| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.
* en/rebase-consistency:
git-rebase: make --allow-empty-message the default
t3401: add directory rename testcases for rebase and am
git-rebase.txt: document behavioral differences between modes
directory-rename-detection.txt: technical docs on abilities and limitations
git-rebase.txt: address confusion between --no-ff vs --force-rebase
git-rebase: error out when incompatible options passed
t3422: new testcases for checking when incompatible options passed
git-rebase.sh: update help messages a bit
git-rebase.txt: document incompatible options
|
|
"git checkout --recurse-submodules another-branch" did not report
in which submodule it failed to update the working tree, which
resulted in an unhelpful error message.
* sb/submodule-move-head-error-msg:
submodule.c: report the submodule that an error occurs in
|
|
* en/rebase-i-microfixes:
git-rebase--merge: modernize "git-$cmd" to "git $cmd"
Fix use of strategy options with interactive rebases
t3418: add testcase showing problems with rebase -i and strategy options
|
|
"git filter-branch" when used with the "--state-branch" option
still attempted to rewrite the commits whose filtered result is
known from the previous attempt (which is recorded on the state
branch); the command has been corrected not to waste cycles doing
so.
* mb/filter-branch-optim:
filter-branch: skip commits present on --state-branch
|
|
The "-l" option in "git branch -l" is an unfortunate short-hand for
"--create-reflog", but many users, both old and new, somehow expect
it to be something else, perhaps "--list". This step warns when "-l"
is used as a short-hand for "--create-reflog" and warns about the
future repurposing of the it when it is used.
* jk/branch-l-0-deprecation:
branch: deprecate "-l" option
t: switch "branch -l" to "branch --create-reflog"
t3200: unset core.logallrefupdates when testing reflog creation
|
|
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
|
|
Recently added "--base" option to "git format-patch" command did
not correctly generate prereq patch ids.
* xy/format-patch-prereq-patch-id-fix:
format-patch: clear UNINTERESTING flag before prepare_bases
|
|
Bugfix for "rebase -i" corner case regression.
* pw/rebase-i-keep-reword-after-conflict:
sequencer: do not squash 'reword' commits when we hit conflicts
|
|
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
|
|
The code to try seeing if a fetch is necessary in a submodule
during a fetch with --recurse-submodules got confused when the path
to the submodule was changed in the range of commits in the
superproject, sometimes showing "(null)". This has been corrected.
* sb/fix-fetching-moved-submodules:
t5526: test recursive submodules when fetching moved submodules
submodule: fix NULL correctness in renamed broken submodules
|
|
test cleanup.
* jc/clean-after-sanity-tests:
tests: clean after SANITY tests
|
|
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
|
|
When user edits the patch in "git add -p" and the user's editor is
set to strip trailing whitespaces indiscriminately, an empty line
that is unchanged in the patch would become completely empty
(instead of a line with a sole SP on it). The code introduced in
Git 2.17 timeframe failed to parse such a patch, but now it learned
to notice the situation and cope with it.
* pw/add-p-recount:
add -p: fix counting empty context lines in edited patches
|
|
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
|
|
The recent addition of "partial clone" experimental feature kicked
in when it shouldn't, namely, when there is no partial-clone filter
defined even if extensions.partialclone is set.
* jh/partial-clone:
list-objects: check if filter is NULL before using
|
|
Some flaky tests have been fixed.
* sg/gpg-tests-fix:
tests: make forging GPG signed commits and tags more robust
t7510-signed-commit: use 'test_must_fail'
|
|
Fix for 2.17-era regression around `core.safecrlf`.
* as/safecrlf-quiet-fix:
config.c: fix regression for core.safecrlf false
|
|
git-rebase.sh wrote strategy options to .git/rebase/merge/strategy_opts
in the following format:
'--ours' '--renormalize'
Note the double spaces.
git-rebase--interactive uses sequencer.c to parse that file, and
sequencer.c used split_cmdline() to get the individual strategy options.
After splitting, sequencer.c prefixed each "option" with a double dash,
so, concatenating all its options would result in:
-- --ours -- --renormalize
So, when it ended up calling try_merge_strategy(), that in turn would run
git merge-$strategy -- --ours -- --renormalize $merge_base -- $head $remote
instead of the expected/desired
git merge-$strategy --ours --renormalize $merge_base -- $head $remote
Remove the extra spaces so that when it goes through split_cmdline() we end
up with the desired command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are not passing the same args to merge strategies when we are doing an
--interactive rebase as we do with a --merge rebase. The merge strategy
should not need to be aware of which type of rebase is in effect. Add a
testcase which checks for the appropriate args.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase backends currently behave differently with empty commit messages,
largely as a side-effect of the different underlying commands on which
they are based. am-based rebases apply commits with an empty commit
message without stopping or requiring the user to specify an extra flag.
(It is interesting to note that am-based rebases are the default rebase
type, and no one has ever requested a --no-allow-empty-message flag to
change this behavior.) merge-based and interactive-based rebases (which
are ultimately based on git-commit), will currently halt on any such
commits and require the user to manually specify what to do with the
commit and continue.
One possible rationale for the difference in behavior is that the purpose
of an "am" based rebase is solely to transplant an existing history, while
an "interactive" rebase is one whose purpose is to polish a series before
making it publishable. Thus, stopping and asking for confirmation for a
possible problem is more appropriate in the latter case. However, there
are two problems with this rationale:
1) merge-based rebases are also non-interactive and there are multiple
types of rebases that use the interactive machinery but are not
explicitly interactive (e.g. when either --rebase-merges or
--keep-empty are specified without --interactive). These rebases are
also used solely to transplant an existing history, and thus also
should default to --allow-empty-message.
2) this rationale only says that the user is more accepting of stopping
in the case of an explicitly interactive rebase, not that stopping
for this particular reason actually makes sense. Exploring whether
it makes sense, requires backing up and analyzing the underlying
commands...
If git-commit did not error out on empty commits by default, accidental
creation of commits with empty messages would be a very common occurrence
(this check has caught me many times). Further, nearly all such empty
commit messages would be considered an accidental error (as evidenced by a
huge amount of documentation across version control systems and in various
blog posts explaining how important commit messages are). A simple check
for what would otherwise be a common error thus made a lot of sense, and
git-commit gained an --allow-empty-message flag for special case
overrides. This has made commits with empty messages very rare.
There are two sources for commits with empty messages for rebase (and
cherry-pick): (a) commits created in git where the user previously
specified --allow-empty-message to git-commit, and (b) commits imported
into git from other version control systems. In case (a), the user has
already explicitly specified that there is something special about this
commit that makes them not want to specify a commit message; forcing them
to re-specify with every cherry-pick or rebase seems more likely to be
infuriating than helpful. In case (b), the commit is highly unlikely to
have been authored by the person who has imported the history and is doing
the rebase or cherry-pick, and thus the user is unlikely to be the
appropriate person to write a commit message for it. Stopping and
expecting the user to modify the commit before proceeding thus seems
counter-productive.
Further, note that while empty commit messages was a common error case for
git-commit to deal with, it is a rare case for rebase (or cherry-pick).
The fact that it is rare raises the question of why it would be worth
checking and stopping on this particular condition and not others. For
example, why doesn't an interactive rebase automatically stop if the
commit message's first line is 2000 columns long, or is missing a blank
line after the first line, or has every line indented with five spaces, or
any number of other myriad problems?
Finally, note that if a user doing an interactive rebase does have the
necessary knowledge to add a message for any such commit and wants to do
so, it is rather simple for them to change the appropriate line from
'pick' to 'reword'. The fact that the subject is empty in the todo list
that the user edits should even serve as a way to notify them.
As far as I can tell, the fact that merge-based and interactive-based
rebases stop on commits with empty commit messages is solely a by-product
of having been based on git-commit. It went without notice for a long
time precisely because such cases are rare. The rareness of this
situation made it difficult to reason about, so when folks did eventually
notice this behavior, they assumed it was there for a good reason and just
added an --allow-empty-message flag. In my opinion, stopping on such
messages not desirable in any of these cases, even the (explicitly)
interactive case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a simple directory rename testcase, in conjunction with each of the
types of rebases:
git-rebase--interactive
git-rebase--am
git-rebase--merge
and also use the same testcase for
git am --3way
This demonstrates a difference in behavior between the different rebase
backends in regards to directory rename detection.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git rebase has three different types: am, merge, and interactive, all of
which are implemented in terms of separate scripts. am builds on git-am,
merge builds on git-merge-recursive, and interactive builds on
git-cherry-pick. We make use of features in those lower-level commands in
the different rebase types, but those features don't exist in all of the
lower level commands so we have a range of incompatibilities. Previously,
we just accepted nearly any argument and silently ignored whichever ones
weren't implemented for the type of rebase specified. Change this so the
incompatibilities are documented, included in the testsuite, and tested
for at runtime with an appropriate error message shown.
Some exceptions I left out:
* --merge and --interactive are technically incompatible since they are
supposed to run different underlying scripts, but with a few small
changes, --interactive can do everything that --merge can. In fact,
I'll shortly be sending another patch to remove git-rebase--merge and
reimplement it on top of git-rebase--interactive.
* One could argue that --interactive and --quiet are incompatible since
--interactive doesn't implement a --quiet mode (perhaps since
cherry-pick itself does not implement one). However, the interactive
mode is more quiet than the other modes in general with progress
messages, so one could argue that it's already quiet.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git rebase is split into three types: am, merge, and interactive. Various
options imply different types, and which mode we are using determine which
sub-script (git-rebase--$type) is executed to finish the work. Not all
options work with all types, so add tests for combinations where we expect
to receive an error rather than having options be silently ignored.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commits in state:filter.map have already been processed, so don't
filter them again. This makes incremental git filter-branch much faster.
Also add tests for --state-branch option.
Signed-off-by: Michael Barabanov <michael.barabanov@gmail.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of mucking with filesystem directly, use plumbing commands
update-ref etc. to manipulate the refs in the tests.
* cc/tests-without-assuming-ref-files-backend:
t9104: kosherly remove remote refs
|
|
"git fetch --shallow-since=<cutoff>" that specifies the cut-off
point that is newer than the existing history used to end up
grabbing the entire history. Such a request now errors out.
* nd/reject-empty-shallow-request:
upload-pack: reject shallow requests that would return nothing
|
|
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
|
|
Clean up tests in t6xxx series about 'merge' command.
* en/merge-recursive-tests:
t6036: prefer test_when_finished to manual cleanup in following test
t6036, t6042: prefer test_cmp to sequences of test
t6036, t6042: prefer test_path_is_file, test_path_is_missing
t6036, t6042: use test_line_count instead of wc -l
t6036, t6042: use test_create_repo to keep tests independent
|
|
"git diff" compares the index and the working tree. For paths
added with intent-to-add bit, the command shows the full contents
of them as added, but the paths themselves were not marked as new
files. They are now shown as new by default.
"git apply" learned the "--intent-to-add" option so that an
otherwise working-tree-only application of a patch will add new
paths to the index marked with the "intent-to-add" bit.
* nd/diff-apply-ita:
apply: add --intent-to-add
t2203: add a test about "diff HEAD" case
diff: turn --ita-invisible-in-index on by default
diff: ignore --ita-[in]visible-in-index when diffing worktree-to-tree
|
|
Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
|
|
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
|
|
When an error occurs in updating the working tree of a submodule in
submodule_move_head, tell the user which submodule the error occurred in.
The call to read-tree contains a super-prefix, such that the read-tree
will correctly report any path related issues, but some error messages
do not contain a path, for example:
~/gerrit$ git checkout --recurse-submodules origin/master
~/gerrit$ fatal: failed to unpack tree object 07672f31880ba80300b38492df9d0acfcd6ee00a
Give the hint which submodule has a problem.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for deprecating "-l", let's make sure we're
using the recommended option ourselves.
This patch just mechanically converts "branch -l" to "branch
--create-reflog". Note that with the exception of the
actual "--create-reflog" test, we could actually remove "-l"
entirely from most of these callers. That's because these
days core.logallrefupdates defaults to true in a non-bare
repository.
I've left them in place, though, since they serve to
document the expectation of the test, even if they are
technically noops.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test checks that the "-l" option creates a reflog. But
in fact we'd create one even without it, since the default
in a non-bare repository is to do so. Let's unset the config
so we can be sure our "-l" option is kicking in.
Note that we can't do this with test_config, since that
would leave the variable unset after our test finishes,
confusing downstream tests (the helper is not not smart
enough to restore the previous value, and just always runs
test_unconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach 'git-grep(1)' a new option, '--column', to show the column
number of the first match on a non-context line. This makes it possible
to teach 'contrib/git-jump/git-jump' how to seek to the first matching
position of a grep match in your editor, and allows similar additional
scripting capabilities.
For example:
$ git grep -n --column foo | head -n3
.clang-format:51:14:# myFunction(foo, bar, baz);
.clang-format:64:7:# int foo();
.clang-format:75:8:# void foo()
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When users specify the commit range with 'Z..C' pattern for format-patch, all
the parents of Z (including Z) would be marked as UNINTERESTING which would
prevent revision walk in prepare_bases from getting the prerequisite commits,
thus `git format-patch --base <base_commit_sha> Z..C` won't be able to generate
the list of prerequisite patch ids. Clear UNINTERESTING flag with
clear_object_flags solves this issue.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since commit 18633e1a22 ("rebase -i: use the rebase--helper builtin",
2017-02-09), when a commit marked as 'reword' in an interactive rebase
has conflicts and fails to apply, when the rebase is resumed that commit
will be squashed into its parent with its commit message taken.
The issue can be understood better by looking at commit 56dc3ab04b
("sequencer (rebase -i): implement the 'edit' command", 2017-01-02), which
introduced error_with_patch() for the edit command. For the edit command,
it needs to stop the rebase whether or not the patch applies cleanly. If
the patch does apply cleanly, then when it resumes it knows it needs to
amend all changes into the previous commit. If it does not apply cleanly,
then the changes should not be amended. Thus, it passes !res (success of
applying the 'edit' commit) to error_with_patch() for the to_amend flag.
The problematic line of code actually came from commit 04efc8b57c
("sequencer (rebase -i): implement the 'reword' command", 2017-01-02).
Note that to get to this point in the code:
* !!res (i.e. patch application failed)
* item->command < TODO_SQUASH
* item->command != TODO_EDIT
* !is_fixup(item->command) [i.e. not squash or fixup]
So that means this can only be a failed patch application that is either a
pick, revert, or reword. We only need to amend HEAD when rewording the
root commit or a commit that has been fast-forwarded, for any of the other
cases we want a new commit, so we should not set the to_amend flag.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Original-patch-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cf/submodule-progress-dissociate:
t7400: encapsulate setup code in test_expect_success
|
|
* js/rebase-i-root-fix:
t3404: check root commit in 'rebase -i --root reword root commit'
|
|
When running t7400 in a shell you observe more output than expected:
...
ok 8 - setup - hide init subdirectory
ok 9 - setup - repository to add submodules to
ok 10 - submodule add
[master (root-commit) d79ce16] one
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 one.t
ok 11 - redirected submodule add does not show progress
ok 12 - redirected submodule add --progress does show progress
ok 13 - submodule add to .gitignored path fails
...
Fix the output by encapsulating the setup code in test_expect_success
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When testing a reworded root commit, ensure that the squash-onto commit
which is created and amended is still the root commit.
Suggested-by: Phillip Wood <phillip.wood@talktalk.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* sg/t7406-chain-fix:
t7406-submodule-update: fix broken &&-chains
|
|
A test title has been reworded to clarify it.
* ks/branch-set-upstream:
t3200: clarify description of --set-upstream test
|
|
A regression to "rebase -i --root" introduced during this cycle has
been fixed.
* js/rebase-i-root-fix:
rebase --root: fix amending root commit messages
rebase --root: demonstrate a bug while amending root commit messages
|
|
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
|
|
"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
|
|
Three tests in 't7406-submodule-update' contain broken &&-chains, but
since they are all in subshells, chain-lint couldn't notice them.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Michael Barabanov
Stefan Beller
Jeff King
Taylor Blau
Xiaolong Ye
Phillip Wood
Todd Zullinger
SZEDER Gábor
Johannes Schindelin