Age | Commit message (Collapse) | Author | Files | Lines |
|
Commit 90cf590f5 (fsck: optionally show more helpful info
for broken links, 2016-07-17) added a remove_loose_object()
helper, but we already had a remove_object() helper that did
the same thing. Let's combine these into one.
The implementations had a few subtle differences, so I've
tried to take the best of both:
- the original used "sed", but the newer version avoids
spawning an extra process
- the original processed "$*", which was nonsense, as it
assumed only a single sha1. Use "$1" to make that more
clear.
- the newer version ran an extra rev-parse, but it was not
necessary; it's sole caller already converted the
argument into a raw sha1
- the original used "rm -f", whereas the new one uses
"rm". The latter is better because it may notice a bug
or other unexpected failure in the test. (The original
does check that the object exists before we remove it,
which is good, but that's a subset of the possible
unexpected conditions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git archive" and "git mailinfo" stopped reading from local
configuration file with a recent update.
* jc/setup-cleanup-fix:
archive: read local configuration
mailinfo: read local configuration
|
|
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
|
|
Using a %(HEAD) placeholder in "for-each-ref --format=" option
caused the command to segfault when on an unborn branch.
* jc/for-each-ref-head-segfault-fix:
for-each-ref: do not segv with %(HEAD) on an unborn branch
|
|
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git archive" however didn't do the
repository discovery and instead relied on the old behaviour.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables are honoured.
[jc: stole tests from peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git mailinfo" however didn't do the
repository discovery and instead relied on the old behaviour. This
was mostly OK because it was merely run as a helper program by other
porcelain scripts that first chdir's up to the root of the working
tree.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables like mailinfo.scissors are
honoured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "git stripspace" reads the configuration was not quite
kosher, in that the code forgot to probe for a possibly existing
repository (note: stripspace is designed to be usable outside the
repository as well). It read .git/config only when it was run from
the top-level of the working tree by accident. A recent change
b9605bc4f2 ("config: only read .git/config from configured repos",
2016-09-12) stopped reading the repository-local configuration file
".git/config" unless the repository discovery process is done, so
that .git/config is never read even when run from the top-level,
exposing the old bug more.
When rebasing interactively with a commentChar defined in the
current repository's config, the help text at the bottom of the edit
script potentially used an incorrect comment character. This was not
only funny-looking, but also resulted in tons of warnings like this
one:
Warning: the command isn't recognized in the following line
- #
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interactive rebase does not currently play well with
core.commentchar. Let's add some tests to highlight those problems
that will be fixed in the remainder of the series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to flip between "*" and " " prefixes depending on what
branch is checked out used in --format='%(HEAD)' did not consider
that HEAD may resolve to an unborn branch and dereferenced a NULL.
This will become a lot easier to trigger as the codepath will be
used to reimplement "git branch [--list]" in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Last minute fixes to two fixups merged to 'master' recently.
* js/pwd-var-vs-pwd-cmd-fix:
t0021, t5615: use $PWD instead of $(pwd) in PATH-like shell variables
|
|
Test portability improvements and optimization for an
already-graduated topic.
* ls/filter-process:
t0021: remove debugging cruft
|
|
Fix for a racy false-positive test failure.
* as/merge-attr-sleep:
t6026: clarify the point of "kill $(cat sleep.pid)"
t6026: ensure that long-running script really is
Revert "t6026-merge-attr: don't fail if sleep exits early"
Revert "t6026-merge-attr: ensure that the merge driver was called"
t6026-merge-attr: ensure that the merge driver was called
t6026-merge-attr: don't fail if sleep exits early
|
|
The redirection of the standard error stream to a temporary file is
a leftover cruft during debugging. Remove it.
Besides, it is reported by folks on the Windows that the test is
flaky with this redirection; somebody gets confused and this
merely-redirected-to file gets marked as delete-pending by git.exe
and makes it finish with a non-zero exit status when "git checkout"
finishes. Windows folks may want to figure that one out, but for
the purpose of this test, it shouldn't become a show-stopper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We lengthened the time the leftover process sleeps in the previous
commit to make sure it will be there while 'git merge' runs and
finishes. It therefore needs to be killed before leaving the test.
And it needs to be killed even when 'git merge' fails, so it has to
be triggered via test_when_finished mechanism.
Explain all that in a large comment, and move the use site of
test_when_finished to immediately before 'git merge' invocation,
where the process is spawned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have to use $PWD instead of $(pwd) because on Windows the latter
would add a C: style path to bash's Unix-style $PATH variable, which
becomes confused by the colon after the drive letter. ($PWD is a
Unix-style path.)
In the case of GIT_ALTERNATE_OBJECT_DIRECTORIES, bash on Windows
assembles a Unix-style path list with the colon as separators. It
converts the value to a Windows-style path list with the semicolon as
path separator when it forwards the variable to git.exe. The same
confusion happens when bash's original value is contaminated with
Windows style paths.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When making sure that background tasks are cleaned up in 5babb5b
(t6026-merge-attr: clean up background process at end of test case,
2016-09-07), we considered to let the background task sleep longer, just
to be certain that it will still be running when we want to kill it
after the test.
Sadly, the assumption appears not to hold true that the test case passes
quickly enough to kill the background task within a second.
Simply increase it to an hour. No system can be possibly slow enough to
make above-mentioned assumption incorrect.
Reported by Andreas Schwab.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 734fde2d7167e4b20d2ff6062ade3846949b0741.
The point of the test is that the stray process was still running
when 'git merge' did its thing through its completion, so a failure
to "kill" it means we didn't give a condition to the test to trigger
a possible future breakage. Appending "|| :" to the "kill" is
sweeping a test-bug under the rug.
|
|
This reverts commit c1e0dc59bddce765761a6f863c66ee0cd4b2ca09.
We are not interested in the stray process in the merge driver
started; we want it to be still around.
|
|
Fix a corner-case regression in a topic that graduated during the
v2.11 cycle.
* jk/alt-odb-cleanup:
alternates: re-allow relative paths from environment
|
|
Test portability improvements and cleanups for t0021.
* jk/filter-process-fix:
t0021: fix filehandle usage on older perl
t0021: use $PERL_PATH for rot13-filter.pl
t0021: put $TEST_ROOT in $PATH
t0021: use write_script to create rot13 shell script
|
|
Test portability improvements and optimization for an
already-graduated topic.
* ls/filter-process:
t0021: compute file size with a single process instead of a pipeline
t0021: expect more variations in the output of uniq -c
|
|
Explicitly check for the existence of the pid file to test that the
merge driver was actually called.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 5babb5bdb3 ("t6026-merge-attr: clean up background process at end
of test case") added a kill command to clean up after the test, but this
can fail if the sleep command exits before the cleanup is executed.
Ignore the error from the kill command.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Commit 670c359da (link_alt_odb_entry: handle normalize_path
errors, 2016-10-03) regressed the handling of relative paths
in the GIT_ALTERNATE_OBJECT_DIRECTORIES variable. It's not
entirely clear this was ever meant to work, but it _has_
worked for several years, so this commit restores the
original behavior.
When we get a path in GIT_ALTERNATE_OBJECT_DIRECTORIES, we
add it the path to the list of alternate object directories
as if it were found in objects/info/alternates, but with one
difference: we do not provide the link_alt_odb_entry()
function with a base for relative paths. That function
doesn't turn it into an absolute path, and we end up feeding
the relative path to the strbuf_normalize_path() function.
Most relative paths break out of the top-level directory
(e.g., "../foo.git/objects"), and thus normalizing fails.
Prior to 670c359da, we simply ignored the error, and due to
the way normalize_path_copy() was implemented it happened to
return the original path in this case. We then accessed the
alternate objects using this relative path.
By storing the relative path in the alt_odb list, the path
is relative to wherever we happen to be at the time we do an
object lookup. That means we look from $GIT_DIR in a bare
repository, and from the top of the worktree in a non-bare
repository.
If this were being designed from scratch, it would make
sense to pick a stable location (probably $GIT_DIR, or even
the object directory) and use that as the relative base,
turning the result into an absolute path. However, given
the history, at this point the minimal fix is to match the
pre-670c359da behavior.
We can do this simply by ignoring the error when we have no
relative base and using the original value (which we now
reliably have, thanks to strbuf_normalize_path()).
That still leaves us with a relative path that foils our
duplicate detection, and may act strangely if we ever
chdir() later in the process. We could solve that by storing
an absolute path based on getcwd(). That may be a good
future direction; for now we'll do just the minimum to fix
the regression.
The new t5615 script demonstrates the fix in its final three
tests. Since we didn't have any tests of the alternates
environment variable at all, it also adds some tests of
absolute paths.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Avoid unwanted coding patterns (prodigal use of pipelines), and in
particular a useless use of cat.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Some versions of uniq -c write the count left-justified, other version
write it right-justified. Be prepared for both kinds.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
The rot13-filter.pl script calls methods on implicitly
defined filehandles (STDOUT, and the result of an open()
call). Prior to perl 5.13, these methods are not
automatically loaded, and perl will complain with:
Can't locate object method "flush" via package "IO::Handle"
Let's explicitly load IO::File (which inherits from
IO::Handle). That's more than we need for just "flush", but
matches what perl has done since:
http://perl5.git.perl.org/perl.git/commit/15e6cdd91beb4cefae4b65e855d68cf64766965d
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rot13-filter.pl script hardcodes "#!/usr/bin/perl", and
does not respect $PERL_PATH at all. That is a problem if the
system does not have perl at that path, or if it has a perl
that is too old to run a complicated script like the
rot13-filter (but PERL_PATH points to a more modern one).
We can fix this by using write_script() to create a new copy
of the script with the correct #!-line. In theory we could
move the whole script inside t0021-conversion.sh rather than
having it as an auxiliary file, but it's long enough that
it just makes things harder to read.
As a bonus, we can stop using the full path to the script in
the filter-process config we add (because the trash
directory is in our PATH). Not only is this shorter, but it
sidesteps any shell-quoting issues. The original was broken
when $TEST_DIRECTORY contained a space, because it was
interpolated in the outer script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We create a rot13.sh script in the trash directory, but need
to call it by its full path when we have moved our cwd to
another directory. Let's just put $TEST_ROOT in our $PATH so
that the script is always found.
This is a minor convenience for rot13.sh, but will be a
major one when we switch rot13-filter.pl to a script in the
same directory, as it means we will not have to deal with
shell quoting inside the filter-process config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This avoids us fooling around with $SHELL_PATH and the
executable bit ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update to the test framework made in 2.9 timeframe broke running
the tests under valgrind, which has been fixed.
* nd/test-helpers:
valgrind: support test helpers
|
|
The user always has to say "stash@{$N}" when naming a single
element in the default location of the stash, i.e. reflogs in
refs/stash. The "git stash" command learned to accept "git stash
apply 4" as a short-hand for "git stash apply stash@{4}".
* aw/numbered-stash:
stash: allow stashes to be referenced by index only
|
|
Update "interpret-trailers" machinery and teaches it that people in
real world write all sorts of crufts in the "trailer" that was
originally designed to have the neat-o "Mail-Header: like thing"
and nothing else.
* jt/trailer-with-cruft:
trailer: support values folded to multiple lines
trailer: forbid leading whitespace in trailers
trailer: allow non-trailers in trailer block
trailer: clarify failure modes in parse_trailer
trailer: make args have their own struct
trailer: streamline trailer item create and add
trailer: use list.h for doubly-linked list
trailer: improve const correctness
|
|
The smudge/clean filter API expect an external process is spawned
to filter the contents for each path that has a filter defined. A
new type of "process" filter API has been added to allow the first
request to run the filter for a path to spawn a single process, and
all filtering need is served by this single process for multiple
paths, reducing the process creation overhead.
* ls/filter-process:
contrib/long-running-filter: add long running filter example
convert: add filter.<driver>.process option
convert: prepare filter.<driver>.process option
convert: make apply_filter() adhere to standard Git error handling
pkt-line: add functions to read/write flush terminated packet streams
pkt-line: add packet_write_gently()
pkt-line: add packet_flush_gently()
pkt-line: add packet_write_fmt_gently()
pkt-line: extract set_packet_header()
pkt-line: rename packet_write() to packet_write_fmt()
run-command: add clean_on_exit_handler
run-command: move check_pipe() from write_or_die to run_command
convert: modernize tests
convert: quote filter names in error messages
|
|
Tests run with --valgrind call git commands through a wrapper script
that invokes valgrind on them. This script (valgrind.sh) is in turn
invoked through symlinks created for each command in t/valgrind/bin/.
Since e6e7530d (test helpers: move test-* to t/helper/ subdirectory)
these symlinks have been broken for test helpers -- they point to the
old locations in the root of the build directory. Fix that by teaching
the code for creating the links about the new location of the binaries,
and do the same in the wrapper script to allow it to find its payload.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
|
|
Update of the sequencer codebase to make it reusable to reimplement
"rebase -i" continues.
* js/prepare-sequencer: (27 commits)
sequencer: mark all error messages for translation
sequencer: start error messages consistently with lower case
sequencer: quote filenames in error messages
sequencer: mark action_name() for translation
sequencer: remove overzealous assumption in rebase -i mode
sequencer: teach write_message() to append an optional LF
sequencer: refactor write_message() to take a pointer/length
sequencer: roll back lock file if write_message() failed
sequencer: stop releasing the strbuf in write_message()
sequencer: left-trim lines read from the script
sequencer: support cleaning up commit messages
sequencer: support amending commits
sequencer: allow editing the commit message on a case-by-case basis
sequencer: introduce a helper to read files written by scripts
sequencer: prepare for rebase -i's commit functionality
sequencer: remember the onelines when parsing the todo file
sequencer: get rid of the subcommand field
sequencer: avoid completely different messages for different actions
sequencer: strip CR from the todo script
sequencer: completely revamp the "todo" script parsing
...
|
|
A minor regression fix for "git submodule".
* sb/submodule-ignore-trailing-slash:
t0060: sidestep surprising path mangling results on Windows
submodule: ignore trailing slash in relative url
submodule: ignore trailing slash on superproject URL
|
|
These test helper programs access the index, but do not ever
setup_git_directory(), meaning we just blindly looked in
".git/index". This happened to work for the purposes of our
tests (which do not run from subdirectories, nor in
non-repos), but it's a bad habit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An empty string used as a pathspec element has always meant
'everything matches', but it is too easy to write a script that
finds a path to remove in $path and run 'git rm "$paht"', which
ends up removing everything. Start warning about this use of an
empty string used for 'everything matches' and ask users to use a
more explicit '.' for that instead.
The hope is that existing users will not mind this change, and
eventually the warning can be turned into a hard error, upgrading
the deprecation into removal of this (mis)feature.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: warn on empty strings as pathspec
|
|
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
|
|
"git send-email" attempts to pick up valid e-mails from the
trailers, but people in real world write non-addresses there, like
"Cc: Stable <add@re.ss> # 4.8+", which broke the output depending
on the availability and vintage of Mail::Address perl module.
* mm/send-email-cc-cruft-after-address:
Git.pm: add comment pointing to t9000
t9000-addresses: update expected results after fix
parse_mailboxes: accept extra text after <...> address
|
|
A recently graduated topic regressed "git rev-list --header"
output, breaking "gitweb". This has been fixed.
* jk/diff-submodule-diff-inline:
rev-list: use hdr_termination instead of a always using a newline
|
|
A hot-fix for a test added by a recent topic that went to both
'master' and 'maint' already.
* tg/add-chmod+x-fix:
t3700: fix broken test under !SANITY
|
|
Test clean-up.
* pb/test-parse-options-expect:
t0040: convert all possible tests to use `test-parse-options --expect`
|
|
More i18n.
* va/i18n:
i18n: diff: mark warnings for translation
i18n: credential-cache--daemon: mark advice for translation
i18n: convert mark error messages for translation
i18n: apply: mark error message for translation
i18n: apply: mark error messages for translation
i18n: apply: mark info messages for translation
i18n: apply: mark plural string for translation
|
|
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
|
|
"git rebase" immediately after "git clone" failed to find the fork
point from the upstream.
* jk/merge-base-fork-point-without-reflog:
merge-base: handle --fork-point without reflog
|
|
A test fixup to recently graduated topic.
* jk/ambiguous-short-object-names:
t1512: become resilient to GETTEXT_POISON build
|