| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After we copy the templates into place, we re-read the
config in case we copied in a default config file. But since
git_config() is backed by a cache these days, it's possible
that the call will not actually touch the filesystem at all;
we need to tell it that something has changed behind the
scenes.
Note that we also need to reset the shared_repository
config. At first glance, it seems like this should probably
just be folded into git_config_clear(). But unfortunately
that is not quite right. The shared repository value may
come from config, _or_ it may have been set manually. So
only the caller who knows whether or not they set it is the
one who can clear it (and indeed, if you _do_ put it into
git_config_clear(), then many tests fail, as we have to
clear the config cache any time we set a new config
variable).
There are three tests here. The first two actually pass
already, though it's largely luck: they just don't happen to
actually read any config before we enter the new repo.
But the third one does fail without this patch; we look at
core.sharedrepository while creating the directory, but need
to make sure the value from the template config overrides
it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git_config() runs, it looks in the system, user-wide,
and repo-level config files. It gets the latter by calling
git_pathdup(), which in turn calls get_git_dir(). If we
haven't set up the git repository yet, this may simply
return ".git", and we will look at ".git/config". This
seems like it would be helpful (presumably we haven't set up
the repository yet, so it tries to find it), but it turns
out to be a bad idea for a few reasons:
- it's not sufficient, and therefore hides bugs in a
confusing way. Config will be respected if commands are
run from the top-level of the working tree, but not from
a subdirectory.
- it's not always true that we haven't set up the
repository _yet_; we may not want to do it at all. For
instance, if you run "git init /some/path" from inside
another repository, it should not load config from the
existing repository.
- there might be a path ".git/config", but it is not the
actual repository we would find via setup_git_directory().
This may happen, e.g., if you are storing a git
repository inside another git repository, but have
munged one of the files in such a way that the
inner repository is not valid (e.g., by removing HEAD).
We have at least two bugs of the second type in git-init,
introduced by ae5f677 (lazily load core.sharedrepository,
2016-03-11). It causes init to use git_configset(), which
loads all of the config, including values from the current
repo (if any). This shows up in two ways:
1. If we happen to be in an existing repository directory,
we'll read and respect core.sharedrepository from it,
even though it should have no bearing on the new
repository. A new test in t1301 covers this.
2. Similarly, if we're in an existing repo that sets
core.logallrefupdates, that will cause init to fail to
set it in a newly created repository (because it thinks
that the user's templates already did so). A new test
in t0001 covers this.
We also need to adjust an existing test in t1302, which
gives another example of why this patch is an improvement.
That test creates an embedded repository with a bogus
core.repositoryformatversion of "99". It wants to make sure
that we actually stop at the bogus repo rather than
continuing upward to find the outer repo. So it checks that
"git config core.repositoryformatversion" returns 99. But
that only works because we blindly read ".git/config", even
though we _know_ we're in a repository whose vintage we do
not understand.
After this patch, we avoid reading config from the unknown
vintage repository at all, which is a safer choice. But we
need to tweak the test, since core.repositoryformatversion
will not return 99; it will claim that it could not find the
variable at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is shorter, and saves a subshell.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we see an explicit "--no-index", we do not bother calling
setup_git_directory_gently() at all. This means that we may
miss out on reading repo-specific config.
It's arguable whether this is correct or not. If we were
designing from scratch, making "git diff --no-index"
completely ignore the repository makes some sense. But we
are nowhere near scratch, so let's look at the existing
behavior:
1. If you're in the top-level of a repository and run an
explicit "diff --no-index", the config subsystem falls
back to reading ".git/config", and we will respect repo
config.
2. If you're in a subdirectory of a repository, then we
still try to read ".git/config", but it generally
doesn't exist. So "diff --no-index" there does not
respect repo config.
3. If you have $GIT_DIR set in the environment, we read
and respect $GIT_DIR/config,
4. If you run "git diff /tmp/foo /tmp/bar" to get an
implicit no-index, we _do_ run the repository setup,
and set $GIT_DIR (or respect an existing $GIT_DIR
variable). We find the repo config no matter where we
started, and respect it.
So we already respect the repository config in a number of
common cases, and case (2) is the only one that does not.
And at least one of our tests, t4034, depends on case (1)
behaving as it does now (though it is just incidental, not
an explicit test for this behavior).
So let's bring case (2) in line with the others by always
running the repository setup, even with an explicit
"--no-index". We shouldn't need to change anything else, as the
implicit case already handles the prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we see an explicit "git diff --no-index ../foo ../bar",
then we do not set up the git repository at all (we already
know we are in --no-index mode, so do not have to check "are
we in a repository?"), and hence have no "prefix" within the
repository. A patch generated by this command will have the
filenames "a/../foo" and "b/../bar", no matter which
directory we are in with respect to any repository.
However, in the implicit case, where we notice that the
files are outside the repository, we will have chdir()'d to
the top-level of the repository. We then feed the prefix
back to the diff machinery. As a result, running the same
diff from a subdirectory will result in paths that look like
"a/subdir/../../foo".
Besides being unnecessarily long, this may also be confusing
to the user: they don't care about the subdir or the
repository at all; it's just where they happened to be when
running the command. We should treat this the same as the
explicit --no-index case.
One way to address this would be to chdir() back to the
original path before running our diff. However, that's a bit
hacky, as we would also need to adjust $GIT_DIR, which could
be a relative path from our top-level.
Instead, we can reuse the diff machinery's RELATIVE_NAME
option, which automatically strips off the prefix. Note that
this _also_ restricts the diff to this relative prefix, but
that's OK for our purposes: we queue our own diff pairs
manually, and do not rely on that part of the diff code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Patch-id does not require a repository because it is just
processing the incoming diff on stdin, but it may look at
git config for keys like patchid.stable.
Even though we do not setup_git_directory(), this works from
the top-level of a repository because we blindly look at
".git/config" in this case. But as the included test
demonstrates, it does not work from a subdirectory.
We can fix it by using RUN_SETUP_GENTLY. We do not take any
filenames from the user on the command line, so there's no
need to adjust them via prefix_filename().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "hash-object" is run without "-w", we don't need to be
in a git repository at all; we can just hash the object and
write its sha1 to stdout. However, if we _are_ in a git
repository, we would want to know that so we can follow the
normal rules for respecting config, .gitattributes, etc.
This happens to work at the top-level of a git repository
because we blindly read ".git/config", but as the included
test shows, it does not work when you are in a subdirectory.
The solution is to just do a "gentle" setup in this case. We
already take care to use prefix_filename() on any filename
arguments we get (to handle the "-w" case), so we don't need
to do anything extra to handle the side effects of repo
setup.
An alternative would be to specify RUN_SETUP_GENTLY for this
command in git.c, and then die if "-w" is set but we are not
in a repository. However, the error messages generated at
the time of setup_git_directory() are more detailed, so it's
better to find out which mode we are in, and then call the
appropriate function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git difftool" learned to handle unmerged paths correctly in
dir-diff mode.
* da/difftool:
difftool: handle unmerged files in dir-diff mode
difftool: initialize variables for readability
|
|
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
|
|
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
|
|
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
|
|
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
|
|
"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
|
|
"git fsck" learned to catch NUL byte in a commit object as
potential error and warn.
* jc/fsck-nul-in-commit:
fsck: detect and warn a commit with embedded NUL
fsck_commit_buffer(): do not special case the last validation
|
|
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
|
|
Typofixes.
* lp/typofixes:
typofix: assorted typofixes in comments, documentation and messages
|
|
Test fix.
* sb/z-is-gnutar-ism:
t6041: do not compress backup tar file
t3513: do not compress backup tar file
|
|
Mark several messages for translation.
* va/i18n-misc-updates:
i18n: unpack-trees: avoid substituting only a verb in sentences
i18n: builtin/pull.c: split strings marked for translation
i18n: builtin/pull.c: mark placeholders for translation
i18n: git-parse-remote.sh: mark strings for translation
i18n: branch: move comment for translators
i18n: branch: unmark string for translation
i18n: builtin/rm.c: remove a comma ',' from string
i18n: unpack-trees: mark strings for translation
i18n: builtin/branch.c: mark option for translation
i18n: index-pack: use plural string instead of normal one
|
|
Test fix.
* ak/t4151-ls-files-could-be-empty:
t4151: make sure argument to 'test -z' is given
|
|
Test fix.
* jc/test-seq:
test-lib-functions.sh: rewrite test_seq without Perl
test-lib-functions.sh: remove misleading comment on test_seq
|
|
Test fix.
* tb/t5601-sed-fix:
t5601: Remove trailing space in sed expression
|
|
* sb/clean-test-fix:
t7300: mark test with SANITY
|
|
Code cleanup.
* sg/test-lib-simplify-expr-away:
test-lib: simplify '--option=value' parsing
|
|
* js/close-packs-before-gc:
t5510: run auto-gc in the foreground
|
|
Recent update to Git LFS broke "git p4" by changing the output from
its "lfs pointer" subcommand.
* ls/p4-lfs:
git-p4: fix Git LFS pointer parsing
travis-ci: express Linux/OS X dependency versions more clearly
travis-ci: update Git-LFS and P4 to the latest version
|
|
Fix a broken test.
* ls/p4-lfs-test-fix-2.7.0:
t9824: fix wrong reference value
t9824: fix broken &&-chain in a subshell
|
|
UI consistency improvements.
* nf/mergetool-prompt:
difftool/mergetool: make the form of yes/no questions consistent
|
|
Some Windows SDK lacks pthread_sigmask() implementation and fails
to compile the recently updated "git push" codepath that uses it.
* jk/push-client-deadlock-fix:
Windows: only add a no-op pthread_sigmask() when needed
Windows: add pthread_sigmask() that does nothing
t5504: drop sigpipe=ok from push tests
fetch-pack: isolate sigpipe in demuxer thread
send-pack: isolate sigpipe in demuxer thread
run-command: teach async threads to ignore SIGPIPE
send-pack: close demux pipe before finishing async process
|
|
"git mv old new" did not adjust the path for a submodule that lives
as a subdirectory inside old/ directory correctly.
* sb/mv-submodule-fix:
mv: allow moving nested submodules
|
|
The test scripts for "git p4" (but not "git p4" implementation
itself) has been updated so that they would work even on a system
where the installed version of Python is python 3.
* ld/p4-test-py3:
git-p4 tests: time_in_seconds should use $PYTHON_PATH
git-p4 tests: work with python3 as well as python2
git-p4 tests: cd to / before running python
|
|
When files are unmerged they can show up as both unmerged and
modified in the output of `git diff --raw`. This causes
difftool's dir-diff to create filesystem entries for the same
path twice, which fails when it encounters a duplicate path.
Ensure that each worktree path is only processed once.
Add a test to demonstrate the breakage.
Reported-by: Jan Smets <jan@smets.cx>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running diff commands, a pathspec containing decomposed
unicode code points is not converted to precomposed unicode form
under Mac OS X, but we normalize the paths in the index and the
history to precomposed form on that platform. As a result, the
pathspec would not match and no diff is shown.
Unlike many builtin commands, the "diff" family of commands do
not use parse_options(), which is how other builtin commands
indirectly call precompose_argv() to normalize argv[] into
precomposed form on Mac OSX. Teach these commands to call
precompose_argv() themselves.
Note that precomopose_argv() normalizes not just paths but all
command line arguments, so things like "git diff -G $string"
when $string has the decomposed form would first be normalized
into the precomposed form and would stop hitting the same string
in the decomposed form in the diff output with this change.
It is not a problem per-se, as "log" family of commands already use
parse_options() and call precompose_argv()--we can think of this
change as making the "diff" family of commands behave in a similar
way as the commands in the "log" family.
Signed-off-by: Alexander Rinass <alex@fournova.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of reusing the same set of message templates for checkout
and other actions and substituting the verb with "%s", prepare
separate message templates for each known action. That would make
it easier for translation into languages where the same verb may
conjugate differently depending on the message we are giving.
See gettext documentation for details:
http://www.gnu.org/software/gettext/manual/html_node/Preparing-Strings.html
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Passing "-x" to a test script enables the shell's "set -x"
tracing, which can help with tracking down the command that
is causing a failure. Unfortunately, it can also _cause_
failures in some tests that redirect the stderr of a shell
function. Inside the function the shell continues to
respect "set -x", and the trace output is collected along
with whatever stderr is generated normally by the function.
You can see an example of this by running:
./t0040-parse-options.sh -x -i
which will fail immediately in the first test, as it
expects:
test_must_fail some-cmd 2>output.err
to leave output.err empty (but with "-x" it has our trace
output).
Unfortunately there isn't a portable or scalable solution to
this. We could teach test_must_fail to disable "set -x", but
that doesn't help any of the other functions or subshells.
However, we can work around it by pointing the "set -x"
output to our descriptor 4, which always points to the
original stderr of the test script. Unfortunately this only
works for bash, but it's better than nothing (and other
shells will just ignore the BASH_XTRACEFD variable).
The patch itself is a simple one-liner, but note the caveats
in the accompanying comments.
Automatic tests for our "-x" option may be a bit too meta
(and a pain, because they are bash-specific), but I did
confirm that it works correctly both with regular "-x" and
with "--verbose-only=1". This works because the latter flips
"set -x" off and on for particular tests (if it didn't, we
would get tracing for all tests, as going to descriptor 4
effectively circumvents the verbose flag).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though a Git commit object is designed to be capable of storing
any binary data as its payload, in practice people use it to describe
the changes in textual form, and tools like "git log" are designed to
treat the payload as text.
Detect and warn when we see any commit object with a NUL byte in
it.
Note that a NUL byte in the header part is already detected as a
grave error. This change is purely about the message part.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the 'seq' imitation using only commands and features that
are typically found built into modern POSIX shells, instead of
relying on Perl to run a single-liner script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
88d50724 (am --skip: revert changes introduced by failed 3way merge,
2015-06-06), unlike all the other patches in the series, forgot to
quote the output from "$(git ls-files -u)" when using it as the
argument to "test -z", leading to a syntax error on platforms whose
test does not interpret "test -z" (no other arguments) as testing if
a string "-z" is the null string (which GNU test and test that is
built into bash and dash seem to do).
Note that $(git ls-files -u | wc -l) is deliberately left unquoted,
as some implementations of "wc -l" includes extra blank characters
in its output and cannot be compared as string, i.e. "test 0 = $(...)".
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We never used the "letters" form since we came up with "test_seq" to
replace use of non-portable "seq" in our test script, which we
introduced it at d17cf5f3 (tests: Introduce test_seq, 2012-08-04).
We use this helper to either iterate for N times (i.e. the values on
the lines do not even matter), or just to get N distinct strings
(i.e. the values on the lines themselves do not really matter, but
we care that they are different from each other and reproducible).
Stop promising that we may allow using "letters"; this would open an
easier reimplementation that does not rely on $PERL, if somebody
later wants to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test uses the 'z' option, i.e. "compress the output while at
it", which is GNUism and not portable.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test uses the 'z' option, i.e. "compress the output while at
it", which is GNUism and not portable.
Reported-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sed expression for IPv6, "Tested User And Host" or "tuah" used a wrong
sed expression, which doesn't work under all versions of sed.
Reported-By: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
* sb/submodule-path-misc-bugs:
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
|
|
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The discussion in [1] pointed out that '.' is a faulty suggestion as
there is a corner case where it fails:
> "submodule deinit ." may have "worked" in the sense that you would
> have at least one path in your tree and avoided this "nothing
> matches" most of the time. It would have still failed with the
> exactly same error if run in an empty repository, i.e.
>
> $ E=/var/tmp/x/empty && rm -fr "$E" && mkdir -p "$E" && cd "$E"
> $ git init
> $ rungit v2.6.6 submodule deinit .
> error: pathspec '.' did not match any file(s) known to git.
> Did you forget to 'git add'?
> $ >file && git add file
> $ rungit v2.6.6 submodule deinit .
> $ echo $?
> 0
So instead of a pathspec add the '--all' option to deinit all submodules
and add a test to check for the corner case of an empty repository.
The code only needs to learn about the '--all' option and doesn't
require further changes as `git submodule--helper list "$@"` will list
all submodules when "$@" is empty.
[1] http://news.gmane.org/gmane.comp.version-control.git/289535
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test runs `chmod 0` on a file to test a case where Git fails to
read it, but that would not work if it is run as root.
Reported-by: Jan Keromnes <janx@linux.com>
Fix-proposed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/use-write-script-more:
t3404: use write_script
t1020: do not overuse printf and use write_script
t5532: use write_script
|
|
"git commit" misbehaved in a few minor ways when an empty message
is given via -m '', all of which has been corrected.
* ad/commit-have-m-option:
commit: do not ignore an empty message given by -m ''
commit: --amend -m '' silently fails to wipe message
|
|
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
|
|
A change back in version 2.7 to "git branch" broke display of a
symbolic ref in a non-standard place in the refs/ hierarchy (we
expect symbolic refs to appear in refs/remotes/*/HEAD to point at
the primary branch the remote has, and as .git/HEAD to point at the
branch we locally checked out).
* jk/branch-shortening-funny-symrefs:
branch: fix shortening of non-remote symrefs
|
Jeff King
Junio C Hamano
David Aguilar
Alexander Rinass
Vasco Almeida
Johannes Schindelin
Armin Kunaschik
Stefan Beller
Torsten Bögershausen
Li Peng