Age | Commit message (Collapse) | Author | Files | Lines |
|
We introduced the `PREPARE_FOR_MAIN_BRANCH` prereq for the sole purpose
of allowing us to perform the non-trivial adjustments regarding the
`master` -> `main` rename before the automatable ones.
Now that the transition is almost complete, we can stop using it in most
instances. The only two exceptions are t5526 and t9902: at the time of
writing, there are other patches in flight that touch these test
scripts, therefore their transition to `main` is postponed to a later
date.
This patch is the result of this command:
sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
git checkout HEAD -- t/t5526\* t/t9902\*
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t9902, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t9903. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t99*.sh lib-cvs.sh &&
git checkout HEAD -- t9902\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for all tests (except the ones we specifically excluded for now).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commits, we adjusted the test suite to use the branch
name `main` for initial branches.
The `git p4`-related tests are a bit harder to adjust because `git p4`
uses the ref `refs/heads/p4/master` to track the remote branches, and
for now, we do not want to change that (this might be the subject of a
future patch series). We only need to adjust for the actual initial
branch name to be changed to `main`.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[5-7]*.sh lib-cvs.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[0-4]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t8*.sh annotate*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t7064, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t7[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[0-4]*.sh &&
git checkout HEAD -- t7064\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[4-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are in the process of renaming the default branch name to `main`,
which is two characters shorter than `master`. Therefore, some lines
need to be adjusted in t6416, t6422 and t6427 that want to align text
involving the default branch name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t6300, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t6[0-3]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[0-3]*.sh &&
git checkout HEAD -- t6300\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[6-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/retsam/niam/g' \
-- t55[4-9]*.sh t556x*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Note that t5541 uses the reversed `master` name: `retsam`. We replace it
by the equivalent for `main`: `niam`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
t55[23]*.sh &&
git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t551*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t550*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an upcoming commit, we will use `main` as the default branch name in
t5503 instead of `master`. This will require extra padding in ASCII-art
commit graphs, which we hereby add preemptively.
By doing this preemptively rather than after the commit applying the
search-and-replace, it is more obvious that we caught all aligned
comments that are affected by the latter commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t5310, which is developed independently of the
current patch series at the time of writing, we now use `main` as
default branch in t5[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[0-4]*.sh &&
git checkout HEAD -- t5310\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to search-and-replace all mentions of `master` in t5323 by
`main`, which is two characters shorter. To prepare for that, let's add
padding to centered lines that will make them briefly uncentered, but
will be re-centered in the commit that performs that rename.
Doing it this way (instead of padding after replacing) makes it easier
to verify the validity of the patch that replaces `master` by `main`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t4013 and t4015, which see independent development
elsewhere at the time of writing, we use `main` as the default branch
name in t4*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t4*.sh t4211/*.export &&
git checkout HEAD -- t4013\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t3[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t3404, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t34*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t34*.sh &&
git checkout HEAD -- t34\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to adjust t3416 for the new default branch name `main`.
This name is two characters shorter and therefore needs two spaces more
padding to align correctly.
Adjusting the alignment before the big search-and-replace makes it
easier to verify that the final result does not leave any misaligned
lines behind.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t3040, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t3[0-3]*.sh t3206/* &&
git checkout HEAD -- t3040\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t2106, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t2*.sh &&
git checkout HEAD -- t2106\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to adjust t0060 for the new default branch name `main`.
This name is two characters shorter and therefore needs two spaces more
padding to align correctly.
Adjusting the alignment before the big search-and-replace makes it
easier to verify that the final result does not leave any misaligned
lines behind.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
js/default-branch-name-tests-final-stretch
* jk/diff-release-filespec-fix:
t7800: simplify difftool test
diff: allow passing NULL to diff_free_filespec_data()
|
|
"git blame --ignore-revs-file=<file>" learned to ignore a
non-existent object name in the input, instead of complaining.
* jc/blame-ignore-fix:
blame: silently ignore invalid ignore file objects
|
|
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
|
|
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
"git rebase -i" did not store ORIG_HEAD correctly.
* pw/rebase-i-orig-head:
rebase -i: simplify get_revision_ranges()
rebase -i: use struct object_id when writing state
rebase -i: use struct object_id rather than looking up commit
rebase -i: stop overwriting ORIG_HEAD buffer
|
|
"git format-patch --output=there" did not work as expected and
instead crashed. The option is now supported.
* jk/format-patch-output:
format-patch: support --output option
format-patch: tie file-opening logic to output_directory
format-patch: refactor output selection
|
|
"git log -L<range>:<path>" is documented to take no pathspec, but
this was not enforced by the command line option parser, which has
been corrected.
* jc/line-log-takes-no-pathspec:
log: diagnose -L used with pathspec as an error
|
|
Add t/perf support for fsmonitor.
* nk/perf-fsmonitor:
t/perf/fsmonitor: add benchmark for dirty status
t/perf/fsmonitor: perf comparison of multiple fsmonitor integrations
t/perf/fsmonitor: initialize test with git reset
t/perf/fsmonitor: factor setup for fsmonitor into function
t/perf/fsmonitor: silence initial git commit
t/perf/fsmonitor: shorten DESC to basename
t/perf/fsmonitor: factor description out for readability
t/perf/fsmonitor: improve error message if typoing hook name
t/perf/fsmonitor: move watchman setup to one-time-repo-setup
t/perf/fsmonitor: separate one time repo initialization
|
|
Preparation for a new merge strategy.
* en/merge-tests:
t6423: add more details about direct resolution of directories
t6423: note improved ort handling with untracked files
t6423, t6436: note improved ort handling with dirty files
merge tests: expect slight differences in output for recursive vs. ort
t6423: expect improved conflict markers labels in the ort backend
t6404, t6423: expect improved rename/delete handling in ort backend
t6416: correct expectation for rename/rename(1to2) + directory/file
merge tests: expect improved directory/file conflict handling in ort
t/: new helper for tests that pass with ort but fail with recursive
|
|
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5515:
t5515: use `main` as the name of the main branch for testing (conclusion)
t5515: use `main` as the name of the main branch for testing (part 3)
t5515: use `main` as the name of the main branch for testing (part 2)
t5515: use `main` as the name of the main branch for testing (part 1)
|
|
"git fetch --depth=<n>" over the stateless RPC / smart HTTP
transport handled EOF from the client poorly at the server end.
* dd/upload-pack-stateless-eof:
upload-pack: allow stateless client EOF just prior to haves
|
|
Test clean-up.
* js/test-file-size:
tests: consolidate the `file_size` function into `test-lib-functions.sh`
|
|
Test code clean-up.
* js/test-whitespace-fixes:
t9603: use tabs for indentation
t5570: remove trailing padding
t5400,t5402: consistently indent with tabs, not with spaces
t3427: adjust stale comment
t3406: indent with tabs, not spaces
t1004: insert missing "branch" in a message
|
|
Typofix.
* rs/worktree-list-show-locked:
t2402: fix typo
|
|
The new test added by the previous commit can be simplified a lot.
Let's do so.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 610e2b9240 (blame: validate and peel the object names on the
ignore list, 2020-09-24) git blame reports checks if objects specified
with --ignore-rev and in files loaded with --ignore-revs-file and config
option blame.ignoreRevsFile are actual objects and dies if they aren't.
The intent is to report typos to the user.
This also breaks the ability to use a single ignore file for multiple
repositories. Typos are presumably less likely in files than on the
command line, so alerting is less useful here. Restore that feature by
skipping non-commits without dying.
Reported-by: Jean-Yves Avenard <jyavenard@mozilla.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5411:
t5411: finish preparing for `main` being the default branch name
t5411: adjust the remaining support files for init.defaultBranch=main
t5411: start adjusting the support files for init.defaultBranch=main
t5411: start using the default branch name "main"
|
|
Zsh autocompletion (in contrib/) update.
* fc/zsh-completion: (29 commits)
zsh: update copyright notices
completion: bash: remove old compat wrappers
completion: bash: cleanup cygwin check
completion: bash: trivial cleanup
completion: zsh: add simple version check
completion: zsh: trivial simplification
completion: zsh: add alias descriptions
completion: zsh: improve command tags
completion: zsh: refactor command completion
completion: zsh: shuffle functions around
completion: zsh: simplify file_direct
completion: zsh: simplify nl_append
completion: zsh: trivial cleanup
completion: zsh: simplify direct compadd
completion: zsh: simplify compadd functions
completion: zsh: fix splitting of words
completion: zsh: add missing direct_append
completion: fix conflict with bashcomp
completion: zsh: fix completion for --no-.. options
completion: bash: remove zsh wrapper
...
|
|
The code to detect premature EOF in the sideband demultiplexer has
been cleaned up.
* jk/sideband-more-error-checking:
sideband: diagnose more sideband anomalies
|
|
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
|
|
A commit and tag object may have CR at the end of each and
every line (you can create such an object with hash-object or
using --cleanup=verbatim to decline the default clean-up
action), but it would make it impossible to have a blank line
to separate the title from the body of the message. Be lenient
and accept a line with lone CR on it as a blank line, too.
* pb/ref-filter-with-crlf:
log, show: add tests for messages containing CRLF
ref-filter: handle CRLF at end-of-line more gracefully
|