| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Even if a directory doesn't match a pathspec, it is possible, depending
on the precise pathspecs, that some file underneath it might. So we
special case and recurse into the directory for such situations. However,
we previously always added any untracked directory that we recursed into
to the list of untracked paths, regardless of whether the directory
itself matched the pathspec.
For the case of git-clean and a set of pathspecs of "dir/file" and "more",
this caused a problem because we'd end up with dir entries for both of
"dir"
"dir/file"
Then correct_untracked_entries() would try to helpfully prune duplicates
for us by removing "dir/file" since it's under "dir", leaving us with
"dir"
Since the original pathspec only had "dir/file", the only entry left
doesn't match and leaves nothing to be removed. (Note that if only one
pathspec was specified, e.g. only "dir/file", then the common_prefix_len
optimizations in fill_directory would cause us to bypass this problem,
making it appear in simple tests that we could correctly remove manually
specified pathspecs.)
Fix this by actually checking whether the directory we are about to add
to the list of dir entries actually matches the pathspec; only do this
matching check after we have already returned from recursing into the
directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Someone brought me a testcase where multiple git-clean invocations were
required to clean out unwanted files:
mkdir d{1,2}
touch d{1,2}/ut
touch d1/t && git add d1/t
With this setup, the user would need to run
git clean -ffd */ut
twice to delete both ut files.
A little testing showed some interesting variants:
* If only one of those two ut files existed (either one), then only one
clean command would be necessary.
* If both directories had tracked files, then only one git clean would
be necessary to clean both files.
* If both directories had no tracked files then the clean command above
would never clean either of the untracked files despite the pathspec
explicitly calling both of them out.
A bisect showed that the failure to clean out the files started with
commit cf424f5fd89b ("clean: respect pathspecs with "-d", 2014-03-10).
However, that pointed to a separate issue: while the "-d" flag was used
by the original user who showed me this problem, that flag should have
been irrelevant to this problem. Testing again without the "-d" flag
showed that the same buggy behavior exists without using that flag, and
has in fact existed since before cf424f5fd89b.
Although these problems at first are perceived to be different (e.g.
never clearing out the requested files vs. taking multiple invocations
to get everything cleared out), they are actually just different
manifestations of the same problem. The case with multiple directories
that have no tracked files is the more general case; solving it will
solve all the others. So, I concentrate on it. Add testcases showing
that multiple untracked files within entirely untracked directories
cannot be cleaned when specifying these files to git clean via
pathspecs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git clean -fd' must not delete an untracked directory if it belongs
to a different Git repository or worktree. Unfortunately, if a
'.gitignore' rule in the outer repository happens to match a file in a
nested repository or worktree, then something goes awry and 'git clean
-fd' does delete the content of the nested repository's worktree
except that ignored file, potentially leading to data loss.
Add a test to 't7300-clean.sh' to demonstrate this breakage.
This issue is a regression introduced in 6b1db43109 (clean: teach
clean -d to preserve ignored paths, 2017-05-23).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
|
|
Code restructuring during 2.20 period broke fetching tags via
"import" based transports.
* fc/fetch-with-import-fix:
fetch: fix regression with transport helpers
fetch: make the code more understandable
fetch: trivial cleanup
t5801 (remote-helpers): add test to fetch tags
t5801 (remote-helpers): cleanup refspec stuff
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
|
|
"git checkout -p" needs to selectively apply a patch in reverse,
which did not work well.
* pw/add-p-recount:
add -p: fix checkout -p with pathological context
|
|
"git interpret-trailers" always treated '#' as the comment
character, regardless of core.commentChar setting, which has been
corrected.
* jk/trailers-use-config:
interpret-trailers: load default config
|
|
"git stash show 23" used to work, but no more after getting
rewritten in C; this regression has been corrected.
* tg/stash-ref-by-index-fix:
stash: fix show referencing stash index
|
|
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
|
|
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
|
|
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
|
|
The configuration variable rebase.rescheduleFailedExec should be
effective only while running an interactive rebase and should not
affect anything when running an non-interactive one, which was not
the case. This has been corrected.
* js/rebase-reschedule-applies-only-to-interactive:
rebase --am: ignore rebase.rescheduleFailedExec
|
|
"git rm" to resolve a conflicted path leaked an internal message
"needs merge" before actually removing the path, which was
confusing. This has been corrected.
* jc/denoise-rm-to-resolve:
rm: resolving by removal is not a warning-worthy event
|
|
Window 7 update ;-)
* js/mingw-spawn-with-spaces-in-path:
mingw: support spawning programs containing spaces in their names
|
|
"git clean" silently skipped a path when it cannot lstat() it; now
it gives a warning.
* js/clean-report-too-long-a-path:
clean: show an error message when the path is too long
|
|
"git push --atomic" that goes over the transport-helper (namely,
the smart http transport) failed to prevent refs to be pushed when
it can locally tell that one of the ref update will fail without
having to consult the other end, which has been corrected.
* es/local-atomic-push-failure-with-http:
transport-helper: avoid var decl in for () loop control
transport-helper: enforce atomic in push_refs_with_push
|
|
Typofix.
* js/t3404-typofix:
t3404: fix a typo
|
|
Test update.
* js/t0001-case-insensitive:
t0001: fix on case-insensitive filesystems
|
|
Test update.
* sg/t5551-fetch-smart-error-is-translated:
t5551: use 'test_i18ngrep' to check translated output
|
|
Update smart-http test.
* jt/t5551-test-chunked:
t5551: test usage of chunked encoding explicitly
|
|
"git p4" update.
* sw/git-p4-unshelve-branched-files:
git-p4: allow unshelving of branched files
|
|
"git fetch" into a lazy clone forgot to fetch base objects that are
necessary to complete delta in a thin packfile, which has been
corrected.
* jt/partial-clone-missing-ref-delta-base:
t5616: cover case of client having delta base
t5616: use correct flag to check object is missing
index-pack: prefetch missing REF_DELTA bases
t5616: refactor packfile replacement
|
|
When creating a partial clone, the object filtering criteria is
recorded for the origin of the clone, but this incorrectly used a
hardcoded name "origin" to name that remote; it has been corrected
to honor the "--origin <name>" option.
* xl/record-partial-clone-origin:
clone: respect user supplied origin name when setting up partial clone
|
|
"git request-pull" learned to warn when the ref we ask them to pull
from in the local repository and in the published repository are
different.
* pb/request-pull-verify-remote-ref:
request-pull: warn if the remote object is not the same as the local one
request-pull: quote regex metacharacters in local ref
|
|
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
|
|
"git bundle verify" needs to see if prerequisite objects exist in
the receiving repository, but the command did not check if we are
in a repository upfront, which has been corrected.
* js/bundle-verify-require-object-store:
bundle verify: error out if called without an object database
|
|
"git am -i --resolved" segfaulted after trying to see a commit as
if it were a tree, which has been corrected.
* jk/am-i-resolved-fix:
am: fix --interactive HEAD tree resolution
am: drop tty requirement for --interactive
am: read interactive input from stdin
am: simplify prompt response handling
|
|
The server side support for "git fetch" used to show incorrect
value for the HEAD symbolic ref when the namespace feature is in
use, which has been corrected.
* jk/HEAD-symref-in-xfer-namespaces:
upload-pack: strip namespace from symref data
|
|
"git update-server-info" used to leave stale packfiles in its
output, which has been corrected.
* ew/server-info-remove-crufts:
server-info: do not list unlinked packs
|
|
"git worktree add" used to fail when another worktree connected to
the same repository was corrupt, which has been corrected.
* nd/corrupt-worktrees:
worktree add: be tolerant of corrupt worktrees
|
|
A relative pathname given to "git init --template=<path> <repo>"
ought to be relative to the directory "git init" gets invoked in,
but it instead was made relative to the repository, which has been
corrected.
* nd/init-relative-template-fix:
init: make --template path relative to $CWD
|
|
After finding a function line for --function-context in the pre-image,
xdl_emit_diff() calculates the equivalent line in the post-image. It
assumes that the lines between changes are the same on both sides. If
the option --ignore-blank-lines was also given then this is not
necessarily true.
Clamp the calculation results for start and end of the function context
to prevent out-of-bounds array accesses.
Note that this _just_ fixes the case where our mismatch sends us off the
beginning of the file. There are likely other cases where our assumption
causes us to go to the wrong line within the file. Nobody has developed
a test case yet, and the ultimate fix is likely more complicated than
this patch. But this at least prevents a segfault in the meantime.
Credit for finding the bug goes to "Liu Wei of Tencent Security Xuanwu
Lab".
Reported-by: 刘炜 <lw17qhdz@gmail.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `lstat()` failed, `git clean` would abort without an error
message, leaving the user quite puzzled.
In particular on Windows, where the default maximum path length is
quite small (yet there are ways to circumvent that limit in many
cases), it is very important that users be given an indication why
their command failed because of too long paths when it did.
This test case makes sure that a warning is issued that would have
helped the user who reported this issue:
https://github.com/git-for-windows/git/issues/521
Note that we temporarily set `core.longpaths = false` in the regression
test; this ensures forward-compatibility with the `core.longpaths`
feature that has not yet been upstreamed from Git for Windows.
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When resolving a conflict on a path in favor of removing it, using
"git rm" on it is the standard way to do so. The user however is
greeted with a "needs merge" message during that operation:
$ git merge side-branch
$ edit conflicted-path-1
$ git add conflicted-path-1
$ git rm conflicted-path-2
conflicted-path-2: needs merge
rm 'conflicted-path-2'
The removal by "git rm" does get performed, but an uninitiated user
may find it confusing, "needs merge? so I need to resolve conflict
before being able to remove it???"
The message is coming from "update-index --refresh" that is called
internally to make sure "git rm" knows which paths are clean and
which paths are dirty, in order to prevent removal of paths modified
relative to the index without the "-f" option. We somehow ended up
not squelching this message which seeped through to the UI surface.
Use the same mechanism used by "git commit", "git describe", etc. to
squelch the message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On some older Windows versions (e.g. Windows 7), the CreateProcessW()
function does not really support spaces in its first argument,
lpApplicationName. But it supports passing NULL as lpApplicationName,
which makes it figure out the application from the (possibly quoted)
first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
We will abuse the test-fake-ssh.exe helper to verify that this works and
does not regress.
This fixes https://github.com/git-for-windows/git/issues/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach transport-helper how to notice if skipping a ref during push would
violate atomicity on the client side. We notice that a ref would be
rejected, and choose not to send it, but don't notice that if the client
has asked for --atomic we are violating atomicity if all the other
pushes we are sending would succeed. Asking the server end to uphold
atomicity wouldn't work here as the server doesn't have any idea that we
tried to update a ref that's broken.
The added test-case is a succinct way to reproduce this issue that fails
today. The same steps work fine when we aren't using a transport-helper
to get to the upstream, i.e. when we've added a local repository as a
remote:
git remote add ~/upstream upstream
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `exec` command is specific to the interactive backend, therefore it
does not make sense for non-interactive rebases to heed that config
setting.
We still want to error out if a non-interactive rebase is started with
`--reschedule-failed-exec`, of course.
Reported by Vas Sudanagunta via:
https://github.com/git/git/commit/969de3ff0e0#commitcomment-33257187
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make sure that the previously displayed progress line is completely
covered up when the new line is shorter, commit 545dc345eb (progress:
break too long progress bar lines, 2019-04-12) added a bunch of
calculations to figure out how many characters it needs to overwrite
with spaces.
Use the just introduced term_clear_line() helper function to, well,
clear the last line, making all these calculations unnecessary, and
thus simplifying the code considerably.
Three tests in 't5541-http-push-smart.sh' 'grep' for specific text
shown in the progress lines at the beginning of the line, but now
those lines begin either with the ANSI escape sequence or with the
terminal width worth of space characters clearing the line. Relax the
'grep' patterns to match anywhere on the line. Note that only two of
these three tests fail without relaxing their 'grep' pattern, but the
third looks for the absence of the pattern, so it still succeeds, but
without the adjustment would potentially hide future regressions.
Note also that with this change we no longer need the length of the
previously displayed progress line, so the strbuf added to 'struct
progress' in d53ba841d4 (progress: assemble percentage and counters in
a strbuf before printing, 2019-04-05) is not strictly necessary
anymore. We still keep it, though, as it avoids allocating and
releasing a strbuf each time the progress is updated.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
$ git rebase -x true HEAD~5
Executing: true
Executing: true
Executing: true
Executing: true
Executing: true)
Successfully rebased and updated refs/heads/master.
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When run using GIT_TEST_PROTOCOL_VERSION=2, a test in t5551 fails
because 4 POSTs (probe, ls-refs, probe, fetch) are sent instead of 2
(probe, fetch).
One way to resolve this would be to relax the condition (from "= 2" to
greater than 1, say), but upon further inspection, the test probably
shouldn't be counting the number of POSTs. This test states that large
requests are split across POSTs, but this is not correct; the main
change is that chunked transfer encoding is used, but the request is
still contained within one POST. (The test coincidentally works because
Git indeed sends 2 POSTs in the case of a large request, but that is
because, as stated above, the first POST is a probing RPC - see
post_rpc() in remote-curl.c for more information.)
Therefore, instead of counting POSTs, check that chunked transfer
encoding is used. This also has the desirable side effect of passing
with GIT_TEST_PROTOCOL_VERSION=2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The two tests 'invalid Content-Type rejected' and 'server-side error
detected' in 't5551-http-fetch-smart.sh' use "plain" 'grep' to check
that 'git clone' failed with the expected error message, but the
messages they are checking are translated, and, consequently, these
tests fail when the test script is run with GIT_TEST_GETTEXT_POISON
enabled.
Use 'test_i18ngrep' instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Calling
git submodule foreach --recursive <subcommand> --<option>
leads to an error stating that the option --<option> is unknown to
submodule--helper. That is of course only, when <option> is not a valid
option for git submodule foreach.
The reason for this is, that above call is internally translated into a
call to submodule--helper:
git submodule--helper foreach --recursive \
-- <subcommand> --<option>
This call starts by executing the subcommand with its option inside the
first level submodule and continues by calling the next iteration of
the submodule foreach call
git --super-prefix <submodulepath> submodule--helper \
foreach --recursive <subcommand> --<option>
inside the first level submodule. Note that the double dash in front of
the subcommand is missing.
This problem starts to arise only recently, as the
PARSE_OPT_KEEP_UNKNOWN flag for the argument parsing of git submodule
foreach was removed in commit a282f5a906. Hence, the unknown option is
complained about now, as the argument parsing is not properly ended by
the double dash.
This commit fixes the problem by adding the double dash in front of the
subcommand during the recursion.
Signed-off-by: Morian Sonnet <moriansonnet@googlemail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test 'rebase -i respects rebase.missingCommitsCheck = warn' is
mainly interested in the warning about the dropped commits, but it
checks the whole output of 'git rebase', including progress lines and
what not that are not at all relevant to 'rebase.missingCommitsCheck',
but make it necessary to update this test whenever e.g. the way we
show progress is updated (as it will happen in one of the later
patches of this series).
Modify the test to verify only the first four lines of 'git rebase's
output that contain all the important lines, notably the line
containing the "Warning:" itself and the oneline log of the dropped
commit.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 't3404-rebase-interactive.sh' the expected output of several tests
is prepared from here documents, which are outside of
'test_expect_success' blocks and have spaces around redirection
operators.
Move these here documents into the corresponding 'test_expect_success'
block and avoid spaces between filename and redition operators.
Furthermore, quote the here docs' delimiter word to prevent parameter
expansions and what not, where applicable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On a case-insensitive filesystem, such as HFS+ or NTFS, it is possible
that the idea Bash has of the current directory differs in case from
what Git thinks it is. That's totally okay, though, and we should not
expect otherwise.
On Windows, for example, when you call
cd C:\GIT-SDK-64
in a PowerShell and there exists a directory called `C:\git-sdk-64`, the
current directory will be reported in all upper-case. Even in a Bash
that you might call from that PowerShell. Git, however, will have
normalized this via `GetFinalPathByHandle()`, and the expectation in
t0001 that the recorded gitdir will match what `pwd` says will be
violated.
Let's address this by comparing these paths in a case-insensitive
manner when `core.ignoreCase` is `true`.
Reported by Jameson Miller.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the conversion of 'stash show' to C in dc7bd382b1 ("stash: convert
show to builtin", 2019-02-25), 'git stash show <n>', where n is the
index of a stash got broken, if n is not a file or a valid revision by
itself.
'stash show' accepts any flag 'git diff' accepts for changing the
output format. Internally we use 'setup_revisions()' to parse these
command line flags. Currently we pass the whole argv through to
'setup_revisions()', which includes the stash index.
As the stash index is not a valid revision or a file in the working
tree in most cases however, this 'setup_revisions()' call (and thus
the whole command) ends up failing if we use this form of 'git stash
show'.
Instead of passing the whole argv to 'setup_revisions()', only pass
the flags (and the command name) through, while excluding the stash
reference. The stash reference is parsed (and validated) in
'get_stash_info()' already.
This separate parsing also means that we currently do produce the
correct output if the command succeeds.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interpret-trailers program does not do the usual loading of config
via git_default_config(), and thus does not respect many of the usual
options. In particular, we will not load core.commentChar, even though
the underlying trailer code uses its value.
This can be seen in the accompanying test, where setting
core.commentChar to anything besides "#" results in a failure to treat
the comments correctly.
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This one slipped through the review of a9279c678588 (sequencer: do not
squash 'reword' commits when we hit conflicts, 2018-06-19).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit fecc6f3a68 ("add -p: adjust offsets of subsequent hunks when one is
skipped", 2018-03-01) fixed adding hunks in the correct place when a
previous hunk has been skipped. However it did not address patches that
are applied in reverse. In that case we need to adjust the pre-image
offset so that when apply reverses the patch the post-image offset is
adjusted correctly. We subtract rather than add the delta as the patch
is reversed (the easiest way to think about it is to consider a hunk of
deletions that is skipped - in that case we want to reduce offset so we
need to subtract).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
SZEDER Gábor
Junio C Hamano
Jeff King
Johannes Schindelin
Emily Shaffer
Jonathan Tan
Morian Sonnet
Thomas Gummerer
Phillip Wood