| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
t2027-worktree-list has an incorrect expectation for --git-common-dir
which has been adjusted and marked to expect failure.
Some of the tests added have been marked to expect failure. These
demonstrate a problem with the way that some options to git rev-parse
behave when executed from a subdirectory of the main worktree.
[jes: fixed incorrect assumption that objects/ lives in the
worktree-specific git-dir (it lives in the common dir instead). Also
adjusted t1700 so that the test case does not *need* to be the last
one in that script.]
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
|
|
"make -C t failed" will now run only the tests that failed in the
previous run. This is usable only when prove is not use, and gives
a useless error message when run after "make clean", but otherwise
is serviceable.
* js/re-running-failed-tests:
t/Makefile: add a rule to re-run previously-failed tests
|
|
The user can specify a custom update method that is run when
"submodule update" updates an already checked out submodule. This
was ignored when checking the submodule out for the first time and
we instead always just checked out the commit that is bound to the
path in the superproject's index.
* sb/submodule-update-initial-runs-custom-script:
submodule update: run custom update script for initial populating as well
|
|
When a submodule "A", which has another submodule "B" nested within
it, is "absorbed" into the top-level superproject, the inner
submodule "B" used to be left in a strange state. The logic to
adjust the .git pointers in these submodules has been corrected.
* sb/submodule-recursive-absorb:
submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
cache.h: expose the dying procedure for reading gitlinks
setup: add gentle version of resolve_git_dir
|
|
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
* sb/unpack-trees-super-prefix:
unpack-trees: support super-prefix option
t1001: modernize style
t1000: modernize style
read-tree: use OPT_BOOL instead of OPT_SET_INT
|
|
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
|
|
Test tweaks for those who have default ACL in their git source tree
that interfere with the umask test.
* mm/reset-facl-before-umask-test:
t0001: don't let a default ACL interfere with the umask test
|
|
Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run
our tests but /usr/local/bin/unzip is usable.
* js/unzip-in-usr-bin-workaround:
test-lib: on FreeBSD, look for unzip(1) in /usr/local/bin/
|
|
After starting "git rebase -i", which first opens the user's editor
to edit the series of patches to apply, but before saving the
contents of that file, "git status" failed to show the current
state (i.e. you are in an interactive rebase session, but you have
applied no steps yet) correctly.
* js/status-pre-rebase-i:
status: be prepared for not-yet-started interactive rebase
|
|
"git submodule add" used to be confused and refused to add a
locally created repository; users can now use "--force" option
to add them.
* sb/submodule-add-force:
submodule add: extend force flag to add existing repos
|
|
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck --connectivity-check" was not working at all.
* jk/fsck-connectivity-check-fix:
fsck: lazily load types under --connectivity-only
fsck: move typename() printing to its own function
t1450: use "mv -f" within loose object directory
fsck: check HAS_OBJ more consistently
fsck: do not fallback "git fsck <bogus>" to "git fsck"
fsck: tighten error-checks of "git fsck <head>"
fsck: prepare dummy objects for --connectivity-check
fsck: report trees as dangling
t1450: clean up sub-objects in duplicate-entry test
|
|
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
|
|
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
|
|
"git show-ref HEAD" used with "--verify" because the user is not
interested in seeing refs/remotes/origin/HEAD, and used with
"--head" because the user does not want HEAD to be filtered out,
i.e. "git show-ref --head --verify HEAD", did not work as expected.
* vp/show-ref-verify-head:
show-ref: remove a stale comment
show-ref: remove dead `if (verify)' check
show-ref: detect dangling refs under --verify as well
show-ref: move --quiet handling into show_one()
show-ref: allow -d to work with --verify
show-ref: accept HEAD with --verify
|
|
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
|
|
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
|
|
The sequencer machinery has been further enhanced so that a later
set of patches can start using it to reimplement "rebase -i".
* js/sequencer-i-countdown-3: (38 commits)
sequencer (rebase -i): write out the final message
sequencer (rebase -i): write the progress into files
sequencer (rebase -i): show the progress
sequencer (rebase -i): suggest --edit-todo upon unknown command
sequencer (rebase -i): show only failed cherry-picks' output
sequencer (rebase -i): show only failed `git commit`'s output
sequencer: use run_command() directly
sequencer: update reading author-script
sequencer (rebase -i): differentiate between comments and 'noop'
sequencer (rebase -i): implement the 'drop' command
sequencer (rebase -i): allow rescheduling commands
sequencer (rebase -i): respect strategy/strategy_opts settings
sequencer (rebase -i): respect the rebase.autostash setting
sequencer (rebase -i): run the post-rewrite hook, if needed
sequencer (rebase -i): record interrupted commits in rewritten, too
sequencer (rebase -i): copy commit notes at end
sequencer (rebase -i): set the reflog message consistently
sequencer (rebase -i): refactor setting the reflog message
sequencer (rebase -i): allow fast-forwarding for edit/reword
sequencer (rebase -i): implement the 'reword' command
...
|
|
"git fsck" inspects loose objects more carefully now.
* jk/loose-object-fsck:
fsck: detect trailing garbage in all object types
fsck: parse loose object paths directly
sha1_file: add read_loose_object() function
t1450: test fsck of packed objects
sha1_file: fix error message for alternate objects
t1450: refactor loose-object removal
|
|
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
|
|
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd42bd0724aebed6e3b07c4ea2a2d5e8. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch automates the process of determining which tests failed
previously and re-running them.
While developing patch series, it is a good practice to run the test
suite from time to time, just to make sure that obvious bugs are caught
early. With complex patch series, it is common to run `make -j15 -k
test`, i.e. run the tests in parallel and *not* stop at the first
failing test but continue. This has the advantage of identifying
possibly multiple problems in one big test run.
It is particularly important to reduce the turn-around time thusly on
Windows, where the test suite spends 45 minutes on the computer on which
this patch was developed.
It is the most convenient way to determine which tests failed after
running the entire test suite, in parallel, to look for left-over "trash
directory.t*" subdirectories in the t/ subdirectory. However, those
directories might live outside t/ when overridden using the
--root=<directory> option, to which the Makefile has no access. The next
best method is to grep explicitly for failed tests in the test-results/
directory, which the Makefile *can* access.
Please note that the often-recommended `prove` tool requires Perl, and
that opens a whole new can of worms on Windows. As no native Windows Perl
comes with Subversion bindings, we have to use a Perl in Git for Windows
that uses the POSIX emulation layer named MSYS2 (which is a portable
version of Cygwin). When using this emulation layer under stress, e.g.
when running massively-parallel tests, unexplicable crashes occur quite
frequently, and instead of having a solution to the original problem, the
developer now has an additional, quite huge problem. For that reason, this
developer rejected `prove` as a solution and went with this patch instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1b4735d9f3 (submodule: no [--merge|--rebase] when newly cloned,
2011-02-17), all actions were defaulted to checkout for populating
a submodule initially, because merging or rebasing makes no sense
in that situation.
Other commands however do make sense, such as the custom command
that was added later (6cb5728c43, submodule update: allow custom
command to update submodule working tree, 2013-07-03).
I am unsure about the "none" command, as I can see an initial
checkout there as a useful thing. On the other hand going strictly
by our own documentation, we should do nothing in case of "none"
as well, because the user asked for it.
Reported-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider having a submodule 'sub' and a nested submodule at 'sub/nested'.
When nested is already absorbed into sub, but sub is not absorbed into
its superproject, then we need to fixup the gitfile and core.worktree
setting for 'nested' when absorbing 'sub', but we do not need to move
its git dir around.
Previously 'nested's gitfile contained "gitdir: ../.git/modules/nested";
it has to be corrected to "gitdir: ../../.git/modules/sub1/modules/nested".
An alternative I considered to do this work lazily, i.e. when resolving
"../.git/modules/nested", we would notice the ".git" being a gitfile
linking to another path. That seemed to be robuster by design, but harder
to get the implementation right. Maybe we have to do that anyway once we
try to have submodules and worktrees working nicely together, but for now
just produce 'correct' (i.e. direct) pointers.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future we want to support working tree operations within submodules,
e.g. "git checkout --recurse-submodules", which will update the submodule
to the commit as recorded in its superproject. In the submodule the
unpack-tree operation is carried out as usual, but the reporting to the
user needs to prefix any path with the superproject. The mechanism for
this is the super-prefix. (see 74866d757, git: make super-prefix option)
Add support for the super-prefix option for commands that unpack trees
by wrapping any path output in unpacking trees in the newly introduced
super_prefixed function. This new function prefixes any path with the
super-prefix if there is one. Assuming the submodule case doesn't happen
in the majority of the cases, we'd want to have a fast behavior for no
super prefix, i.e. no reallocation/copying, but just returning path.
Another aspect of introducing the `super_prefixed` function is to consider
who owns the memory and if this is the right place where the path gets
modified. As the super prefix ought to change the output behavior only and
not the actual unpack tree part, it is fine to be that late in the line.
As we get passed in 'const char *path', we cannot change the path itself,
which means in case of a super prefix we have to copy over the path.
We need two static buffers in that function as the error messages
contain at most two paths.
For testing purposes enable it in read-tree, which has no output
of paths other than an unpack-trees.c. These are all converted in
this patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loose objects are created with mode 0444. That doesn't
prevent them being overwritten by rename(), but some
versions of "mv" will be extra careful and prompt the user,
even without "-i".
Reportedly macOS does this, at least in the Travis builds.
The prompt reads from /dev/null, defaulting to "no", and the
object isn't moved. Then to make matters even more
interesting, it still returns "0" and the rest of the test
proceeds, but with a broken setup.
We can work around it by using "mv -f" to override the
prompt. This should work as it's already used in t5504 for
the same purpose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have a 256 colors terminal (or one with true color support), then
the predefined 12 colors seem limited. On the other hand, you don't want
to draw graph lines with every single color in this mode because the two
colors could look extremely similar. This option allows you to hand pick
the colors you want.
Even with standard terminal, if your background color is neither black
or white, then the graph line may match your background and become
hidden. You can exclude your background color (or simply the colors you
hate) with this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* sb/cd-then-git-can-be-written-as-git-c:
lib-submodule-update.sh: reduce use of subshell by using "git -C"
|
|
The prereleaseSuffix feature of version comparison that is used in
"git tag -l" did not correctly when two or more prereleases for the
same release were present (e.g. when 2.0, 2.0-beta1, and 2.0-beta2
are there and the code needs to compare 2.0-beta1 and 2.0-beta2).
* sg/fix-versioncmp-with-common-suffix:
versioncmp: generalize version sort suffix reordering
versioncmp: factor out helper for suffix matching
versioncmp: use earliest-longest contained suffix to determine sorting order
versioncmp: cope with common part overlapping with prerelease suffix
versioncmp: pass full tagnames to swap_prereleases()
t7004-tag: add version sort tests to show prerelease reordering issues
t7004-tag: use test_config helper
t7004-tag: delete unnecessary tags with test_when_finished
|
|
"git diff" learned diff.interHunkContext configuration variable
that gives the default value for its --inter-hunk-context option.
* vn/diff-ihc-config:
diff: add interhunk context config option
|
|
Error message fix.
* sb/submodule-init:
submodule update --init: display correct path from submodule
|
|
Test updates.
* sb/submodule-config-tests:
t7411: test lookup of uninitialized submodules
t7411: quote URLs
|
|
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
|
|
Move detection of dangling refs into show_one(), so that they are
detected when --verify is present as well as when it is absent.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move handling of -d into show_one(), so that it takes effect when
--verify is present as well as when it is absent. This is useful when
the user wishes to avoid the costly iteration of refs.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, when --verify was specified, show-ref would use a separate
code path which did not handle HEAD and treated it as an invalid
ref. Thus, "git show-ref --verify HEAD" (where "--verify" is used
because the user is not interested in seeing refs/remotes/origin/HEAD)
did not work as expected.
Instead of insisting that the input begins with "refs/", allow "HEAD"
as well in the codepath that handles "--verify", so that all valid
full refnames including HEAD are passed to the same output machinery.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a sort command to test-string-list that reads lines from stdin,
stores them in a string_list and then sorts it. Use it in a simple
perf test script to measure the performance of string_list_sort().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the really nice features of the ~/.gitconfig file is that users
can override defaults by their own preferred settings for all of their
repositories.
One such default that some users like to override is whether the
"origin" remote gets auto-pruned or not. The user would simply call
git config --global remote.origin.prune true
and from now on all "origin" remotes would be pruned automatically when
fetching into the local repository.
There is just one catch: now Git thinks that the "origin" remote is
configured, even if the repository config has no [remote "origin"]
section at all, as it does not realize that the "prune" setting was
configured globally and that there really is no "origin" remote
configured in this repository.
That is a problem e.g. when renaming a remote to a new name, when Git
may be fooled into thinking that there is already a remote of that new
name.
Let's fix this by paying more attention to *where* the remote settings
came from: if they are configured in the local repository config, we
must not overwrite them. If they were configured elsewhere, we cannot
overwrite them to begin with, as we only write the repository config.
There is only one caller of remote_is_configured() (in `git fetch`) that
may want to take remotes into account even if they were configured
outside the repository config; all other callers essentially try to
prevent the Git command from overwriting settings in the repository
config.
To accommodate that fact, the remote_is_configured() function now
requires a parameter that states whether the caller is interested in all
remotes, or only in those that were configured in the repository config.
Many thanks to Jeff King whose tireless review helped with settling for
nothing less than the current strategy.
This fixes https://github.com/git-for-windows/git/issues/888
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users like to set `remote.origin.prune = true` in their ~/.gitconfig
so that all of their repositories use that default.
However, our code is ill-prepared for this, mistaking that single entry to
mean that there is already a remote of the name "origin", even if there is
not.
This patch adds a test case demonstrating this issue.
Reported by Andrew Arnott.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It served its purpose, but now we have a builtin difftool. Time for the
Perl script to enjoy Florida.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mergetool" without any pathspec on the command line that is
run from a subdirectory became no-op in Git v2.11 by mistake, which
has been fixed.
* rh/mergetool-regression-fix:
mergetool: fix running in subdir when rerere enabled
mergetool: take the "-O" out of $orderfile
t7610: add test case for rerere+mergetool+subdir bug
t7610: spell 'git reset --hard' consistently
t7610: don't assume the checked-out commit
t7610: always work on a test-specific branch
t7610: delete some now-unnecessary 'git reset --hard' lines
t7610: run 'git reset --hard' after each test to clean up
t7610: don't rely on state from previous test
t7610: use test_when_finished for cleanup tasks
t7610: move setup code to the 'setup' test case
t7610: update branch names to match test number
rev-parse doc: pass "--" to rev-parse in the --prefix example
.mailmap: record canonical email for Richard Hansen
|
|
Running "git add a/b" when "a" is a submodule correctly errored
out, but without a meaningful error message.
* sb/pathspec-errors:
pathspec: give better message for submodule related pathspec error
|
|
Test cleanup.
* pb/test-must-fail-is-for-git:
t9813: avoid using pipes
don't use test_must_fail with grep
|
|
"git push \\server\share\dir" has recently regressed and then
fixed. A test has retroactively been added for this breakage.
* js/mingw-test-push-unc-path:
mingw: add a regression test for pushing to UNC paths
|
|
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
|
Michael Rappazzo
Junio C Hamano
Jeff King
Cornelius Weig
Matt McCutchen
Johannes Schindelin
Stefan Beller
Nguyễn Thái Ngọc Duy
Vladimir Panteleev
René Scharfe