| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The format.useAutoBase configuration option exists to allow users to
enable '--base=auto' for format-patch by default.
This can sometimes lead to poor workflow, due to unexpected failures
when attempting to format an ancient patch:
$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list
This can be very confusing, as it is not necessarily immediately obvious
that the user requested a --base (since this was in the configuration,
not on the command line).
We do want --base=auto to fail when it cannot provide a suitable base,
as it would be equally confusing if a formatted patch did not include
the base information when it was requested.
Teach format.useAutoBase a new mode, "whenAble". This mode will cause
format-patch to attempt to include a base commit when it can. However,
if no valid base commit can be found, then format-patch will continue
formatting the patch without a base commit.
In order to avoid making yet another branch name unusable with --base,
do not teach --base=whenAble or --base=whenable.
Instead, refactor the base_commit option to use a callback, and rely on
the global configuration variable auto_base.
This does mean that a user cannot request this optional base commit
generation from the command line. However, this is likely not too
valuable. If the user requests base information manually, they will be
immediately informed of the failure to acquire a suitable base commit.
This allows the user to make an informed choice about whether to
continue the format.
Add tests to cover the new mode of operation for --base.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" that wants to be atomic and wants to send push
certificate learned not to prepare and sign the push certificate
when it fails the local check (hence due to atomicity it is known
that no certificate is needed).
* hx/push-atomic-with-cert:
send-pack: run GPG after atomic push checking
|
|
The "unshelve" subcommand of "git p4" used incorrectly used
commit^N where it meant to say commit~N to name the Nth generation
ancestor, which has been corrected.
* ld/p4-unshelve-fix:
git-p4: use HEAD~$n to find parent commit for unshelve
git-p4 unshelve: adding a commit breaks git-p4 unshelve
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
There is a logic to estimate how many objects are in the
repository, which is mean to run once per process invocation, but
it ran every time the estimated value was requested.
* jk/dont-count-existing-objects-twice:
packfile: actually set approximate_object_count_valid
|
|
"git for-each-ref" and friends that list refs used to allow only
one --merged or --no-merged to filter them; they learned to take
combination of both kind of filtering.
* al/ref-filter-merged-and-no-merged:
Doc: prefer more specific file name
ref-filter: make internal reachable-filter API more precise
ref-filter: allow merged and no-merged filters
Doc: cover multiple contains/no-contains filters
t3201: test multiple branch filter combinations
|
|
Portability tweak for some shell scripts used while building.
* kk/build-portability-fix:
Fit to Plan 9's ANSI/POSIX compatibility layer
|
|
"add -p" now allows editing paths that were only added in intent.
* pw/add-p-edit-ita-path:
add -p: fix editing of intent-to-add paths
|
|
The refs update commands can be sent to the server side in two different
ways: GPG-signed or unsigned. We should run these two operations in the
same "Finally, tell the other end!" code block, but they are seperated
by the "Clear the status for each ref" code block. This will result in
a slight performance loss, because the failed atomic push will still
perform unnecessary preparations for shallow advertise and GPG-signed
commands buffers, and user may have to be bothered by the (possible) GPG
passphrase input when there is nothing to sign.
Add a new test case to t5534 to ensure GPG will not be called when the
GPG-signed atomic push fails.
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Found-by: Liu Xuhui (Jackson) <Xuhui.Liu@amd.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-p4 unshelve uses HEAD^$n to find the parent commit, which
fails if there is an additional commit.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike "git config --local", "git config --worktree" did not fail
early and cleanly when started outside a git repository.
* mt/config-fail-nongit-early:
config: complain about --worktree outside of a git repo
|
|
"git status --short" quoted a path with SP in it when tracked, but
not those that are untracked, ignored or unmerged. They are all
shown quoted consistently.
* jc/quote-path-cleanup:
quote: turn 'nodq' parameter into a set of flags
quote: rename misnamed sq_lookup[] to cq_lookup[]
wt-status: consistently quote paths in "status --short" output
quote_path: code clarification
quote_path: optionally allow quoting a path with SP in it
quote_path: give flags parameter to quote_path()
quote_path: rename quote_path_relative() to quote_path()
|
|
"add -i/-p" fixes.
* jk/add-i-fixes:
add--interactive.perl: specify --no-color explicitly
add-patch: fix inverted return code of repo_read_index()
|
|
Test fix.
* al/t3200-back-on-a-branch:
t3200: clean side effect of git checkout --orphan
|
|
The approximate_object_count() function tries to compute the count only
once per process. But ever since it was introduced in 8e3f52d778
(find_unique_abbrev: move logic out of get_short_sha1(), 2016-10-03), we
failed to actually set the "valid" flag, meaning we'd compute it fresh
on every call.
This turns out not to be _too_ bad, because we're only iterating through
the packed_git list, and not making any system calls. But since it may
get called for every abbreviated hash we output, even this can add up if
you have many packs.
Here are before-and-after timings for a new perf test which just asks
rev-list to abbreviate each commit hash (the test repo is linux.git,
with commit-graphs):
Test origin HEAD
----------------------------------------------------------------------------
5303.3: rev-list (1) 28.91(28.46+0.44) 29.03(28.65+0.38) +0.4%
5303.4: abbrev-commit (1) 1.18(1.06+0.11) 1.17(1.02+0.14) -0.8%
5303.7: rev-list (50) 28.95(28.56+0.38) 29.50(29.17+0.32) +1.9%
5303.8: abbrev-commit (50) 3.67(3.56+0.10) 3.57(3.42+0.15) -2.7%
5303.11: rev-list (1000) 30.34(29.89+0.43) 30.82(30.35+0.46) +1.6%
5303.12: abbrev-commit (1000) 86.82(86.52+0.29) 77.82(77.59+0.22) -10.4%
5303.15: load 10,000 packs 0.08(0.02+0.05) 0.08(0.02+0.06) +0.0%
It doesn't help at all when we have 1 pack (5303.4), but we get a 10%
speedup when there are 1000 packs (5303.12). That's a modest speedup for
a case that's already slow and we'd hope to avoid in general (note how
slow it is even after, because we have to look in each of those packs
for abbreviations). But it's a one-line change that clearly matches the
original intent, so it seems worth doing.
The included perf test may also be useful for keeping an eye on any
regressions in the overall abbreviation code.
Reported-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git maintenance run' command has an '--auto' option. This is used
by other Git commands such as 'git commit' or 'git fetch' to check if
maintenance should be run after adding data to the repository.
Previously, this --auto option was only used to add the argument to the
'git gc' command as part of the 'gc' task. We will be expanding the
other tasks to perform a check to see if they should do work as part of
the --auto flag, when they are enabled by config.
First, update the 'gc' task to perform the auto check inside the
maintenance process. This prevents running an extra 'git gc --auto'
command when not needed. It also shows a model for other tasks.
Second, use the 'auto_condition' function pointer as a signal for
whether we enable the maintenance task under '--auto'. For instance, we
do not want to enable the 'fetch' task in '--auto' mode, so that
function pointer will remain NULL.
Now that we are not automatically calling 'git gc', a test in
t5514-fetch-multiple.sh must be changed to watch for 'git maintenance'
instead.
We continue to pass the '--auto' option to the 'git gc' command when
necessary, because of the gc.autoDetach config option changes behavior.
Likely, we will want to absorb the daemonizing behavior implied by
gc.autoDetach as a maintenance.autoDetach config option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, a normal run of "git maintenance run" will only run the 'gc'
task, as it is the only one enabled. This is mostly for backwards-
compatible reasons since "git maintenance run --auto" commands replaced
previous "git gc --auto" commands after some Git processes. Users could
manually run specific maintenance tasks by calling "git maintenance run
--task=<task>" directly.
Allow users to customize which steps are run automatically using config.
The 'maintenance.<task>.enabled' option then can turn on these other
tasks (or turn off the 'gc' task).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A user may want to only run certain maintenance tasks in a certain
order. Add the --task=<task> option, which allows a user to specify an
ordered list of tasks to run. These cannot be run multiple times,
however.
Here is where our array of maintenance_task pointers becomes critical.
We can sort the array of pointers based on the task order, but we do not
want to move the struct data itself in order to preserve the hashmap
references. We use the hashmap to match the --task=<task> arguments into
the task struct data.
Keep in mind that the 'enabled' member of the maintenance_task struct is
a placeholder for a future 'maintenance.<task>.enabled' config option.
Thus, we use the 'enabled' member to specify which tasks are run when
the user does not specify any --task=<task> arguments. The 'enabled'
member should be ignored if --task=<task> appears.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first new task in the 'git maintenance' builtin is the
'commit-graph' task. This updates the commit-graph file
incrementally with the command
git commit-graph write --reachable --split
By writing an incremental commit-graph file using the "--split"
option we minimize the disruption from this operation. The default
behavior is to merge layers until the new "top" layer is less than
half the size of the layer below. This provides quick writes most
of the time, with the longer writes following a power law
distribution.
Most importantly, concurrent Git processes only look at the
commit-graph-chain file for a very short amount of time, so they
will verly likely not be holding a handle to the file when we try
to replace it. (This only matters on Windows.)
If a concurrent process reads the old commit-graph-chain file, but
our job expires some of the .graph files before they can be read,
then those processes will see a warning message (but not fail).
This could be avoided by a future update to use the --expire-time
argument when writing the commit-graph.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maintenance activities are commonly used as steps in larger scripts.
Providing a '--quiet' option allows those scripts to be less noisy when
run on a terminal window. Turn this mode on by default when stderr is
not a terminal.
Pipe the option to the 'git gc' child process.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'gc' builtin is our current entrypoint for automatically maintaining
a repository. This one tool does many operations, such as repacking the
repository, packing refs, and rewriting the commit-graph file. The name
implies it performs "garbage collection" which means several different
things, and some users may not want to use this operation that rewrites
the entire object database.
Create a new 'maintenance' builtin that will become a more general-
purpose command. To start, it will only support the 'run' subcommand,
but will later expand to add subcommands for scheduling maintenance in
the background.
For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin.
In fact, the only option is the '--auto' toggle, which is handed
directly to the 'gc' builtin. The current change is isolated to this
simple operation to prevent more interesting logic from being lost in
all of the boilerplate of adding a new builtin.
Use existing builtin/gc.c file because we want to share code between the
two builtins. It is possible that we will have 'maintenance' replace the
'gc' builtin entirely at some point, leaving 'git gc' as an alias for
some specific arguments to 'git maintenance run'.
Create a new test_subcommand helper that allows us to test if a certain
subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a
file. A negation mode is available that will be used in later tests.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable ref-filter to process multiple merged and no-merged filters, and
extend functionality to git branch, git tag and git for-each-ref. This
provides an easy way to check for branches that are "graduation
candidates:"
$ git branch --no-merged master --merged next
If passed more than one merged (or more than one no-merged) filter, refs
must be reachable from any one of the merged commits, and reachable from
none of the no-merged commits.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests covering the behavior of passing multiple contains/no-contains
filters to git branch, e.g.:
$ git branch --contains feature_a --contains feature_b
$ git branch --no-contains feature_a --no-contains feature_b
When passed more than one contains (or no-contains) filter, the tips of
the branches returned must be reachable from any of the contains commits
and from none of the the no-contains commits.
This logic is useful to describe prior to enabling multiple
merged/no-merged filters, so that future tests will demonstrate
consistent behavior between merged/no-merged and contains/no-contains
filters.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tracked paths with SP in them were cquoted in "git status --short"
output, but untracked, ignored, and unmerged paths weren't.
The test was stolen from a patch to fix output for the 'untracked'
paths by brian m. carlson, with similar tests added for 'ignored'
ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
tr(1) of ANSI/POSIX environment, aka APE, don't support \n literal.
It's handles only octal(\ooo) or hexadecimal(\xhhhh) numbers.
And its sed(1)'s label is limited to maximum seven characters.
Therefore I replaced some labels to drop a character.
* close -> cl
* continue -> cont (cnt is used for count)
* line -> ln
* hered -> hdoc
* shell -> sh
* string -> str
Signed-off-by: Kyohei Kadota <lufia@lufia.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
The "--format=" option to the "for-each-ref" command and friends
learned a few more tricks, e.g. the ":short" suffix that applies to
"objectname" now also can be used for "parent", "tree", etc.
* hv/ref-filter-misc:
ref-filter: add `sanitize` option for 'subject' atom
pretty: refactor `format_sanitized_subject()`
ref-filter: add `short` modifier to 'parent' atom
ref-filter: add `short` modifier to 'tree' atom
ref-filter: rename `objectname` related functions and fields
ref-filter: modify error messages in `grab_objectname()`
ref-filter: refactor `grab_objectname()`
ref-filter: support different email formats
|
|
Fixups to a topic in 'next'.
* ss/submodule-summary-in-c-fixes:
t7421: eliminate 'grep' check in t7421.4 for mingw compatibility
submodule: fix style in function definition
submodule: eliminate unused parameters from print_submodule_summary()
|
|
"git worktree" gained a "repair" subcommand to help users recover
after moving the worktrees or repository manually without telling
Git. Also, "git init --separate-git-dir" no longer corrupts
administrative data related to linked worktrees.
* es/worktree-repair:
init: make --separate-git-dir work from within linked worktree
init: teach --separate-git-dir to repair linked worktrees
worktree: teach "repair" to fix outgoing links to worktrees
worktree: teach "repair" to fix worktree back-links to main worktree
worktree: add skeleton "repair" command
|
|
When a packfile is removed by "git repack", multi-pack-index gets
cleared; the code was taught to do so less aggressively by first
checking if the midx actually refers to a pack that no longer
exists.
* tb/repack-clearing-midx:
midx: traverse the local MIDX first
builtin/repack.c: invalidate MIDX only when necessary
|
|
Yet another subcommand of "git submodule" is getting rewritten in C.
* ss/submodule-summary-in-c:
submodule: port submodule subcommand 'summary' from shell to C
t7421: introduce a test script for verifying 'summary' output
submodule: rename helper functions to avoid ambiguity
submodule: remove extra line feeds between callback struct and macro
|
|
A popular way of partially staging a new file is to run `git add -N
<path>` and then use the hunk editing of `git add -p` to select the
part of the file that the user wishes to stage. Since
85953a3187 ("diff-files --raw: show correct post-image of
intent-to-add files", 2020-07-01) this has stopped working as
intent-to-add paths are now show as new files rather than changes to
an empty blob and `git apply` refused to apply a creation patch for a
path that was marked as intent-to-add. 7cfde3fa0f ("apply: allow "new
file" patches on i-t-a entries", 2020-08-06) fixed the problem with
apply but it still wasn't possible to edit the added hunk properly.
2c8bd8471a ("checkout -p: handle new files correctly", 2020-05-27)
had previously changed `add -p` to handle new files but it did not
implement patch editing correctly. The perl version simply forbade
editing and the C version opened the editor with the full diff rather
that just the hunk which meant that the user had to edit the hunk
header manually to get it to work.
The root cause of the problem is that added files store the diff header
with the hunk data rather than separating the two as we do for other
changes. Changing added files to store the diff header separately
fixes the editing problem at the expense of having to special case
empty additions as they no longer have any hunks associated with them,
only the diff header.
The changes move some existing code into a conditional changing the
indentation, they are best viewed with
--color-moved-ws=allow-indentation-change (or --ignore-space-change
works well to get an overview of the changes)
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reported-by: Thomas Sullivan <tom@msbit.com.au>
Reported-by: Yuchen Ying <ych@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running `git config --worktree` outside of a git repository hits a BUG()
when trying to enumerate the worktrees. Let's catch this error earlier
and die() with a friendlier message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "refuse --edit-description on unborn branch for now" test in t3200
switches to an orphan branch, causing subsequent git commands
referencing HEAD to fail. Avoid this side-effect by switching back to
master after the test finishes.
This has gone undetected, as the next affected test expects failure -
but it currently fails for the wrong reason.
Verbose output of the next test referencing HEAD,
"--merged is incompatible with --no-merged":
fatal: malformed object name HEAD
Which this commit corrects to:
error: option `no-merged' is incompatible with --merged
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our color tests of "git add -p" do something a bit different from how a
normal user would behave: we pretend there's a pager in use, so that Git
thinks it's OK to write color to a non-tty stdout. This comes from
8539b46534 (t3701: avoid depending on the TTY prerequisite, 2019-12-06),
which allows us to avoid a lot of complicated mock-tty code.
However, those environment variables also make their way down to
sub-processes of add--interactive, including the "diff-files" we run to
generate the patches. As a result, it thinks it should output color,
too. So in t3701.50, for example, the machine-readable version of the
diff we get unexpectedly has color in it. We fail to parse it as a diff
and think there are zero hunks.
The test does still pass, though, because even with zero hunks we'll
dump the diff header (and we consider those unparseable bits to be part
of the header!), and so the output still has the expected color codes in
it. We don't notice that the command was totally broken and failed to
apply anything.
And in fact we're not really testing what we think we are about the
color, either. While add--interactive does correctly show the version we
got from running "diff-files --color", we'd also pass the test if we had
accidentally shown the machine-readable version, too, since it
(erroneously) has color codes in it.
One could argue that the test isn't very realistic; it's setting up this
"pretend there's a pager" situation to get around the tty restrictions
of the test environment. So one option would be to move back towards
using a real tty. But the behavior of add--interactive really is
user-visible here. If a user, for whatever reason, did run "git
--paginate add --patch" (perhaps because their pager is really a filter
or something), the command would totally fail to do anything useful.
Since we know that we don't want color in this output, let's just make
add--interactive more defensive, and say "--no-color" explicitly. It
doesn't hurt anything in the common case, but it fixes this odd case and
lets our test function properly again.
Note that the C builtin run_add_p() already passes --no-color, so it
doesn't need a similar fix. That will eventually replace this perl code
anyway, but the test change here will be valuable for ensuring that.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After applying hunks to a file with "add -p", the C patch_update_file()
function tries to refresh the index (just like the perl version does).
We can only refresh the index if we're able to read it in, so we first
check the return value of repo_read_index(). But unlike many functions,
where "0" is success, that function is documented to return the number
of entries in the index. Hence we should be checking for success with a
non-negative return value.
Neither the tests nor any users seem to have noticed this, probably due
to a combination of:
- this affects only the C version, which is not yet the default
- following it up with any porcelain command like "git diff" or "git
commit" would refresh the index automatically.
But you can see the problem by running the plumbing "git diff-files"
immediately after "add -p" stages all hunks. Running the new test with
GIT_TEST_ADD_I_USE_BUILTIN=1 fails without the matching code change.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --stat -w" showed 0-line changes for paths whose changes
were only whitespaces, which was not intuitive. We now omit such
paths from the stat output.
* mr/diff-hide-stat-wo-textual-change:
diff: teach --stat to ignore uninteresting modifications
|
|
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
|
|
Trim an unused binary and turn a bunch of commands into built-in.
* jk/slimmed-down:
drop vcs-svn experiment
make git-fast-import a builtin
make git-bugreport a builtin
make credential helpers builtins
Makefile: drop builtins from MSVC pdb list
|
|
Bugfix for "git fetch" when the packfile URI capability is in use.
* jt/fetch-pack-loosen-validation-with-packfile-uri:
fetch-pack: make packfile URIs work with transfer.fsckobjects
fetch-pack: document only_packfile in get_pack()
(various): document from_promisor parameter
|
|
Test clean-up.
* ss/t7401-modernize:
t7401: add a NEEDSWORK
t7401: change indentation for enhanced readability
t7401: change syntax of test_i18ncmp calls for clarity
t7401: use 'short' instead of 'verify' and cut in rev-parse calls
t7401: modernize style
|
|
"git rebase -i" learns a bit more options.
* pw/rebase-i-more-options:
t3436: do not run git-merge-recursive in dashed form
rebase: add --reset-author-date
rebase -i: support --ignore-date
rebase -i: support --committer-date-is-author-date
am: stop exporting GIT_COMMITTER_DATE
rebase -i: add --ignore-whitespace flag
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
887952b8c6 ("fetch: optionally allow disabling FETCH_HEAD update",
2020-08-18) introduced the ability to disable writing to FETCH_HEAD
during fetch, but did not suppress the "<source> -> FETCH_HEAD" message
when this ability is used. This message is misleading in this case,
because FETCH_HEAD is not written. Also, because "fetch" is used to
lazy-fetch missing objects in a partial clone, this significantly
clutters up the output in that case since the objects to be fetched are
potentially numerous.
Therefore, suppress this message when --no-write-fetch-head is passed
(but not when --dry-run is set).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification by removing ineffective optimization.
* ps/ref-transaction-hook:
refs: remove lookup cache for reference-transaction hook
|
|
Feeding "$ZERO_OID" to "git log --ignore-missing --stdin", and
running "git log --ignore-missing $ZERO_OID" fell back to start
digging from HEAD; it has been corrected to become a no-op, like
"git log --tags=no-tag-matches-this-pattern" does.
* jk/rev-input-given-fix:
revision: set rev_input_given in handle_revision_arg()
|
|
Error message update.
* jc/ident-whose-ident:
ident: say whose identity is missing when giving user.name hint
|
Jacob Keller
Junio C Hamano
Han Xin
Luke Diamand
Jeff King
Derrick Stolee
Aaron Lipman
Kyohei Kadota
Phillip Wood
Matheus Tavares
Jonathan Tan