| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The t1301-shared-repo.sh testscript uses /usr/bin/stat to get the file
mode, which isn't portable. Implement the test in shell using 'ls' as
shown by Junio.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a stop-gap to work around problem with git-init without
intrusive changes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
GIT 1.5.2.5
git-add -u paths... now works from subdirectory
Fix "git add -u" data corruption.
|
|
git-add -u also takes the path limiters, but unlike the
command without the -u option, the code forgot that it
could be invoked from a subdirectory, and did not correctly
handle the prefix.
Signed-off-by: Salikh Zakirov <salikh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This applies to 'maint' to fix a rather serious data corruption
issue. When "git add -u" affects a subdirectory in such a way
that the only changes to its contents are path removals, the
next tree object written out of that index was bogus, as the
remove codepath forgot to invalidate the cache-tree entry.
Reported by Salikh Zakirov.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running git-svn log <ref> -r<rev> against a <ref> other than the
current HEAD did not work if the <rev> was exclusive to the
other branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes .gitattributes files to be read from the index when
they are not checked out to the work tree. This is in line with
the way we always allowed low-level tools to operate in sparsely
checked out work tree in a reasonable way.
It swaps the order of new file creation and converting the blob
to work tree representation; otherwise when we are in the middle
of checking out .gitattributes we would notice an empty but
unwritten .gitattributes file in the work tree and will ignore
the copy in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you try to merge a path that involves binary file-level
merge, merge-recursive died rudely without cleaning up its own
mess. A files added by the merge were left in the working tree,
but the index was not written out (because it just punted and
died), so it was cumbersome for the user to retry it by first
running "git reset --hard".
This changes merge-recursive to still warn but do the "binary"
merge for such a path; leave the "our" version in the working
tree, but still keep the path unmerged so that the user can sort
it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows / cygwin don't support HT, LF, or TAB in file name so this test
is meaningless there.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Here-text to create fake-editor did not use <<\EOF but <<EOF,
but there was no point doing so, as it quoted all the variables
anyway. Simplify it.
Also futureproof the special mode to edit COMMIT_EDITMSG file;
it is interested in editing the COMMIT_EDITMSG file in any
GIT_DIR; GIT_DIR may be given as an absolute path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
|
|
* jc/clone:
git-clone: aggressively optimize local clone behaviour.
connect: accept file:// URL scheme
|
|
While "git bundle" was a useful way to sneakernet incremental
changes, we did not allow:
$ git bundle create v2.6.20.bndl v2.6.20
to create a bundle that contains the whole history to a
well-known good revision. Such a bundle can be mirrored
everywhere, and people can prime their repository with it to
reduce the load on the repository that serves near the tip of
the development.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old behaviour was to unilaterally default to the cwd is the work tree
when GIT_DIR was set, but GIT_WORK_TREE wasn't, no matter if we are inside
the GIT_DIR, or if GIT_DIR is actually something like ../../../.git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The hashed contents did not matter in the end result, but it passed
an uninitialized variable to printf, which caused it to emit empty
while giving an error/usage message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling "git rebase -i <upstream> <branch>", git should switch
to <branch> first. This worked before, but I broke it by my
"Shut git rebase -i up" patch.
Fix that, and add a test to make sure that it does not break again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: adjusted t/t7501 as this makes -F and --amend compatible]
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Non-interactive rebase had this from the beginning -- match it by
using --cherry-pick option to rev-list.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check for non-0 exit code if the confiog file does not exist and
if it works exactly like when setting GIT_CONFIG.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes rebase/am keep the original commit log message
better, even when it does not conform to "single line paragraph
to say what it does, then explain and defend why it is a good
change in later paragraphs" convention.
This change is a two-edged sword. While the earlier behaviour
would make such commit log messages more friendly to readers who
expect to get the birds-eye view with oneline summary formats,
users who primarily use git as a way to interact with foreign
SCM systems would not care much about the convenience of oneline
git log tools, but care more about preserving their own
convention. This changes their commits less useful to readers
who read them with git tools while keeping them more consistent
with the foreign SCM systems they interact with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bs/lock:
Add test for symlinked configuration file updates.
use lockfile.c routines in git_commit_set_multivar()
fully resolve symlinks when creating lockfiles
|
|
The tree recursion behavior of git-diff may appear
inconsistent to the user because it depends on the format of
the patch as well as whether one is diffing between trees or
against the index.
Since git-diff is a porcelain wrapper for low-level diff
commands, it makes sense for its behavior to be consistent
no matter what is being diffed. This patch turns on
recursion in all cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify and make more readable validation of 'opt' (extra options)
parameter, using exists($hash{key}) instead of grepping keys of a hash
for value.
Move 'opt' parameter to be the last (for now) in the URL.
Make use of '--no-merges' extra option ('opt') by adding "no merges"
RSS and Atom feeds to the HTML header. Note that alternate format
links in the RSS and Atom views do not use '--no-merges' option yet!
Adds tests for the 'opt' parameter to t9500-gitweb-standalone-no-errors.sh
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a squashing merge failed, the first commit would not be replaced,
due to "git reset --soft" being called with an unmerged index.
Noticed by Uwe Kleine-König.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With --strip-comments (or short -s), git stripspace now removes lines
beginning with a '#', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We say "SUBDIRECTORY_OK" but we did not chdir to toplevel; this
is fine as long as everything we use can be started from a
subdirectory, but unfortunately "merge-recursive" is not one of
the programs you can safely use from a subdirectory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CVS/Entries file can contain a line with single D to say "this
directory does not have any subdirectories". Do not get
confused with such an entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are useful in organizations that enforce particular formats
for commit messages, e.g., to specify bug IDs or test plans.
Use of the template is not enforced; it is simply used as the
initial content when the editor is invoked.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to take the first non-option argument as the name for the new
branch. This syntax is not extensible to support rewriting more than just
HEAD.
Instead, we now have the following syntax:
git filter-branch [<filter options>...] [<rev-list options>]
All positive refs given in <rev-list options> are rewritten. Yes,
in-place. If a ref was changed, the original head is stored in
refs/original/$ref now, for your inspecting pleasure, in addition to the
reflogs (since it is easier to inspect "git show-ref | grep original" than
to inspect all the reflogs).
This commit also adds the --force option to remove .git-rewrite/ and all
refs from refs/original/ before filtering.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A repeated call to read_sha1_file was not freing memory
when the buffer was allocated but returned size was zero.
Also, now the program does not allow many -F or -m options,
which was a bug too because it was not freing the memory
allocated for any previous -F or -m options.
Tests are provided for ensuring that only one option
-F or -m is given. Also, another test is shipped here,
to check that "git tag" fails when a non-existing file
is passed to the -F option, something that git-tag.sh
allowed creating the tag with an empty message.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes you want to squash more than two commits. Before this patch,
the editor was fired up for each squash command. Now the editor is
started only with the last squash command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular, when moving back to a commit without a given submodule
and then moving back forward to a commit with the given submodule,
we shouldn't complain that updating would lose untracked file in
the submodule, because git currently does not checkout subprojects
during superproject check-out.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Renaming files with non-URI friendly characters caused
breakage when committing to DAV repositories (over http(s)).
Even if I try leaving out the $self->{url} from the return value
of url_path(), a partial (without host), unescaped path name
does not work.
Filenames for DAV repos need to be URI-encoded before being
passed to the library. Since this bug did not affect file://
and svn:// repos, the git-svn test library needed to be expanded
to include support for starting Apache with mod_dav_svn enabled.
This new test is not enabled by default, but can be enabled by
setting SVN_HTTPD_PORT to any available TCP/IP port on
127.0.0.1.
Additionally, for running this test, the following variables
(with defaults shown) can be changed for the suitable system.
The default values are set for Debian systems:
SVN_HTTPD_MODULE_PATH=/usr/lib/apache2/modules
SVN_HTTPD_PATH=/usr/sbin/apache2
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of git://repo.or.cz/git/fastimport:
Teach fast-import to recursively copy files/directories
Fix git-p4 on Windows to not use the Posix sysconf function.
Correct trivial typo in fast-import documentation
|
|
Some source material (e.g. Subversion dump files) perform directory
renames by telling us the directory was copied, then deleted in the
same revision. This makes it difficult for a frontend to convert
such data formats to a fast-import stream, as all the frontend has
on hand is "Copy a/ to b/; Delete a/" with no details about what
files are in a/, unless the frontend also kept track of all files.
The new 'C' subcommand within a commit allows the frontend to make a
recursive copy of one path to another path within the branch, without
needing to keep track of the individual file paths. The metadata
copy is performed in memory efficiently, but is implemented as a
copy-immediately operation, rather than copy-on-write.
With this new 'C' subcommand frontends could obviously implement an
'R' (rename) on their own as a combination of 'C' and 'D' (delete),
but since we have already offered up 'R' in the past and it is a
trivial thing to keep implemented I'm not going to deprecate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In the previous behavior, "git-rm --cached" (without -f) had the same
restriction as "git-rm". This forced the user to use the -f flag in
situations which weren't actually dangerous, like:
$ git add foo # oops, I didn't want this
$ git rm --cached foo # back to initial situation
Previously, the index had to match the file *and* the HEAD. With
--cached, the index must now match the file *or* the HEAD. The behavior
without --cached is unchanged, but provides better error messages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
GIT 1.5.2.4
Teach read-tree 2-way merge to ignore intermediate symlinks
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
git-gui: Don't linewrap within console windows
git-gui: Correct ls-tree buffering problem in browser
git-gui: Skip nicknames when selecting author initials
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
git-gui: Unlock the index when cancelling merge dialog
git-gui: properly popup error if gitk should be started but is not installed
|
Arjen Laarhoven
Junio C Hamano
Sven Verdoolaege
Salikh Zakirov
Eric Wong
David Kastrup
Brian Gernhardt
Mark Levedahl
Alexandre Julliard
Johannes Schindelin
Kristian Høgsberg
Alex Riesen
Jeff King
Jakub Narebski
Steven Grimm
Carlos Rica
Adam Roben
Emil Medve
Shawn O. Pearce
Matthieu Moy