| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jk/for-each-ref-skip-parsing:
for-each-ref: avoid loading objects to print %(objectname)
|
|
Moving a regular file in a repository with a .gitmodules file was
producing a warning 'Could not find section in .gitmodules where
path=<filename>'.
* jl/submodule-mv:
mv: Fix spurious warning when moving a file in presence of submodules
|
|
* tr/valgrind-test-fix:
Revert "test-lib: allow prefixing a custom string before "ok N" etc."
Revert "test-lib: support running tests under valgrind in parallel"
|
|
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
|
|
* nd/gc-lock-against-each-other:
gc: remove gc.pid file at end of execution
|
|
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
|
|
* sg/t3600-nul-sha1-fix:
t3600: fix broken "choking git rm" test
|
|
One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
|
|
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
|
|
If you ask for-each-ref to print each ref and its object,
like:
git for-each-ref --format='%(objectname) %(refname)'
this should involve little more work than looking at the ref
files (and packed-refs) themselves. However, for-each-ref
will actually load each object from disk just to print its
sha1. For most repositories, this isn't a big deal, but it
can be noticeable if you have a large number of refs to
print. Here are best-of-five timings for the command above
on a repo with ~10K refs:
[before]
real 0m0.112s
user 0m0.092s
sys 0m0.016s
[after]
real 0m0.014s
user 0m0.012s
sys 0m0.000s
This patch checks for %(objectname) and %(objectname:short)
before we actually parse the object (and the rest of the
code is smart enough to avoid parsing if we have filled all
of our placeholders).
Note that we can't simply move the objectname parsing code
into the early loop. If the "deref" form %(*objectname) is
used, then we do need to parse the object in order to peel
the tag. So instead of moving the code, we factor it out
into a separate function that can be called for both cases.
While we're at it, we add some basic tests for the
dereferenced placeholders, which were not tested at all
before. This helps ensure we didn't regress that case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Make the fall-back parsing of commit objects with broken author or
committer lines more robust to pick up the timestamps.
* jk/split-broken-ident:
split_ident: parse timestamp from end of line
|
|
"git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the
output, but "git rev-list --objects v1.0^..v1.0" did not.
* jc/revision-range-unpeel:
revision: do not peel tags used in range notation
|
|
* jx/relative-path-regression-fix:
Use simpler relative_path when set_git_dir
relative_path should honor dos-drive-prefix
test: use unambigous leading path (/foo) for MSYS
|
|
"git clone" gave some progress messages to the standard output, not to
the standard error, and did not allow suppressing them with the
"--no-progress" option.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
|
|
"format-patch --from=<whom>" forgot to omit unnecessary in-body from
line, i.e. when <whom> is the same as the real author.
* jk/format-patch-from:
format-patch: print in-body "From" only when needed
|
|
"git shortlog" used to choke and die when there is a malformed commit
(e.g. missing authors); it now simply ignore such a commit and keeps
going.
* jk/shortlog-tolerate-broken-commit:
shortlog: ignore commits with missing authors
|
|
Point test writers to the test_expect_* functions properly.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
|
|
"git branch --track" had a minor regression in v1.8.3.2 and later
that made it impossible to base your local work on anything but a
local branch of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
|
|
When there is no sufficient overlap between old and new history
during a "git fetch" into a shallow repository, objects that the
sending side knows the receiving end has were unnecessarily sent.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
|
|
"git cherry-pick" without further options would segfault.
Could use a follow-up to handle '-' after argv[1] better.
* hu/cherry-pick-previous-branch:
cherry-pick: handle "-" after parsing options
|
|
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
|
|
Now that ad0e623 (test-lib: support running tests under valgrind in
parallel, 2013-06-23) has been reverted, this support code has no
users any more. Revert it, too.
This reverts commit e939e15d241e942662b9f88f6127ab470ab0a0b9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit ad0e6233320b004f0d686f6887c803e508607bd2.
--valgrind-parallel was broken from the start: during review I made
the whole valgrind setup code conditional on not being a
--valgrind-parallel worker child. But even the children crucially
need $GIT_VALGRIND to be set; it should therefore have been set
outside the conditional.
The fix would be a two-liner, but since the introduction of the
feature, almost four months have passed without anyone noticing that
it is broken. So this feature is not worth the about hundred lines of
test-lib.sh complexity. Revert it.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git clone now reports its progress to standard error, which throws off
t5570. Using test_i18ngrep instead of test_cmp allows the test to be
more flexible by only looking for the expected error and ignoring any
other output from the program.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
|
|
git-daemon now uses the symref capability to send the correct HEAD
reference, so the test for that in t5570 now passes.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parse_pathspec() is called with no paths, the behavior could be
either return no paths, or return one path that is cwd. Some commands
do the former, some the latter. parse_pathspec() itself does not make
either the default and requires the caller to specify either flag if
it may run into this situation.
I've grep'd through all parse_pathspec() call sites. Some pass
neither, but those are guaranteed never pass empty path to
parse_pathspec(). There are two call sites that may pass empty path
and are fixed with this patch.
[jc: added a test from Antoine's bug report]
Reported-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some progress and diagnostic messages from "git clone" were
incorrectly sent to the standard output stream, not to the standard
error stream.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
|
|
The previous code was detecting the presence of "--" by looking only at
argument 1. As a result, "git checkout foo bar --" was interpreted as an
ambiguous file/revision list, and errored out with:
error: pathspec 'foo' did not match any file(s) known to git.
error: pathspec 'bar' did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
This patch fixes it by walking through the argument list to find the
"--", and now complains about the number of references given.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--" notation disambiguates files and branches, but as a side-effect
of the previous implementation, also disabled the branch auto-creation
when $branch does not exist.
A possible scenario is then:
git checkout $branch
=> fails if $branch is both a ref and a file, and suggests --
git checkout $branch --
=> refuses to create the $branch
This patch allows the second form to create $branch, and since the -- is
provided, it does not look for file named $branch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This file isn't really harmful, but isn't useful either, and can create
minor annoyance for the user:
* It's confusing, as the presence of a *.pid file often implies that a
process is currently running. A user running "ls .git/" and finding
this file may incorrectly guess that a "git gc" is currently running.
* Leaving this file means that a "git gc" in an already gc-ed repo is
no-longer a no-op. A user running "git gc" in a set of repositories,
and then synchronizing this set (e.g. rsync -av, unison, ...) will see
all the gc.pid files as changed, which creates useless noise.
This patch unlinks the file after the garbage collection is done, so that
gc.pid is actually present only during execution.
Future versions of Git may want to use the information left in the gc.pid
file (e.g. for policies like "don't attempt to run a gc if one has
already been ran less than X hours ago"). If so, this patch can safely be
reverted. For now, let's not bother the users.
Explained-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"format-patch --from=<whom>" forgot to omit unnecessary in-body
from line, i.e. when <whom> is the same as the real author.
* jk/format-patch-from:
format-patch: print in-body "From" only when needed
|
|
Code refactoring.
* jk/trailing-slash-in-pathspec:
reset: handle submodule with trailing slash
rm: re-use parse_pathspec's trailing-slash removal
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/git-dir-pointing-at-gitfile:
Make setup_git_env() resolve .git file when $GIT_DIR is not specified
|
|
* ap/commit-author-mailmap:
commit: search author pattern against mailmap
|
|
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
Conflicts:
t/t3404-rebase-interactive.sh
|
|
* rt/rebase-p-no-merge-summary:
rebase --preserve-merges: ignore "merge.log" config
|
|
- Don't start tests with 'test $? = 0' to catch preparation done
outside the test_expect_success block.
- Move writing the bogus patch and the expected output into the
appropriate test_expect_success blocks.
- Use the test_must_fail helper instead of manually checking for
non-zero exit code.
- Use the debug-friendly test_path_is_file helper instead of 'test -f'.
- No space after '>'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test 'choking "git rm" should not let it die with cruft' is
supposed to check 'git rm's behavior when interrupted by provoking a
SIGPIPE while 'git rm' is busily deleting files from a specially
crafted index.
This test is silently broken for the following reasons:
- The test crafts a special index by feeding a large number of index
entries with null shas to 'git update-index --index-info'. It was
OK back then when this test was introduced in commit 0693f9ddad
(Make sure lockfiles are unlocked when dying on SIGPIPE,
2008-12-18), but since commit 4337b5856f (do not write null sha1s to
on-disk index, 2012-07-28) null shas are not allowed in the on-disk
index causing 'git update-index' to error out.
- The barfing 'git update-index --index-info' should fail the test,
but it remains unnoticed because of the severely broken && chain:
the test's result depends solely on whether there is a stale lock
file left behind, but after 'git update-index' errors out 'git rm'
won't be executed at all.
To fix this test feed only non-null shas to 'git update-index' and
restore the && chain (partly by adding a missing && and by using the
test_when_finished helper instead of manual cleanup).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.bogomips.org/git-svn:
git-svn: Warn about changing default for --prefix in Git v2.0
Documentation/git-svn: Promote the use of --prefix in docs + examples
git-svn.txt: elaborate on rev_map files
git-svn.txt: replace .git with $GIT_DIR
git-svn.txt: reword description of gc command
git-svn.txt: fix AsciiDoc formatting error
git-svn: fix signed commit parsing
|
|
A range notation "A..B" means exactly the same thing as what "^A B"
means, i.e. the set of commits that are reachable from B but not
from A. But the internal representation after the revision parser
parsed these two notations are subtly different.
- "rev-list ^A B" leaves A and B in the revs->pending.objects[]
array, with the former marked as UNINTERESTING and the revision
traversal machinery propagates the mark to underlying commit
objects A^0 and B^0.
- "rev-list A..B" peels tags and leaves A^0 (marked as
UNINTERESTING) and B^0 in revs->pending.objects[] array before
the traversal machinery kicks in.
This difference usually does not matter, but starts to matter when
the --objects option is used. For example, we see this:
$ git rev-list --objects v1.8.4^1..v1.8.4 | grep $(git rev-parse v1.8.4)
$ git rev-list --objects v1.8.4 ^v1.8.4^1 | grep $(git rev-parse v1.8.4)
04f013dc38d7512eadb915eba22efc414f18b869 v1.8.4
With the former invocation, the revision traversal machinery never
hears about the tag v1.8.4 (it only sees the result of peeling it,
i.e. the commit v1.8.4^0), and the tag itself does not appear in the
output. The latter does send the tag object itself to the output.
Make the range notation keep the unpeeled objects and feed them to
the traversal machinery to fix this inconsistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-prune-packed.txt: fix reference to GIT_OBJECT_DIRECTORY
clone --branch: refuse to clone if upstream repo is empty
|
|
Split_ident currently parses left to right. Given this
input:
Your Name <email@example.com> 123456789 -0500\n
We assume the name starts the line and runs until the first
"<". That starts the email address, which runs until the
first ">". Everything after that is assumed to be the
timestamp.
This works fine in the normal case, but is easily broken by
corrupted ident lines that contain an extra ">". Some
examples seen in the wild are:
1. Name <email>-<> 123456789 -0500\n
2. Name <email> <Name<email>> 123456789 -0500\n
3. Name1 <email1>, Name2 <email2> 123456789 -0500\n
Currently each of these produces some email address (which
is not necessarily the one the user intended) and end up
with a NULL date (which is generally interpreted as the
epoch by "git log" and friends).
But in each case we could get the correct timestamp simply
by parsing from the right-hand side, looking backwards for
the final ">", and then reading the timestamp from there.
In general, it's a losing battle to try to automatically
guess what the user meant with their broken crud. But this
particular workaround is probably worth doing. One, it's
dirt simple, and can't impact non-broken cases. Two, it
doesn't catch a single breakage we've seen, but rather a
large class of errors (i.e., any breakage inside the email
angle brackets may affect the email, but won't spill over
into the timestamp parsing). And three, the timestamp is
arguably more valuable to get right, because it can affect
correctness (e.g., in --until cutoffs).
This patch implements the right-to-left scheme described
above. We adjust the tests in t4212, which generate a commit
with such a broken ident, and now gets the timestamp right.
We also add a test that fsck continues to detect the
breakage.
For reference, here are pointers to the breakages seen (as
numbered above):
[1] http://article.gmane.org/gmane.comp.version-control.git/221441
[2] http://article.gmane.org/gmane.comp.version-control.git/222362
[3] http://perl5.git.perl.org/perl.git/commit/13b79730adea97e660de84bbe67f9d7cbe344302
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For efficiency and security reasons, an earlier commit in
this series taught http_get_* to re-write the base url based
on redirections we saw while making a specific request.
This commit wires that option into the info/refs request,
meaning that a redirect from
http://example.com/foo.git/info/refs
to
https://example.com/bar.git/info/refs
will behave as if "https://example.com/bar.git" had been
provided to git in the first place.
The tests bear some explanation. We introduce two new
hierearchies into the httpd test config:
1. Requests to /smart-redir-limited will work only for the
initial info/refs request, but not any subsequent
requests. As a result, we can confirm whether the
client is re-rooting its requests after the initial
contact, since otherwise it will fail (it will ask for
"repo.git/git-upload-pack", which is not redirected).
2. Requests to smart-redir-auth will redirect, and require
auth after the redirection. Since we are using the
redirected base for further requests, we also update
the credential struct, in order not to mislead the user
(or credential helpers) about which credential is
needed. We can therefore check the GIT_ASKPASS prompts
to make sure we are prompting for the new location.
Because we have neither multiple servers nor https
support in our test setup, we can only redirect between
paths, meaning we need to turn on
credential.useHttpPath to see the difference.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
* rj/highlight-test-hang:
gitweb test: fix highlight test hang on Linux Mint
|
|
Linux Mint has an implementation of the highlight command (unrelated
to the one from http://www.andre-simon.de) that works as a simple
filter. The script uses 'sed' to add terminal colour escape codes
around text matching a regular expression. When t9500-*.sh attempts
to run "highlight --version", the script simply hangs waiting for
input. (See https://bugs.launchpad.net/linuxmint/+bug/815005).
The tool required by gitweb can be installed from the 'highlight'
package. Unfortunately, given the default $PATH, this leads to the
tool having lower precedence than the script.
In order to avoid hanging the test, add '</dev/null' to the command
line of the highlight invocation. Also, since the 'highlight' tool
requred by gitweb produces '--version' output (and the script does
not), saving the command output allows a simple check for the wrong
'highlight'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Since 920b691 (clone: refuse to clone if --branch
points to bogus ref) we refuse to clone with option
"-b" if the specified branch does not exist in the
(non-empty) upstream. If the upstream repository is empty,
the branch doesn't exist, either. So refuse the clone too.
Reported-by: Robert Mitwicki <robert.mitwicki@opensoftware.pl>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
Junio C Hamano
Jeff King
Torstein Hegge
Thomas Rast
Brian Gernhardt
Nguyễn Thái Ngọc Duy
Matthieu Moy
Jonathan Nieder
SZEDER Gábor
Ramsay Jones
Ralf Thielow