| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In 61df89c8e5 (commit-graph: don't early exit(1) on e.g. "git status",
2019-03-25), the former 'load_commit_graph_one' was refactored into
'open_commit_graph' and 'load_commit_graph_one_fd_st' as a means of
avoiding an early-exit from non-library code.
However, 'load_commit_graph_one' does not support commit-graph chains,
and hence the 'read-graph' test tool does not work with them.
Replace 'load_commit_graph_one' with 'read_commit_graph_one' in order to
support commit-graph chains. In the spirit of 61df89c8e5,
'read_commit_graph_one' does not ever 'die()', making it a suitable
replacement here.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply a similar treatment as in the previous patch to pass a 'struct
object_directory *' through the 'load_commit_graph_one_fd_st'
initializer, too.
This prevents a potential bug where a pointer comparison is made to a
NULL 'g->odb', which would cause the commit-graph machinery to think
that a pair of commit-graphs belonged to different alternates when in
fact they do not (i.e., in the case of no '--object-dir').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In f237c8b6fe (commit-graph: implement git-commit-graph write,
2018-04-02) the test t5318.3 was introduced to ensure that calling 'git
commit-graph write' in a repository with no packfiles does not write any
commit-graph file(s).
To exercise more paths in 'builtin/commit-graph.c', this test passes
'--object-dir' to 'git commit-graph write', but the given argument
refers to the working copy, not the object directory.
Since the commit-graph sub-commands currently swallow these errors, this
does not result in a test failure. But, it is only lucky that the test
ends with no commit-graphs, since there were none to begin with.
In preparation for a future commit where an '--object-dir' argument that
does not match a known object directory will print out a failure, let's
fix the test to still use '--object-dir', but pass the correct location
to the object store instead of '.'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
|
Further tweak to a "no backslash in indexed paths" for Windows port
we applied earlier.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: safeguard better against backslashes in file names
|
|
In 224c7d70fa1 (mingw: only test index entries for backslashes, not tree
entries, 2019-12-31), we relaxed the check for backslashes in tree
entries to check only index entries.
However, the code change was incorrect: it was added to
`add_index_entry_with_check()`, not to `add_index_entry()`, so under
certain circumstances it was possible to side-step the protection.
Besides, the description of that commit purported that all index entries
would be checked when in fact they were only checked when being added to
the index (there are code paths that do not do that, constructing
"transient" index entries).
In any case, it was pointed out in one insightful review at
https://github.com/git-for-windows/git/pull/2437#issuecomment-566771835
that it would be a much better idea to teach `verify_path()` to perform
the check for a backslash. This is safer, even if it comes with two
notable drawbacks:
- `verify_path()` cannot say _what_ is wrong with the path, therefore
the user will no longer be told that there was a backslash in the
path, only that the path was invalid.
- The `git apply` command also calls the `verify_path()` function, and
might have been able to handle Windows-style paths (i.e. with
backslashes instead of forward slashes). This will no longer be
possible unless the user (temporarily) sets `core.protectNTFS=false`.
Note that `git add <windows-path>` will _still_ work because
`normalize_path_copy_len()` will convert the backslashes to forward
slashes before hitting the code path that creates an index entry.
The clear advantage is that `verify_path()`'s purpose is to check the
validity of the file name, therefore we naturally tap into all the code
paths that need safeguarding, also implicitly into future code paths.
The benefits of that approach outweigh the downsides, so let's move the
check from `add_index_entry_with_check()` to `verify_path()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, horizontal lines in rendered graphs can lose their
coloring. This is due to a use of graph_line_addch() instead of
graph_line_write_column(). Using a ternary operator to pick the
character is nice for compact code, but we actually need a column to
provide the color.
Add a test to t4215-log-skewed-merges.sh to prevent regression.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git log --graph" shows a merge commit that has two collapsing
lines, like:
| | | | *
| |_|_|/|
|/| | |/
| | |/|
| |/| |
| * | |
* | | |
we trigger an assert():
graph.c:1228: graph_output_collapsing_line: Assertion
`graph->mapping[i - 3] == target' failed.
The assert was introduced by eaf158f8 ("graph API: Use horizontal
lines for more compact graphs", 2009-04-21), which is quite old.
This assert is trying to say that when we complete a horizontal
line with a single slash, it is because we have reached our target.
It is actually the _second_ collapsing line that hits this assert.
The reason we are in this code path is because we are collapsing
the first line, and in that case we are hitting our target now
that the horizontal line is complete. However, the second line
cannot be a horizontal line, so it will collapse without horizontal
lines. In this case, it is inappropriate to assert that we have
reached our target, as we need to continue for another column
before reaching the target. Dropping the assert is safe here.
The new behavior in 0f0f389f12 (graph: tidy up display of
left-skewed merges, 2019-10-15) caused the behavior change that
made this assertion failure possible. In addition to making the
assert possible, it also changed how multiple edges collapse.
In a larger example, the current code will output a collapse
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
| | * | | |
However, the intended collapse should allow multiple horizontal lines
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
| | * | | |
This behavior is not corrected by this change, but is noted for a later
update.
Helped-by: Jeff King <peff@peff.net>
Reported-by: Bradley Smith <brad@brad-smith.co.uk>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git sparse-checkout list" subcommand learned to give its output in
a more concise form when the "cone" mode is in effect.
* ds/sparse-list-in-cone-mode:
sparse-checkout: document interactions with submodules
sparse-checkout: list directories in cone mode
|
|
An earlier update to Git for Windows declared that a tree object is
invalid if it has a path component with backslash in it, which was
overly strict, which has been corrected. The only protection the
Windows users need is to prevent such path (or any path that their
filesystem cannot check out) from entering the index.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: only test index entries for backslashes, not tree entries
|
|
During a clone of a repository that contained a file with a backslash in
its name in the past, as of v2.24.1(2), Git for Windows prints errors
like this:
error: filename in tree entry contains backslash: '\'
The idea is to prevent Git from even trying to write files with
backslashes in their file names: while these characters are valid in
file names on other platforms, on Windows it is interpreted as directory
separator (which would obviously lead to ambiguities, e.g. when there is
a file `a\b` and there is also a file `a/b`).
Arguably, this is the wrong layer for that error: As long as the user
never checks out the files whose names contain backslashes, there should
not be any problem in the first place.
So let's loosen the requirements: we now leave tree entries with
backslashes in their file names alone, but we do require any entries
that are added to the Git index to contain no backslashes on Windows.
Note: just as before, the check is guarded by `core.protectNTFS` (to
allow overriding the check by toggling that config setting), and it
is _only_ performed on Windows, as the backslash is not a directory
separator elsewhere, even when writing to NTFS-formatted volumes.
An alternative approach would be to try to prevent creating files with
backslashes in their file names. However, that comes with its own set of
problems. For example, `git config -f C:\ProgramData\Git\config ...` is
a very valid way to specify a custom config location, and we obviously
do _not_ want to prevent that. Therefore, the approach chosen in this
patch would appear to be better.
This addresses https://github.com/git-for-windows/git/issues/2435
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* js/use-test-tool-on-path:
t3008: find test-tool through path lookup
|
|
Forbid pathnames that the platform's filesystem cannot represent on
MinGW.
* js/mingw-reserved-filenames:
mingw: refuse paths containing reserved names
mingw: short-circuit the conversion of `/dev/null` to UTF-16
|
|
Using 'git submodule (init|deinit)' a user can select a subset of
submodules to populate. This behaves very similar to the sparse-checkout
feature, but those directories contain their own .git directory
including an object database and ref space. To have the sparse-checkout
file also determine if those files should exist would easily cause
problems. Therefore, keeping these features independent in this way
is the best way forward.
Also create a test that demonstrates this behavior to make sure
it doesn't change as the sparse-checkout feature evolves.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do not use $GIT_BUILD_DIR without quotes; it may contain spaces and be
split into fields. But it is not necessary to access test-tool with an
absolute path in the first place as it can be found via path lookup.
Remove the explicit path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted fixes to the directory traversal API.
* en/fill-directory-fixes:
dir.c: use st_add3() for allocation size
dir: consolidate similar code in treat_directory()
dir: synchronize treat_leading_path() and read_directory_recursive()
dir: fix checks on common prefix directory
dir: break part of read_directory_recursive() out for reuse
dir: exit before wildcard fall-through if there is no wildcard
dir: remove stray quote character in comment
Revert "dir.c: make 'git-status --ignored' work within leading directories"
t3011: demonstrate directory traversal failures
|
|
Test cleanup.
* rs/test-cleanup:
t6030: don't create unused file
t5580: don't create unused file
t3501: don't create unused file
t7004: don't create unused file
t4256: don't create unused file
|
|
Extend test coverage for a recent fix.
* rs/xdiff-ignore-ws-w-func-context:
t4015: improve coverage of function context test
|
|
The effort to move "git-add--interactive" to C continues.
* js/add-p-in-c:
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
built-in add -p: implement the '/' ("search regex") command
built-in add -p: implement the 'g' ("goto") command
built-in add -p: implement hunk editing
strbuf: add a helper function to call the editor "on an strbuf"
built-in add -p: coalesce hunks after splitting them
built-in add -p: implement the hunk splitting feature
built-in add -p: show different prompts for mode changes and deletions
built-in app -p: allow selecting a mode change as a "hunk"
built-in add -p: handle deleted empty files
built-in add -p: support multi-file diffs
built-in add -p: offer a helpful error message when hunk navigation failed
built-in add -p: color the prompt and the help text
built-in add -p: adjust hunk headers as needed
built-in add -p: show colored hunks by default
built-in add -i: wire up the new C code for the `patch` command
built-in add -i: start implementing the `patch` functionality in C
|
|
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
|
|
Redo "git name-rev" to avoid recursive calls.
* sg/name-rev-wo-recursion:
name-rev: cleanup name_ref()
name-rev: eliminate recursion in name_rev()
name-rev: use 'name->tip_name' instead of 'tip_name'
name-rev: drop name_rev()'s 'generation' and 'distance' parameters
name-rev: restructure creating/updating 'struct rev_name' instances
name-rev: restructure parsing commits and applying date cutoff
name-rev: pull out deref handling from the recursion
name-rev: extract creating/updating a 'struct name_rev' into a helper
t6120: add a test to cover inner conditions in 'git name-rev's name_rev()
name-rev: use sizeof(*ptr) instead of sizeof(type) in allocation
name-rev: avoid unnecessary cast in name_ref()
name-rev: use strbuf_strip_suffix() in get_rev_name()
t6120-describe: modernize the 'check_describe' helper
t6120-describe: correct test repo history graph in comment
|
|
Some Porcelain commands are written in Perl, and tests on them are
expected not to work when the platform lacks a working perl.
* ra/t5150-depends-on-perl:
t5150: skip request-pull test if Perl is disabled
|
|
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
|
|
A few more commands learned the "--pathspec-from-file" command line
option.
* am/pathspec-f-f-checkout:
checkout, restore: support the --pathspec-from-file option
doc: restore: synchronize <pathspec> description
doc: checkout: synchronize <pathspec> description
doc: checkout: fix broken text reference
doc: checkout: remove duplicate synopsis
add: support the --pathspec-from-file option
cmd_add: prepare for next patch
|
|
An earlier series to teach "--pathspec-from-file" to "git commit"
forgot to make the option incompatible with "--all", which has been
corrected.
* am/pathspec-from-file:
commit: forbid --pathspec-from-file --all
|
|
There are a couple of reserved names that cannot be file names on
Windows, such as `AUX`, `NUL`, etc. For an almost complete list, see
https://docs.microsoft.com/en-us/windows/win32/fileio/naming-a-file
If one would try to create a directory named `NUL`, it would actually
"succeed", i.e. the call would return success, but nothing would be
created.
Worse, even adding a file extension to the reserved name does not make
it a valid file name. To understand the rationale behind that behavior,
see https://devblogs.microsoft.com/oldnewthing/20031022-00/?p=42073
Let's just disallow them all.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On FreeBSD, when executed by root ls enables the '-A' option:
-A Include directory entries whose names begin with a dot (`.')
except for . and ... Automatically set for the super-user unless
-I is specified.
As a result the .git directory appeared in the output when run as root.
Simulate no-dotfile ls behaviour using a shell glob.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ed Maste <emaste@FreeBSD.org>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our optimization to avoid calling into read_directory_recursive() when
all pathspecs have a common leading directory mean that we need to match
the logic that read_directory_recursive() would use if we had just
called it from the root. Since it does more than call treat_path() we
need to copy that same logic.
Alternatively, we could try to change treat_path to return path_recurse
for an untracked directory under the given special circumstances that
this logic checks for, but a simple switch results in many test failures
such as 'git clean -d' not wiping out untracked but empty directories.
To work around that, we'd need the caller of treat_path to check for
path_recurse and sometimes special case it into path_untracked. In
other words, we'd still have extra logic in both places.
Needing to duplicate logic like this means it is guaranteed someone will
eventually need to make further changes and forget to update both
locations. It is tempting to just nuke the leading_directory special
casing to avoid such bugs and simplify the code, but unpack_trees'
verify_clean_subdirectory() also calls read_directory() and does so with
a non-empty leading path, so I'm hesitant to try to restructure further.
Add obnoxious warnings to treat_leading_path() and
read_directory_recursive() to try to warn people of such problems.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many years ago, the directory traversing logic had an optimization that
would always recurse into any directory that was a common prefix of all
the pathspecs without walking the leading directories to get down to
the desired directory. Thus,
git ls-files -o .git/ # case A
would notice that .git/ was a common prefix of all pathspecs (since
it is the only pathspec listed), and then traverse into it and start
showing unknown files under that directory. Unfortunately, .git/ is not
a directory we should be traversing into, which made this optimization
problematic. This also affected cases like
git ls-files -o --exclude-standard t/ # case B
where t/ was in the .gitignore file and thus isn't interesting and
shouldn't be recursed into. It also affected cases like
git ls-files -o --directory untracked_dir/ # case C
where untracked_dir/ is indeed untracked and thus interesting, but the
--directory flag means we only want to show the directory itself, not
recurse into it and start listing untracked files below it.
The case B class of bugs were noted and fixed in commits 16e2cfa90993
("read_directory(): further split treat_path()", 2010-01-08) and
48ffef966c76 ("ls-files: fix overeager pathspec optimization",
2010-01-08), with the idea being that we first wanted to check whether
the common prefix was interesting. The former patch noted that
treat_path() couldn't be used when checking the common prefix because
treat_path() requires a dir_entry() and we haven't read any directories
at the point we are checking the common prefix. So, that patch split
treat_one_path() out of treat_path(). The latter patch then created a
new treat_leading_path() which duplicated by hand the bits of
treat_path() that couldn't be broken out and then called
treat_one_path() for the remainder. There were three problems with this
approach:
* The duplicated logic in treat_leading_path() accidentally missed the
check for special paths (such as is_dot_or_dotdot and matching
".git"), causing case A types of bugs to continue to be an issue.
* The treat_leading_path() logic assumed we should traverse into
anything where path_treatment was not path_none, i.e. it perpetuated
class C types of bugs.
* It meant we had split logic that needed to kept in sync, running the
risk that people introduced new inconsistencies (such as in commit
be8a84c52669, which we reverted earlier in this series, or in commit
df5bcdf83ae which we'll fix in a subsequent commit)
Fix most these problems by making treat_leading_path() not only loop
over each leading path component, but calling treat_path() directly on
each. To do so, we have to create a synthetic dir_entry, but that only
takes a few lines. Then, pay attention to the path_treatment result we
get from treat_path() and don't treat path_excluded, path_untracked, and
path_recurse all the same as path_recurse.
This leaves one remaining problem, the new inconsistency from commit
df5bcdf83ae. That will be addressed in a subsequent commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test that includes an actual function line in the test file to
check if context is expanded to include the whole function, and add an
ignored change before function context to check if that one stays hidden
while the originally ignored change within function context is shown.
This differs from the existing test, which is concerned with the case
where there is no function line at all in the file (and we might look
past the beginning of the file).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I forgot this in my previous patch `--pathspec-from-file` for
`git commit` [1]. When both `--pathspec-from-file` and `--all` were
specified, `--all` took precedence and `--pathspec-from-file` was
ignored. Before `--pathspec-from-file` was implemented, this case was
prevented by this check in `parse_and_validate_options()` :
die(_("paths '%s ...' with -a does not make sense"), argv[0]);
It is unfortunate that these two cases are disconnected. This came as
result of how the code was laid out before my patches, where `pathspec`
is parsed outside of `parse_and_validate_options()`. This branch is
already full of refactoring patches and I did not dare to go for another
one.
Fix by mirroring `die()` for `--pathspec-from-file` as well.
[1] Commit e440fc58 ("commit: support the --pathspec-from-file option" 2019-11-19)
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t3434.3 was fixed by commit 917d0d6234be ("Merge branch
'js/rebase-r-safer-label'", 2019-12-05). t3434 did not exist in
js/rebase-r-safer-label, so could not have marked the test as fixed, and
it was probably not noticed that the merge fixed this test. Mark it as
fixed now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
my_bisect_log3.txt was added by c9c4e2d5a2 (bisect: only check merge
bases when needed, 2008-08-22), but hasn't been used then and since.
Get rid of it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The file "out" was introduced by 13b57da833 (mingw: verify that paths
are not mistaken for remote nicknames, 2017-05-29), but has not actually
been used then and since. Get rid of it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The file "out" became unused with fd53b7ffd1 (merge-recursive: improve
add_cacheinfo error handling, 2018-04-19); get rid of it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* js/t3404-indent-fix:
t3404: fix indentation
|
|
The test on "fast-import" used to get stuck when "fast-import" died
in the middle.
* sg/t9300-robustify:
t9300-fast-import: don't hang if background fast-import exits too early
t9300-fast-import: store the PID in a variable instead of pidfile
|
|
Test coverage update in preparation for further work on "git add -i".
* js/add-i-a-bit-more-tests:
apply --allow-overlap: fix a corner case
git add -p: use non-zero exit code when the diff generation failed
t3701: verify that the diff.algorithm config setting is handled
t3701: verify the shown messages when nothing can be added
t3701: add a test for the different `add -p` prompts
t3701: avoid depending on the TTY prerequisite
t3701: add a test for advanced split-hunk editing
|
|
Code clean-up.
* dl/range-diff-with-notes:
range-diff: clear `other_arg` at end of function
range-diff: mark pointers as const
t3206: fix incorrect test name
|
|
The "diff" machinery learned not to lose added/removed blank lines
in the context when --ignore-blank-lines and --function-context are
used at the same time.
* rs/xdiff-ignore-ws-w-func-context:
xdiff: unignore changes in function context
|
|
"git rebase" did not work well when format.useAutoBase
configuration variable is set, which has been corrected.
* dl/rebase-with-autobase:
rebase: fix format.useAutoBase breakage
format-patch: teach --no-base
t4014: use test_config()
format-patch: fix indentation
t3400: demonstrate failure with format.useAutoBase
|
|
Test cleanup.
* dl/test-cleanup: (26 commits)
t7700: stop losing return codes of git commands
t7700: make references to SHA-1 generic
t7700: replace egrep with grep
t7700: consolidate code into test_has_duplicate_object()
t7700: consolidate code into test_no_missing_in_packs()
t7700: s/test -f/test_path_is_file/
t7700: move keywords onto their own line
t7700: remove spaces after redirect operators
t7700: drop redirections to /dev/null
t7501: stop losing return codes of git commands
t7501: remove spaces after redirect operators
t5703: stop losing return codes of git commands
t5703: simplify one-time-sed generation logic
t5317: use ! grep to check for no matching lines
t5317: stop losing return codes of git commands
t4138: stop losing return codes of git commands
t4015: use test_write_lines()
t4015: stop losing return codes of git commands
t3600: comment on inducing SIGPIPE in `git rm`
t3600: stop losing return codes of git commands
...
|
|
In a repository with many packfiles, the cost of the procedure that
avoids registering the same packfile twice was unnecessarily high
by using an inefficient search algorithm, which has been corrected.
* cs/store-packfiles-in-hashmap:
packfile.c: speed up loading lots of packfiles
|
|
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch implements the hunk searching feature in the C version of
`git add -p`.
A test is added to verify that this behavior matches the one of the Perl
version of `git add -p`.
Note that this involves a change of behavior: the Perl version uses (of
course) the Perl flavor of regular expressions, while this patch uses
the regcomp()/regexec(), i.e. POSIX extended regular expressions. In
practice, this behavior change is unlikely to matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this patch, it is now possible to see a summary of the available
hunks and to navigate between them (by number).
A test is added to verify that this behavior matches the one of the Perl
version of `git add -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If this developer's workflow is any indication, then this is *the* most
useful feature of Git's interactive `add `command.
Note: once again, this is not a verbatim conversion from the Perl code
to C: the `hunk_splittable()` function, for example, essentially did all
the work of splitting the hunk, just to find out whether more than one
hunk would have been the result (and then tossed that result into the
trash). In C we instead count the number of resulting hunks (without
actually doing the work of splitting, but just counting the transitions
from non-context lines to context lines), and store that information
with the hunk, and we do that *while* parsing the diff in the first
place.
Another deviation: the built-in `git add -p` was designed with a single
strbuf holding the diff (and another one holding the colored diff, if
that one was asked for) in mind, and hunks essentially store just the
start and end offsets pointing into that strbuf. As a consequence, when
we split hunks, we now use a special mode where the hunk header is
generated dynamically, and only the rest of the hunk is stored using
such start/end offsets. This way, we also avoid the frequent
formatting/re-parsing of the hunk header of the Perl version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a user uses the sparse-checkout feature in cone mode, they
add patterns using "git sparse-checkout set <dir1> <dir2> ..."
or by using "--stdin" to provide the directories line-by-line over
stdin. This behaviour naturally looks a lot like the way a user
would type "git add <dir1> <dir2> ..."
If core.ignoreCase is enabled, then "git add" will match the input
using a case-insensitive match. Do the same for the sparse-checkout
feature.
Perform case-insensitive checks while updating the skip-worktree
bits during unpack_trees(). This is done by changing the hash
algorithm and hashmap comparison methods to optionally use case-
insensitive methods.
When this is enabled, there is a small performance cost in the
hashing algorithm. To tease out the worst possible case, the
following was run on a repo with a deep directory structure:
git ls-tree -d -r --name-only HEAD |
git sparse-checkout set --stdin
The 'set' command was timed with core.ignoreCase disabled or
enabled. For the repo with a deep history, the numbers were
core.ignoreCase=false: 62s
core.ignoreCase=true: 74s (+19.3%)
For reproducibility, the equivalent test on the Linux kernel
repository had these numbers:
core.ignoreCase=false: 3.1s
core.ignoreCase=true: 3.6s (+16%)
Now, this is not an entirely fair comparison, as most users
will define their sparse cone using more shallow directories,
and the performance improvement from eb42feca97 ("unpack-trees:
hash less in cone mode" 2019-11-21) can remove most of the
hash cost. For a more realistic test, drop the "-r" from the
ls-tree command to store only the first-level directories.
In that case, the Linux kernel repository takes 0.2-0.25s in
each case, and the deep repository takes one second, plus or
minus 0.05s, in each case.
Thus, we _can_ demonstrate a cost to this change, but it is
unlikely to matter to any reasonable sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Taylor Blau
Junio C Hamano
Johannes Schindelin via GitGitGadget
Derrick Stolee
Johannes Schindelin
Johannes Sixt
Ed Maste
Elijah Newren
René Scharfe
Alexandr Miloslavskiy
ryenus