| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"diff-highlight" filter (in contrib/) allows its color output
to be customized via configuration variables.
* jk/colors:
parse_color: drop COLOR_BACKGROUND macro
diff-highlight: allow configurable colors
parse_color: recognize "no$foo" to clear the $foo attribute
parse_color: support 24-bit RGB values
parse_color: refactor color storage
|
|
New tag object format validation added in 2.2 showed garbage
after a tagname it reported in its error message.
* js/fsck-tag-validation:
index-pack: terminate object buffers with NUL
fsck: properly bound "invalid tag name" error message
|
|
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
|
|
* tb/t0027-eol-conversion:
t0027: check the eol conversion warnings
|
|
The code that reads the reflog from the newer to the older entries
did not handle an entry that crosses a boundary of block it uses to
read them correctly.
* jk/for-each-reflog-ent-reverse:
for_each_reflog_ent_reverse: turn leftover check into assertion
for_each_reflog_ent_reverse: fix newlines on block boundaries
|
|
Credential helpers are asked in turn until one of them give
positive response, which is cumbersome to turn off when you need to
run Git in an automated setting. The credential helper interface
learned to allow a helper to say "stop, don't ask other helpers."
Also GIT_TERMINAL_PROMPT environment can be set to false to disable
our built-in prompt mechanism for passwords.
* jk/credential-quit:
prompt: respect GIT_TERMINAL_PROMPT to disable terminal prompts
credential: let helpers tell us to quit
|
|
"git ls-tree" does not support path selection based on negative
pathspecs, but did not error out when negative pathspecs are given.
* nd/ls-tree-pathspec:
t3102: style modernization
t3102: document that ls-tree does not yet support negated pathspec
ls-tree: disable negative pathspec because it's not supported
ls-tree: remove path filtering logic in show_tree
tree.c: update read_tree_recursive callback to pass strbuf as base
|
|
* rj/t0050-passes:
t0050-*.sh: mark the rename (case change) test as passing
|
|
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
|
|
"git send-email" learned "--transfer-encoding" option to force
a non-fault Content-Transfer-Encoding header (e.g. base64).
* pb/send-email-te:
git-send-email: add --transfer-encoding option
git-send-email: delay creation of MIME headers
|
|
"git am" learned "--message-id" option to copy the message ID of
the incoming e-mail to the log message of resulting commit.
* pb/am-message-id-footer:
git-am: add --message-id/--no-message-id
git-mailinfo: add --message-id
|
|
* js/t5000-dont-copy-bin-sh:
t5000 on Windows: do not mistake "sh.exe" as "sh"
|
|
* jc/refer-to-t-readme-from-submitting-patches:
t/README: justify why "! grep foo" is sufficient
SubmittingPatches: refer to t/README for tests
|
|
"git add --ignore-errors ..." did not ignore an error to
give a file that did not exist.
* mg/add-ignore-errors:
add: ignore only ignored files
|
|
"git interpret-trailers" learned to properly handle the
"Conflicts:" block at the end.
* cc/interpret-trailers-more:
trailer: add test with an old style conflict block
trailer: reuse ignore_non_trailer() to ignore conflict lines
commit: make ignore_non_trailer() non static
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
|
|
* maint:
Git 2.2.1
Git 2.1.4
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-2.1:
Git 2.1.4
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-2.0:
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.9:
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.8.5:
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* dotgit-case-maint-1.8.5:
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
Now that the index can block pathnames that can be mistaken
to mean ".git" on NTFS and FAT32, it would be helpful for
fsck to notice such problematic paths. This lets servers
which use receive.fsckObjects block them before the damage
spreads.
Note that the fsck check is always on, even for systems
without core.protectNTFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
NTFS.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on NTFS themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git or git~1, meaning mischief is almost
certainly what the tree author had in mind).
Ideally these would be controlled by a separate
"fsck.protectNTFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the index can block pathnames that case-fold to
".git" on HFS+, it would be helpful for fsck to notice such
problematic paths. This lets servers which use
receive.fsckObjects block them before the damage spreads.
Note that the fsck check is always on, even for systems
without core.protectHFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
HFS+.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on HFS+ themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git with invisible Unicode code-points mixed
in, meaning mischief is almost certainly what the tree
author had in mind).
Ideally these would be controlled by a separate
"fsck.protectHFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We complain about ".git" in a tree because it cannot be
loaded into the index or checked out. Since we now also
reject ".GIT" case-insensitively, fsck should notice the
same, so that errors do not propagate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that fsck notices and complains about confusing
paths in trees. However, there are a few shortcomings:
1. We check only for these paths as file entries, not as
intermediate paths (so ".git" and not ".git/foo").
2. We check "." and ".." together, so it is possible that
we notice only one and not the other.
3. We repeat a lot of boilerplate.
Let's use some loops to be more thorough in our testing, and
still end up with shorter code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We should prevent nonsense paths from entering the index in
the first place, as they can cause confusing results if they
are ever checked out into the working tree. We already do
so, but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
|
|
* jk/colors-fix:
t4026: test "normal" color
config: fix parsing of "git config --get-color some.key -1"
docs: describe ANSI 256-color mode
|
|
Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
|
|
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we detect an invalid tag-name header in a tag object,
like, "tag foo bar\n", we feed the pointer starting at "foo
bar" to a printf "%s" formatter. This shows the name, as we
want, but then it keeps printing the rest of the tag buffer,
rather than stopping at the end of the line.
Our tests did not notice because they look only for the
matching line, but the bug is that we print much more than
we wanted to. So we also adjust the test to be more exact.
Note that when fscking tags with "index-pack --strict", this
is even worse. index-pack does not add a trailing
NUL-terminator after the object, so we may actually read
past the buffer and print uninitialized memory. Running
t5302 with valgrind does notice the bug for that reason.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on the file content, eol parameters and .gitattributes
"git add" may give a warning when the eol of a file will change when
the file is checked out again.
There are 2 different warnings, either "CRLF will be replaced..." or
"LF will be replaced...". Let t0027 check for these warnings by
adding new parameters to create_file_in_repo(), which tells what
warnings are expected.
When a file has eol=lf or eol=crlf in .gitattributes, it is handled
as text and should be normalized. Add tests for these cases that
were not covered.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/config-flip-xbit-back-after-checking:
create_default_files(): don't set u+x bit on $GIT_DIR/config
|
|
A request to store an empty note via "git notes" meant to remove
note from the object but with --allow-empty we will store a (surprise!)
note that is empty. In the longer run, we might want to deprecate
the somewhat unintuitive "emptying means deletion" behaviour.
* jh/empty-notes:
t3301: modernize style
notes: empty notes should be shown by 'git log'
builtin/notes: add --allow-empty, to allow storing empty notes
builtin/notes: split create_note() to clarify add vs. remove logic
builtin/notes: simplify early exit code in add()
builtin/notes: refactor note file path into struct note_data
builtin/notes: improve naming
t3301: verify that 'git notes' removes empty notes by default
builtin/notes: fix premature failure when trying to add the empty blob
|
|
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
|
|
When we read a reflog file in reverse, we read whole chunks
of BUFSIZ bytes, then loop over the buffer, parsing any
lines we find. We find the beginning of each line by looking
for the newline from the previous line. If we don't find
one, we know that we are either at the beginning of
the file, or that we have to read another block.
In the latter case, we stuff away what we have into a
strbuf, read another block, and continue our parse. But we
missed one case here. If we did find a newline, and it is at
the beginning of the block, we must also stuff that newline
into the strbuf, as it belongs to the block we are about to
read.
The minimal fix here would be to add this special case to
the conditional that checks whether we found a newline.
But we can make the flow a little clearer by rearranging a
bit: we first handle lines that we are going to show, and
then at the end of each loop, stuff away any leftovers if
necessary. That lets us fold this special-case in with the
more common "we ended in the middle of a line" case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are trying to fill a credential, we loop over the
set of defined credential-helpers, then fall back to running
askpass, and then finally prompt on the terminal. Helpers
which cannot find a credential are free to tell us nothing,
but they cannot currently ask us to stop prompting.
This patch lets them provide a "quit" attribute, which asks
us to stop the process entirely (avoiding running more
helpers, as well as the askpass/terminal prompt).
This has a few possible uses:
1. A helper which prompts the user itself (e.g., in a
dialog) can provide a "cancel" button to the user to
stop further prompts.
2. Some helpers may know that prompting cannot possibly
work. For example, if their role is to broker a ticket
from an external auth system and that auth system
cannot be contacted, there is no point in continuing
(we need a ticket to authenticate, and the user cannot
provide one by typing it in).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use <<-\END_OF_HERE_DOCUMENT to allow indenting the HERE document to
make it clear where each test begins and ends, and relieve readers
from having to worry about variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ls-tree uses read_tree_recursive() which already does path filtering
using pathspec. No need to filter one more time based on prefix
only. "ls-tree ../somewhere" does not work because of
this. write_name_quotedpfx() can now be retired because nobody else
uses it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit baa37bff ("mv: allow renaming to fix case on case
insensitive filesystems", 08-05-2014), the 'git mv' command has
been able to rename a file, to one which differs only in case,
on a case insensitive filesystem.
This results in the 'rename (case change)' test, which used to fail
prior to this commit, to now (unexpectedly) pass. Mark this test as
passing.
[jc: Ramsay's tests on Cygwin, Eric's on Mac OS X]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The plan for the push.default transition had all along been
to use the "simple" method rather than "upstream" as a
default if the user did not specify their own push.default
value. Commit 11037ee (push: switch default from "matching"
to "simple", 2013-01-04) tried to implement that by moving
PUSH_DEFAULT_UNSPECIFIED in our switch statement to
fall-through to the PUSH_DEFAULT_SIMPLE case.
When the commit that became 11037ee was originally written,
that would have been enough. We would fall through to
calling setup_push_upstream() with the "simple" parameter
set to 1. However, it was delayed for a while until we were
ready to make the transition in Git 2.0.
And in the meantime, commit ed2b182 (push: change `simple`
to accommodate triangular workflows, 2013-06-19) threw a
monkey wrench into the works. That commit drops the "simple"
parameter to setup_push_upstream, and instead checks whether
the global "push_default" is PUSH_DEFAULT_SIMPLE. This is
right when the user has explicitly configured push.default
to simple, but wrong when we are a fall-through for the
"unspecified" case.
We never noticed because our push.default tests do not cover
the case of the variable being totally unset; they only
check the "simple" behavior itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous one tests only the case where a path to be updated by
the push-to-deploy has an incompatible change in the target's
working tree that has already been added to the index, but the
feature itself wants to require the working tree to be a lot cleaner
than what is tested. Add a handful more tests to protect the
feature from future changes that mistakenly (from the viewpoint of
the inventor of the feature) loosens the cleanliness requirement,
namely:
- A change only to the working tree but not to the index is still a
change to be protected;
- An untracked file in the working tree that would be overwritten
by a push-to-deploy needs to be protected;
- A change that happens to make a file identical to what is being
pushed is still a change to be protected (i.e. the feature's
cleanliness requirement is more strict than that of checkout).
Also, test that a stat-only change to the working tree is not a
reason to reject a push-to-deploy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When synchronizing between working directories, it can be handy to update
the current branch via 'push' rather than 'pull', e.g. when pushing a fix
from inside a VM, or when pushing a fix made on a user's machine (where
the developer is not at liberty to install an ssh daemon let alone know
the user's password).
The common workaround – pushing into a temporary branch and then merging
on the other machine – is no longer necessary with this patch.
The new option is:
'updateInstead':
Update the working tree accordingly, but refuse to do so if there
are any uncommitted changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parse the option and pass it directly to git-mailinfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option adds the content of the Message-Id header at the end of the
commit message prepared by git-mailinfo. This is useful in order to
associate commit messages automatically with mailing list discussions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Johannes Schindelin
Jeff King
Michael J Gruber
Torsten Bögershausen
Nguyễn Thái Ngọc Duy
Ramsay Jones
Paolo Bonzini