| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Later patches in this series will modify file collision conflict
handling (e.g. from rename/add and rename/rename(2to1) conflicts) so
that multiply nested conflict markers can arise even before considering
conflicts in the virtual merge base. Including the virtual merge base
will provide a way to get triply (or higher) nested conflict markers.
This new way to get nested conflict markers will force the need for a
more general mechanism to extend the length of conflict markers in order
to differentiate between different nestings.
Along with this change to conflict marker length handling, we want to
make sure that we don't regress handling for other types of conflicts
with nested conflict markers. Add a more involved testcase using
merge.conflictstyle=diff3, where not only does the virtual merge base
contain conflicts, but its virtual merge base does as well (i.e. a case
with triply nested conflict markers). While there are multiple
reasonable ways to handle nested conflict markers in the virtual merge
base for this type of situation, the easiest approach that dovetails
well with the new needs for the file collision conflict handling is to
require that the length of the conflict markers increase with each
subsequent nesting.
Subsequent patches which change the rename/add and rename/rename(2to1)
conflict handling will modify the extra_marker_size flag appropriately
for their new needs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a single file is renamed, it can also be modified, yielding the
possibility of that renamed file having content conflicts. If two
different such files are renamed into the same location, then two-way
merging those files may result in nested conflicts. Add a testcase that
makes sure we get this case correct, and uses different lengths of
conflict markers to differentiate between the different nestings.
Also add another case with an extra (i.e. third) level of conflict
markers due to using merge.conflictstyle=diff3 and the virtual merge
base also having conflicts present.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add testcases dealing with file collisions for the following types of
conflicts:
* add/add
* rename/add
* rename/rename(2to1)
All these conflict types simplify down to two files "colliding"
and should thus be handled similarly. This means that rename/add and
rename/rename(2to1) conflicts need to be modified to behave the same as
add/add conflicts currently do: the colliding files should be two-way
merged (instead of the current behavior of writing the two colliding
files out to separate temporary unique pathnames). Add testcases which
check this; subsequent commits will fix the conflict handling to make
these tests pass.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want to load unmerged entries from HEAD into the index at stage 2 and
from MERGE_HEAD into stage 3. Similarly, folks expect merge conflicts
to look like
<<<<<<<< HEAD
content from our side
========
content from their side
>>>>>>>> MERGE_HEAD
not
<<<<<<<< MERGE_HEAD
content from their side
========
content from our side
>>>>>>>> HEAD
The correct order usually comes naturally and for free, but with renames
we often have data in the form {rename_branch, other_branch}, and
working relative to the rename first (e.g. for rename/add) is more
convenient elsewhere in the code. Address the slight impedance
mismatch by having some functions re-call themselves with flipped
arguments when the branch order is reversed.
Note that setup_rename_conflict_info() has one asymmetry in it, in
setting dst_entry1->processed=0 but not doing similarly for
dst_entry2->processed. When dealing with rename/rename and similar
conflicts, we do not want the processing to happen twice, so the
desire to only set one of the entries to unprocessed is intentional.
So, while this change modifies which branch's entry will be marked as
unprocessed, that dovetails nicely with putting HEAD first so that we
get the index stage entries and conflict markers in the right order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
* ab/fetch-tags-noclobber:
fetch: stop clobbering existing tags without --force
fetch: document local ref updates with/without --force
push doc: correct lies about how push refspecs work
push doc: move mention of "tag <tag>" later in the prose
push doc: remove confusing mention of remote merger
fetch tests: add a test for clobbering tag behavior
push tests: use spaces in interpolated string
push tests: make use of unused $1 in test description
fetch: change "branch" to "reference" in --force -h output
|
|
Fix a bug in which the same path could be registered under multiple
worktree entries if the path was missing (for instance, was removed
manually). Also, as a convenience, expand the number of cases in
which --force is applicable.
* es/worktree-forced-ops-fix:
doc-diff: force worktree add
worktree: delete .git/worktrees if empty after 'remove'
worktree: teach 'remove' to override lock when --force given twice
worktree: teach 'move' to override lock when --force given twice
worktree: teach 'add' to respect --force for registered but missing path
worktree: disallow adding same path multiple times
worktree: prepare for more checks of whether path can become worktree
worktree: generalize delete_git_dir() to reduce code duplication
worktree: move delete_git_dir() earlier in file for upcoming new callers
worktree: don't die() in library function find_worktree()
|
|
Malformed or crafted data in packstream can make our code attempt
to read or write past the allocated buffer and abort, instead of
reporting an error, which has been fixed.
* jk/patch-corrupted-delta-fix:
t5303: use printf to generate delta bases
patch-delta: handle truncated copy parameters
patch-delta: consistently report corruption
patch-delta: fix oob read
t5303: test some corrupt deltas
test-delta: read input into a heap buffer
|
|
We can now optionally run tests with commit-graph enabled.
* ds/commit-graph-tests:
commit-graph: define GIT_TEST_COMMIT_GRAPH
|
|
Hotfix of the base topic.
* jk/pack-objects-with-bitmap-fix:
pack-bitmap: drop "loaded" flag
traverse_bitmap_commit_list(): don't free result
t5310: test delta reuse with bitmaps
bitmap_has_sha1_in_uninteresting(): drop BUG check
|
|
"git mailinfo" used in "git am" learned to make a best-effort
recovery of a patch corrupted by MUA that sends text/plain with
format=flawed option.
* rs/mailinfo-format-flowed:
mailinfo: support format=flowed
|
|
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
|
|
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
|
|
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
|
|
Lift code from GitHub to restrict delta computation so that an
object that exists in one fork is not made into a delta against
another object that does not appear in the same forked repository.
* cc/delta-islands:
pack-objects: move 'layer' into 'struct packing_data'
pack-objects: move tree_depth into 'struct packing_data'
t5320: tests for delta islands
repack: add delta-islands support
pack-objects: add delta-islands support
pack-objects: refactor code into compute_layer_order()
Add delta-islands.{c,h}
|
|
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
|
|
The color output support for recently introduced "range-diff"
command got tweaked a bit.
* sb/range-diff-colors:
range-diff: indent special lines as context
range-diff: make use of different output indicators
diff.c: add --output-indicator-{new, old, context}
diff.c: rewrite emit_line_0 more understandably
diff.c: omit check for line prefix in emit_line_0
diff: use emit_line_0 once per line
diff.c: add set_sign to emit_line_0
diff.c: reorder arguments for emit_line_ws_markup
diff.c: simplify caller of emit_line_0
t3206: add color test for range-diff --dual-color
test_decode_color: understand FAINT and ITALIC
|
|
When creating a thin pack, which allows objects to be made into a
delta against another object that is not in the resulting pack but
is known to be present on the receiving end, the code learned to
take advantage of the reachability bitmap; this allows the server
to send a delta against a base beyond the "boundary" commit.
* jk/pack-delta-reuse-with-bitmap:
pack-objects: reuse on-disk deltas for thin "have" objects
pack-bitmap: save "have" bitmap from walk
t/perf: add perf tests for fetches from a bitmapped server
t/perf: add infrastructure for measuring sizes
t/perf: factor out percent calculations
t/perf: factor boilerplate out of test_perf
|
|
The unpack_trees() API used in checking out a branch and merging
walks one or more trees along with the index. When the cache-tree
in the index tells us that we are walking a tree whose flattened
contents is known (i.e. matches a span in the index), as linearly
scanning a span in the index is much more efficient than having to
open tree objects recursively and listing their entries, the walk
can be optimized, which is done in this topic.
* nd/unpack-trees-with-cache-tree:
Document update for nd/unpack-trees-with-cache-tree
cache-tree: verify valid cache-tree in the test suite
unpack-trees: add missing cache invalidation
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: add performance tracing
trace.h: support nested performance tracing
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
Fixes to "git rerere" corner cases, especially when conflict
markers cannot be parsed in the file.
* tg/rerere:
rerere: recalculate conflict ID when unresolved conflict is committed
rerere: teach rerere to handle nested conflicts
rerere: return strbuf from handle path
rerere: factor out handle_conflict function
rerere: only return whether a path has conflicts or not
rerere: fix crash with files rerere can't handle
rerere: add documentation for conflict normalization
rerere: mark strings for translation
rerere: wrap paths in output in sq
rerere: lowercase error messages
rerere: unify error messages when read_cache fails
|
|
When there are too many packfiles in a repository (which is not
recommended), looking up an object in these would require
consulting many pack .idx files; a new mechanism to have a single
file that consolidates all of these .idx files is introduced.
* ds/multi-pack-index: (32 commits)
pack-objects: consider packs in multi-pack-index
midx: test a few commands that use get_all_packs
treewide: use get_all_packs
packfile: add all_packs list
midx: fix bug that skips midx with alternates
midx: stop reporting garbage
midx: mark bad packed objects
multi-pack-index: store local property
multi-pack-index: provide more helpful usage info
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
...
|
|
"git rev-list --stdin </dev/null" used to be an error; it now shows
no output without an error. "git rev-list --stdin --default HEAD"
still falls back to the given default when nothing is given on the
standard input.
* jk/rev-list-stdin-noop-is-ok:
rev-list: make empty --stdin not an error
|
|
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
checkout: optimize "git checkout -b <new_branch>"
|
|
An attempt to unflake a test a bit.
* sg/t1404-update-ref-test-timeout:
t1404: increase core.packedRefsTimeout to avoid occasional test failure
|
|
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
|
|
Test update.
* mk/http-backend-content-length:
http-backend test: make empty CONTENT_LENGTH test more realistic
|
|
This is a test of smart HTTP, so it should use the smart HTTP endpoints
(e.g. /info/refs?service=git-receive-pack), not dumb HTTP (HEAD).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/submodule-core-worktree-revert:
Revert "Merge branch 'sb/submodule-core-worktree'"
|
|
The earlier attempt barfed when given a CONTENT_LENGTH that is
set to an empty string. RFC 3875 is fairly clear that in this
case we should not read any message body, but we've been reading
through to the EOF in previous versions (which did not even pay
attention to the environment variable), so keep that behaviour for
now in this late update.
* mk/http-backend-content-length:
http-backend: allow empty CONTENT_LENGTH
|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.
However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.
Add a test for the case.
Reported-By: Jelmer Vernooij <jelmer@jelmer.uk>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test linter code has learned that the end of here-doc mark
"EOF" can be quoted in a double-quote pair, not just in a
single-quote pair.
* es/chain-lint-more:
chainlint: match "quoted" here-doc tags
|
|
Portability fix.
* ab/portable-more:
tests: fix non-portable iconv invocation
tests: fix non-portable "${var:-"str"}" construct
tests: fix and add lint for non-portable grep --file
tests: fix version-specific portability issue in Perl JSON
tests: use shorter labels in chainlint.sed for AIX sed
tests: fix comment syntax in chainlint.sed for AIX sed
tests: fix and add lint for non-portable seq
tests: fix and add lint for non-portable head -c N
|
|
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
|
|
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
|
|
Commit 6a1e32d532 (pack-objects: reuse on-disk deltas for
thin "have" objects, 2018-08-21) taught pack-objects a new
optimization trick. Since this wasn't meant to change
user-visible behavior, but only produce smaller packs more
quickly, testing focused on t/perf/p5311.
However, since people don't run perf tests very often, we
should make sure that the feature is exercised in the
regular test suite. This patch does so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change "fetch" to treat "+" in refspecs (aka --force) to mean we
should clobber a local tag of the same name.
This changes the long-standing behavior of "fetch" added in
853a3697dc ("[PATCH] Multi-head fetch.", 2005-08-20). Before this
change, all tag fetches effectively had --force enabled. See the
git-fetch-script code in fast_forward_local() with the comment:
> Tags need not be pointing at commits so there is no way to
> guarantee "fast-forward" anyway.
That commit and the rest of the history of "fetch" shows that the
"+" (--force) part of refpecs was only conceived for branch updates,
while tags have accepted any changes from upstream unconditionally and
clobbered the local tag object. Changing this behavior has been
discussed as early as 2011[1].
The current behavior doesn't make sense to me, it easily results in
local tags accidentally being clobbered. We could namespace our tags
per-remote and not locally populate refs/tags/*, but as with my
97716d217c ("fetch: add a --prune-tags option and fetch.pruneTags
config", 2018-02-09) it's easier to work around the current
implementation than to fix the root cause.
So this change implements suggestion #1 from Jeff's 2011 E-Mail[1],
"fetch" now only clobbers the tag if either "+" is provided as part of
the refspec, or if "--force" is provided on the command-line.
This also makes it nicely symmetrical with how "tag" itself works when
creating tags. I.e. we refuse to clobber any existing tags unless
"--force" is supplied. Now we can refuse all such clobbering, whether
it would happen by clobbering a local tag with "tag", or by fetching
it from the remote with "fetch".
Ref updates outside refs/{tags,heads/* are still still not symmetrical
with how "git push" works, as discussed in the recently changed
pull-fetch-param.txt documentation. This change brings the two
divergent behaviors more into line with one another. I don't think
there's any reason "fetch" couldn't fully converge with the behavior
used by "push", but that's a topic for another change.
One of the tests added in 31b808a032 ("clone --single: limit the fetch
refspec to fetched branch", 2012-09-20) is being changed to use
--force where a clone would clobber a tag. This changes nothing about
the existing behavior of the test.
1. https://public-inbox.org/git/20111123221658.GA22313@sigill.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test suite only incidentally (and unintentionally) tested for the
current behavior of eager tag clobbering on "fetch". This is a
followup to 380efb65df ("push tests: assert re-pushing annotated
tags", 2018-07-31) which tests for it explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The quoted -m'msg' option would mean the same as -mmsg when passed
through the test_force_push_tag helper. Let's instead use a string
with spaces in it, to have a working example in case we need to pass
other whitespace-delimited arguments to git-tag.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix up a logic error in 380efb65df ("push tests: assert re-pushing
annotated tags", 2018-07-31), where the $tag_type_description variable
was assigned to but never used, unlike in the subsequently added
companion test for fetches in 2d216a7ef6 ("fetch tests: add a test for
clobbering tag behavior", 2018-04-29).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The exact byte count of the delta base file is important.
The test-delta helper will feed it to patch_delta(), which
will barf if it doesn't match the size byte given in the
delta. Using "echo" may end up with unexpected line endings
on some platforms (e.g,. "\r\n" instead of just "\n").
This actually wouldn't cause the test to fail (since we
already expect test-delta to complain about these bogus
deltas), but would mean that we're not exercising the code
we think we are.
Let's use printf instead (which we already trust to give us
byte-perfect output when we generate the deltas).
While we're here, let's tighten the 5-byte result size used
in the "truncated copy parameters" test. This just needs to
have enough room to attempt to parse the bogus copy command,
meaning 2 is sufficient. Using 5 was arbitrary and just
copied from the base size; since those no longer match, it's
simply confusing. Let's use a more meaningful number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we see a delta command instructing us to copy bytes
from the base, we have to read the offset and size from the
delta stream. We do this without checking whether we're at
the end of the stream, meaning we may read past the end of
the buffer.
In practice this isn't exploitable in any interesting way
because:
1. Deltas are always in packfiles, so we have at least a
20-byte trailer that we'll end up reading.
2. The worst case is that we try to perform a nonsense
copy from the base object into the result, based on
whatever was in the pack stream next. In most cases
this will simply fail due to our bounds-checks against
the base or the result.
But even if you carefully constructed a pack stream for
which it succeeds, it wouldn't perform any delta
operation that you couldn't have simply included in a
non-broken form.
But obviously it's poor form to read past the end of the
buffer we've been given. Unfortunately there's no easy way
to do a single length check, since the number of bytes we
need depends on the number of bits set in the initial
command byte. So we'll just check each byte as we parse. We
can hide the complexity in a macro; it's ugly, but not as
ugly as writing out each individual conditional.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying a delta, if we see an opcode that cannot be
fulfilled (e.g., asking to write more bytes than the
destination has left), we break out of our parsing loop but
don't signal an explicit error. We rely on the sanity check
after the loop to see if we have leftover delta bytes or
didn't fill our result buffer.
This can silently ignore corruption when the delta buffer
ends with a bogus command and the destination buffer is
already full. Instead, let's jump into the error handler
directly when we see this case.
Note that the tests also cover the "bad opcode" case, which
already handles this correctly.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `cmd` is in the range [0x01,0x7f] and `cmd > top-data`, the
`memcpy(out, data, cmd)` can copy out-of-bounds data from after `delta_buf`
into `dst_buf`.
This is not an exploitable bug because triggering the bug increments the
`data` pointer beyond `top`, causing the `data != top` sanity check after
the loop to trigger and discard the destination buffer - which means that
the result of the out-of-bounds read is never used for anything.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't have any tests that specifically check boundary
cases in patch_delta(). It obviously gets exercised by tests
which read from packfiles, but it's hard to create packfiles
with bogus deltas.
So let's cover some obvious boundary cases:
1. commands that overflow the result buffer
a. literal content from the delta
b. copies from a base
2. commands where the source isn't large enough
a. literal content from a truncated delta
b. copies that need more bytes than the base has
3. copy commands who parameters are truncated
And indeed, we have problems with both 2a and 3. I've marked
these both as expect_failure, though note that because they
involve reading past the end of a buffer, they will
typically only be caught when run under valgrind or ASan.
There's one more test here, too, which just applies a basic
delta. Since all of the other tests expect failure and we
don't otherwise use "test-tool delta" in the test suite,
this gives a sanity check that the tool works at all.
These are based on an earlier patch by Jann Horn
<jannh@google.com>.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently read the input to test-delta by mmap()-ing it.
However, memory-checking tools like valgrind and ASan are
less able to detect reads/writes past the end of an mmap'd
buffer, because the OS is likely to give us extra bytes to
pad out the final page size. So instead, let's read into a
heap buffer.
As a bonus, this also makes it possible to write tests with
empty bases, as mmap() will complain about a zero-length
map.
This is based on a patch by Jann Horn <jannh@google.com>
which actually aligned the data at the end of a page, and
followed it with another page marked with mprotect(). That
would detect problems even without a tool like ASan, but it
was significantly more complex and may have introduced
portability problems. By comparison, this approach pushes
the complexity onto existing memory-checking tools.
Note that this could be done even more simply by using
strbuf_read_file(), but that would defeat the purpose:
strbufs generally overallocate (and at the very least
include a trailing NUL which we do not care about), which
would defeat most memory checkers.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For cleanliness, "git worktree prune" deletes the .git/worktrees
directory if it is empty after pruning is complete.
For consistency, make "git worktree remove <path>" likewise delete
.git/worktrees if it is empty after the removal.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For consistency with "add -f -f" and "move -f -f" which override
the lock on a worktree, allow "remove -f -f" to do so, as well, as a
convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For consistency with "add -f -f", which allows a missing but locked
worktree path to be re-used, allow "move -f -f" to override a lock,
as well, as a convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For safety, "git worktree add <path>" will refuse to add a new
worktree at <path> if <path> is already associated with a worktree
entry, even if <path> is missing (for instance, has been deleted or
resides on non-mounted removable media or network share). The typical
way to re-create a worktree at <path> in such a situation is either to
prune all "broken" entries ("git worktree prune") or to selectively
remove the worktree entry manually ("git worktree remove <path>").
However, neither of these approaches ("prune" nor "remove") is
especially convenient, and they may be unsuitable for scripting when a
tool merely wants to re-use a worktree if it exists or create it from
scratch if it doesn't (much as a tool might use "mkdir -p" to re-use
or create a directory).
Therefore, teach 'add' to respect --force as a convenient way to
re-use a path already associated with a worktree entry if the path is
non-existent. For a locked worktree, require --force to be specified
twice.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Junio C Hamano
Max Kirillov
Jonathan Nieder
Jeff King
Ævar Arnfjörð Bjarmason
Jann Horn
Eric Sunshine