| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With v1.5.3.2~14 (apply --index-info: fall back to current index for
mode changes, 2007-09-17), git apply learned to stop worrying
about the lack of diff index line when a file already present in the
current index had no content change.
But it still worries too much: for rename patches, it is checking
that both the old and new filename are present in the current
index. This makes no sense, since a file rename generally
involves creating a file there was none before.
So just check the old filename.
Noticed while trying to use “git rebase” with diff.renames = copies.
[jn: add tests]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most tests in t4150 begin by navigating to a sane state and
applying some patch:
git checkout first &&
git am patch1
If a previous test left behind unmerged files or a .git/rebase-apply
directory, they are untouched and the test fails, causing later tests
to fail, too. This is not a problem in practice because none of the
tests leave a mess behind.
But as a futureproofing measure, it is still best to avoid the problem
and clean up at the start of each test. In particular, this
simplifies the process of adding new tests that are known to fail.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Place setup commands in test_expect_success blocks. This makes the
rare event of the setup commands breaking on some platform easier to
diagnose, and more importantly, it visually distinguishes where
each test begins and ends.
Instead of running test -z against the result of "git diff" command
substitution, use "git diff --exit-code", to improve output when
running with the "-v" option.
Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons.
Remove whitespace after the > and < redirection operators for
consistency with other tests.
The order of arguments to test_cmp is "test_cmp expected actual".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two tests weren't about how "git reflog show <branch>" exits when
there is no reflog, but were about "checkout" and "branch" create or not
create reflog when creating a new <branch>. Update the tests to check
what we are interested in, using "git rev-parse --verify".
Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from
nearby, to avoid exposing this particular implementation detail
unnecessarily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
See e2007832552ccea9befed9003580c494f09e666e
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two lines use the negation '!' operator to negate the result of a
simple command. Since these commands do not contain any pipes or other
complexities, the test_must_fail function can be used and is preferred
since it will additionally detect termination due to a signal.
This was noticed because the second use of '!' does not include a space
between the '!' and the opening parens. Ksh interprets this as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t/README: clarify test_must_fail description
Check size of path buffer before writing into it
Conflicts:
t/README
|
|
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/add-n-ignore-missing:
git add: Add the "--ignore-missing" option for the dry run
|
|
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
|
|
* wp/merge-tree-fix:
merge-tree: fix where two branches share no changes
add basic tests for merge-tree
|
|
* js/merge-rr-fix:
MERGE_RR is in .git, not .git/rr-cache
|
|
* jn/tests:
t3000 (ls-files -o): modernize style
|
|
* jn/grep-open:
grep -O: Do not pass color sequences as filenames to pager
|
|
* jc/rebase-i-commit-msg-fix:
rebase-i: do not get fooled by a log message ending with backslash
rebase-i: style fix
|
|
* ab/submodule-add-f:
git submodule: add submodules with git add -f <path>
|
|
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
0af0ac7 (Move MERGE_RR from .git/rr-cache/ into .git/) moved the
location of MERGE_RR but I found a few references to the old
location.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
15b4f7a (merge-tree: use ll_merge() not xdl_merge(), 2010-01-16)
introduced a regression to merge-tree to cause it to segfault when merging
files which existed in one branch, but not in the other or in the
merge-base. This was caused by referencing entry->path at a time when
entry was known to be possibly-NULL.
To correct the problem, we save the path of the entry we came in with,
as the path should be the same among all the stages no matter which
sides are involved in the merge.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge-tree had no test cases, so here we add some very basic tests for
it, including some known-breakages.
[jc: with obvious/trivial fixups]
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/read-tree-cache-tree-fix:
Fix "read-tree -m A B" priming the cache-tree
|
|
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: Spelling fix in protocol-capabilities.txt
checkout: accord documentation to what git does
t0005: work around strange $? in ksh when program terminated by a signal
|
|
This script is part of the second batch of tests, from the same day
the test infrastructure was added to git. Update it to use a more
modern style in the spirit of v1.6.4-rc0~45^2~2 (2009-05-22).
In particular:
- Put setup code inside test assertions, to avoid unexpected
breakages and avoid stray output without -v (as t/README
recommends); and
- Put the test title on the same line as the "test_expect_success",
and end the line with a single-quote to begin the body of the test
which is one multi-line string.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ksh93 is known to report $? of programs that terminated by a signal as
256 + signal number instead of 128 + signal number like other POSIX
compliant shells (ksh's behavior is still POSIX compliant in this regard).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ko/master: (2325 commits)
Git 1.7.2-rc2
backmerge a few more fixes to 1.7.1.X series
fix git branch -m in presence of cross devices
t/t0006: specify timezone as EST5 not EST to comply with POSIX
add missing && to submodule-merge testcase
t/README: document more test helpers
test-date: fix sscanf type conversion
xdiff: optimise for no whitespace difference when ignoring whitespace.
gitweb: Move evaluate_gitweb_config out of run_request
parse_date: fix signedness in timezone calculation
t0006: test timezone parsing
rerere.txt: Document forget subcommand
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
...
Conflicts:
builtin-read-tree.c
|
|
Change tests to skip with skip_all=* + test_done instead of using say
+ test_done.
This is a follow-up to "tests: Skip tests in a way that makes sense
under TAP" (fadb5156e4). I missed these cases when prepearing that
patch, hopefully this is all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 456156d a shortcut to priming the index tree reference was
introduced, but the justification for it was completely bogus.
"read-tree -m A B" is to take the index (and the working tree)
that is largely based on (but does not have to match exactly) A
and update it to B, while carrying the local change that does
not overlap the difference between A and B, so there is no reason
to expect that the resulting index should match the tree B.
Noticed and test provided by Heiko Voigt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When test #2 fails, the cwd is project/, causing all the
remaining tests in the same script to get confused and fail.
So in the spirit of v1.7.1.1~53^2~10 (t5550-http-fetch: Use subshell
for repository operations, 2010-04-17), use a subshell for svn
working copy operations. This way, the cwd will reliably return
to the top of the trash directory and later tests can still be run
when a command has failed.
Reported-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
@ is SVN's identifier for PEG revisions. But SVN's treatment of PEG
identifiers in copy target URLs changed in r954995/r952973, i.e. between
1.6.11 and 1.6.12. They get eaten now (which is considered the right
way).
Therefore, avoid the @ in the tests with funky branch names.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
With a .gitconfig like this:
[color]
ui = auto
[color "grep"]
filename = magenta
if stdout is a terminal, the grep machinery will output the color
sequence \e[36m before each filename in its output.
In the case of "git grep -O foo", output is argv for the pager.
Disable color when calling the grep machinery in this case.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/tap:
t/README: document more test helpers
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
t/t9700/test.pl: don't access private object members, use public access methods
t9700: Use Test::More->builder, not $Test::Builder::Test
tests: Say "pass" rather than "ok" on empty lines for TAP
tests: Skip tests in a way that makes sense under TAP
test-lib: output a newline before "ok" under a TAP harness
test-lib: Make the test_external_* functions TAP-aware
test-lib: Adjust output to be valid TAP format
|
|
* maint:
backmerge a few more fixes to 1.7.1.X series
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
fix git branch -m in presence of cross devices
Conflicts:
RelNotes
builtin/rev-parse.c
|
|
* maint-1.6.4:
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
|
|
The ?: operator has a lower priority than |, so the implicit associativity
made the 6th argument of parse_options be PARSE_OPT_KEEP_DASHDASH if
keep_dashdash was true discarding PARSE_OPT_STOP_AT_NON_OPTION and
PARSE_OPT_SHELL_EVAL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/receive-pack-aliased-update-fix:
check_aliased_update: strcpy() instead of strcat() to copy
receive-pack: detect aliased updates which can occur with symrefs
receive-pack: switch global variable 'commands' to a parameter
Conflicts:
t/t5516-fetch-push.sh
|
|
POSIX requires that both the timezone "standard" and "offset" be specified
in the TZ environment variable. This causes a problem on IRIX which does
not understand the timezone 'EST'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
add missing && to submodule-merge testcase
test-date: fix sscanf type conversion
|
|
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no documentation in t/README for test_must_fail,
test_might_fail, test_cmp, or test_when_finished.
Reported-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When no timezone is specified, we deduce the offset by
subtracting the result of mktime from our calculated
timestamp.
However, our timestamp is stored as an unsigned integer,
meaning we perform the subtraction as unsigned. For a
negative offset, this means we wrap to a very high number,
and our numeric timezone is in the millions of hours. You
can see this bug by doing:
$ TZ=EST \
GIT_AUTHOR_DATE='2010-06-01 10:00' \
git commit -a -m foo
$ git cat-file -p HEAD | grep author
author Jeff King <peff@peff.net> 1275404416 +119304128
Instead, we should perform this subtraction as a time_t, the
same type that mktime returns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t0006: test timezone parsing
rerere.txt: Document forget subcommand
Documentation/git-gc.txt: add reference to githooks
|
|
Previously, test-date simply ignored the parsed timezone and
told show_date() to use UTC. Instead, let's print out what
we actually parsed.
While we're at it, let's make it easy for tests to work in a specific
timezone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Nieder
Brandon Casey
Jens Lehmann
Thomas Rast
Jay Soffian
Will Palmer
Michael J Gruber
Johannes Sixt
Ævar Arnfjörð Bjarmason
Nazri Ramliy
Uwe Kleine-König
Heiko Voigt
Jeff King