| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
|
|
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
|
|
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* js/t1450-making-it-writable-does-not-need-full-posixperm:
t1450-fsck: exec-bit is not needed to make loose object writable
|
|
A test case wants to append stuff to a loose object file to ensure
that this kind of corruption is detected. To make a read-only loose
object file writable with chmod, it is not necessary to also make
it executable. Replace the bitmask 755 with the instruction +w to
request only the write bit and to also heed the umask. And get rid
of a POSIXPERM prerequisite, which is unnecessary for the test.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test simplification.
* fs/gpg-unknown-key-test-fix:
t/gpg: simplify test for unknown key
|
|
Fix calling dynamically loaded functions on Windows.
* ma/windows-dynload-fix:
lazyload: use correct calling conventions
|
|
"git merge $signed_tag" started to drop the tag message from the
default merge message it uses by accident, which has been corrected.
* fs/ssh-signing-key-lifetime:
fmt-merge-msg: prevent use-after-free with signed tags
|
|
To test for a key that is completely unknown to the keyring we need one
to sign the commit with. This was done by generating a new key and not
add it into the keyring. To avoid the key generation overhead and
problems where GPG did hang in CI during it, switch GNUPGHOME to the
empty $GNUPGHOME_NOT_USED instead, therefore making all used keys unknown
for this single `verify-commit` call.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When merging a signed tag, fmt_merge_msg_sigs() is responsible for
populating the body of the merge message with the names of the signed
tags, their signatures, and the validity of those signatures.
In 02769437e1 (ssh signing: use sigc struct to pass payload,
2021-12-09), check_signature() was taught to pass the object payload via
the sigc struct instead of passing the payload buffer separately.
In effect, 02769437e1 causes buf, and sigc.payload to point at the same
region in memory. This causes a problem for fmt_tag_signature(), which
wants to read from this location, since it is freed beforehand by
signature_check_clear() (which frees it via sigc's `payload` member).
That makes the subsequent use in fmt_tag_signature() a use-after-free.
As a result, merge messages did not contain the body of any signed tags.
Luckily, they tend not to contain garbage, either, since the result of
strstr()-ing the object buffer in fmt_tag_signature() is guarded:
const char *tag_body = strstr(buf, "\n\n");
if (tag_body) {
tag_body += 2;
strbuf_add(tagbuf, tag_body, buf + len - tag_body);
}
Unfortunately, the tests in t6200 did not catch this at the time because
they do not search for the body of signed tags in fmt-merge-msg's
output.
Resolve this by waiting to call signature_check_clear() until after its
contents can be safely discarded. Harden ourselves against any future
regressions in this area by making sure we can find signed tag messages
in the output of fmt-merge-msg, too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash apply" forgot to attempt restoring untracked files when
it failed to restore changes to tracked ones.
* en/stash-df-fix:
stash: do not return before restoring untracked files
|
|
Typofix.
* ms/t-readme-typofix:
t/README: fix typo
|
|
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
|
|
A corner case bug in the ort merge strategy has been corrected.
* en/merge-ort-renorm-with-rename-delete-conflict-fix:
merge-ort: fix bug with renormalization and rename/delete conflicts
|
|
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
|
|
"git apply --3way" bypasses the attempt to do a three-way
application in more cases to address the regression caused by the
recent change to use direct application as a fallback.
* jz/apply-3-corner-cases:
git-apply: skip threeway in add / rename cases
|
|
"git stash" by default triggers its "push" action, but its
implementation also made "git stash -h" to show short help only for
"git stash push", which has been corrected.
* ab/do-not-limit-stash-help-to-push:
stash: don't show "git stash push" usage on bad "git stash" usage
|
|
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
|
|
Test updates.
* hn/ref-api-tests-update:
t7004: use "test-tool ref-store" for reflog inspection
t7004: create separate tags for different tests
t5550: require REFFILES
t5540: require REFFILES
|
|
Perf tests were run with end-user's shell, but it has been
corrected to use the shell specified by $TEST_SHELL_PATH.
* ja/perf-use-specified-shell:
t/perf: do not run tests in user's $SHELL
|
|
Debugging support for refs API.
* hn/test-ref-store-show-hash-algo:
test-ref-store: print hash algorithm
|
|
Use of certain "git rev-list" options with "git fast-export"
created nonsense results (the worst two of which being "--reverse"
and "--invert-grep --grep=<foo>"). The use of "--first-parent" is
made to behave a bit more sensible than before.
* ws/fast-export-with-revision-options:
fast-export: fix surprising behavior with --first-parent
|
|
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
|
|
Christoph Reiter reported on the Git for Windows issue tracker[1], that
mingw_strftime() imports strftime() from ucrtbase.dll with the wrong
calling convention. It should be __cdecl instead of WINAPI, which we
always use in DECLARE_PROC_ADDR().
The MSYS2 project encountered cmake sefaults on x86 Windows caused by
the same issue in the cmake source. [2] There are no known git crashes
that where caused by this, yet, but we should try to prevent them.
We import two other non-WINAPI functions via DECLARE_PROC_ADDR(), too.
* NtSetSystemInformation() (NTAPI)
* GetUserNameExW() (SEC_ENTRY)
NTAPI, SEC_ENTRY and WINAPI are all ususally defined as __stdcall,
but there are circumstances where they're defined differently.
Teach DECLARE_PROC_ADDR() about calling conventions and be explicit
about when we want to use which calling convention.
Import winnt.h for the definition of NTAPI and sspi.h for SEC_ENTRY
near their respective only users.
[1] https://github.com/git-for-windows/git/issues/3560
[2] https://github.com/msys2/MINGW-packages/issues/10152
Reported-By: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep --perl-regexp" failed to match UTF-8 characters with
wildcard when the pattern consists only of ASCII letters, which has
been corrected.
* rs/pcre2-utf:
grep/pcre2: factor out literal variable
grep/pcre2: use PCRE2_UTF even with ASCII patterns
|
|
Test fixes.
* jc/t4204-do-not-write-git-on-upstream-of-pipe:
t4204 is not sanitizer clean at all
|
|
"git log --invert-grep --author=<name>" used to exclude commits
written by the given author, but now "--invert-grep" only affects
the matches made by the "--grep=<pattern>" option.
* rs/log-invert-grep-with-headers:
log: let --invert-grep only invert --grep
|
|
Test fix.
* rs/t4202-invert-grep-test-fix:
t4202: fix patternType setting in --invert-grep test
|
|
Two fixes around "git repack".
* ds/repack-fixlets:
repack: make '--quiet' disable progress
repack: respect kept objects with '--write-midx -b'
|
|
The default merge message prepared by "git merge" records the name
of the current branch; the name can be overridden with a new option
to allow users to pretend a merge is made on a different branch.
* jc/merge-detached-head-name:
merge: allow to pretend a merge is made into a different branch
|
|
Correctness and performance update to "diff --color-moved" feature.
* pw/diff-color-moved-fix:
diff --color-moved: intern strings
diff: use designated initializers for emitted_diff_symbol
diff --color-moved-ws=allow-indentation-change: improve hash lookups
diff --color-moved: stop clearing potential moved blocks
diff --color-moved: shrink potential moved blocks as we go
diff --color-moved: unify moved block growth functions
diff --color-moved: call comparison function directly
diff --color-moved-ws=allow-indentation-change: simplify and optimize
diff: simplify allow-indentation-change delta calculation
diff --color-moved: avoid false short line matches and bad zebra coloring
diff --color-moved=zebra: fix alternate coloring
diff --color-moved: rewind when discarding pmb
diff --color-moved: factor out function
diff --color-moved: clear all flags on blocks that are too short
diff --color-moved: add perf tests
|
|
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
|
|
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
|
|
The RCS keyword substitution in "git p4" used to be done assuming
that the contents are UTF-8 text, which can trigger decoding
errors. We now treat the contents as a bytestring for robustness
and correctness.
* jh/p4-rcs-expansion-in-bytestring:
git-p4: resolve RCS keywords in bytes not utf-8
git-p4: open temporary patch file for write only
git-p4: add raw option to read_pipelines
git-p4: pre-compile RCS keyword regexes
git-p4: use with statements to close files after use in patchRCSKeywords
|
|
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are all replaced by "the option '%s' requires '%s'", which is a
new string but replaces 17 previous unique strings.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use placeholders for constant tokens. The strings are turned into
"cannot be used together"
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit bee8691f19 ("stash: restore untracked files AFTER restoring
tracked files", 2021-09-10), we correctly identified that we should
restore changes to tracked files before attempting to restore untracked
files, and accordingly moved the code for restoring untracked files a
few lines down in do_apply_stash(). Unfortunately, the intervening
lines had some early return statements meaning that we suddenly stopped
restoring untracked files in some cases.
Even before the previous commit, there was another possible issue with
the current code -- a post-stash-apply 'git status' that was intended
to be run after restoring the stash was skipped when we hit a conflict
(or other error condition), which seems slightly inconsistent.
Fix both issues by saving the return status, and letting other
functionality run before returning.
Reported-by: AJ Henderson
Test-case-by: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
|
|
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
|
|
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test to t1091-sparse-checkout-builtin.sh that would result in an
infinite loop and out-of-memory error before this change. The issue
relies on having non-cone-mode patterns while trying to modify the
patterns in cone-mode.
The fix is simple, allowing us to break from the loop when the input
path does not contain a slash, as the "dir" pattern we added does not.
This is only a fix to the critical out-of-memory error. A better
response to such a strange state will follow in a later change.
Reported-by: Calbabreaker <calbabreaker@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Then core.sparseCheckoutCone is enabled, the sparse-checkout patterns are
used to populate two hashsets that accelerate pattern matching. If the user
modifies the sparse-checkout file outside of the 'sparse-checkout' builtin,
then strange patterns can happen, triggering some error checks.
One of these error checks is possible to hit when some special characters
exist in a line. A warning message is correctly written to stderr, but then
there is additional logic that attempts to remove the line from the hashset
and free the data. This leads to a segfault in the 'git sparse-checkout
list' command because it iterates over the contents of the hashset, which is
now invalid.
The fix here is to stop trying to remove from the hashset. In addition,
we disable cone mode sparse-checkout because of the malformed data. This
results in the pattern-matching working with a possibly-slower
algorithm, but using the patterns as they are in the sparse-checkout
file.
This also changes the behavior of commands such as 'git sparse-checkout
list' because the output patterns will be the contents of the
sparse-checkout file instead of the list of directories. This is an
existing behavior for other types of bad patterns.
Add a test that triggers the segfault without the code change.
Reported-by: John Burnett <johnburnett@johnburnett.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since commit a492d5331c ("merge-ort: ensure we consult df_conflict
and path_conflicts", 2021-06-30), when renormalization is active AND a
file is involved in a rename/delete conflict BUT the file is unmodified
(either before or after renormalization), merge-ort was running into an
assertion failure. Prior to that commit (or if assertions were compiled
out), merge-ort would mis-merge instead, ignoring the rename/delete
conflict and just deleting the file.
Remove the assertions, fix the code appropriately, leave some good
comments in the code, and add a testcase for this situation.
Reported-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The environment variable $SHELL is usually set to the user's
interactive shell. Our build and test scripts never use $SHELL because
there are no guarantees about its input language. Instead, we use
/bin/sh which should be a POSIX shell.
For systems with a broken /bin/sh, we allow to override that path via
SHELL_PATH. To run tests in yet another shell we allow to override
SHELL_PATH with TEST_SHELL_PATH.
Perf tests run in $SHELL via a wrapper defined in t/perf/perf-lib.sh,
so they break with e.g. SHELL=python. Use TEST_SHELL_PATH like
in other tests. TEST_SHELL_PATH is always defined because
t/perf/perf-lib.sh includes t/test-lib.sh, which includes
GIT-BUILD-OPTIONS.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The chainlint test script linter in the test suite has been updated.
* es/chainlint:
chainlint.sed: stop splitting "(..." into separate lines "(" and "..."
chainlint.sed: swallow comments consistently
chainlint.sed: stop throwing away here-doc tags
chainlint.sed: don't mistake `<< word` in string as here-doc operator
chainlint.sed: make here-doc "<<-" operator recognition more POSIX-like
chainlint.sed: drop subshell-closing ">" annotation
chainlint.sed: drop unnecessary distinction between ?!AMP?! and ?!SEMI?!
chainlint.sed: tolerate harmless ";" at end of last line in block
chainlint.sed: improve ?!SEMI?! placement accuracy
chainlint.sed: improve ?!AMP?! placement accuracy
t/Makefile: optimize chainlint self-test
t/chainlint/one-liner: avoid overly intimate chainlint.sed knowledge
t/chainlint/*.test: generalize self-test commentary
t/chainlint/*.test: fix invalid test cases due to mixing quote types
t/chainlint/*.test: don't use invalid shell syntax
|
Junio C Hamano
Elijah Newren
Johannes Sixt
Fabian Stelzer
Taylor Blau
Matthias Aßhauer
Jean-Noël Avila
Marc Strapetz
Derrick Stolee
Johannes Altmanninger