` when `diff.guitool` is
missing.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-difftool, these options specify which tool to ultimately run. As
a result, they are logically conflicting. Explicitly disallow these
options from being used together.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-difftool, if the tool is called with --gui but `diff.guitool` is
not set, it falls back to `diff.tool`. Make git-mergetool also fallback
from `merge.guitool` to `merge.tool` if the former is undefined.
If git-difftool, when called with `--gui`, were to use
`get_configured_mergetool` in a future patch, it would also get the
fallback behavior in the following precedence:
1. diff.guitool
2. merge.guitool
3. diff.tool
4. merge.tool
The behavior for when difftool or mergetool are called without `--gui`
should be identical with or without this patch.
Note that the search loop could be written as
sections="merge"
keys="tool"
if diff_mode
then
sections="diff $sections"
fi
if gui_mode
then
keys="guitool $keys"
fi
merge_tool=$(
IFS=' '
for key in $keys
do
for section in $sections
do
selected=$(git config $section.$key)
if test -n "$selected"
then
echo "$selected"
return
fi
done
done)
which would make adding a mode in the future much easier. However,
adding a new mode will likely never happen as it is highly discouraged
so, as a result, it is written in its current form so that it is more
readable for future readers.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For thoroughness when checking for one-shot environment variable
assignments at shell function call sites, check-non-portable-shell
stitches together incomplete lines (those ending with backslash). This
allows it to correctly flag such undesirable usage even when the
variable assignment and function call are split across lines, for
example:
FOO=bar \
func
where 'func' is a shell function.
The stitching is accomplished like this:
while (<>) {
chomp;
# stitch together incomplete lines (those ending with "\")
while (s/\\$//) {
$_ .= readline;
chomp;
}
# detect unportable/undesirable shell constructs
...
}
Although this implementation is well supported in reasonably modern Perl
versions (5.10 and later), it fails with older versions (such as Perl
5.8 shipped with ancient Mac OS 10.5). In particular, in older Perl
versions, 'readline' is not connected to the file handle associated with
the "magic" while (<>) {...} construct, so 'readline' throws a
"readline() on unopened filehandle" error. Work around this problem by
dropping readline() and instead incorporating the stitching of
incomplete lines directly into the existing while (<>) {...} loop.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In eea9c1e78f (tag: advise on nested tags, 2019-04-04), tag was taught
to hint at the user if a nested tag is made. However, this message had a
typo and it said "The object referred to by your new is...", which was
missing a "tag" after "new". Fix this message by adding the "tag".
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic to tell if a Git repository has a working tree protects
"git branch -D" from removing the branch that is currently checked
out by mistake. The implementation of this logic was broken for
repositories with unusual name, which unfortunately is the norm for
submodules these days. This has been fixed.
* jt/submodule-repo-is-with-worktree:
worktree: update is_bare heuristics
|
|
A follow-up test for an earlier "git prune" improvements.
* jk/prune-optim:
t5304: add a test for pruning with bitmaps
|
|
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
|
|
%(push:track) token used in the --format option to "git
for-each-ref" and friends was not showing the right branch, which
has been fixed.
* dr/ref-filter-push-track-fix:
ref-filter: use correct branch for %(push:track)
|
|
"git clone" learned a new --server-option option when talking over
the protocol version 2.
* jt/clone-server-option:
clone: send server options when using protocol v2
transport: die if server options are unsupported
|
|
Code tightening against a "wrong" object appearing where an object
of a different type is expected, instead of blindly assuming that
the connection between objects are correctly made.
* tb/unexpected:
rev-list: detect broken root trees
rev-list: let traversal die when --missing is not in use
get_commit_tree(): return NULL for broken tree
list-objects.c: handle unexpected non-tree entries
list-objects.c: handle unexpected non-blob entries
t: introduce tests for unexpected object types
t: move 'hex2oct' into test-lib-functions.sh
|
|
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
|
|
When given a tag that points at a commit-ish, "git replace --graft"
failed to peel the tag before writing a replace ref, which did not
make sense because the old graft mechanism the feature wants to
mimick only allowed to replace one commit object with another.
This has been fixed.
* cc/replace-graft-peel-tags:
replace: peel tag when passing a tag first to --graft
replace: peel tag when passing a tag as parent to --graft
t6050: redirect expected error output to a file
t6050: use test_line_count instead of wc -l
|
|
The trace2 tracing facility learned to auto-generate a filename
when told to log to a directory.
* js/trace2-to-directory:
trace2: write to directory targets
|
|
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
|
|
"git cherry-pick" run with the "-x" or the "--signoff" option used
to (and more importantly, ought to) clean up the commit log message
with the --cleanup=space option by default, but this has been
broken since late 2017. This has been fixed.
* pw/sequencer-cleanup-with-signoff-x-fix:
sequencer: fix cleanup with --signoff and -x
|
|
Running "git add" on a repository created inside the current
repository is an explicit indication that the user wants to add it
as a submodule, but when the HEAD of the inner repository is on an
unborn branch, it cannot be added as a submodule. Worse, the files
in its working tree can be added as if they are a part of the outer
repository, which is not what the user wants. These problems are
being addressed.
* km/empty-repo-is-still-a-repo:
add: error appropriately on repository with no commits
dir: do not traverse repositories with no commits
submodule: refuse to add repository with no commits
|
|
"git tag" learned to give an advice suggesting it might be a
mistake when creating an annotated or signed tag that points at
another tag.
* dl/warn-tagging-a-tag:
tag: advise on nested tags
tag: fix formatting
|
|
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
|
|
In Git for Windows, we use the MSYS2 Bash which inherits a non-standard
PID model from Cygwin's POSIX emulation layer: every MSYS2 process has a
regular Windows PID, and in addition it has an MSYS2 PID (which
corresponds to a shadow process that emulates Unix-style signal
handling).
With the upgrade to the MSYS2 runtime v3.x, this shadow process cannot
be accessed via `OpenProcess()` any longer, and therefore t6500 thought
incorrectly that the process referenced in `gc.pid` (which is not
actually a real `gc` process in this context, but the current shell) no
longer exists.
Let's fix this by making sure that the Windows PID is written into
`gc.pid` in this test script so that `git.exe` is able to understand
that that process does indeed still exist.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just as we instruct Apache to pass through ASAN_OPTIONS (so that
server-side Git programs it spawns will respect our options while
running the tests), we should do the same with LSAN_OPTIONS. Otherwise
trying to collect a list of leaks like:
export LSAN_OPTIONS=exitcode=0:log_path=/tmp/lsan
make SANITIZE=leak test
won't work for http tests (the server-side programs won't log their
leaks to the right place, and they'll prematurely die, producing a
spurious test failure).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this change, the `index_state` struct becomes the new home for the
flag that says whether the fsmonitor hook has been run, i.e. it is now
per-index.
It also gets re-set when the index is discarded, fixing the bug
demonstrated by the "test_expect_failure" test added in the preceding
commit. In that case fsmonitor-enabled Git would miss updates under
certain circumstances, see that preceding commit for details.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This one is tricky.
When `core.fsmonitor` is set, a `refresh_index()` will not perform a
full scan of files that might be modified, but will query the fsmonitor
and refresh only the ones that have been actually touched.
Due to implementation details, the fsmonitor is queried in
`refresh_cache_ent()`, but of course it only has to be queried once, so
we set a flag when we did that. But when the index was discarded, we did
not re-set that flag.
So far, this is only covered by our test suite when running with
GIT_TEST_FSMONITOR=$PWD/t7519/fsmonitor-all, and only due to the way the
built-in stash interacts with the recursive merge machinery.
Let's introduce a straight-forward regression test for this.
We simply extend the "read & discard index" loop in `test-tool
read-cache` to optionally refresh the index, report on a given file's
status, and then modify that file. Due to the bug described above, only
the first refresh will actually query the fsmonitor; subsequent loop
iterations will not.
This problem was reported by Ævar Arnfjörð Bjarmason.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Nguyễn Thái Ngọc Duy
Johannes Schindelin
SZEDER Gábor
Todd Zullinger
Jeff King
Denton Liu
Eric Sunshine