| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git clone $URL", when cloning from a site whose sole purpose is to
host a single repository (hence, no path after <scheme>://<site>/),
tried to use the site name as the new repository name, but did not
remove username or password when <site> part was of the form
<user>@<pass>:<host>. The code is taught to redact these.
* ps/guess-repo-name-at-root:
clone: abort if no dir name could be guessed
clone: do not use port number as dir name
clone: do not include authentication data in guessed dir
|
|
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
|
|
A negative !ref entry in multi-value transfer.hideRefs
configuration can be used to say "don't hide this one".
* jk/negative-hiderefs:
refs: support negative transfer.hideRefs
docs/config.txt: reorder hideRefs config
|
|
Running tests with the "-x" option to make them verbose had some
unpleasant interactions with other features of the test suite.
* jk/test-with-x:
test-lib: disable trace when test is not verbose
test-lib: turn off "-x" tracing during chain-lint check
|
|
t1509 test that requires a dedicated VM environment had some
bitrot, which has been corrected.
* ps/t1509-chroot-test-fixup:
tests: fix cleanup after tests in t1509-root-worktree
tests: fix broken && chains in t1509-root-worktree
|
|
Allow untracked cache (experimental) to be used when sparse
checkout (experimental) is also in use.
* dt/untracked-sparse:
untracked-cache: support sparse checkout
|
|
"git pull --rebase" has been taught to pay attention to
rebase.autostash configuration.
* kd/pull-rebase-autostash:
pull: allow dirty tree when rebase.autostash enabled
|
|
The code to perform multi-tree merges has been taught to repopulate
the cache-tree upon a successful merge into the index, so that
subsequent "diff-index --cached" (hence "status") and "write-tree"
(hence "commit") will go faster.
The same logic in "git checkout" may now be removed, but that is a
separate issue.
* dt/unpack-trees-cache-tree-revalidate:
unpack-trees: populate cache-tree on successful merge
|
|
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.
* dt/reflog-tests:
tests: remove some direct access to .git/logs
t/t7509: remove unnecessary manipulation of reflog
|
|
The "new-worktree-mode" hack in "checkout" that was added in
nd/multiple-work-trees topic has been removed by updating the
implementation of new "worktree add".
* es/worktree-add-cleanup: (25 commits)
Documentation/git-worktree: fix duplicated 'from'
Documentation/config: mention "now" and "never" for 'expire' settings
Documentation/git-worktree: fix broken 'linkgit' invocation
checkout: drop intimate knowledge of newly created worktree
worktree: populate via "git reset --hard" rather than "git checkout"
worktree: avoid resolving HEAD unnecessarily
worktree: make setup of new HEAD distinct from worktree population
worktree: detect branch-name/detached and error conditions locally
worktree: add_worktree: construct worktree-population command locally
worktree: elucidate environment variables intended for child processes
worktree: make branch creation distinct from worktree population
worktree: add: suppress auto-vivication with --detach and no <branch>
worktree: make --detach mutually exclusive with -b/-B
worktree: introduce options container
worktree: simplify new branch (-b/-B) option checking
worktree: improve worktree setup message
branch: publish die_if_checked_out()
checkout: teach check_linked_checkout() about symbolic link HEAD
checkout: check_linked_checkout: simplify symref parsing
checkout: check_linked_checkout: improve "already checked out" aesthetic
...
|
|
Rewrite "am" in "C".
* pt/am-builtin: (46 commits)
git-am: add am.threeWay config variable
builtin-am: remove redirection to git-am.sh
builtin-am: check for valid committer ident
builtin-am: implement legacy -b/--binary option
builtin-am: implement -i/--interactive
builtin-am: support and auto-detect mercurial patches
builtin-am: support and auto-detect StGit series files
builtin-am: support and auto-detect StGit patches
builtin-am: rerere support
builtin-am: invoke post-applypatch hook
builtin-am: invoke pre-applypatch hook
builtin-am: invoke applypatch-msg hook
builtin-am: support automatic notes copying
builtin-am: invoke post-rewrite hook
builtin-am: implement -S/--gpg-sign, commit.gpgsign
builtin-am: implement --committer-date-is-author-date
builtin-am: implement --ignore-date
builtin-am: pass git-apply's options to git-apply
builtin-am: implement --[no-]scissors
builtin-am: support --keep-cr, am.keepcr
...
|
|
Code and documentation clean-up to "git bisect".
* ad/bisect-cleanup:
bisect: don't mix option parsing and non-trivial code
bisect: simplify the addition of new bisect terms
bisect: replace hardcoded "bad|good" by variables
Documentation/bisect: revise overall content
Documentation/bisect: move getting help section to the end
bisect: correction of typo
|
|
If the URI contains a port number and the URI's path component is
empty we fail to guess a sensible directory name. E.g. cloning a
repository 'ssh://example.com:2222/' we guess a directory name
'2222' where we would want the hostname only, e.g. 'example.com'.
We need to take care to not drop trailing port-like numbers in
certain cases. E.g. when cloning a repository 'foo/bar:2222.git'
we want to guess the directory name '2222' instead of 'bar'.
Thus, we have to first check the stripped URI for path separators
and only strip port numbers if there are path separators present.
This heuristic breaks when cloning a repository 'bar:2222.git',
though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the URI contains authentication data and the URI's path
component is empty, we fail to guess a sensible directory name.
E.g. cloning a repository 'ssh://user:password@example.com/' we
guess a directory name 'password@example.com' where we would want
the hostname only, e.g. 'example.com'.
The naive way of just adding '@' as a path separator would break
cloning repositories like 'foo/bar@baz.git' (which would
currently become 'bar@baz' but would then become 'baz' only).
Instead fix this by first dropping the scheme and then greedily
scanning for an '@' sign until we find the first path separator.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7e837c6 (clone: simplify string handling in
guess_dir_name(), 2015-07-09) changed clone to use
strip_suffix instead of hand-rolled pointer manipulation.
However, strip_suffix will strip from the end of a
NUL-terminated string, and we may have already stripped some
characters (like directory separators, or "/.git"). This
leads to commands like:
git clone host:foo.git/
failing to strip the ".git".
We must instead convert our pointer arithmetic into a
computed length and feed that to strip_suffix_mem, which will
then reduce the length further for us.
It would be nicer if we could drop the pointer manipulation
entirely, and just continually strip using strip_suffix. But
that doesn't quite work for two reasons:
1. The early suffixes we're stripping are not constant; we
need to look for is_dir_sep, which could be one of
several characters.
2. Mid-way through the stripping we compute the pointer
"start", which shows us the beginning of the pathname.
Which really give us two lengths to work with: the
offset from the start of the string, and from the start
of the path. By using pointers for the early part, we
can just compute the length from "start" when we need
it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we run "git clone $url", clone guesses from the $url
what to name the local output directory. We don't have any
test coverage of this, so let's add some basic tests.
This reveals a few problems:
- cloning "foo.git/" does not properly remove the ".git";
this is a recent regression from 7e837c6 (clone:
simplify string handling in guess_dir_name(), 2015-07-09)
- likewise, cloning foo/.git does not seem to handle the
bare case (we should end up in foo.git, but we try to
use foo/.git on the local end), which also comes from
7e837c6.
- cloning the root is not very smart about URL parsing,
and usernames and port numbers may end up in the
directory name
All of these tests are marked as failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "-x" test-script option turns on the shell's "-x"
tracing, which can help show why a particular test is
failing. Unfortunately, this can create false negatives in
some tests if they invoke a shell function with its stderr
redirected. t5512.10 is such a test, as it does:
test_must_fail git ls-remote refs*master >actual 2>&1 &&
test_cmp exp actual
The "actual" file gets the "-x" trace for the test_must_fail
function, which prevents it from matching the expected
output.
There's no way to avoid this without managing the
trace flag inside each sub-function, which isn't really a
workable solution. But unless you specifically care about
t5512.10, we can work around it by enabling tracing only for
the specific tests we want.
You can already do:
./t5512-ls-remote.sh -x --verbose-only=16
to see the trace only for a specific test. But that doesn't
_disable_ the tracing in the other tests; it just sends it
to /dev/null. However, there's no point in generating a
trace that the user won't see, so we can simply disable
tracing whenever it doesn't have a matching verbose flag.
The normal case of just "./t5512-ls-remote.sh -x" stays the
same, as "-x" already implies "--verbose" (and
"--verbose-only" overrides "--verbose", which is why this
works at all). And for our test, we need only check
$verbose, as maybe_setup_verbose will have already
set that flag based on the $verbose_only list).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that GIT_TEST_CHAIN_LINT is on by default, running:
./t0000-basic.sh -x --verbose-only=1
starts with:
expecting success:
find .git/objects -type f -print >should-be-empty &&
test_line_count = 0 should-be-empty
+ exit 117
error: last command exited with $?=117
+ find .git/objects -type f -print
+ test_line_count = 0 should-be-empty
+ test 3 != 3
+ wc -l
+ test 0 = 0
ok 1 - .git/objects should be empty after git init in an empty repo
This is confusing, as the "exit 117" line and the error line
(which is printed in red, no less!) are not part of the test
at all, but are rather in the separate chain-lint test_eval.
Let's unset the "trace" variable when eval-ing the chain
lint check, which avoids this.
Note that we cannot just do a one-shot variable like:
trace= test_eval ...
as the behavior of one-shot variables for function calls
is not portable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you hide a hierarchy of refs using the transfer.hideRefs
config, there is no way to later override that config to
"unhide" it. This patch implements a "negative" hide which
causes matches to immediately be marked as unhidden, even if
another match would hide it. We take care to apply the
matches in reverse-order from how they are fed to us by the
config machinery, as that lets our usual "last one wins"
config precedence work (and entries in .git/config, for
example, will override /etc/gitconfig).
So you can now do:
$ git config --system transfer.hideRefs refs/secret
$ git config transfer.hideRefs '!refs/secret/not-so-secret'
to hide refs/secret in all repos, except for one public bit
in one specific repo. Or you can even do:
$ git clone \
-u "git -c transfer.hiderefs="!refs/foo" upload-pack" \
remote:repo.git
to clone remote:repo.git, overriding any hiding it has
configured.
There are two alternatives that were considered and
rejected:
1. A generic config mechanism for removing an item from a
list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo").
This is nice because it could apply to other
multi-valued config, as well. But it is not nearly as
flexible. There is no way to say:
[transfer]
hideRefs = refs/secret
hideRefs = refs/secret/not-so-secret
Having explicit negative specifications means we can
override previous entries, even if they are not the
same literal string.
2. Adding another variable to override some parts of
hideRefs (e.g., "exposeRefs").
This solves the problem from alternative (1), but it
cannot easily obey the normal config precedence,
because it would use two separate lists. For example:
[transfer]
hideRefs = refs/secret
exposeRefs = refs/secret/not-so-secret
hideRefs = refs/secret/not-so-secret/no-really-its-secret
With two lists, we have to apply the "expose" rules
first, and only then apply the "hide" rules. But that
does not match what the above config intends.
Of course we could internally parse that to a single
list, respecting the ordering, which saves us having to
invent the new "!" syntax. But using a single name
communicates to the user that the ordering _is_
important. And "!" is well-known for negation, and
should not appear at the beginning of a ref (it is
actually valid in a ref-name, but all entries here
should be fully-qualified, starting with "refs/").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During cleanup we do a simple 'rm /*' to remove leftover files
from previous tests. As 'rm' errors out when there is anything it
cannot delete and there are directories present at '/' it will
throw an error, causing the '&&' chain to fail.
Fix this by explicitly removing the files.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow an asterisk as a substring (as opposed to the entirety) of
a path component for both side of a refspec, e.g.
"refs/heads/o*:refs/remotes/heads/i*".
* jk/refspec-parse-wildcard:
refs: loosen restriction on wildcard "*" refspecs
refs: cleanup comments regarding check_refname_component()
|
|
New userdiff pattern definition for fountain screenwriting markup
format.
* zb/userdiff-fountain:
userdiff: add support for Fountain documents
|
|
In preparation for allowing different "backends" to store the refs
in a way different from the traditional "one ref per file in $GIT_DIR
or in a $GIT_DIR/packed-refs file" filesystem storage, reduce
direct filesystem access to ref-like things like CHERRY_PICK_HEAD
from scripts and programs.
* dt/refs-backend-preamble:
git-stash: use update-ref --create-reflog instead of creating files
update-ref and tag: add --create-reflog arg
refs: add REF_FORCE_CREATE_REFLOG flag
git-reflog: add exists command
refs: new public ref function: safe_create_reflog
refs: break out check for reflog autocreation
refs.c: add err arguments to reflog functions
|
|
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
|
|
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
|
|
* pt/am-tests:
t3901: test git-am encoding conversion
t3418: non-interactive rebase --continue with rerere enabled
t4150: tests for am --[no-]scissors
t4150: am with post-applypatch hook
t4150: am with pre-applypatch hook
t4150: am with applypatch-msg hook
t4150: am --resolved fails if index has unmerged entries
t4150: am --resolved fails if index has no changes
t4150: am refuses patches when paused
t4151: am --abort will keep dirty index intact
t4150: am fails if index is dirty
t4150: am.messageid really adds the message id
|
|
Optimize computation of untracked status indicator by bash prompt
script (in contrib/).
* sg/bash-prompt-untracked-optim:
bash prompt: faster untracked status indicator with untracked directories
bash prompt: test untracked files status indicator with untracked dirs
|
|
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
|
|
"git fast-import" learned to respond to the get-mark command via
its cat-blob-fd interface.
* mh/fast-import-get-mark:
fast-import: add a get-mark command
|
|
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
|
|
Add a new configuration variable to enable "--follow" automatically
when "git log" is run with one pathspec argument.
* dt/log-follow-config:
log: add "log.follow" configuration variable
|
|
Teach "git status" to show a more detailed information regarding
the "rebase -i" session in progress.
* gp/status-rebase-i-info:
status: add new tests for status during rebase -i
status: give more information during rebase -i
status: differentiate interactive from non-interactive rebases
status: factor two rebase-related messages together
|
|
"cat-file" learned "--batch-all-objects" option to enumerate all
available objects in the repository more quickly than "rev-list
--all --objects" (the output includes unreachable objects, though).
* jk/cat-file-batch-all:
cat-file: sort and de-dup output of --batch-all-objects
cat-file: add --batch-all-objects option
cat-file: split batch_one_object into two stages
cat-file: stop returning value from batch_one_object
cat-file: add --buffer option
cat-file: move batch_options definition to top of file
cat-file: minor style fix in options list
|
|
Allow ignoring fsck errors on specific set of known-to-be-bad
objects, and also tweaking warning level of various kinds of non
critical breakages reported.
* js/fsck-opt:
fsck: support ignoring objects in `git fsck` via fsck.skiplist
fsck: git receive-pack: support excluding objects from fsck'ing
fsck: introduce `git fsck --connectivity-only`
fsck: support demoting errors to warnings
fsck: document the new receive.fsck.<msg-id> options
fsck: allow upgrading fsck warnings to errors
fsck: optionally ignore specific fsck issues completely
fsck: disallow demoting grave fsck errors to warnings
fsck: add a simple test for receive.fsck.<msg-id>
fsck: make fsck_tag() warn-friendly
fsck: handle multiple authors in commits specially
fsck: make fsck_commit() warn-friendly
fsck: make fsck_ident() warn-friendly
fsck: report the ID of the error/warning
fsck (receive-pack): allow demoting errors to warnings
fsck: offer a function to demote fsck errors to warnings
fsck: provide a function to parse fsck message IDs
fsck: introduce identifiers for fsck messages
fsck: introduce fsck options
|
|
Enhance packet tracing machinery to allow capturing an incoming
pack data to a file for debugging.
* jk/pkt-log-pack:
pkt-line: support tracing verbatim pack contents
pkt-line: tighten sideband PACK check when tracing
pkt-line: simplify starts_with checks in packet tracing
|
|
"git rebase -i"'s list of todo is made configurable.
* mr/rebase-i-customize-insn-sheet:
git-rebase--interactive.sh: add config option for custom instruction format
|
|
"git send-email" now performs alias-expansion on names that are
given via --cccmd, etc.
This round comes with a lot more enhanced e-mail address parser,
which makes it a bit scary, but as long as it works as designed, it
makes it wonderful ;-).
* rl/send-email-aliases:
send-email: suppress meaningless whitespaces in from field
send-email: allow multiple emails using --cc, --to and --bcc
send-email: consider quote as delimiter instead of character
send-email: reduce dependencies impact on parse_address_line
send-email: minor code refactoring
send-email: allow use of aliases in the From field of --compose mode
send-email: refactor address list process
t9001-send-email: refactor header variable fields replacement
send-email: allow aliases in patch header and command script outputs
t9001-send-email: move script creation in a setup test
|
|
Running an aliased command from a subdirectory when the .git thing
in the working tree is a gitfile pointing elsewhere did not work.
* nd/export-worktree:
setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR
|
|
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
|
|
Move machinery to parse human-readable scaled numbers like 1k, 4M,
and 2G as an option parameter's value from pack-objects to
parse-options API, to make it available to other codepaths.
* cb/parse-magnitude:
parse-options: move unsigned long option parsing out of pack-objects.c
test-parse-options: update to handle negative ints
|
|
"git verify-tag" and "git verify-commit" have been taught to share
more code, and then learned to optionally show the verification
message from the underlying GPG implementation.
* bc/gpg-verify-raw:
verify-tag: add option to print raw gpg status information
verify-commit: add option to print raw gpg status information
gpg: centralize printing signature buffers
gpg: centralize signature check
verify-commit: add test for exit status on untrusted signature
verify-tag: share code with verify-commit
verify-tag: add tests
|
|
Various enhancements around "git am" reading patches generated by
foreign SCM.
* pt/am-foreign:
am: teach mercurial patch parser how to read from stdin
am: use gmtime() to parse mercurial patch date
t4150: test applying StGit series
am: teach StGit patch parser how to read from stdin
t4150: test applying StGit patch
|
|
Remove a check that would disable the untracked cache for sparse
checkouts. Add tests that ensure that the untracked cache works with
sparse checkouts -- specifically considering the case that a file
foo/bar is checked out, but foo/.gitignore is not.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we unpack trees into an existing index, we discard the old
index and replace it with the new, merged index. Ensure that this
index has its cache-tree populated. This will make subsequent git
status and commit commands faster.
Signed-off-by: Brian Degenhardt <bmd@bmdhacks.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unnecessary reflog manipulation. The test does not rely in any
way on this reflog manipulation, and the case that the test
exercises is unrelated to reflogs.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
|
|
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
|
Junio C Hamano
Patrick Steinhardt
Jeff King
Remi Lespinet
David Turner
Brian Degenhardt