| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This script uses the following idiom to start each test in a known
good state:
test_expect_success 'some commands use a pager' '
rm -f paginated.out || cleanup_fail &&
test_terminal git log &&
test -e paginated.out
'
where "cleanup_fail" is a function that prints an error message and
errors out.
That is bogus on three levels:
- Cleanup commands like "rm -f" and "test_unconfig" are designed not
to fail, so this logic would never trip.
- If they were to malfunction anyway, it is not useful to set apart
cleanup commands as a special kind of failure with a special error
message. Whichever command fails, the next step is to investigate
which command that was, for example by running tests with
"prove -e 'sh -x'", and fix it.
- Relying on left-associativity of mixed &&/|| lists makes the code
somewhat cryptic.
The fix is simple: drop the "|| cleanup_fail" in each test and the
definition of the "cleanup_fail" function so no new callers can arise.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this patch, any commands that are not builtin would
not respect pager.* config. For example:
git config pager.stash false
git stash list
would still use a pager. With this patch, pager.stash now
has an effect. If it is not specified, we will still fall
back to pager.log when we invoke "log" from "stash list".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have always set a global "spawned_pager" variable when we
start the pager. This lets us make the auto-color decision
later in the program as as "we are outputting to a terminal,
or to a pager which can handle colors".
Commit 6e9af86 added support for the GIT_PAGER_IN_USE
environment variable. An external program calling git (e.g.,
git-svn) could set this variable to indicate that it had
already started the pager, and that the decision about
auto-coloring should take that into account.
However, 6e9af86 failed to do the reverse, which is to tell
external programs when git itself has started the pager.
Thus a git command implemented as an external script that
has the pager turned on (e.g., "git -p stash show") would
not realize it was going to a pager, and would suppress
colors.
This patch remedies that; we always set GIT_PAGER_IN_USE
when we start the pager, and the value is respected by both
this program and any spawned children.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, this is just making the test script a little
shorter and easier to read. However, there are several
places where we didn't take proper precautions against
polluting downstream tests with our config; this fixes them,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a few common tasks when working with configuration
variables in tests; this patch aims to make them a little
easier to write and less error-prone.
When setting a variable, you should typically make sure to
clean it up after the test is finished, so as not to pollute
other tests. Like:
test_when_finished 'git config --unset foo.bar' &&
git config foo.bar baz
This patch lets you just write:
test_config foo.bar baz
When clearing a variable that does not exist, git-config
will report a specific non-zero error code. Meaning that
tests which call "git config --unset" often either rely on
the prior tests having actually set it, or must use
test_might_fail. With this patch, the previous:
test_might_fail git config --unset foo.bar
becomes:
test_unconfig foo.bar
Not only is this easier to type, but it is more robust; it
will correctly detect errors from git-config besides "key
was not set".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests break &&-chaining to deal with broken "unset"
implementations. Instead, they should just use sane_unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/tag-list-multiple-patterns:
tag: accept multiple patterns for --list
|
|
* jl/submodule-update-quiet:
submodule: update and add must honor --quiet flag
|
|
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
|
|
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
|
|
* jk/fast-export-quote-path:
fast-export: quote paths in output
|
|
* jc/maint-reset-unmerged-path:
reset [<commit>] paths...: do not mishandle unmerged paths
|
|
* jc/submodule-sync-no-auto-vivify:
submodule add: always initialize .git/config entry
submodule sync: do not auto-vivify uninteresting submodule
|
|
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
|
|
* aw/rebase-i-p:
rebase -i -p: include non-first-parent commits in todo list
|
|
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
|
|
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/maint-fetch-recursive-fix:
fetch: Also fetch submodules in subdirectories in on-demand mode
|
|
* jc/maint-1.7.3-checkout-describe:
checkout -b <name>: correctly detect existing branch
|
|
One of the tests in t7400 fails if the trash directory has a
symlink anywhere in its path. E.g.:
$ mkdir /tmp/git-test
$ mkdir /tmp/git-test/real
$ ln -s real /tmp/git-test/link
$ ./t7400-submodule-basic --root=/tmp/git-test/real
...
# passed all 44 test(s)
$ ./t7400-submodule-basic --root=/tmp/git-test/link
...
not ok - 41 use superproject as upstream when path is relative and no url is set there
The failing test does:
git submodule add ../repo relative &&
...
git submodule sync relative &&
test "$(git config submodule.relative.url)" = "$submodurl/repo"
where $submodurl comes from the $TRASH_DIRECTORY the user
gave us. However, git will resolve symlinks when converting
the relative path into an absolute one, leading them to be
textually different (even though they point to the same
directory).
Fix this by asking pwd to canonicalize the name of the trash
directory for us.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the --quiet flag "git submodule update" and "git submodule add"
didn't behave as the documentation stated. They printed progress output
from the clone, even though they should only print error messages.
Fix that by passing the -q flag to git clone in module_clone() when the
GIT_QUIET variable is set. Two tests in t7400 have been modified to test
that behavior.
Reported-by: Daniel Holtmann-Rice <flyingtabmow@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On modern multi-core processors "make test" is often run in multiple jobs.
If one of them fails the test run does stop, but the concurrently running
tests finish their run. It is rather easy to find out which test failed by
doing a "ls -d t/trash*". But that only works when you don't use the "-i"
option to "make test" because you want to get an overview of all failing
tests. In that case all thrash directories are deleted end and the
information which tests failed is lost.
If one or more tests failed, print a list of them before the test summary:
failed test(s): t1000 t6500
fixed 0
success 7638
failed 3
broken 49
total 7723
This makes it possible to just run the test suite with -i and collect all
failed test scripts at the end for further examination.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expected to fail at this commit, fixed by subsequent commit.
Additional tests of adhoc or uncategorised nature should be added to this
file.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because "diff --cached HEAD" showed an incorrect blob object name on the
LHS of the diff, we ended up updating the index entry with bogus value,
not what we read from the tree.
Noticed by John Nowak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. This can cause a problem
if the command requires reading from stdin or if it changes its behavior
based on whether stdin is a tty or not (e.g. git shortlog). Demonstrate
this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://bogomips.org/git-svn:
git-svn: Correctly handle root commits in mergeinfo ranges
git-svn: Disambiguate rev-list arguments to improve error message
git-svn: Demonstrate a bug with root commits in mergeinfo ranges
|
|
* maint-1.7.5:
test: skip clean-up when running under --immediate mode
"branch -d" can remove more than one branches
|
|
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
|
|
If the bottom of a mergeinfo range is a commit that maps to a git root
commit, then it doesn't have a parent. In such a case, use git commit
range "$top_commit" rather than "$bottom_commit^..$top_commit".
[ew: line-wrap at 80 columns]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
If a svn:mergeinfo range starts at a commit that was converted as a
git root commit (e.g., r1 or a branch that was created out of thin
air), then there is an error when git-svn tries to run
git rev-list "$bottom_commit^..$top_commit"
because $bottom_commit (the git commit corresponding to r1) has no
parent.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Earlier 33f072f (submodule sync: Update "submodule.<name>.url" for empty
directories, 2010-10-08) attempted to fix a bug where "git submodule sync"
command does not update the URL if the current superproject does not have
a checkout of the submodule.
However, it did so by unconditionally registering submodule.$name.url to
every submodule in the project, even the ones that the user has never
showed interest in at all by running 'git submodule init' command. This
caused subsequent 'git submodule update' to start cloning/updating submodules
that are not interesting to the user at all.
Update the code so that the URL is updated from the .gitmodules file only
for submodules that already have submodule.$name.url entries, i.e. the
ones the user has showed interested in having a checkout.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mk/grep-pcre:
t7810: avoid unportable use of "echo"
|
|
Michael J Gruber noticed that under /bin/dash this test failed
(as is expected -- \n in the string can be interpreted by the
command), while it passed with bash. We probably could work it
around by using backquote in front of it, but it is safer and
more readable to avoid "echo" altogether in a case like this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When on-demand mode was active examining the new commits just fetched in
the superproject (to check if they record commits for submodules which are
not downloaded yet) wasn't done recursively. Because of that fetch did not
recursively fetch submodules living in subdirectories even when it should
have.
Fix that by adding the RECURSIVE flag to the diff_options used to check
the new commits and avoid future regressions in this area by moving a
submodule in t5526 into a subdirectory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until now, "git tag -l foo* bar*" would silently ignore the
second argument, showing only refs starting with "foo". It's
not just unfriendly not to take a second pattern; we
actually generated subtly wrong results (from the user's
perspective) because some of the requested tags were
omitted.
This patch allows an arbitrary number of patterns on the
command line; if any of them matches, the ref is shown.
While we're tweaking the documentation, let's also make it
clear that the pattern is fnmatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* di/no-no-existant:
Fix typo: existant->existent
|
|
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146232d81f1bb4bc58e5d89263fd228d4
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we run tests under valgrind, we symlink anything
executable that starts with git-* or test-* into a special
valgrind bin directory, and then make that our
GIT_EXEC_PATH.
However, shell libraries like git-sh-setup do not have the
executable bit marked, and did not get symlinked. This
means that any test looking for shell libraries in our
exec-path would fail to find them, even though that is a
fine thing to do when testing against a regular git build
(or in a git install, for that matter).
t2300 demonstrated this problem. The fix is to symlink these
shell libraries directly into the valgrind directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The valgrind target just reinvokes make with GIT_TEST_OPTS
set to "--valgrind". However, it does this using an
environment variable, which means GIT_TEST_OPTS in your
config.mak would override it, and "make valgrind" would
simply run the test suite without valgrind on.
Instead, we should pass GIT_TEST_OPTS on the command-line,
overriding what's in config.mak, and take care to append to
whatever the user has there already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/magic-pathspec:
t3703: skip more tests using colons in file names on Windows
|
|
Use the same test and prerequisite as introduced in similar
fix in 650af7ae8bdf92bd92df2.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adding a submodule with a relative repository path did only succeed when
the superproject's default remote was set. But when that is unset, the
superproject is its own authoritative upstream, so lets use its working
directory as upstream instead.
This allows users to set up a new superpoject where the submodules urls
are configured relative to the superproject's upstream while its default
remote can be configured later.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This documents the current behavior (submodule add with the url set in the
superproject is already tested in t7403, t7406, t7407 and t7506).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/diff-not-so-quick:
diff: futureproof "stop feeding the backend early" logic
diff_tree: disable QUICK optimization with diff filter
Conflicts:
diff.c
|
|
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
|
Jonathan Nieder
Jeff King
Junio C Hamano
Jens Lehmann
Jon Seymour
Brandon Casey
Michael Haggerty
Andrew Wong
Dmitry Ivankov
Alex Riesen