| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The exact byte count of the delta base file is important.
The test-delta helper will feed it to patch_delta(), which
will barf if it doesn't match the size byte given in the
delta. Using "echo" may end up with unexpected line endings
on some platforms (e.g,. "\r\n" instead of just "\n").
This actually wouldn't cause the test to fail (since we
already expect test-delta to complain about these bogus
deltas), but would mean that we're not exercising the code
we think we are.
Let's use printf instead (which we already trust to give us
byte-perfect output when we generate the deltas).
While we're here, let's tighten the 5-byte result size used
in the "truncated copy parameters" test. This just needs to
have enough room to attempt to parse the bogus copy command,
meaning 2 is sufficient. Using 5 was arbitrary and just
copied from the base size; since those no longer match, it's
simply confusing. Let's use a more meaningful number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we see a delta command instructing us to copy bytes
from the base, we have to read the offset and size from the
delta stream. We do this without checking whether we're at
the end of the stream, meaning we may read past the end of
the buffer.
In practice this isn't exploitable in any interesting way
because:
1. Deltas are always in packfiles, so we have at least a
20-byte trailer that we'll end up reading.
2. The worst case is that we try to perform a nonsense
copy from the base object into the result, based on
whatever was in the pack stream next. In most cases
this will simply fail due to our bounds-checks against
the base or the result.
But even if you carefully constructed a pack stream for
which it succeeds, it wouldn't perform any delta
operation that you couldn't have simply included in a
non-broken form.
But obviously it's poor form to read past the end of the
buffer we've been given. Unfortunately there's no easy way
to do a single length check, since the number of bytes we
need depends on the number of bits set in the initial
command byte. So we'll just check each byte as we parse. We
can hide the complexity in a macro; it's ugly, but not as
ugly as writing out each individual conditional.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying a delta, if we see an opcode that cannot be
fulfilled (e.g., asking to write more bytes than the
destination has left), we break out of our parsing loop but
don't signal an explicit error. We rely on the sanity check
after the loop to see if we have leftover delta bytes or
didn't fill our result buffer.
This can silently ignore corruption when the delta buffer
ends with a bogus command and the destination buffer is
already full. Instead, let's jump into the error handler
directly when we see this case.
Note that the tests also cover the "bad opcode" case, which
already handles this correctly.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `cmd` is in the range [0x01,0x7f] and `cmd > top-data`, the
`memcpy(out, data, cmd)` can copy out-of-bounds data from after `delta_buf`
into `dst_buf`.
This is not an exploitable bug because triggering the bug increments the
`data` pointer beyond `top`, causing the `data != top` sanity check after
the loop to trigger and discard the destination buffer - which means that
the result of the out-of-bounds read is never used for anything.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't have any tests that specifically check boundary
cases in patch_delta(). It obviously gets exercised by tests
which read from packfiles, but it's hard to create packfiles
with bogus deltas.
So let's cover some obvious boundary cases:
1. commands that overflow the result buffer
a. literal content from the delta
b. copies from a base
2. commands where the source isn't large enough
a. literal content from a truncated delta
b. copies that need more bytes than the base has
3. copy commands who parameters are truncated
And indeed, we have problems with both 2a and 3. I've marked
these both as expect_failure, though note that because they
involve reading past the end of a buffer, they will
typically only be caught when run under valgrind or ASan.
There's one more test here, too, which just applies a basic
delta. Since all of the other tests expect failure and we
don't otherwise use "test-tool delta" in the test suite,
this gives a sanity check that the tool works at all.
These are based on an earlier patch by Jann Horn
<jannh@google.com>.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently read the input to test-delta by mmap()-ing it.
However, memory-checking tools like valgrind and ASan are
less able to detect reads/writes past the end of an mmap'd
buffer, because the OS is likely to give us extra bytes to
pad out the final page size. So instead, let's read into a
heap buffer.
As a bonus, this also makes it possible to write tests with
empty bases, as mmap() will complain about a zero-length
map.
This is based on a patch by Jann Horn <jannh@google.com>
which actually aligned the data at the end of a page, and
followed it with another page marked with mprotect(). That
would detect problems even without a tool like ASan, but it
was significantly more complex and may have introduced
portability problems. By comparison, this approach pushes
the complexity onto existing memory-checking tools.
Note that this could be done even more simply by using
strbuf_read_file(), but that would defeat the purpose:
strbufs generally overallocate (and at the very least
include a trailing NUL which we do not care about), which
would defeat most memory checkers.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* sg/test-rebase-editor-fix:
t/lib-rebase.sh: support explicit 'pick' commands in 'fake_editor.sh'
|
|
Test fixes.
* ab/test-must-be-empty-for-master:
t6018-rev-list-glob: fix 'empty stdin' test
|
|
Test fixes.
* sg/t3420-autostash-fix:
t3420-rebase-autostash: don't try to grep non-existing files
|
|
Test fixes.
* sg/t3903-missing-fix:
t3903-stash: don't try to grep non-existing file
|
|
Test fixes.
* sg/t7501-thinkofix:
t7501-commit: drop silly command substitution
|
|
Test fixes.
* sg/t0020-conversion-fix:
t0020-crlf: check the right file
|
|
Test fixes.
* sg/t4051-fix:
t4051-diff-function-context: read the right file
|
|
Dev tool update.
* jk/use-compat-util-in-test-tool:
test-tool.h: include git-compat-util.h
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
"git worktree" command learned "--quiet" option to make it less
verbose.
* ep/worktree-quiet-option:
worktree: add --quiet option
|
|
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
|
|
The verbose output of the test 'reword without issues functions as
intended' in 't3423-rebase-reword.sh', added in a9279c6785 (sequencer:
do not squash 'reword' commits when we hit conflicts, 2018-06-19),
contains the following error output:
sed: -e expression #1, char 2: extra characters after command
This error comes from within the 'fake-editor.sh' script created by
'lib-rebase.sh's set_fake_editor() function, and the root cause is the
FAKE_LINES="pick 1 reword 2" variable in the test in question, in
particular the "pick" word. 'fake-editor.sh' assumes 'pick' to be the
default rebase command and doesn't support an explicit 'pick' command
in FAKE_LINES. As a result, 'pick' will be used instead of a line
number when assembling the following 'sed' script:
sed -n picks/^pick/pick/p
which triggers the aforementioned error.
Luckily, this didn't affect the test's correctness: the erroring 'sed'
command doesn't write anything to the todo script, and processing the
rest of FAKE_LINES generates the desired todo script, as if that
'pick' command were not there at all.
The minimal fix would be to remove the 'pick' word from FAKE_LINES,
but that would leave us susceptible to similar issues in the future.
Instead, teach the fake-editor script to recognize an explicit 'pick'
command, which is still a fairly trivial change.
In the future we might want to consider reinforcing this fake editor
script with an &&-chain and stricter parsing of the FAKE_LINES
variable (e.g. to error out when encountering unknown rebase commands
or commands and line numbers in the wrong order).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several tests in 't3420-rebase-autostash.sh' start various rebase
processes that are expected to fail because of merge conflicts. These
tests then run '! grep' to ensure that the autostash feature did its
job, and the dirty contents of a file is gone. However, due to the
test repo's history and the choice of upstream branch that file
shouldn't exist in the conflicted state at all. Consequently, this
'grep' doesn't fail as expected, because it can't find the dirty
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding unexpected errors from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test 'store updates stash ref and reflog' in 't3903-stash.sh'
creates a stash from a new file, runs 'git reset --hard' to throw away
any modifications to the work tree, and then runs '! grep' to ensure
that the staged contents are gone. Since the file didn't exist
before, it shouldn't exist after 'git reset' either. Consequently,
this 'grep' doesn't fail as expected, because it can't find the staged
content, but it fails because it can't open the file.
Tighten this check by using 'test_path_is_missing' instead, thereby
avoiding an unexpected error from 'grep' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a recent update in 2.18 era, "git pack-objects" started
producing a larger than necessary packfiles by missing
opportunities to use large deltas.
* nd/pack-deltify-regression-fix:
pack-objects: fix performance issues on packing large deltas
|
|
Prior to d3c6751b18 (tests: make use of the test_must_be_empty
function, 2018-07-27), in the test 'rev-list should succeed with empty
output on empty stdin' in 't6018-rev-list-glob' the empty 'expect'
file served dual purpose: besides specifying the expected output, as
usual, it also served as empty input for 'git rev-list --stdin'.
Then d3c6751b18 came along, and, as part of the conversion to
'test_must_be_empty', removed this empty 'expect' file, not realizing
its secondary purpose. Redirecting stdin from the now non-existing
file failed the test, but since this test expects failure in the first
place, this issue went unnoticed.
Redirect 'git rev-list's stdin explicitly from /dev/null to provide
empty input. (Strictly speaking we don't need this redirection,
because the test script's stdin is already redirected from /dev/null
anyway, but I think it's better to be explicit about it.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test ' context does not include preceding empty lines' in the
block of tests 'change with long common tail and no context' in
't4051-diff-function-context.sh' tries to read the file
'long_common_tail.diff.diff', but that file doesn't exist as its name
contains one more '.diff' suffixes than necessary.
Despite this error the test still succeeded without checking what it's
supposed to, because this erroneous read is done on the line:
test "$(first_context_line <long_common_tail.diff.diff)" != " "
which means that:
- the command substitution hides the error, so it won't fail the
test, and
- the result of the command substitution is the empty string, which
is, of course, not equal to a single space character, so the
condition is fulfilled, and the test succeeds.
As a minimal fix, fix the name of the file to be read.
In the future we might want to reorganize this test script (1) to use
'test_cmp' instead of 'test's and command substitutions to catch
failing commands and to provide helpful error messages, and (2) to
specify what the expected result actually _is_ instead of what it
isn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test 'checkout with autocrlf=input' in 't0020-crlf.sh', one of
the 'has_cr' checks looks at the non-existing file 'two' instead of
'dir/two'. The test still succeeds, without actually checking what it
was supposed to, because this check is expected to fail anyway.
As a minimal fix, fix the name of the file to be checked.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test '--dry-run with conflicts fixed from a merge' in
't7501-commit.sh', added in 8dc874b2ee (wt-status.c: set commitable
bit if there is a meaningful merge., 2016-02-15), runs the following
unnecessary and downright bogus command substitution:
! $(git merge --no-commit commit-1) &&
I.e. after 'git merge ...' is executed and expectedly fails, the test
attempts to execute its output:
Merging:
80f2ea2 commit 2
virtual commit-1
found 1 common ancestor:
e60d113 Initial commit
Auto-merging test-file
CONFLICT (content): Merge conflict in test-file
Automatic merge failed; fix conflicts and then commit the result.
as a command, which most likely fails, because there is no such
command as "Merging:". Then '!' negates the failed exit status, the
test continues, and eventually succeeds.
Remove this command substitution and use 'test_must_fail' to ensure
that 'git merge' fails.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test-tool programs include "test-tool.h" as their first
include, which breaks our CodingGuideline of "the first
include must be git-compat-util.h or an equivalent".
Rather than change them all, let's instead make test-tool.h
one of those equivalents, just like we do for builtin.h
(which many of the actual git builtins include first).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is more idiomatic than 'test_cmp /dev/null
out', and its message on error is perhaps a bit more to the point.
This patch was basically created by running:
sed -i -e 's%test_cmp /dev/null%test_must_be_empty%' t[0-9]*.sh
with the exception of the change in 'should not fail in an empty repo'
in 't7401-submodule-summary.sh', where it was 'test_cmp output
/dev/null'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is preferable to 'test ! -s', because it
gives a helpful error message if the given file is unexpectedly no
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was created by:
sed -i -e 's/test ! -s/test_must_be_empty/' t[0-9]*.sh
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/checkout-default-remote:
t2024: mark test using "checkout -p" with PERL prerequisite
|
|
The sideband code learned to optionally paint selected keywords at
the beginning of incoming lines on the receiving end.
* hn/highlight-sideband-keywords:
sideband: do not read beyond the end of input
sideband: highlight keywords in remote sideband output
|
|
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
|
|
A few preliminary minor clean-ups in the area around submodules.
* sb/submodule-cleanup:
builtin/submodule--helper: remove stray new line
t7410: update to new style
|
|
"git rebase -i", when a 'merge <branch>' insn in its todo list
fails, segfaulted, which has been (minimally) corrected.
* pw/rebase-i-merge-segv-fix:
rebase -i: fix SIGSEGV when 'merge <branch>' fails
t3430: add conflicting commit
|
|
When "git rebase -i" is told to squash two or more commits into
one, it labeled the log message for each commit with its number.
It correctly called the first one "1st commit", but the next one
was "commit #1", which was off-by-one. This has been corrected.
* pw/rebase-i-squash-number-fix:
rebase -i: fix numbering in squash message
|
|
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
|
|
Test updates.
* ab/submodule-relative-url-tests:
submodule: add more exhaustive up-path testing
|
|
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
|
|
A test prerequisite defined by various test scripts with slightly
different semantics has been consolidated into a single copy and
made into a lazily defined one.
* wc/make-funnynames-shared-lazy-prereq:
t: factor out FUNNYNAMES as shared lazy prereq
|
|
Test fix.
* js/chain-lint-attrfix:
chainlint: fix for core.autocrlf=true
|
|
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
|
|
Improve built-in facility to catch broken &&-chain in the tests.
* es/chain-lint-more:
chainlint: add test of pathological case which triggered false positive
chainlint: recognize multi-line quoted strings more robustly
chainlint: let here-doc and multi-line string commence on same line
chainlint: recognize multi-line $(...) when command cuddled with "$("
chainlint: match 'quoted' here-doc tags
chainlint: match arbitrary here-docs tags rather than hard-coded names
|
|
Test fix.
* sg/t5310-empty-input-fix:
t5310-pack-bitmaps: fix bogus 'pack-objects to file can use bitmap' test
|
|
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
|
|
Test and doc clean-ups.
* ab/fetch-tags-noclobber:
pull doc: fix a long-standing grammar error
fetch tests: correct a comment "remove it" -> "remove them"
push tests: assert re-pushing annotated tags
push tests: add more testing for forced tag pushing
push tests: fix logic error in "push" test assertion
push tests: remove redundant 'git push' invocation
fetch tests: change "Tag" test tag to "testTag"
|
|
Test update.
* jt/commit-graph-per-object-store:
t5318: avoid unnecessary command substitutions
|
|
Test fix.
* ds/commit-graph-fsck:
t5318: use 'test_cmp_bin' to compare commit-graph files
|
|
Test fix.
* jt/fetch-negotiator-skipping:
t5552: suppress upload-pack trace output
|
|
Test fixes.
* en/t7406-fixes:
t7406: avoid using test_must_fail for commands other than git
t7406: prefer test_* helper functions to test -[feds]
t7406: avoid having git commands upstream of a pipe
t7406: simplify by using diff --name-only instead of diff --raw
t7406: fix call that was failing for the wrong reason
|
Jeff King
Jann Horn
Junio C Hamano
SZEDER Gábor