| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The test would not fail if the filtering failed to do anything, since
in
test -z "$(git diff HEAD directorymoved:newsubdir)"'
'directorymoved:newsubdir' is not valid, so git-diff fails without
printing anything on stdout. But then the exit status of git-diff is
lost, whereas test -z "" succeeds.
Use 'git diff --exit-code' instead, which does the right thing and has
the added bonus of showing the differences if there are any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check-ref-format --branch requires access to the repository
to resolve refs like @{-1}.
Noticed by Nguyễn Thái Ngọc Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/tap:
test-lib: Remove 3 year old no-op --no-python option
test-lib: Ignore --quiet under a TAP harness
|
|
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
If $HOME is unset (as in some automated build situations),
currently
git config --path path.home "~"
git config --path --get path.home
segfaults. Error out with
Failed to expand user dir in: '~/'
instead.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One test case checked the stdout and stderr of 'git add' by constructing a
single 'expect' file that contained both streams. But when the command
runs, the order of stdout and stderr output is unpredictable because it
depends on how the streams are buffered. At least on Windows, the buffering
is different from what the test case expected. Hence, check the two output
texts separately.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.6:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
|
|
* maint-1.6.5:
request-pull.txt: Document -p option
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
|
|
* maint-1.6.4:
Check size of path buffer before writing into it
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
|
|
These two tests weren't about how "git reflog show <branch>" exits when
there is no reflog, but were about "checkout" and "branch" create or not
create reflog when creating a new <branch>. Update the tests to check
what we are interested in, using "git rev-parse --verify".
Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from
nearby, to avoid exposing this particular implementation detail
unnecessarily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
See e2007832552ccea9befed9003580c494f09e666e
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t/README: clarify test_must_fail description
Check size of path buffer before writing into it
Conflicts:
t/README
|
|
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/add-n-ignore-missing:
git add: Add the "--ignore-missing" option for the dry run
|
|
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
|
|
* wp/merge-tree-fix:
merge-tree: fix where two branches share no changes
add basic tests for merge-tree
|
|
* js/merge-rr-fix:
MERGE_RR is in .git, not .git/rr-cache
|
|
* jn/tests:
t3000 (ls-files -o): modernize style
|
|
* jn/grep-open:
grep -O: Do not pass color sequences as filenames to pager
|
|
* jc/rebase-i-commit-msg-fix:
rebase-i: do not get fooled by a log message ending with backslash
rebase-i: style fix
|
|
* ab/submodule-add-f:
git submodule: add submodules with git add -f <path>
|
|
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
0af0ac7 (Move MERGE_RR from .git/rr-cache/ into .git/) moved the
location of MERGE_RR but I found a few references to the old
location.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
15b4f7a (merge-tree: use ll_merge() not xdl_merge(), 2010-01-16)
introduced a regression to merge-tree to cause it to segfault when merging
files which existed in one branch, but not in the other or in the
merge-base. This was caused by referencing entry->path at a time when
entry was known to be possibly-NULL.
To correct the problem, we save the path of the entry we came in with,
as the path should be the same among all the stages no matter which
sides are involved in the merge.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge-tree had no test cases, so here we add some very basic tests for
it, including some known-breakages.
[jc: with obvious/trivial fixups]
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/read-tree-cache-tree-fix:
Fix "read-tree -m A B" priming the cache-tree
|
|
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: Spelling fix in protocol-capabilities.txt
checkout: accord documentation to what git does
t0005: work around strange $? in ksh when program terminated by a signal
|
|
This script is part of the second batch of tests, from the same day
the test infrastructure was added to git. Update it to use a more
modern style in the spirit of v1.6.4-rc0~45^2~2 (2009-05-22).
In particular:
- Put setup code inside test assertions, to avoid unexpected
breakages and avoid stray output without -v (as t/README
recommends); and
- Put the test title on the same line as the "test_expect_success",
and end the line with a single-quote to begin the body of the test
which is one multi-line string.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ksh93 is known to report $? of programs that terminated by a signal as
256 + signal number instead of 128 + signal number like other POSIX
compliant shells (ksh's behavior is still POSIX compliant in this regard).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ko/master: (2325 commits)
Git 1.7.2-rc2
backmerge a few more fixes to 1.7.1.X series
fix git branch -m in presence of cross devices
t/t0006: specify timezone as EST5 not EST to comply with POSIX
add missing && to submodule-merge testcase
t/README: document more test helpers
test-date: fix sscanf type conversion
xdiff: optimise for no whitespace difference when ignoring whitespace.
gitweb: Move evaluate_gitweb_config out of run_request
parse_date: fix signedness in timezone calculation
t0006: test timezone parsing
rerere.txt: Document forget subcommand
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
...
Conflicts:
builtin-read-tree.c
|
|
Change tests to skip with skip_all=* + test_done instead of using say
+ test_done.
This is a follow-up to "tests: Skip tests in a way that makes sense
under TAP" (fadb5156e4). I missed these cases when prepearing that
patch, hopefully this is all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 456156d a shortcut to priming the index tree reference was
introduced, but the justification for it was completely bogus.
"read-tree -m A B" is to take the index (and the working tree)
that is largely based on (but does not have to match exactly) A
and update it to B, while carrying the local change that does
not overlap the difference between A and B, so there is no reason
to expect that the resulting index should match the tree B.
Noticed and test provided by Heiko Voigt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When test #2 fails, the cwd is project/, causing all the
remaining tests in the same script to get confused and fail.
So in the spirit of v1.7.1.1~53^2~10 (t5550-http-fetch: Use subshell
for repository operations, 2010-04-17), use a subshell for svn
working copy operations. This way, the cwd will reliably return
to the top of the trash directory and later tests can still be run
when a command has failed.
Reported-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
@ is SVN's identifier for PEG revisions. But SVN's treatment of PEG
identifiers in copy target URLs changed in r954995/r952973, i.e. between
1.6.11 and 1.6.12. They get eaten now (which is considered the right
way).
Therefore, avoid the @ in the tests with funky branch names.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
With a .gitconfig like this:
[color]
ui = auto
[color "grep"]
filename = magenta
if stdout is a terminal, the grep machinery will output the color
sequence \e[36m before each filename in its output.
In the case of "git grep -O foo", output is argv for the pager.
Disable color when calling the grep machinery in this case.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/tap:
t/README: document more test helpers
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
t/t9700/test.pl: don't access private object members, use public access methods
t9700: Use Test::More->builder, not $Test::Builder::Test
tests: Say "pass" rather than "ok" on empty lines for TAP
tests: Skip tests in a way that makes sense under TAP
test-lib: output a newline before "ok" under a TAP harness
test-lib: Make the test_external_* functions TAP-aware
test-lib: Adjust output to be valid TAP format
|
|
* maint:
backmerge a few more fixes to 1.7.1.X series
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
fix git branch -m in presence of cross devices
Conflicts:
RelNotes
builtin/rev-parse.c
|
Thomas Rast
Jonathan Nieder
Junio C Hamano
Ævar Arnfjörð Bjarmason
David D. Kilzer
Johannes Sixt
Brandon Casey
Jens Lehmann
Jay Soffian
Will Palmer
Michael J Gruber
Nazri Ramliy