| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We need to be careful to follow proper quoting rules. For example, if an
argument contains spaces, we have to quote them. Double-quotes need to
be escaped. Backslashes need to be escaped, but only if they are
followed by a double-quote character.
We need to be _extra_ careful to consider the case where an argument
ends in a backslash _and_ needs to be quoted: in this case, we append a
double-quote character, i.e. the backslash now has to be escaped!
The current code, however, fails to recognize that, and therefore can
turn an argument that ends in a single backslash into a quoted argument
that now ends in an escaped double-quote character. This allows
subsequent command-line parameters to be split and part of them being
mistaken for command-line options, e.g. through a maliciously-crafted
submodule URL during a recursive clone.
Technically, we would not need to quote _all_ arguments which end in a
backslash _unless_ the argument needs to be quoted anyway. For example,
`test\` would not need to be quoted, while `test \` would need to be.
To keep the code simple, however, and therefore easier to reason about
and ensure its correctness, we now _always_ quote an argument that ends
in a backslash.
This addresses CVE-2019-1350.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Currently it is technically possible to let a submodule's git
directory point right into the git dir of a sibling submodule.
Example: the git directories of two submodules with the names `hippo`
and `hippo/hooks` would be `.git/modules/hippo/` and
`.git/modules/hippo/hooks/`, respectively, but the latter is already
intended to house the former's hooks.
In most cases, this is just confusing, but there is also a (quite
contrived) attack vector where Git can be fooled into mistaking remote
content for file contents it wrote itself during a recursive clone.
Let's plug this bug.
To do so, we introduce the new function `validate_submodule_git_dir()`
which simply verifies that no git dir exists for any leading directories
of the submodule name (if there are any).
Note: this patch specifically continues to allow sibling modules names
of the form `core/lib`, `core/doc`, etc, as long as `core` is not a
submodule name.
This fixes CVE-2019-1387.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
We just safe-guarded `.git` against NTFS Alternate Data Stream-related
attack vectors, and now it is time to do the same for `.gitmodules`.
Note: In the added regression test, we refrain from verifying all kinds
of variations between short names and NTFS Alternate Data Streams: as
the new code disallows _all_ Alternate Data Streams of `.gitmodules`, it
is enough to test one in order to know that all of them are guarded
against.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Probably inspired by HFS' resource streams, NTFS supports "Alternate
Data Streams": by appending `:<stream-name>` to the file name,
information in addition to the file contents can be written and read,
information that is copied together with the file (unless copied to a
non-NTFS location).
These Alternate Data Streams are typically used for things like marking
an executable as having just been downloaded from the internet (and
hence not necessarily being trustworthy).
In addition to a stream name, a stream type can be appended, like so:
`:<stream-name>:<stream-type>`. Unless specified, the default stream
type is `$DATA` for files and `$INDEX_ALLOCATION` for directories. In
other words, `.git::$INDEX_ALLOCATION` is a valid way to reference the
`.git` directory!
In our work in Git v2.2.1 to protect Git on NTFS drives under
`core.protectNTFS`, we focused exclusively on NTFS short names, unaware
of the fact that NTFS Alternate Data Streams offer a similar attack
vector.
Let's fix this.
Seeing as it is better to be safe than sorry, we simply disallow paths
referring to *any* NTFS Alternate Data Stream of `.git`, not just
`::$INDEX_ALLOCATION`. This also simplifies the implementation.
This closes CVE-2019-1352.
Further reading about NTFS Alternate Data Streams:
https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-fscc/c54dec26-1551-4d3a-a0ea-4fa40f848eb3
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
In preparation to flipping the default on `core.protectNTFS`, let's have
some way to measure the speed impact of this config setting reliably
(and for comparison, the `core.protectHFS` config setting).
For now, this is a manual performance benchmark:
./t/helper/test-path-utils protect_ntfs_hfs [arguments...]
where the arguments are an optional number of file names to test with,
optionally followed by minimum and maximum length of the random file
names. The default values are one million, 3 and 20, respectively.
Just like `sqrti()` in `bisect.c`, we introduce a very simple function
to approximation the square root of a given value, in order to avoid
having to introduce the first user of `<math.h>` in Git's source code.
Note: this is _not_ implemented as a Unix shell script in t/perf/
because we really care about _very_ precise timings here, and Unix shell
scripts are simply unsuited for precise and consistent benchmarking.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
The backslash character is not a valid part of a file name on Windows.
Hence it is dangerous to allow writing files that were unpacked from
tree objects, when the stored file name contains a backslash character:
it will be misinterpreted as directory separator.
This not only causes ambiguity when a tree contains a blob `a\b` and a
tree `a` that contains a blob `b`, but it also can be used as part of an
attack vector to side-step the careful protections against writing into
the `.git/` directory during a clone of a maliciously-crafted
repository.
Let's prevent that, addressing CVE-2019-1354.
Note: we guard against backslash characters in tree objects' file names
_only_ on Windows (because on other platforms, even on those where NTFS
volumes can be mounted, the backslash character is _not_ a directory
separator), and _only_ when `core.protectNTFS = true` (because users
might need to generate tree objects for other platforms, of course
without touching the worktree, e.g. using `git update-index
--cacheinfo`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
In addition to preventing `.git` from being tracked by Git, on Windows
we also have to prevent `git~1` from being tracked, as the default NTFS
short name (also known as the "8.3 filename") for the file name `.git`
is `git~1`, otherwise it would be possible for malicious repositories to
write directly into the `.git/` directory, e.g. a `post-checkout` hook
that would then be executed _during_ a recursive clone.
When we implemented appropriate protections in 2b4c6efc821 (read-cache:
optionally disallow NTFS .git variants, 2014-12-16), we had analyzed
carefully that the `.git` directory or file would be guaranteed to be
the first directory entry to be written. Otherwise it would be possible
e.g. for a file named `..git` to be assigned the short name `git~1` and
subsequently, the short name generated for `.git` would be `git~2`. Or
`git~3`. Or even `~9999999` (for a detailed explanation of the lengths
we have to go to protect `.gitmodules`, see the commit message of
e7cb0b4455c (is_ntfs_dotgit: match other .git files, 2018-05-11)).
However, by exploiting two issues (that will be addressed in a related
patch series close by), it is currently possible to clone a submodule
into a non-empty directory:
- On Windows, file names cannot end in a space or a period (for
historical reasons: the period separating the base name from the file
extension was not actually written to disk, and the base name/file
extension was space-padded to the full 8/3 characters, respectively).
Helpfully, when creating a directory under the name, say, `sub.`, that
trailing period is trimmed automatically and the actual name on disk
is `sub`.
This means that while Git thinks that the submodule names `sub` and
`sub.` are different, they both access `.git/modules/sub/`.
- While the backslash character is a valid file name character on Linux,
it is not so on Windows. As Git tries to be cross-platform, it
therefore allows backslash characters in the file names stored in tree
objects.
Which means that it is totally possible that a submodule `c` sits next
to a file `c\..git`, and on Windows, during recursive clone a file
called `..git` will be written into `c/`, of course _before_ the
submodule is cloned.
Note that the actual exploit is not quite as simple as having a
submodule `c` next to a file `c\..git`, as we have to make sure that the
directory `.git/modules/b` already exists when the submodule is checked
out, otherwise a different code path is taken in `module_clone()` that
does _not_ allow a non-empty submodule directory to exist already.
Even if we will address both issues nearby (the next commit will
disallow backslash characters in tree entries' file names on Windows,
and another patch will disallow creating directories/files with trailing
spaces or periods), it is a wise idea to defend in depth against this
sort of attack vector: when submodules are cloned recursively, we now
_require_ the directory to be empty, addressing CVE-2019-1349.
Note: the code path we patch is shared with the code path of `git
submodule update --init`, which must not expect, in general, that the
directory is empty. Hence we have to introduce the new option
`--force-init` and hand it all the way down from `git submodule` to the
actual `git submodule--helper` process that performs the initial clone.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
As with export-marks in the previous commit, import-marks can access the
filesystem. This is significantly less dangerous than export-marks
because it only involves reading from arbitrary paths, rather than
writing them. However, it could still be surprising and have security
implications (e.g., exfiltrating data from a service that accepts
fast-import streams).
Let's lump it (and its "if-exists" counterpart) in with export-marks,
and enable the in-stream version only if --allow-unsafe-features is set.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
This fixes CVE-2019-1348.
Signed-off-by: Jeff King <peff@peff.net>
|
|
When we parse the --export-marks option, we don't immediately open the
file, but we do create any leading directories. This can be especially
confusing when a command-line option overrides an in-stream one, in
which case we'd create the leading directory for the in-stream file,
even though we never actually write the file.
Let's instead create the directories just before opening the file, which
means we'll create only useful directories. Note that this could change
the handling of relative paths if we chdir() in between, but we don't
actually do so; the only permanent chdir is from setup_git_directory()
which runs before either code path (potentially we should take the
pre-setup dir into account to avoid surprising the user, but that's an
orthogonal change).
The test just adapts the existing "override" test to use paths with
leading directories. This checks both that the correct directory is
created (which worked before but was not tested), and that the
overridden one is not (our new fix here).
While we're here, let's also check the error result of
safe_create_leading_directories(). We'd presumably notice any failure
immediately after when we try to open the file itself, but we can give a
more specific error message in this case.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Our tests confirm that providing two "import-marks" options in a
fast-import stream is an error. However, the invoked command would fail
even without covering this case, because the marks files themselves do
not actually exist. Let's create the files to make sure we fail for the
right reason (we actually do, because the option parsing happens before
we open anything, but this future-proofs our test).
Signed-off-by: Jeff King <peff@peff.net>
|
|
These waste a process, and make the line longer than it needs to be.
Signed-off-by: Jeff King <peff@peff.net>
|
|
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
|
|
This tests primarily for NTFS issues, but also adds one example of an
HFS+ issue.
Thanks go to Congyi Wu for coming up with the list of examples where
NTFS would possibly equate the filename with `.gitmodules`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Submodule "names" come from the untrusted .gitmodules file,
but we blindly append them to $GIT_DIR/modules to create our
on-disk repo paths. This means you can do bad things by
putting "../" into the name (among other things).
Let's sanity-check these names to avoid building a path that
can be exploited. There are two main decisions:
1. What should the allowed syntax be?
It's tempting to reuse verify_path(), since submodule
names typically come from in-repo paths. But there are
two reasons not to:
a. It's technically more strict than what we need, as
we really care only about breaking out of the
$GIT_DIR/modules/ hierarchy. E.g., having a
submodule named "foo/.git" isn't actually
dangerous, and it's possible that somebody has
manually given such a funny name.
b. Since we'll eventually use this checking logic in
fsck to prevent downstream repositories, it should
be consistent across platforms. Because
verify_path() relies on is_dir_sep(), it wouldn't
block "foo\..\bar" on a non-Windows machine.
2. Where should we enforce it? These days most of the
.gitmodules reads go through submodule-config.c, so
I've put it there in the reading step. That should
cover all of the C code.
We also construct the name for "git submodule add"
inside the git-submodule.sh script. This is probably
not a big deal for security since the name is coming
from the user anyway, but it would be polite to remind
them if the name they pick is invalid (and we need to
expose the name-checker to the shell anyway for our
test scripts).
This patch issues a warning when reading .gitmodules
and just ignores the related config entry completely.
This will generally end up producing a sensible error,
as it works the same as a .gitmodules file which is
missing a submodule entry (so "submodule update" will
barf, but "git clone --recurse-submodules" will print
an error but not abort the clone.
There is one minor oddity, which is that we print the
warning once per malformed config key (since that's how
the config subsystem gives us the entries). So in the
new test, for example, the user would see three
warnings. That's OK, since the intent is that this case
should never come up outside of malicious repositories
(and then it might even benefit the user to see the
message multiple times).
Credit for finding this vulnerability and the proof of
concept from which the test script was adapted goes to
Etienne Stalmans.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
The checkpoint command "git fast-import" did not flush updates to
refs and marks unless at least one object was created since the
last checkpoint, which has been corrected, as these things can
happen without any new object getting created.
* er/fast-import-dump-refs-on-checkpoint:
fast-import: checkpoint: dump branches/tags/marks even if object_count==0
|
|
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
|
|
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use. This has been fixed.
* nd/worktree-kill-parse-ref:
branch: fix branch renaming not updating HEADs correctly
|
|
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
Improve behaviour of "git fsck" upon finding a missing object.
* rs/fsck-null-return-from-lookup:
fsck: handle NULL return of lookup_blob() and lookup_tree()
|
|
* rs/qsort-s:
test-stringlist: avoid buffer underrun when sorting nothing
|
|
Doc updates.
* mr/doc-negative-pathspec:
docs: improve discoverability of exclude pathspec
|
|
Doc updates.
* ks/test-readme-phrasofix:
t/README: fix typo and grammatically improve a sentence
|
|
Code clean-up.
* jk/drop-sha1-entry-pos:
sha1-lookup: remove sha1_entry_pos() from header file
sha1_file: drop experimental GIT_USE_LOOKUP search
|
|
In the "--format=..." option of the "git for-each-ref" command (and
its friends, i.e. the listing mode of "git branch/tag"), "%(atom:)"
(e.g. "%(refname:)", "%(body:)" used to error out. Instead, treat
them as if the colon and an empty string that follows it were not
there.
* tb/ref-filter-empty-modifier:
ref-filter.c: pass empty-string as NULL to atom parsers
|
|
Spell the name of our system as "Git" in the output from
request-pull script.
* ar/request-pull-phrasofix:
request-pull: capitalise "Git" to make it a proper noun
|
|
"git cat-file --textconv" started segfaulting recently, which
has been corrected.
* jk/diff-blob:
cat-file: handle NULL object_context.path
|
|
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
|
|
The test linter has been taught that we do not like "echo -e".
* tb/test-lint-echo-e:
test-lint: echo -e (or -E) is not portable
|
|
"git archive", especially when used with pathspec, stored an empty
directory in its output, even though Git itself never does so.
This has been fixed.
* rs/archive-excluded-directory:
archive: don't add empty directories to archives
|
|
Fix regression to "gitk --bisect" by a recent update.
* mh/packed-ref-store-prep:
rev-parse: don't trim bisect refnames
|
|
In addition to "cc: <a@dd.re.ss> # cruft", "cc: a@dd.re.ss # cruft"
was taught to "git send-email" as a valid way to tell it that it
needs to also send a carbon copy to <a@dd.re.ss> in the trailer
section.
* mm/send-email-cc-cruft:
send-email: don't use Mail::Address, even if available
send-email: fix garbage removal after address
|
|
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of
136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 136c8c8b8fa39f1315713248473dececf20f8fe7.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit c5bdfe677cfab5b2e87771c35565d44d3198efda.
That commit was done primarily to prepare for the weakening
of "always" in 6be4595edb (color: make "always" the same as
"auto" in config, 2017-10-03). But since we've now reverted
6be4595edb, there's no need for us to remove "-c
color.ui=always" from the tests. And in fact it's a good
idea to restore these tests, to make sure that "always"
continues to work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 6be4595edb8e5b616c6e8b9fbc78b0f831fa2a87.
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52642bd45fd5513ab0000fdf2e58a6f4. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like
e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in
0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
jk/ref-filter-colors-fix-maint
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
lookup_blob() and lookup_tree() can return NULL if they find an object
of an unexpected type. Accessing the object member is undefined in that
case. Cast the result to a struct object pointer instead; we can do
that because object is the first member of all object types. This trick
is already used in other places in the code.
An error message is already shown by object_as_type(), which is called
by the lookup functions. The walk callback functions are expected to
handle NULL object pointers passed to them, but put_object_name() needs
a valid object, so avoid calling it without one.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Peff points out that different atom parsers handle the empty
"sub-argument" list differently. An example of this is the format
"%(refname:)".
Since callers often use `string_list_split` (which splits the empty
string with any delimiter as a 1-ary string_list containing the empty
string), this makes handling empty sub-argument strings non-ergonomic.
Let's fix this by declaring that atom parser implementations must
not care about distinguishing between the empty string "%(refname:)"
and no sub-arguments "%(refname)". Current code aborts, either with
"unrecognised arg" (e.g. "refname:") or "does not take args"
(e.g. "body:") as an error message.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check if the strbuf containing data to sort is empty before attempting
to trim a trailing newline character.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To test the color output, we must convince "git branch" to
write colors to a non-terminal. We do that now by setting
the color config to "always". In preparation for the
behavior of "always" changing, let's switch to using the
"--color" command-line option, which is more direct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for the behavior of "always" changing to
match "auto", we can simply drop this test. We already check
other forms (like "--color") independently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We test the %C() format placeholders with a variety of
color-inducing options, including "--color" and
"-c color.ui=always". In preparation for the behavior of
"always" changing, we need to do something with those
"always" tests.
We can drop ones that expect "always" to turn on color even
to a file, as that will become a synonym for "auto", which
is already tested.
For the "--no-color" test, we need to make sure that color
would otherwise be shown. To do this, we can use
test_terminal, which enables colors in the default setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To check that "status -v" respects diff config, we set
"color.diff" and look at the output of "status". We could
equally well use any diff config. Since color output depends
on a lot of other factors (like whether stdout is a tty, and
how we interpret "always"), let's use a more mundane option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script tests the output of status with various formats
when color is enabled. It uses the "always" setting so that
the output is valid even though we capture it in a file.
Using test_terminal gives us a more realistic environment,
and prepares us for the behavior of "always" changing.
Arguably we are testing less than before, since "auto" is
already the default, and we can no longer tell if the config
is actually doing anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Garima Singh
Jeff King
Junio C Hamano
René Scharfe
Taylor Blau