| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The get_merge_bases_many method returns a list of merge bases for a
single commit (A) against a list of commits (X). Some care is needed in
constructing the expected behavior because the result is not the
expected merge-base for an octopus merge with those parents but instead
the set of maximal commits that are reachable from A and at least one of
the commits in X.
Add get_merge_bases_many to 'test-tool reach' and create a test that
demonstrates that this output returns multiple results. Specifically, we
select a list of three commits such that we output two commits that are
reachable from one of the first two, respectively, and none are
reachable from the third.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The is_descendant_of method takes a single commit as its first parameter
and a list of commits as its second parameter. Extend the input of the
'test-tool reach' command to take multiple lines of the form
"X:<committish>" to construct a list of commits. Pass these to
is_descendant_of and create tests that check each result.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we prepare to change the behavior of the algorithms in
commit-reach.c, create a new test-tool subcommand 'reach' to test these
methods on interesting commit-graph shapes.
To use the new test-tool, use 'test-tool reach <method>' and provide
input to stdin that describes the inputs to the method. Currently, we
only implement the ref_newer method, which requires two commits. Use
lines "A:<committish>" and "B:<committish>" for the two inputs. We will
expand this input later to accommodate methods that take lists of
commits.
The test t6600-test-reach.sh creates a repo whose commits form a
two-dimensional grid. This grid makes it easy for us to determine
reachability because commit-A-B can reach commit-X-Y if and only if A is
at least X and B is at least Y. This helps create interesting test cases
for each result of the methods in commit-reach.c.
We test all methods in three different states of the commit-graph file:
Non-existent (no generation numbers), fully computed, and mixed (some
commits have generation numbers and others do not).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/commit-graph-fsck: (23 commits)
coccinelle: update commit.cocci
commit-graph: update design document
gc: automatically write commit-graph files
commit-graph: add '--reachable' option
commit-graph: use string-list API for input
fsck: verify commit-graph
commit-graph: verify contents match checksum
commit-graph: test for corrupted octopus edge
commit-graph: verify commit date
commit-graph: verify generation number
commit-graph: verify parent list
commit-graph: verify root tree OIDs
commit-graph: verify objects exist
commit-graph: verify corrupt OID fanout and lookup
commit-graph: verify required chunks are present
commit-graph: verify catches corrupt signature
commit-graph: add 'verify' subcommand
commit-graph: load a root tree from specific graph
commit: force commit to parse from object database
commit-graph: parse commit from chosen graph
...
|
|
The code to try seeing if a fetch is necessary in a submodule
during a fetch with --recurse-submodules got confused when the path
to the submodule was changed in the range of commits in the
superproject, sometimes showing "(null)". This has been corrected.
* sb/fix-fetching-moved-submodules:
t5526: test recursive submodules when fetching moved submodules
submodule: fix NULL correctness in renamed broken submodules
|
|
test cleanup.
* jc/clean-after-sanity-tests:
tests: clean after SANITY tests
|
|
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
|
|
When user edits the patch in "git add -p" and the user's editor is
set to strip trailing whitespaces indiscriminately, an empty line
that is unchanged in the patch would become completely empty
(instead of a line with a sole SP on it). The code introduced in
Git 2.17 timeframe failed to parse such a patch, but now it learned
to notice the situation and cope with it.
* pw/add-p-recount:
add -p: fix counting empty context lines in edited patches
|
|
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
|
|
The recent addition of "partial clone" experimental feature kicked
in when it shouldn't, namely, when there is no partial-clone filter
defined even if extensions.partialclone is set.
* jh/partial-clone:
list-objects: check if filter is NULL before using
|
|
Some flaky tests have been fixed.
* sg/gpg-tests-fix:
tests: make forging GPG signed commits and tags more robust
t7510-signed-commit: use 'test_must_fail'
|
|
Fix for 2.17-era regression around `core.safecrlf`.
* as/safecrlf-quiet-fix:
config.c: fix regression for core.safecrlf false
|
|
The commit-graph file is a very helpful feature for speeding up git
operations. In order to make it more useful, make it possible to
write the commit-graph file during standard garbage collection
operations.
Add a 'gc.commitGraph' config setting that triggers writing a
commit-graph file after any non-trivial 'git gc' command. Defaults to
false while the commit-graph feature matures. We specifically do not
want to have this on by default until the commit-graph feature is fully
integrated with history-modifying features like shallow clones.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing commit-graph files, it can be convenient to ask for all
reachable commits (starting at the ref set) in the resulting file. This
is particularly helpful when writing to stdin is complicated, such as a
future integration with 'git gc'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If core.commitGraph is true, verify the contents of the commit-graph
during 'git fsck' using the 'git commit-graph verify' subcommand. Run
this check on all alternates, as well.
We use a new process for two reasons:
1. The subcommand decouples the details of loading and verifying a
commit-graph file from the other fsck details.
2. The commit-graph verification requires the commits to be loaded
in a specific order to guarantee we parse from the commit-graph
file for some objects and from the object database for others.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph file ends with a SHA1 hash of the previous contents. If
a commit-graph file has errors but the checksum hash is correct, then we
know that the problem is a bug in Git and not simply file corruption
after-the-fact.
Compute the checksum right away so it is the first error that appears,
and make the message translatable since this error can be "corrected" by
a user by simply deleting the file and recomputing. The rest of the
errors are useful only to developers.
Be sure to continue checking the rest of the file data if the checksum
is wrong. This is important for our tests, as we break the checksum as
we modify bytes of the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph file has an extra chunk to store the parent int-ids for
parents beyond the first parent for octopus merges. Our test repo has a
single octopus merge that we can manipulate to demonstrate the 'verify'
subcommand detects incorrect values in that chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While iterating through the commit parents, perform the generation
number calculation and compare against the value stored in the
commit-graph.
The tests demonstrate that having a different set of parents affects
the generation number calculation, and this value propagates to
descendants. Hence, we drop the single-line condition on the output.
Since Git will ship with the commit-graph feature without generation
numbers, we need to accept commit-graphs with all generation numbers
equal to zero. In this case, ignore the generation number calculation.
However, verify that we should never have a mix of zero and non-zero
generation numbers. Create a test that sets one commit to generation
zero and all following commits report a failure as they have non-zero
generation in a file that contains generation number zero.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph file stores parents in a two-column portion of the
commit data chunk. If there is only one parent, then the second column
stores 0xFFFFFFFF to indicate no second parent.
The 'verify' subcommand checks the parent list for the commit loaded
from the commit-graph and the one parsed from the object database. Test
these checks for corrupt parents, too many parents, and wrong parents.
Add a boundary check to insert_parent_or_die() for when the parent
position value is out of range.
The octopus merge will be tested in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'verify' subcommand must compare the commit content parsed from the
commit-graph against the content in the object database. Use
lookup_commit() and parse_commit_in_graph_one() to parse the commits
from the graph and compare against a commit that is loaded separately
and parsed directly from the object database.
Add checks for the root tree OID.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the 'verify' subcommand, load commits directly from the object
database to ensure they exist. Parse by skipping the commit-graph.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the commit-graph file, the OID fanout chunk provides an index into
the OID lookup. The 'verify' subcommand should find incorrect values
in the fanout.
Similarly, the 'verify' subcommand should find out-of-order values in
the OID lookup.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph file requires the following three chunks:
* OID Fanout
* OID Lookup
* Commit Data
If any of these are missing, then the 'verify' subcommand should
report a failure. This includes the chunk IDs malformed or the
chunk count is truncated.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the first of several commits that add a test to check that
'git commit-graph verify' catches corruption in the commit-graph
file. The first test checks that the command catches an error in
the file signature. This is a check that exists in the existing
commit-graph reading code.
Add a helper method 'corrupt_graph_and_verify' to the test script
t5318-commit-graph.sh. This helper corrupts the commit-graph file
at a certain location, runs 'git commit-graph verify', and reports
the output to the 'err' file. This data is filtered to remove the
lines added by 'test_must_fail' when the test is run verbosely.
Then, the output is checked to contain a specific error message.
Most messages from 'git commit-graph verify' will not be marked
for translation. There will be one exception: the message that
reports an invalid checksum will be marked for translation, as that
is the only message that is intended for a typical user.
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the commit-graph file becomes corrupt, we need a way to verify
that its contents match the object database. In the manner of
'git fsck' we will implement a 'git commit-graph verify' subcommand
to report all issues with the file.
Add the 'verify' subcommand to the 'commit-graph' builtin and its
documentation. The subcommand is currently a no-op except for
loading the commit-graph into memory, which may trigger run-time
errors that would be caught by normal use. Add a simple test that
ensures the command returns a zero error code.
If no commit-graph file exists, this is an acceptable state. Do
not report any errors.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph tests should be checking that normal Git operations
succeed and have matching output with and without the commit-graph
feature enabled. However, the test was toggling 'core.graph' instead
of the correct 'core.commitGraph' variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of mucking with filesystem directly, use plumbing commands
update-ref etc. to manipulate the refs in the tests.
* cc/tests-without-assuming-ref-files-backend:
t9104: kosherly remove remote refs
|
|
"git fetch --shallow-since=<cutoff>" that specifies the cut-off
point that is newer than the existing history used to end up
grabbing the entire history. Such a request now errors out.
* nd/reject-empty-shallow-request:
upload-pack: reject shallow requests that would return nothing
|
|
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
|
|
Clean up tests in t6xxx series about 'merge' command.
* en/merge-recursive-tests:
t6036: prefer test_when_finished to manual cleanup in following test
t6036, t6042: prefer test_cmp to sequences of test
t6036, t6042: prefer test_path_is_file, test_path_is_missing
t6036, t6042: use test_line_count instead of wc -l
t6036, t6042: use test_create_repo to keep tests independent
|
|
"git diff" compares the index and the working tree. For paths
added with intent-to-add bit, the command shows the full contents
of them as added, but the paths themselves were not marked as new
files. They are now shown as new by default.
"git apply" learned the "--intent-to-add" option so that an
otherwise working-tree-only application of a patch will add new
paths to the index marked with the "intent-to-add" bit.
* nd/diff-apply-ita:
apply: add --intent-to-add
t2203: add a test about "diff HEAD" case
diff: turn --ita-invisible-in-index on by default
diff: ignore --ita-[in]visible-in-index when diffing worktree-to-tree
|
|
Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
|
|
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
|
|
* cf/submodule-progress-dissociate:
t7400: encapsulate setup code in test_expect_success
|
|
* js/rebase-i-root-fix:
t3404: check root commit in 'rebase -i --root reword root commit'
|
|
When running t7400 in a shell you observe more output than expected:
...
ok 8 - setup - hide init subdirectory
ok 9 - setup - repository to add submodules to
ok 10 - submodule add
[master (root-commit) d79ce16] one
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 one.t
ok 11 - redirected submodule add does not show progress
ok 12 - redirected submodule add --progress does show progress
ok 13 - submodule add to .gitignored path fails
...
Fix the output by encapsulating the setup code in test_expect_success
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When testing a reworded root commit, ensure that the squash-onto commit
which is created and amended is still the root commit.
Suggested-by: Phillip Wood <phillip.wood@talktalk.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* sg/t7406-chain-fix:
t7406-submodule-update: fix broken &&-chains
|
|
A test title has been reworded to clarify it.
* ks/branch-set-upstream:
t3200: clarify description of --set-upstream test
|
|
A regression to "rebase -i --root" introduced during this cycle has
been fixed.
* js/rebase-i-root-fix:
rebase --root: fix amending root commit messages
rebase --root: demonstrate a bug while amending root commit messages
|
|
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
|
|
"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
|
|
Three tests in 't7406-submodule-update' contain broken &&-chains, but
since they are all in subshells, chain-lint couldn't notice them.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The on-disk ewah format tells us how big the ewah data is,
and we blindly read that much from the buffer without
considering whether the mmap'd data is long enough, which
can lead to out-of-bound reads.
Let's make sure we have data available before reading it,
both for the ewah header/footer as well as for the bit data
itself. In particular:
- keep our ptr/len pair in sync as we move through the
buffer, and check it before each read
- check the size for integer overflow (this should be
impossible on 64-bit, as the size is given as a 32-bit
count of 8-byte words, but is possible on a 32-bit
system)
- return the number of bytes read as an ssize_t instead of
an int, again to prevent integer overflow
- compute the return value using a pointer difference;
this should yield the same result as the existing code,
but makes it more obvious that we got our computations
right
The included test is far from comprehensive, as it just
picks a static point at which to truncate the generated
bitmap. But in practice this will hit in the middle of an
ewah and make sure we're at least exercising this code.
Reported-by: Luat Nguyen <root@l4w.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17). The change did not completely remove the command
due to an issue noted in the commit's log message.
So, a test was added to ensure that a command which uses the
'--set-upstream' option fails instead of silently acting as an alias
for the '--set-upstream-to' option due to option parsing features.
To avoid confusion, clarify that the option is disabled intentionally
in the corresponding test description.
The test is expected to be around as long as we intentionally fail
on seeing the '--set-upstream' option which in turn we expect to
do for a period of time after which we can be sure that existing
users of '--set-upstream' are aware that the option is no
longer supported.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Jonathan Tan
Junio C Hamano
Stefan Beller
Todd Zullinger
SZEDER Gábor
Johannes Schindelin
Jeff King
Kaartic Sivaraam