| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "index-pack" dies due to incoming data exceeding the maximum
allowed input size, include the value of the limit in the error
message.
* mc/index-pack-report-max-size:
index-pack: clarify the breached limit
|
|
Usage-string normalization.
* ac/usage-string-fixups:
amend remaining usage strings according to style guide
|
|
Random test-framework clean-up.
* ab/test-leak-diag:
test-lib: add "fast_unwind_on_malloc=0" to LSAN_OPTIONS
test-lib: make $GIT_BUILD_DIR an absolute path
test-lib: correct and assert TEST_DIRECTORY overriding
test-lib: add GIT_SAN_OPTIONS, inherit [AL]SAN_OPTIONS
|
|
Test modernization.
* ab/hook-tests:
hook tests: use a modern style for "pre-push" tests
hook tests: test for exact "pre-push" hook input
|
|
A not-so-common mistake is to write a script to feed "git bisect
run" without making it executable, in which case all tests will
exit with 126 or 127 error codes, even on revisions that are marked
as good. Try to recognize this situation and stop iteration early.
* rs/bisect-executable-not-found:
bisect--helper: double-check run command on exit code 126 and 127
bisect: document run behavior with exit codes 126 and 127
bisect--helper: release strbuf and strvec on run error
bisect--helper: report actual bisect_state() argument on error
|
|
Further polishing of "git sparse-checkout".
* en/sparse-checkout-fixes:
sparse-checkout: reject arguments in cone-mode that look like patterns
sparse-checkout: error or warn when given individual files
sparse-checkout: pay attention to prefix for {set, add}
sparse-checkout: correctly set non-cone mode when expected
sparse-checkout: correct reapply's handling of options
|
|
Test modernization.
* cg/t3903-modernize:
tests: make the code more readable
tests: allow testing if a path is truly a file or a directory
t/t3903-stash.sh: replace test [-d|-f] with test_path_is_*
|
|
Add "fast_unwind_on_malloc=0" to LSAN_OPTIONS to get more meaningful
stack traces from LSAN. This isn't required under ASAN which will emit
traces such as this one for a leak in "t/t0006-date.sh":
$ ASAN_OPTIONS=detect_leaks=1 ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x488b94 in strdup (t/helper/test-tool+0x488b94)
#1 0x9444a4 in xstrdup wrapper.c:29:14
#2 0x5995fa in parse_date_format date.c:991:24
#3 0x4d2056 in show_dates t/helper/test-date.c:39:2
#4 0x4d174a in cmd__date t/helper/test-date.c:116:3
#5 0x4cce89 in cmd_main t/helper/test-tool.c:127:11
#6 0x4cd1e3 in main common-main.c:52:11
#7 0x7fef3c695e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#8 0x422b09 in _start (t/helper/test-tool+0x422b09)
SUMMARY: AddressSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Whereas LSAN would emit this instead:
$ ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f2be1d614aa in strdup string/strdup.c:42:15
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Now we'll instead git this sensible stack trace under
LSAN. I.e. almost the same one (but starting with "malloc", as is
usual for LSAN) as under ASAN:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f012af5c4aa in strdup string/strdup.c:42:15
#2 0x5cb164 in xstrdup wrapper.c:29:14
#3 0x495ee9 in parse_date_format date.c:991:24
#4 0x453aac in show_dates t/helper/test-date.c:39:2
#5 0x453782 in cmd__date t/helper/test-date.c:116:3
#6 0x451d95 in cmd_main t/helper/test-tool.c:127:11
#7 0x451f1e in main common-main.c:52:11
#8 0x7f012aef5e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#9 0x42e0a9 in _start (t/helper/test-tool+0x42e0a9)
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
As the option name suggests this does make things slower, e.g. for
t0001-init.sh we're around 10% slower:
$ hyperfine -L v 0,1 'LSAN_OPTIONS=fast_unwind_on_malloc={v} make T=t0001-init.sh' -r 3
Benchmark 1: LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh
Time (mean ± σ): 2.135 s ± 0.015 s [User: 1.951 s, System: 0.554 s]
Range (min … max): 2.122 s … 2.152 s 3 runs
Benchmark 2: LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh
Time (mean ± σ): 1.981 s ± 0.055 s [User: 1.769 s, System: 0.488 s]
Range (min … max): 1.941 s … 2.044 s 3 runs
Summary
'LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh' ran
1.08 ± 0.03 times faster than 'LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh'
I think that's more than worth it to get the more meaningful stack
traces, we can always provide LSAN_OPTIONS=fast_unwind_on_malloc=0 for
one-off "fast" runs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct a misleading comment added by me in 62f539043c7 (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c7 and
85176d72513 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
1. https://lore.kernel.org/git/220222.86o82z8als.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
LSAN_OPTIONS=report_objects=1:abort_on_error=0 ./t0006-date.sh
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e1 (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and
85b81b35ff9 (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug (some) memory leaks around parse_date_format().
* ab/date-mode-release:
date API: add and use a date_mode_release()
date API: add basic API docs
date API: provide and use a DATE_MODE_INIT
date API: create a date.h, split from cache.h
cache.h: remove always unused show_date_human() declaration
|
|
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
|
|
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
|
|
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
|
|
Further tweaks on progress API.
* ab/only-single-progress-at-once:
pack-bitmap-write.c: don't return without stop_progress()
progress API: unify stop_progress{,_msg}(), fix trace2 bug
progress.c: refactor stop_progress{,_msg}() to use helpers
progress.c: use dereferenced "progress" variable, not "(*p_progress)"
progress.h: format and be consistent with progress.c naming
progress.c tests: test some invalid usage
progress.c tests: make start/stop commands on stdin
progress.c test helper: add missing braces
leak tests: fix a memory leak in "test-progress" helper
|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
Error output given in response to an ambiguous object name has been
improved.
* ab/ambiguous-object-name:
object-name: re-use "struct strbuf" in show_ambiguous_object()
object-name: iterate ambiguous objects before showing header
object-name: show date for ambiguous tag objects
object-name: make ambiguous object output translatable
object-name: explicitly handle bad tags in show_ambiguous_object()
object-name: explicitly handle OBJ_BAD in show_ambiguous_object()
object-name tests: add tests for ambiguous object blind spots
|
|
As a small courtesy to users, report what limit was breached. This
is especially useful when a push exceeds a server-defined limit, since
the user is unlikely to have configured the limit (their host did).
Also demonstrate the human-readable message in a test.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --graph --graph" used to leak a graph structure, and there
was no way to countermand "--graph" that appear earlier on the
command line. A "--no-graph" option has been added and resource
leakage has been plugged.
* ah/log-no-graph:
log: add a --no-graph option
log: fix memory leak if --graph is passed multiple times
|
|
Fix tests that are unnecessarily specific to ref-files backend.
* hw/t1410-adjust-test-for-reftable:
t1410: mark bufsize boundary test as REFFILES
t1410: use test-tool ref-store to inspect reflogs
|
|
Test modernization.
* sy/t0001-use-path-is-helper:
t0001: replace "test [-d|-f]" with test_path_is_* functions
|
|
Replace the parsing of the output of "ls -l" by test_path_is_symlink() and
test_readlink().
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add test_path_is_file_not_symlink(), test_path_is_dir_not_symlink()
and test_path_is_symlink(). Case of use for the first one
in test t/t3903-stash.sh to replace "test -f" because that function
explicitly want the file not to be a symlink.
Give more friendly error message.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use test_path_is_* to replace test [-d|-f] because that give more
explicit debugging information. And it doesn't change the semantics.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usage strings for git (sub)command flags has a style guide that
suggests - first letter should not capitalized (unless required)
and it should skip full-stop at the end of line. But there are
some files where usage-strings do not follow the above mentioned
guide.
Amend the usage strings that don't follow the style convention/guide.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In sparse-checkout add/set under cone mode, the arguments passed are
supposed to be directories rather than gitignore-style patterns.
However, given the amount of effort spent in the manual discussing
patterns, it is easy for users to assume they need to pass patterns such
as
/foo/*
or
!/bar/*/
or perhaps they really do ignore the directory rule and specify a
random gitignore-style pattern like
*.c
To help catch such mistakes, throw an error if any of the positional
arguments:
* starts with any of '/!'
* contains any of '*?[]'
Inform users they can pass --skip-checks if they have a directory that
really does have such special characters in its name. (We exclude '\'
because of sparse-checkout's special handling of backslashes; see
the MINGW test in t1091.46.)
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set and add subcommands accept multiple positional arguments.
The meaning of these arguments differs slightly in the two modes:
Cone mode only accepts directories. If given a file, it would
previously treat it as a directory, causing not just the file itself to
be included but all sibling files as well -- likely against users'
expectations. Throw an error if the specified path is a file in the
index. Provide a --skip-checks argument to allow users to override
(e.g. for the case when the given path IS a directory on another
branch).
Non-cone mode accepts general gitignore patterns. There are many
reasons to avoid this mode, but one possible reason to use it instead of
cone mode: to be able to select individual files within a directory.
However, if a file is passed to set/add in non-cone mode, you won't be
selecting a single file, you'll be selecting a file with the same name
in any directory. Thus users will likely want to prefix any paths they
specify with a leading '/' character; warn users if the patterns they
specify exactly name a file because it means they are likely missing
such a leading slash.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, non-option arguments to set & add are clearly paths, and
as such, we should pay attention to prefix.
In non-cone mode, it is not clear that folks intend to provide paths
since the inputs are gitignore-style patterns. Paying attention to
prefix would prevent folks from doing things like
git sparse-checkout add /.gitattributes
git sparse-checkout add '/toplevel-dir/*'
In fact, the former will result in
fatal: '/.gitattributes' is outside repository...
while the later will result in
fatal: Invalid path '/toplevel-dir': No such file or directory
despite the fact that both are valid gitignore-style patterns that would
select real files if added to the sparse-checkout file. This might lead
people to just use the path without the leading slash, potentially
resulting in them grabbing files with the same name throughout the
directory hierarchy contrary to their expectations. See also [1] and
[2]. Adding prefix seems to just be fraught with error; so for now
simply throw an error in non-cone mode when sparse-checkout set/add are
run from a subdirectory.
[1] https://lore.kernel.org/git/e1934710-e228-adc4-d37c-f706883bd27c@gmail.com/
[2] https://lore.kernel.org/git/CABPp-BHXZ-XLxY0a3wCATfdq=6-EjW62RzbxKAoFPeXfJswD2w@mail.gmail.com/
Helped-by: Junio Hamano <gitster@pobox.com>
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 4e256731d6 ("sparse-checkout: enable reapply to take
--[no-]{cone,sparse-index}", 2021-12-14) made it so that reapply could
take additional options but added no tests. Tests would have shown that
the feature doesn't work because the initial values are set AFTER
parsing the command line options instead of before. Add a test and set
the initial value at the appropriate time.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Indent the here-docs and use "test_cmp" instead of "diff" in tests
added in ec55559f937 (push: Add support for pre-push hooks,
2013-01-13). Let's also use the more typical "expect" instead of
"expected" to be consistent with the rest of the test file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the tests added in ec55559f937 (push: Add support for pre-push
hooks, 2013-01-13) to exhaustively test for the exact input we're
expecting. This ensures that we e.g. don't miss a trailing newline.
Appending to a file called "actual" is the established convention in
this test for hooks, see the rest of the tests added in
ec55559f937 (push: Add support for pre-push hooks, 2013-01-13). Let's
follow that convention here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test modernization.
* jd/t0015-modernize:
t/t0015-hash.sh: remove unnecessary '\' at line end
|
|
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
|
|
When there is no object to write .bitmap file for, "git
multi-pack-index" triggered an error, instead of just skipping,
which has been corrected.
* tb/midx-no-bitmap-for-no-objects:
midx: prevent writing a .bitmap without any objects
|
|
* ab/release-transport-ls-refs-options:
ls-remote & transport API: release "struct transport_ls_refs_options"
|
|
Trivial leakfix.
* ab/hash-object-leakfix:
hash-object: fix a trivial leak in --path
|
|
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
|
|
Conditional test update.
* ab/t0051-skip-on-non-windows:
t0051: use "skip_all" under !MINGW in single-test file
|
|
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
|
|
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
|
|
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
|
|
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
|
|
Style updates on a test script helper.
* sy/modernize-t-lib-read-tree-m-3way:
t/lib-read-tree-m-3way: indent with tabs
t/lib-read-tree-m-3way: modernize style
|
|
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
|
|
"git log" and friends learned an option --exclude-first-parent-only
to propagate UNINTERESTING bit down only along the first-parent
chain, just like --first-parent option shows commits that lack the
UNINTERESTING bit only along the first-parent chain.
* jz/rev-list-exclude-first-parent-only:
git-rev-list: add --exclude-first-parent-only flag
|
|
Unlike "git apply", "git patch-id" did not handle patches with
hunks that has only 1 line in either preimage or postimage, which
has been corrected.
* jz/patch-id-hunk-header-parsing-fix:
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
patch-id: fix antipatterns in tests
|
|
Prepare more test scripts for the introduction of reftable.
* hn/reftable-tests:
t5312: prepare for reftable
t1405: mark test that checks existence as REFFILES
t1405: explictly delete reflogs for reftable
|
|
Git.pm update.
* ab/do-not-hide-failures-in-git-dot-pm:
perl Git.pm: don't ignore signalled failure in _cmd_close()
|
|
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Matt Cooper
COGONI Guillaume
Abhradeep Chakraborty
Elijah Newren