| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
__gitcomp_nl() iterates over all the possible completion words it gets
as argument
- filtering matching words,
- appending a trailing space to each matching word (in all but two
cases),
- prepending a prefix to each matching word (when completing words
after e.g. '--option=<TAB>' or 'master..<TAB>'), and
- adding each matching word to the COMPREPLY array.
This takes a while when a lot of refs are passed to __gitcomp_nl().
The previous changes in this series ensure that __git_refs() lists
only refs matching the current word to be completed, making a second
filtering in __gitcomp_nl() redundant.
Adding the necessary prefix and suffix could be done in __git_refs()
as well:
- When refs come from 'git for-each-ref', then that prefix and
suffix could be added much more efficiently using a 'git
for-each-ref' format containing said prefix and suffix. Care
should be taken, though, because that prefix might contain
'for-each-ref' format specifiers as part of the left hand side of
a '..' range or '...' symmetric difference notation or
fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'.
Doubling every '%' in the prefix will prevent 'git for-each-ref'
from interpolating any of those contained specifiers.
- When refs come from 'git ls-remote', then that prefix and suffix
can be added in the shell loop that has to process 'git
ls-remote's output anyway.
- Finally, the prefix and suffix can be added to that handful of
potentially matching symbolic and pseudo refs right away in the
shell loop listing them.
And then all what is still left to do is to assign a bunch of
newline-separated words to a shell array, which can be done without a
shell loop iterating over each word, basically making all of
__gitcomp_nl() unnecessary for refs completion.
Add the helper function __gitcomp_direct() to fill the COMPREPLY array
with prefiltered and preprocessed words without any additional
processing, without a shell loop, with just one single compound
assignment. Modify __git_refs() to accept prefix and suffix
parameters and add them to each and every listed ref as described
above. Modify __git_complete_refs() to pass the prefix and suffix
parameters to __git_refs() and to feed __git_refs()'s output to
__gitcomp_direct() instead of __gitcomp_nl().
This speeds up refs completion when there are a lot of refs matching
the current word to be completed. Listing all branches for completion
in a repo with 100k local branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs
real 0m2.028s
user 0m1.692s
sys 0m0.344s
Before this patch:
real 0m1.135s
user 0m1.112s
sys 0m0.024s
After:
real 0m0.367s
user 0m0.352s
sys 0m0.020s
On Windows, near the beginning:
real 0m13.078s
user 0m1.609s
sys 0m0.060s
Before this patch:
real 0m2.093s
user 0m1.641s
sys 0m0.060s
After:
real 0m0.683s
user 0m0.203s
sys 0m0.076s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When completing refs, several __git_refs() code paths list all the
refs from the refs/{heads,tags,remotes}/ hierarchy and then
__gitcomp_nl() iterates over those refs in a shell loop to filter out
refs not matching the current ref to be completed. This comes with a
considerable performance penalty when a repository contains a lot of
refs but the current ref can be uniquely completed or when only a
handful of refs match the current ref.
Reduce the number of iterations in __gitcomp_nl() from the number of
refs to the number of matching refs by specifying appropriate globbing
patterns to 'git for-each-ref' and 'git ls-remote' to list only those
refs that match the current ref to be completed. However, do so only
when the ref to match is explicitly given as parameter, because the
current word on the command line might contain a prefix like
'--option=' or 'branch..'. The __git_complete_refs() and
__git_complete_fetch_refspecs() helpers introduced previously in this
patch series already call __git_refs() specifying this current ref
parameter, so all their callsites, i.e. all places in the completion
script doing refs completion, can benefit from this optimization.
Furthermore, list only those symbolic and pseudo refs that match the
current ref to be completed. Though it doesn't matter at all in
itself performance-wise, it will allow us further significant
optimizations later in this series.
This speeds up refs completion considerably when there are a lot of
non-matching refs to be filtered out. Uniquely completing a branch in
a repository with 100k local branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m0.831s
user 0m0.808s
sys 0m0.028s
After:
real 0m0.119s
user 0m0.104s
sys 0m0.008s
On Windows, before:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
After:
real 0m0.377s
user 0m0.015s
sys 0m0.030s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made
possible to complete short refs with a '^' prefix.
Extend the support to full refs to make completing '^refs/...' work.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After 'git fetch <remote> <TAB>' our completion script offers refspecs
that will fetch to a local branch with the same name as in the remote
repository, e.g. 'master:master'. This also completes
non-fast-forward refspecs, i.e. after a '+' prefix like
'+master:master', and fully qualified refspecs, e.g.
'refs/heads/master:refs/heads/master'. However, it does not complete
non-fast-forward fully qualified refspecs (or fully qualified refspecs
following any other prefix, e.g. '--option=', though currently no git
command supports such an option, but third party git commands might).
These refspecs are listed by the __git_refs2() function, which is just
a thin wrapper iterating over __git_refs()'s output, turning each
listed ref into a refspec. Now, it's certainly possible to modify
__git_refs2() and its callsite to pass an extra parameter containing
only the ref part of the current word to be completed (to follow suit
of the previous commit) to deal with prefixed fully qualified refspecs
as well. Unfortunately, keeping the current behavior unchanged in the
"no extra parameter" case brings in a bit of subtlety, which makes the
resulting code ugly and compelled me to write a 8-line long comment in
the proof of concept. Not good. However, since the callsite has to
be modified for proper functioning anyway, we might as well leave
__git_refs2() as is and introduce a new helper function without
backwards compatibility concerns.
Add the new function __git_complete_fetch_refspecs() that has all the
necessary parameters to do the right thing in all cases mentioned
above, including non-fast-forward fully qualified refspecs. This new
function can also easier benefit from optimizations coming later in
this patch series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completing full refs currently only works when the full ref stands on
in its own on the command line, but doesn't work when the current word
to be completed contains a prefix before the full ref, e.g.
'--option=refs/<TAB>' or 'master..refs/bis<TAB>'.
The reason is that __git_refs() looks at the current word to be
completed ($cur) as a whole to decide whether it has to list full (if
it starts with 'refs/') or short refs (otherwise). However, $cur also
holds said '--option=' or 'master..' prefixes, which of course throw
off this decision. Luckily, the default action is to list short refs,
that's why completing short refs happens to work even after a
'master..<TAB>' prefix and similar cases.
Pass only the ref part of the current word to be completed to
__git_refs() as a new positional parameter, so it can make the right
decision even if the whole current word contains some kind of a
prefix.
Make this new parameter the 4. positional parameter and leave the 3.
as an ignored placeholder for now (it will be used later in this patch
series).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
__git_refs() currently accepts two optional positional parameters: a
remote and a flag for 'git checkout's tracking DWIMery. To fix a
minor bug, and, more importantly, for faster refs completion, this
series will add three more parameters: a prefix, the current word to
be completed and a suffix, i.e. the options accepted by __gitcomp() &
friends, and will change __git_refs() to list only refs matching that
given current word and to add that given prefix and suffix to the
listed refs.
However, __git_refs() is the helper function that is most likely used
in users' custom completion scriptlets for their own git commands, and
we don't want to break those, so
- we can't change __git_refs()'s default output format, i.e. we
can't by default append a trailing space to every listed ref,
meaning that the suffix parameter containing the default trailing
space would have to be specified on every invocation, and
- we can't change the position of existing positional parameters
either, so there would have to be plenty of set-but-empty
placeholder positional parameters all over the completion script.
Furthermore, with five positional parameters it would be really hard
to remember which position means what.
To keep callsites simple, add the new wrapper function
__git_complete_refs() around __git_refs(), which:
- instead of positional parameters accepts real '--opt=val'-style
options and with minimalistic option parsing translates them to
__git_refs()'s and __gitcomp_nl()'s positional parameters, and
- includes the '__gitcomp_nl "$(__git_refs ...)" ...' command
substitution to make its behavior match its name and the behavior
of other __git_complete_* functions, and to limit future changes
in this series to __git_refs() and this new wrapper function.
Call this wrapper function instead of __git_refs() wherever possible
throughout the completion script, i.e. when __git_refs()'s output is
fed to __gitcomp_nl() right away without further processing, which
means all callsites except a single one in the __git_refs2() helper.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output of 'git rev-parse --git-dir' can be either a relative or an
absolute path, depending on whether the current working directory is
at the top of the worktree or the .git directory or not, or how the
path to the repository is specified via the '--git-dir=<path>' option
or the $GIT_DIR environment variable. And if that output is a
relative path, then it is relative to the directory where any 'git
-C <path>' options might have led us.
This doesn't matter at all for regular scripts, because the git
wrapper automatically takes care of changing directories according to
the '-C <path>' options, and the scripts can then simply follow any
path returned by 'git rev-parse --git-dir', even if it's a relative
path.
Our Bash completion script, however, is unique in that it must run
directly in the user's interactive shell environment. This means that
it's not executed through the git wrapper and would have to take care
of any '-C <path> options on its own, and it can't just change
directories as it pleases. Consequently, adding support for taking
any '-C <path>' options on the command line into account during
completion turned out to be considerably more difficult, error prone
and required more subshells and git processes when it had to cope with
a relative path to the .git directory.
Help this rather special use case and teach 'git rev-parse' a new
'--absolute-git-dir' option which always outputs a canonicalized
absolute path to the .git directory, regardless of whether the path is
discovered automatically or is specified via $GIT_DIR or 'git
--git-dir=<path>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e832f5c09680 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check how __git_refs() lists refs in different scenarios, i.e.
- short and full refs,
- from a local or from a remote repository,
- remote specified via path, name or URL,
- with or without a repository specified on the command line,
- non-existing remote,
- unique remote branches for 'git checkout's tracking DWIMery,
- not in a git repository, and
- interesting combinations of the above.
Seven of these tests expect failure, mostly demonstrating bugs related
to listing refs from a remote repository:
- ignoring the repository specified on the command line (2 tests),
- listing refs from the wrong place when the name of a configured
remote happens to match a directory,
- listing only 'HEAD' but no short refs from a remote given as URL,
- listing 'HEAD' even from non-existing remotes (2 tests), and
- listing 'HEAD' when not in a repository.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The __gitdir() helper function shouldn't output anything if not in a
git repository. The relevant tests only checked its error code, so
extend them to ensure that there's no output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests of the __gitdir() helper function use the $TRASH_DIRECTORY
variable in direct path comparisons. In general this should be
avoided, because it might contain symbolic links. There happens to be
no issues with this here, however, because those tests use
$TRASH_DIRECTORY both for specifying the expected result and for
specifying input which in turn is just 'echo'ed verbatim.
Other __gitdir() tests ask for the path of the trash directory by
running $(pwd -P) in each test, sometimes even twice in a single test.
Run $(pwd) only once at the beginning of the test script to store the
path of the trash directory in a variable, and use that variable in
all __gitdir() tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test helper functions test_gitcomp() and test_gitcomp_nl() leak
the $cur variable into the test environment. Since this variable has
a special role in the Bash completion script (it holds the word
currently being completed) it influences the behavior of most
completion functions and thus this leakage could interfere with
subsequent tests. Although there are no such issues in the current
tests, early versions of the new tests that will be added later in
this series suffered because of this.
It's better to play safe and declare $cur local in those test helper
functions. 'local' is bashism, of course, but the tests of the Bash
completion script are run under Bash anyway, and there are already
other variables declared local in this test script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While preparing commits, three tests added newly created files to the
index using 'git add .', which added not only the files in question
but leftover test cruft from previous tests like the files 'expected'
and 'actual' as well. Luckily, this had no effect on the tests'
correctness.
Add only the files we are actually interested in.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
|
|
"make -C t failed" will now run only the tests that failed in the
previous run. This is usable only when prove is not use, and gives
a useless error message when run after "make clean", but otherwise
is serviceable.
* js/re-running-failed-tests:
t/Makefile: add a rule to re-run previously-failed tests
|
|
The user can specify a custom update method that is run when
"submodule update" updates an already checked out submodule. This
was ignored when checking the submodule out for the first time and
we instead always just checked out the commit that is bound to the
path in the superproject's index.
* sb/submodule-update-initial-runs-custom-script:
submodule update: run custom update script for initial populating as well
|
|
When a submodule "A", which has another submodule "B" nested within
it, is "absorbed" into the top-level superproject, the inner
submodule "B" used to be left in a strange state. The logic to
adjust the .git pointers in these submodules has been corrected.
* sb/submodule-recursive-absorb:
submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
cache.h: expose the dying procedure for reading gitlinks
setup: add gentle version of resolve_git_dir
|
|
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
* sb/unpack-trees-super-prefix:
unpack-trees: support super-prefix option
t1001: modernize style
t1000: modernize style
read-tree: use OPT_BOOL instead of OPT_SET_INT
|
|
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
|
|
Test tweaks for those who have default ACL in their git source tree
that interfere with the umask test.
* mm/reset-facl-before-umask-test:
t0001: don't let a default ACL interfere with the umask test
|
|
Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run
our tests but /usr/local/bin/unzip is usable.
* js/unzip-in-usr-bin-workaround:
test-lib: on FreeBSD, look for unzip(1) in /usr/local/bin/
|
|
After starting "git rebase -i", which first opens the user's editor
to edit the series of patches to apply, but before saving the
contents of that file, "git status" failed to show the current
state (i.e. you are in an interactive rebase session, but you have
applied no steps yet) correctly.
* js/status-pre-rebase-i:
status: be prepared for not-yet-started interactive rebase
|
|
"git submodule add" used to be confused and refused to add a
locally created repository; users can now use "--force" option
to add them.
* sb/submodule-add-force:
submodule add: extend force flag to add existing repos
|
|
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck --connectivity-check" was not working at all.
* jk/fsck-connectivity-check-fix:
fsck: lazily load types under --connectivity-only
fsck: move typename() printing to its own function
t1450: use "mv -f" within loose object directory
fsck: check HAS_OBJ more consistently
fsck: do not fallback "git fsck <bogus>" to "git fsck"
fsck: tighten error-checks of "git fsck <head>"
fsck: prepare dummy objects for --connectivity-check
fsck: report trees as dangling
t1450: clean up sub-objects in duplicate-entry test
|
|
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
|
|
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
|
|
"git show-ref HEAD" used with "--verify" because the user is not
interested in seeing refs/remotes/origin/HEAD, and used with
"--head" because the user does not want HEAD to be filtered out,
i.e. "git show-ref --head --verify HEAD", did not work as expected.
* vp/show-ref-verify-head:
show-ref: remove a stale comment
show-ref: remove dead `if (verify)' check
show-ref: detect dangling refs under --verify as well
show-ref: move --quiet handling into show_one()
show-ref: allow -d to work with --verify
show-ref: accept HEAD with --verify
|
|
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
|
|
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
|
|
The sequencer machinery has been further enhanced so that a later
set of patches can start using it to reimplement "rebase -i".
* js/sequencer-i-countdown-3: (38 commits)
sequencer (rebase -i): write out the final message
sequencer (rebase -i): write the progress into files
sequencer (rebase -i): show the progress
sequencer (rebase -i): suggest --edit-todo upon unknown command
sequencer (rebase -i): show only failed cherry-picks' output
sequencer (rebase -i): show only failed `git commit`'s output
sequencer: use run_command() directly
sequencer: update reading author-script
sequencer (rebase -i): differentiate between comments and 'noop'
sequencer (rebase -i): implement the 'drop' command
sequencer (rebase -i): allow rescheduling commands
sequencer (rebase -i): respect strategy/strategy_opts settings
sequencer (rebase -i): respect the rebase.autostash setting
sequencer (rebase -i): run the post-rewrite hook, if needed
sequencer (rebase -i): record interrupted commits in rewritten, too
sequencer (rebase -i): copy commit notes at end
sequencer (rebase -i): set the reflog message consistently
sequencer (rebase -i): refactor setting the reflog message
sequencer (rebase -i): allow fast-forwarding for edit/reword
sequencer (rebase -i): implement the 'reword' command
...
|
|
"git fsck" inspects loose objects more carefully now.
* jk/loose-object-fsck:
fsck: detect trailing garbage in all object types
fsck: parse loose object paths directly
sha1_file: add read_loose_object() function
t1450: test fsck of packed objects
sha1_file: fix error message for alternate objects
t1450: refactor loose-object removal
|
|
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
|
|
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd42bd0724aebed6e3b07c4ea2a2d5e8. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch automates the process of determining which tests failed
previously and re-running them.
While developing patch series, it is a good practice to run the test
suite from time to time, just to make sure that obvious bugs are caught
early. With complex patch series, it is common to run `make -j15 -k
test`, i.e. run the tests in parallel and *not* stop at the first
failing test but continue. This has the advantage of identifying
possibly multiple problems in one big test run.
It is particularly important to reduce the turn-around time thusly on
Windows, where the test suite spends 45 minutes on the computer on which
this patch was developed.
It is the most convenient way to determine which tests failed after
running the entire test suite, in parallel, to look for left-over "trash
directory.t*" subdirectories in the t/ subdirectory. However, those
directories might live outside t/ when overridden using the
--root=<directory> option, to which the Makefile has no access. The next
best method is to grep explicitly for failed tests in the test-results/
directory, which the Makefile *can* access.
Please note that the often-recommended `prove` tool requires Perl, and
that opens a whole new can of worms on Windows. As no native Windows Perl
comes with Subversion bindings, we have to use a Perl in Git for Windows
that uses the POSIX emulation layer named MSYS2 (which is a portable
version of Cygwin). When using this emulation layer under stress, e.g.
when running massively-parallel tests, unexplicable crashes occur quite
frequently, and instead of having a solution to the original problem, the
developer now has an additional, quite huge problem. For that reason, this
developer rejected `prove` as a solution and went with this patch instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1b4735d9f3 (submodule: no [--merge|--rebase] when newly cloned,
2011-02-17), all actions were defaulted to checkout for populating
a submodule initially, because merging or rebasing makes no sense
in that situation.
Other commands however do make sense, such as the custom command
that was added later (6cb5728c43, submodule update: allow custom
command to update submodule working tree, 2013-07-03).
I am unsure about the "none" command, as I can see an initial
checkout there as a useful thing. On the other hand going strictly
by our own documentation, we should do nothing in case of "none"
as well, because the user asked for it.
Reported-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider having a submodule 'sub' and a nested submodule at 'sub/nested'.
When nested is already absorbed into sub, but sub is not absorbed into
its superproject, then we need to fixup the gitfile and core.worktree
setting for 'nested' when absorbing 'sub', but we do not need to move
its git dir around.
Previously 'nested's gitfile contained "gitdir: ../.git/modules/nested";
it has to be corrected to "gitdir: ../../.git/modules/sub1/modules/nested".
An alternative I considered to do this work lazily, i.e. when resolving
"../.git/modules/nested", we would notice the ".git" being a gitfile
linking to another path. That seemed to be robuster by design, but harder
to get the implementation right. Maybe we have to do that anyway once we
try to have submodules and worktrees working nicely together, but for now
just produce 'correct' (i.e. direct) pointers.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future we want to support working tree operations within submodules,
e.g. "git checkout --recurse-submodules", which will update the submodule
to the commit as recorded in its superproject. In the submodule the
unpack-tree operation is carried out as usual, but the reporting to the
user needs to prefix any path with the superproject. The mechanism for
this is the super-prefix. (see 74866d757, git: make super-prefix option)
Add support for the super-prefix option for commands that unpack trees
by wrapping any path output in unpacking trees in the newly introduced
super_prefixed function. This new function prefixes any path with the
super-prefix if there is one. Assuming the submodule case doesn't happen
in the majority of the cases, we'd want to have a fast behavior for no
super prefix, i.e. no reallocation/copying, but just returning path.
Another aspect of introducing the `super_prefixed` function is to consider
who owns the memory and if this is the right place where the path gets
modified. As the super prefix ought to change the output behavior only and
not the actual unpack tree part, it is fine to be that late in the line.
As we get passed in 'const char *path', we cannot change the path itself,
which means in case of a super prefix we have to copy over the path.
We need two static buffers in that function as the error messages
contain at most two paths.
For testing purposes enable it in read-tree, which has no output
of paths other than an unpack-trees.c. These are all converted in
this patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
SZEDER Gábor
Junio C Hamano
Jeff King
Cornelius Weig
Matt McCutchen
Johannes Schindelin
Stefan Beller