| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Portability fix for tests added recently.
* cb/test-use-ere-for-alternation:
t: avoid alternation (not POSIX) in grep's BRE
|
|
f1e3df3169 (t: increase test coverage of signature verification output,
2020-03-04) adds GPG dependent tests to t4202 and t6200 that were found
problematic with at least OpenBSD 6.7.
Using an escaped '|' for alternations works only in some implementations
of grep (e.g. GNU and busybox).
It is not part of POSIX[1] and not supported by some BSD, macOS, and
possibly other POSIX compatible implementations.
Use `grep -E`, and write it using extended regular expression.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update an unconditional use of "grep -a" with a perl script in a test.
* dd/t5703-grep-a-fix:
t5703: replace "grep -a" usage by perl
|
|
Test fix.
* gs/commit-graph-path-filter:
t4216: avoid unnecessary subshell in test_bloom_filters_not_used
|
|
Test fix.
* dl/merge-autostash:
t5520: avoid alternation in grep's BRE (not POSIX)
|
|
Test-coverage enhancement.
* jt/avoid-prefetch-when-able-in-diff:
t4067: make rename detection test output raw diff
|
|
Platform dependent tweak to a test for HP-PA.
* gp/hppa-stack-test-fix:
tests: skip small-stack tests on hppa architecture
|
|
Instead of using a BRE, that broke tests 30-32, 37-39, 42 at least with
OpenBSD 6.7; use a simpler ERE.
Fixes: d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Seems to trigger a bug in at least OpenBSD's 6.7 sh where it is
interpreted as a history lookup and therefore fails 125-126, 128,
130.
Remove the subshell and get a space between ! and grep, so tests
pass successfully.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent attempt to make the test output nicer to view on CI
systems broke TAP output under bash. The effort has been reverted
to be re-attempted in the next cycle.
* jc/fix-tap-output-under-bash:
Revert "tests: when run in Bash, annotate test failures with file name/line number"
Revert "ci: add a problem matcher for GitHub Actions"
Revert "t/test_lib: avoid naked bash arrays in file_lineno"
|
|
When a binary file gets modified and renamed on both sides of history
to different locations, both files would be written to the working
tree but both would have the contents from "ours". This has been
corrected so that the path from each side gets their original content.
* en/merge-rename-rename-worktree-fix:
merge-recursive: fix rename/rename(1to2) for working tree with a binary
|
|
A few tests were not i18n clean.
* dd/t1509-i18n-fix:
t1509: correct i18n test
|
|
95acf11a3d ("diff: restrict when prefetching occurs", 2020-04-07) taught
diff to prefetch blobs in a more limited set of situations. These
limited situations include when the output format requires blob data,
and when inexact rename detection is needed.
There is an existing test case that tests inexact rename detection, but
it also uses an output format that requires blob data, resulting in the
inexact-rename-detection-only code not being tested. Update this test to
use the raw output format, which does not require blob data.
Thanks to Derrick Stolee for noticing this lapse in code coverage and
for doing the preliminary analysis [1].
[1] https://lore.kernel.org/git/853759d3-97c3-241f-98e1-990883cd204e@gmail.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On some platforms likes HP-UX, grep(1) doesn't understand "-a".
Let's switch to perl.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On hppa these tests crash because the allocated stack space is too
small, even after it was doubled in b9a190789 (and the data size
doubled to match) to make it work on powerpc. For this arch just
skip these tests, which is enough to make the whole suite pass.
Fixes: https://bugs.debian.org/757402
Based-on-patch-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Greg Price <gnprice@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
number"
This reverts commit 662f9cf1548cf069cb819e9e95f224657015fcf9,
to fix the TAP output broken for bash.
|
|
This reverts commit 303775a25f0b4ac5d6ad2e96eb4404c24209cad8;
instead of trying to salvage the tap-breaking change, let's
revert the whole thing for now.
|
|
Teach codepaths that show progress meter to also use the
start_progress() and the stop_progress() calls as a "region" to be
traced.
* es/trace-log-progress:
trace2: log progress time and throughput
|
|
Test fix for a topic already in 'master' and meant for 'maint'.
* jt/t5500-unflake:
t5500: count objects through stderr, not trace
|
|
"git multi-pack-index repack" has been taught to honor some
repack.* configuration variables.
* sn/midx-repack-with-config:
multi-pack-index: respect repack.packKeptObjects=false
midx: teach "git multi-pack-index repack" honor "git repack" configurations
|
|
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
|
|
"git fsck" ensures that the paths recorded in tree objects are
sorted and without duplicates, but it failed to notice a case where
a blob is followed by entries that sort before a tree with the same
name. This has been corrected.
* rs/fsck-duplicate-names-in-trees:
fsck: report non-consecutive duplicate names in trees
|
|
"git p4" learned to recover from a (broken) state where a directory
and a file are recorded at the same path in the Perforce repository
the same way as their clients do.
* ao/p4-d-f-conflict-recover:
git-p4: recover from inconsistent perforce history
|
|
"rebase -i" segfaulted when rearranging a sequence that has a
fix-up that applies another fix-up (which may or may not be a
fix-up of yet another step).
* js/rebase-autosquash-double-fixup-fix:
rebase --autosquash: fix a potential segfault
|
|
"git bisect replay" had trouble with input files when they used
CRLF line ending, which has been corrected.
* cw/bisect-replay-with-dos:
bisect: allow CRLF line endings in "git bisect replay" input
|
|
"git bugreport" learned to report enabled hooks in the repository.
* es/bugreport-with-hooks:
bugreport: collect list of populated hooks
|
|
With a rename/rename(1to2) conflict, we attempt to do a three-way merge
of the file contents, so that the correct contents can be placed in the
working tree at both paths. If the file is a binary, however, no
content merging is possible and we should just use the original version
of the file at each of the paths.
Reported-by: Chunlin Zhang <zhangchunlin@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Serving a "git fetch" client over "git://" and "ssh://" protocols
using the on-wire protocol version 2 was buggy on the server end
when the client needs to make a follow-up request to
e.g. auto-follow tags.
* cc/upload-pack-v2-fetch-fix:
upload-pack: clear filter_options for each v2 fetch command
|
|
Code clean-up.
* dd/bloom-sparse-fix:
bloom: fix `make sparse` warning
|
|
The object walk with object filter "--filter=tree:0" can now take
advantage of the pack bitmap when available.
* tb/bitmap-walk-with-tree-zero-filter:
pack-bitmap: pass object filter to fill-in traversal
pack-bitmap.c: support 'tree:0' filtering
pack-bitmap.c: make object filtering functions generic
list-objects-filter: treat NULL filter_options as "disabled"
|
|
git-init(1)'s messages is subjected to i18n.
They should be tested by test_i18n* family.
Fix them.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than teaching only one operation, like 'git fetch', how to write
down throughput to traces, we can learn about a wide range of user
operations that may seem slow by adding tooling to the progress library
itself. Operations which display progress are likely to be slow-running
and the kind of thing we want to monitor for performance anyways. By
showing object counts and data transfer size, we should be able to
make some derived measurements to ensure operations are scaling the way
we expect.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As diff_tree_oid() computes a diff, it will terminate early if the
total number of changed paths is strictly larger than max_changes.
This includes the directories that changed, not just the file paths.
However, only the file paths are reflected in the resulting diff
queue's "nr" value.
Use the "num_changes" from diffopt to check if the diff terminated
early. This is incredibly important, as it can result in incorrect
filters! For example, the first commit in the Linux kernel repo
reports only 471 changes, but since these are nested inside several
directories they expand to 513 "real" changes, and in fact the
total list of changes is not reported. Thus, the computed filter
for this commit is incorrect.
Demonstrate the subtle difference by using one fewer file change
in the 'get bloom filter for commit with 513 changes' test. Before,
this edited 513 files inside "bigDir" which hit this inequality.
However, dropping the file count by one demonstrates how the
previous inequality was incorrect but the new one is correct.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When computing a changed-path Bloom filter, we need to take the
files that changed from the diff computation and extract the parent
directories. That way, a directory pathspec such as "Documentation"
could match commits that change "Documentation/git.txt".
However, the current code does a poor job of this process. The paths
are added to a hashmap, but we do not check if an entry already
exists with that path. This can create many duplicate entries and
cause the filter to have a much larger length than it should. This
means that the filter is more sparse than intended, which helps the
false positive rate, but wastes a lot of space.
Properly use hashmap_get() before hashmap_add(). Also be sure to
include a comparison function so these can be matched correctly.
This has an effect on a test in t0095-bloom.sh. This makes sense,
there are ten changes inside "smallDir" so the total number of
paths in the filter should be 11. This would result in 11 * 10 bits
required, and with 8 bits per byte, this results in 14 bytes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tree entries are sorted in path order, meaning that directory names get
a slash ('/') appended implicitly. Git fsck checks if trees contains
consecutive duplicates, but due to that ordering there can be
non-consecutive duplicates as well if one of them is a directory and the
other one isn't. Such a tree cannot be fully checked out.
Find these duplicates by recording candidate file names on a stack and
check candidate directory names against that stack to find matches.
Suggested-by: Brandon Williams <bwilliamseng@gmail.com>
Original-test-by: Brandon Williams <bwilliamseng@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Perforce allows you commit files and directories with the same name,
so you could have files //depot/foo and //depot/foo/bar both checked
in. A p4 sync of a repository in this state fails. Deleting one of
the files recovers the repository.
When this happens we want git-p4 to recover in the same way as
perforce.
Note that Perforce has this change in their 2017.1 version:
Bugs fixed in 2017.1
#1489051 (Job #2170) **
Submitting a file with the same name as an existing depot
directory path (or vice versa) will now be rejected.
so people hopefully will not creating damaged Perforce repos
anymore, but "git p4" needs to be able to interact with already
corrupt ones.
Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When selecting a batch of pack-files to repack in the "git
multi-pack-index repack" command, Git should respect the
repack.packKeptObjects config option. When false, this option says that
the pack-files with an associated ".keep" file should not be repacked.
This config value is "false" by default.
There are two cases for selecting a batch of objects. The first is the
case where the input batch-size is zero, which specifies "repack
everything". The second is with a non-zero batch size, which selects
pack-files using a greedy selection criteria. Both of these cases are
updated and tested.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rearranging the todo list so that the fixups/squashes are reordered
just after the commits they intend to fix up, we use two arrays to
maintain that list: `next` and `tail`.
The idea is that `next[i]`, if set to a non-negative value, contains the
index of the item that should be rearranged just after the `i`th item.
To avoid having to walk the entire `next` chain when appending another
fixup/squash, we also store the end of the `next` chain in `tail[i]`.
The logic we currently use to update these array items is based on the
assumption that given a fixup/squash item at index `i`, we just found
the index `i2` indicating the first item in that fixup chain.
However, as reported by Paul Ganssle, that need not be true: the special
form `fixup! <commit-hash>` is allowed to point to _another_ fixup
commit in the middle of the fixup chain.
Example:
* 0192a To fixup
* 02f12 fixup! To fixup
* 03763 fixup! To fixup
* 04ecb fixup! 02f12
Note how the fourth commit targets the second commit, which is already a
fixup that targets the first commit.
Previously, we would update `next` and `tail` under our assumption that
every `fixup!` commit would find the start of the `fixup!`/`squash!`
chain. This would lead to a segmentation fault because we would actually
end up with a `next[i]` pointing to a `fixup!` but the corresponding
`tail[i]` pointing nowhere, which would the lead to a segmentation
fault.
Let's fix this by _inserting_, rather than _appending_, the item. In
other words, if we make a given line successor of another line, we do
not simply forget any previously set successor of the latter, but make
it a successor of the former.
In the above example, at the point when we insert 04ecb just after
02f12, 03763 would already be recorded as a successor of 04ecb, and we
now "squeeze in" 04ecb.
To complete the idea, we now no longer assume that `next[i]` pointing to
a line means that `last[i]` points to a line, too. Instead, we extend
the concept of `last` to cover also partial `fixup!`/`squash!` chains,
i.e. chains starting in the middle of a larger such chain.
In the above example, after processing all lines, `last[0]`
(corresponding to 0192a) would point to 03763, which indeed is the end
of the overall `fixup!` chain, and `last[1]` (corresponding to 02f12)
would point to 04ecb (which is the last `fixup!` targeting 02f12, but it
has 03763 as successor, i.e. it is not the end of overall `fixup!`
chain).
Reported-by: Paul Ganssle <paul@ganssle.io>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent change to show files and line numbers of a breakage during
test (only available when running the tests with bash) were hurting
other shells with syntax errors, which has been corrected.
* cb/test-bash-lineno-fix:
t/test_lib: avoid naked bash arrays in file_lineno
|
|
The basic test did not honor $TEST_SHELL_PATH setting, which has
been corrected.
* cb/t0000-use-the-configured-shell:
t/t0000-basic: make sure subtests also use TEST_SHELL_PATH
|
|
"git restore --staged --worktree" now defaults to take the contents
out of "HEAD", instead of erring out.
* es/restore-staged-from-head-by-default:
restore: default to HEAD when combining --staged and --worktree
|
|
The sparse-checkout patterns have been forbidden from excluding all
paths, leaving an empty working tree, for a long time. This
limitation has been lifted.
* ds/sparse-allow-empty-working-tree:
sparse-checkout: stop blocking empty workdirs
|
|
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
|
|
The userdiff patterns for Markdown documents have been added.
* ah/userdiff-markdown:
userdiff: support Markdown
|
|
With the recent tightening of the code that is used to parse
various parts of a URL for use in the credential subsystem, a
hand-edited credential-store file causes the credential helper to
die, which is a bit too harsh to the users. Demote the error
behaviour to just ignore and keep using well-formed lines instead.
* cb/credential-store-ignore-bogus-lines:
credential-store: ignore bogus lines from store file
credential-store: document the file format a bit more
|
|
Because of the request/response model of protocol v2, the
upload_pack_v2() function is sometimes called twice in the same
process, while 'struct list_objects_filter_options filter_options'
was declared as static at the beginning of 'upload-pack.c'.
This made the check in list_objects_filter_die_if_populated(), which
is called by process_args(), fail the second time upload_pack_v2() is
called, as filter_options had already been populated the first time.
To fix that, filter_options is not static any more. It's now owned
directly by upload_pack(). It's now also part of 'struct
upload_pack_data', so that it's owned indirectly by upload_pack_v2().
In the long term, the goal is to also have upload_pack() use
'struct upload_pack_data', so adding filter_options to this struct
makes more sense than to have it owned directly by upload_pack_v2().
This fixes the first of the 2 bugs documented by d0badf8797
(partial-clone: demonstrate bugs in partial fetch, 2020-02-21).
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We advertise that the bisect log can be corrected in your editor
before being fed to "git bisect replay", but some editors may
turn the line endings to CRLF.
Update the parser of the input lines so that the CR at the end of
the line gets ignored.
Were anyone to intentionally be using terms/revs with embedded CRs,
replaying such bisects will no longer work with this change. I suspect
that this is incredibly rare.
Signed-off-by: Christopher Warrington <chwarr@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Occasionally a failure a user is seeing may be related to a specific
hook which is being run, perhaps without the user realizing. While the
contents of hooks can be sensitive - containing user data or process
information specific to the user's organization - simply knowing that a
hook is being run at a certain stage can help us to understand whether
something is going wrong.
Without a definitive list of hook names within the code, we compile our
own list from the documentation. This is likely prone to bitrot, but
designing a single source of truth for acceptable hooks is too much
overhead for this small change to the bugreport tool.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* We need a `final_new_line` to make our source code as text file, per
POSIX and C specification.
* `bloom_filters` should be limited to interal linkage only
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
662f9cf154 (tests: when run in Bash, annotate test failures with file
name/line number, 2020-04-11), introduces a way to report the location
(file:lineno) of a failed test case by traversing the bash callstack.
The implementation requires bash and uses shell arrays and is therefore
protected by a guard but NetBSD sh will still have to parse the function
and therefore will result in:
** t0000-basic.sh ***
./test-lib.sh: 681: Syntax error: Bad substitution
Enclose the bash specific code inside an eval to avoid parsing errors in
the same way than 5826b7b595 (test-lib: check Bash version for '-x'
without using shell arrays, 2019-01-03)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Carlo Marcelo Arenas Belón
Jonathan Tan
Đoàn Trần Công Danh
Greg Price
Elijah Newren
Emily Shaffer
Derrick Stolee
René Scharfe
Andrew Oakley
Johannes Schindelin
Christian Couder
Christopher Warrington