| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current wildmatch() call for includeIf's gitdir pattern does not
pass the WM_PATHNAME flag. Without this flag, '*' is treated _almost_
the same as '**' (because '*' also matches slashes) with one exception:
'/**/' can match a single slash. The pattern 'foo/**/bar' matches
'foo/bar'.
But '/*/', which is essentially what wildmatch engine sees without
WM_PATHNAME, has to match two slashes (and '*' matches nothing). Which
means 'foo/*/bar' cannot match 'foo/bar'. It can only match 'foo//bar'.
The result of this is the current wildmatch() call works most of the
time until the user depends on '/**/' matching no path component. And
also '*' matches slashes while it should not, but people probably
haven't noticed this yet. The fix is straightforward.
Reported-by: Jason Karns <jason.karns@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test portability fix.
* ab/bsd-fixes:
commit-graph tests: fix unportable "dd" invocation
tests: fix unportable "\?" and "\+" regex syntax
|
|
* ab/workaround-dash-bug-in-test:
tests: avoid syntax triggering old dash bug
|
|
Change an unportable invocation of "dd" with count=0, that wanted to
truncate the commit-graph file. In POSIX it is unspecified what
happens when count=0 is provided[1]. The NetBSD "dd" behavior
differs from GNU (and seemingly other BSDs), which has left this test
broken since d2b86fbaa1 ("commit-graph: fix buffer read-overflow",
2019-01-15).
Copying from /dev/null would seek/truncate to seek=$zero_pos and
stop immediately after that (without being able to copy anything),
which is the right way to truncate the file.
1. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/dd.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix widely supported but non-POSIX basic regex syntax introduced in
[1] and [2]. On GNU, NetBSD and FreeBSD the following works:
$ echo xy >f
$ grep 'xy\?' f; echo $?
xy
0
The same goes for "\+". The "?" and "+" syntax is not in the BRE
syntax, just in ERE, but on some implementations it can be invoked by
prefixing the meta-operator with "\", but not on OpenBSD:
$ uname -a
OpenBSD obsd.my.domain 6.2 GENERIC#132 amd64
$ grep --version
grep version 0.9
$ grep 'xy\?' f; echo $?
1
Let's fix this by moving to ERE syntax instead, where "?" and "+" are
universally supported:
$ grep -E 'xy?' f; echo $?
xy
0
1. 2ed5c8e174 ("describe: setup working tree for --dirty", 2019-02-03)
2. c801170b0c ("t6120: test for describe with a bare repository",
2019-02-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/test-tool-gen-nuls:
tests: teach the test-tool to generate NUL bytes and use it
|
|
* mk/t5562-no-input-to-too-large-an-input-test:
t5562: do not depend on /dev/zero
Revert "t5562: replace /dev/zero with a pipe from generate_zero_bytes"
|
|
Some expected failures of git-http-backend leaves running its children
(receive-pack or upload-pack) which still hold opened descriptors
to act.err and with some probability they live long enough to write
there their failure messages after next test has already truncated
the files. This causes occasional failures of the test script.
Avoid the issue by using separated output and error file for each test,
apprending the test number to their name.
Reported-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was reported [1] that NonStop platform does not have /dev/zero.
The test uses /dev/zero as a dummy input. Passing case (http-backed
failed because of too big input size) should not be reading anything
from it. If http-backend would erroneously try to read any data
returning EOF probably would be even safer than providing some
meaningless data.
Replace /dev/zero with /dev/null to avoid issues with platforms which do
not have /dev/zero.
[1] https://public-inbox.org/git/20190209185930.5256-4-randall.s.becker@rogers.com/
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Revert cc95bc20 ("t5562: replace /dev/zero with a pipe from
generate_zero_bytes", 2019-02-09), as not feeding anything to the
command is a better way to test it.
|
|
* jc/no-grepping-for-strerror-in-tests:
t1404: do not rely on the exact phrasing of strerror()
|
|
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
t/lib-httpd: pass GIT_TEST_SIDEBAND_ALL through Apache
|
|
07c3c2aa16 ("tests: define GIT_TEST_SIDEBAND_ALL", 2019-01-16) added
GIT_TEST_SIDEBAND_ALL to the apache.conf PassEnv list. Avoid warnings
from Apache when the variable is unset, as we do for GIT_VALGRIND* and
GIT_TRACE, from f628825481 ("t/lib-httpd: handle running under
--valgrind", 2012-07-24) and 89c57ab3f0 ("t: pass GIT_TRACE through
Apache", 2015-03-13), respectively.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not even in C locale, it is wrong to expect that the exact phrasing
"File exists" is used to show EEXIST.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/rebase-test-fix:
rebase: fix regression in rebase.useBuiltin=false test mode
|
|
* rb/no-dev-zero-in-test:
t5562: replace /dev/zero with a pipe from generate_zero_bytes
t5318: replace use of /dev/zero with generate_zero_bytes
test-lib-functions.sh: add generate_zero_bytes function
|
|
Test improvement.
* sg/stress-test:
test-lib: fix non-portable pattern bracket expressions
test-lib: make '--stress' more bisect-friendly
|
|
Test fix.
* kd/t0028-octal-del-is-377-not-777:
t0028: fix wrong octal values for BOM in setup
|
|
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
1. https://public-inbox.org/git/xmqqva1nbeno.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid a bug in dash that's been fixed ever since its
ec2c84d ("[PARSER] Fix clobbering of checkkwd", 2011-03-15)[1] first
released with dash v0.5.7 in July 2011. This failing test was
introduced in 5f9674243d ("config: add --expiry-date", 2017-11-18).
This fixes 1/2 tests failing on Debian Lenny & Squeeze. The other
failure is due to 1b42f45255 ("git-svn: apply "svn.pathnameencoding"
before URL encoding", 2016-02-09).
The dash bug is triggered by this test because the heredoc contains a
command embedded in "$()" with a "{}" block coming right after
it. Refactoring the "$()" to e.g. be a variable that was set earlier
will also work around it, but let's instead break up the "EOF" and the
"{}".
An earlier version of this patch[2] mitigated the issue by breaking
the "$()" out of the "{}" block, that worked, but just because it
broke up the "EOF" and "{}" block. Putting e.g. "echo &&" between the
two would also work.
1. https://git.kernel.org/pub/scm/utils/dash/dash.git/
2. https://public-inbox.org/git/20181127164253.9832-1-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To help platforms that lack /dev/zero (e.g. NonStop), replace use
of /dev/zero to feed "git http-backend" with a pipe of output from
the generate_zero_bytes helper.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are platforms (e.g. NonStop) that lack /dev/zero; use the
generate_zero_bytes helper we just introduced to append stream
of NULs at the end of the file.
The original, even though it uses "dd seek=... count=..." to make it
look like it is overwriting the middle part of an existing file, has
truncated the file before this step with another use of "dd", which
may make it tricky to see why this rewrite is a correct one.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t5318 and t5562 used /dev/zero, which is not portable. This function
provides both a fixed block of NUL bytes and an infinite stream of NULs.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When serializing UTF-16 (and UTF-32), there are three possible ways to
write the stream. One can write the data with a BOM in either big-endian
or little-endian format, or one can write the data without a BOM in
big-endian format.
Most systems' iconv implementations choose to write it with a BOM in
some endianness, since this is the most foolproof, and it is resistant
to misinterpretation on Windows, where UTF-16 and the little-endian
serialization are very common. For compatibility with Windows and to
avoid accidental misuse there, Git always wants to write UTF-16 with a
BOM, and will refuse to read UTF-16 without it.
However, musl's iconv implementation writes UTF-16 without a BOM,
relying on the user to interpret it as big-endian. This causes t0028 and
the related functionality to fail, since Git won't read the file without
a BOM.
Add a Makefile and #define knob, ICONV_OMITS_BOM, that can be set if the
iconv implementation has this behavior. When set, Git will write a BOM
manually for UTF-16 and UTF-32 and then force the data to be written in
UTF-16BE or UTF-32BE. We choose big-endian behavior here because the
tests use the raw "UTF-16" encoding, which will be big-endian when the
implementation requires this knob to be set.
Update the tests to detect this case and write test data with an added
BOM if necessary. Always write the BOM in the tests in big-endian
format, since all iconv implementations that omit a BOM must use
big-endian serialization according to the Unicode standard.
Preserve the existing behavior for systems which do not have this knob
enabled, since they may use optimized implementations, including
defaulting to the native endianness, which may improve performance.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup code uses octal values with printf to generate a BOM for
UTF-16/32 BE/LE. It specifically uses '\777' to emit a 0xff byte. This
relies on the fact that most shells truncate the value above 0o377.
Ash however interprets '\777' as '\77' + a literal '7', resulting in an
invalid BOM.
Fix this by using the proper value of 0xff: '\377'.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a '!' character to start a non-matching pattern bracket
expression, as specified by POSIX in Shell Command Language section
2.13.1 Patterns Matching a Single Character [1].
I used '^' instead in three places in the previous three commits, to
verify that the arguments of the '--stress=' and '--stress-limit='
options and the values of various '*_PORT' environment variables are
valid numbers. With certain shells, at least with dash (upstream and
in Ubuntu 14.04) and mksh, this led to various undesired behaviors:
# error message in case of a valid number
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=8
error: --stress=<N> requires the number of jobs to run
# not the expected error message
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=foo
./t3903-stash.sh: 238: test: Illegal number: foo
# no error message at all?!
$ mksh ./t3903-stash.sh --stress=foo
$ echo $?
0
Some other shells, e.g. Bash (even in posix mode), ksh, dash in Ubuntu
16.04 or later, are apparently happy to accept '^' just as well.
[1] http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_13
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A flakey "p4" test has been removed.
* ld/git-p4-remove-flakey-test:
git-p4: remove ticket expiry test
|
|
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
|
|
Some errors from the other side coming over smart HTTP transport
were not noticed, which has been corrected.
* js/smart-http-detect-remote-error:
t5551: test server-side ERR packet
remote-curl: tighten "version 2" check for smart-http
remote-curl: refactor smart-http discovery
|
|
Test fix.
* tz/gpg-test-fix:
t/lib-gpg: drop redundant killing of gpg-agent
t/lib-gpg: quote path to ${GNUPGHOME}/trustlist.txt
|
|
Test fix.
* os/rebase-runs-post-checkout-hook:
t5403: correct bash ambiguous redirect error in subtest 8 by quoting $GIT_DIR
|
|
Let's suppose that a test somehow becomes flaky between 'master' and
'pu', and tends to fail within the first 50 repetitions when run with
'--stress'. In such a case we could use 'git bisect' to find the
culprit: if the test script fails with '--stress', then the commit is
definitely bad, but if it survives, say, 300 repetitions, then we could
consider it good with reasonable confidence.
Unfortunately, all this could only be done manually, because
'--stress' would run the test script repeatedly for all eternity on a
good commit, and it would exit with success even when it found a
failure on a bad commit.
So let's make '--stress' usable with 'git bisect run':
- Make it exit with failure if a failure is found.
- Add the '--stress-limit=<N>' option to repeat the test script
at most N times in each of the parallel jobs, and exit with
success when the limit is reached.
And then we could simply run something like:
$ git bisect start origin/pu master
$ git bisect run sh -c 'make && cd t &&
./t1234-foo.sh --stress --stress-limit=300'
Sure, as a brand new feature it won't be any useful right now, but in
a release or three most cooking topics will already contain this, so
we could automatically bisect at least newly introduced flakiness.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The embedded blanks in the full path of the test git repository cased bash
to generate an ambugious redirect error.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 53fc999306 ("gpg-interface t: extend the existing GPG tests with
GPGSM", 2018-07-20), the gpgconf call which kills gpg-agent was copied
from the existing gpg setup code.
The reason for killing gpg-agent is given in 29ff1f8f74 ("t: lib-gpg:
flush gpg agent on startup", 2017-07-20):
When running gpg-relevant tests, a gpg-daemon is spawned for each
GNUPGHOME used. This daemon may stay running after the test and cache
file descriptors for the trash directories, even after the trash
directory is removed. This leads to ENOENT errors when attempting to
create files if tests are run multiple times.
Add a cleanup script to force flushing the gpg-agent for that GNUPGHOME
(if any) before setting up the GPG relevant-environment.
Killing gpg-agent once per test is sufficient.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When gpgsm is installed, lib-gpg.sh attempts to update trustlist.txt to
relax the checking of some root certificate requirements. The path to
"${GNUPGHOME}" contains spaces which cause an "ambiguous redirect"
warning when bash is used to run the tests:
$ bash t7030-verify-tag.sh
/git/t/lib-gpg.sh: line 66: ${GNUPGHOME}/trustlist.txt: ambiguous redirect
ok 1 - create signed tags
ok 2 # skip create signed tags x509 (missing GPGSM)
...
No warning is issued when using bash called as /bin/sh, dash, or mksh.
Quote the path to ensure the redirect works as intended and sets the
GPGSM prereq. While we're here, drop the space after ">>".
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
|
|
Code clean-up.
* jk/loose-object-cache-oid:
prefer "hash mismatch" to "sha1 mismatch"
sha1-file: avoid "sha1 file" for generic use in messages
sha1-file: prefer "loose object file" to "sha1 file" in messages
sha1-file: drop has_sha1_file()
convert has_sha1_file() callers to has_object_file()
sha1-file: convert pass-through functions to object_id
sha1-file: modernize loose header/stream functions
sha1-file: modernize loose object file functions
http: use struct object_id instead of bare sha1
update comment references to sha1_object_info()
sha1-file: fix outdated sha1 comment references
|
|
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
|
|
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
|
|
The documentation of "git commit-tree" said that the command
understands "--gpg-sign" in addition to "-S", but the command line
parser did not know about the longhand, which has been corrected.
* br/commit-tree-fully-spelled-gpg-sign-option:
commit-tree: add missing --gpg-sign flag
t7510: invoke git as part of &&-chain
|
|
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
|
|
The test lint learned to catch non-portable "sed" options.
* tb/test-lint-sed-options:
test-lint: only use only sed [-n] [-e command] [-f command_file]
|
|
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
|
|
Code cleanup.
* jk/unused-parameter-cleanup:
convert: drop path parameter from actual conversion functions
convert: drop len parameter from conversion checks
config: drop unused parameter from maybe_remove_section()
show_date_relative(): drop unused "tz" parameter
column: drop unused "opts" parameter in item_length()
create_bundle(): drop unused "header" parameter
apply: drop unused "def" parameter from find_name_gnu()
match-trees: drop unused path parameter from score functions
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
More code in "git bisect" has been rewritten in C.
* tt/bisect-in-c:
bisect--helper: `bisect_start` shell function partially in C
bisect--helper: `get_terms` & `bisect_terms` shell function in C
bisect--helper: `bisect_next_check` shell function in C
bisect--helper: `check_and_set_terms` shell function in C
wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
bisect--helper: `bisect_write` shell function in C
bisect--helper: `bisect_reset` shell function in C
|
|
A new encoding UTF-16LE-BOM has been invented to force encoding to
UTF-16 with BOM in little endian byte order, which cannot be directly
generated by using iconv.
* tb/utf-16-le-with-explicit-bom:
Support working-tree-encoding "UTF-16LE-BOM"
|
|
"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.
* dt/cat-file-batch-ambiguous:
t1512: test ambiguous cat-file --batch and --batch-output
Do not print 'dangling' for cat-file in case of ambiguity
|
|
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Ævar Arnfjörð Bjarmason
Max Kirillov
Johannes Schindelin
Todd Zullinger
Randall S. Becker
brian m. carlson
Kevin Daudt
SZEDER Gábor