| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to adjust t0060 for the new default branch name `main`.
This name is two characters shorter and therefore needs two spaces more
padding to align correctly.
Adjusting the alignment before the big search-and-replace makes it
easier to verify that the final result does not leave any misaligned
lines behind.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
js/default-branch-name-tests-final-stretch
* jk/diff-release-filespec-fix:
t7800: simplify difftool test
diff: allow passing NULL to diff_free_filespec_data()
|
|
"git blame --ignore-revs-file=<file>" learned to ignore a
non-existent object name in the input, instead of complaining.
* jc/blame-ignore-fix:
blame: silently ignore invalid ignore file objects
|
|
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
|
|
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
"git rebase -i" did not store ORIG_HEAD correctly.
* pw/rebase-i-orig-head:
rebase -i: simplify get_revision_ranges()
rebase -i: use struct object_id when writing state
rebase -i: use struct object_id rather than looking up commit
rebase -i: stop overwriting ORIG_HEAD buffer
|
|
"git format-patch --output=there" did not work as expected and
instead crashed. The option is now supported.
* jk/format-patch-output:
format-patch: support --output option
format-patch: tie file-opening logic to output_directory
format-patch: refactor output selection
|
|
"git log -L<range>:<path>" is documented to take no pathspec, but
this was not enforced by the command line option parser, which has
been corrected.
* jc/line-log-takes-no-pathspec:
log: diagnose -L used with pathspec as an error
|
|
Add t/perf support for fsmonitor.
* nk/perf-fsmonitor:
t/perf/fsmonitor: add benchmark for dirty status
t/perf/fsmonitor: perf comparison of multiple fsmonitor integrations
t/perf/fsmonitor: initialize test with git reset
t/perf/fsmonitor: factor setup for fsmonitor into function
t/perf/fsmonitor: silence initial git commit
t/perf/fsmonitor: shorten DESC to basename
t/perf/fsmonitor: factor description out for readability
t/perf/fsmonitor: improve error message if typoing hook name
t/perf/fsmonitor: move watchman setup to one-time-repo-setup
t/perf/fsmonitor: separate one time repo initialization
|
|
Preparation for a new merge strategy.
* en/merge-tests:
t6423: add more details about direct resolution of directories
t6423: note improved ort handling with untracked files
t6423, t6436: note improved ort handling with dirty files
merge tests: expect slight differences in output for recursive vs. ort
t6423: expect improved conflict markers labels in the ort backend
t6404, t6423: expect improved rename/delete handling in ort backend
t6416: correct expectation for rename/rename(1to2) + directory/file
merge tests: expect improved directory/file conflict handling in ort
t/: new helper for tests that pass with ort but fail with recursive
|
|
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5515:
t5515: use `main` as the name of the main branch for testing (conclusion)
t5515: use `main` as the name of the main branch for testing (part 3)
t5515: use `main` as the name of the main branch for testing (part 2)
t5515: use `main` as the name of the main branch for testing (part 1)
|
|
"git fetch --depth=<n>" over the stateless RPC / smart HTTP
transport handled EOF from the client poorly at the server end.
* dd/upload-pack-stateless-eof:
upload-pack: allow stateless client EOF just prior to haves
|
|
Test clean-up.
* js/test-file-size:
tests: consolidate the `file_size` function into `test-lib-functions.sh`
|
|
Test code clean-up.
* js/test-whitespace-fixes:
t9603: use tabs for indentation
t5570: remove trailing padding
t5400,t5402: consistently indent with tabs, not with spaces
t3427: adjust stale comment
t3406: indent with tabs, not spaces
t1004: insert missing "branch" in a message
|
|
Typofix.
* rs/worktree-list-show-locked:
t2402: fix typo
|
|
The new test added by the previous commit can be simplified a lot.
Let's do so.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 610e2b9240 (blame: validate and peel the object names on the
ignore list, 2020-09-24) git blame reports checks if objects specified
with --ignore-rev and in files loaded with --ignore-revs-file and config
option blame.ignoreRevsFile are actual objects and dies if they aren't.
The intent is to report typos to the user.
This also breaks the ability to use a single ignore file for multiple
repositories. Typos are presumably less likely in files than on the
command line, so alerting is less useful here. Restore that feature by
skipping non-commits without dying.
Reported-by: Jean-Yves Avenard <jyavenard@mozilla.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5411:
t5411: finish preparing for `main` being the default branch name
t5411: adjust the remaining support files for init.defaultBranch=main
t5411: start adjusting the support files for init.defaultBranch=main
t5411: start using the default branch name "main"
|
|
Zsh autocompletion (in contrib/) update.
* fc/zsh-completion: (29 commits)
zsh: update copyright notices
completion: bash: remove old compat wrappers
completion: bash: cleanup cygwin check
completion: bash: trivial cleanup
completion: zsh: add simple version check
completion: zsh: trivial simplification
completion: zsh: add alias descriptions
completion: zsh: improve command tags
completion: zsh: refactor command completion
completion: zsh: shuffle functions around
completion: zsh: simplify file_direct
completion: zsh: simplify nl_append
completion: zsh: trivial cleanup
completion: zsh: simplify direct compadd
completion: zsh: simplify compadd functions
completion: zsh: fix splitting of words
completion: zsh: add missing direct_append
completion: fix conflict with bashcomp
completion: zsh: fix completion for --no-.. options
completion: bash: remove zsh wrapper
...
|
|
The code to detect premature EOF in the sideband demultiplexer has
been cleaned up.
* jk/sideband-more-error-checking:
sideband: diagnose more sideband anomalies
|
|
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
|
|
A commit and tag object may have CR at the end of each and
every line (you can create such an object with hash-object or
using --cleanup=verbatim to decline the default clean-up
action), but it would make it impossible to have a blank line
to separate the title from the body of the message. Be lenient
and accept a line with lone CR on it as a blank line, too.
* pb/ref-filter-with-crlf:
log, show: add tests for messages containing CRLF
ref-filter: handle CRLF at end-of-line more gracefully
|
|
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
|
|
Dev support.
* jk/perl-warning:
perl: check for perl warnings while running tests
|
|
"git diff" and other commands that share the same machinery to
compare with working tree files have been taught to take advantage
of the fsmonitor data when available.
* nk/diff-files-vs-fsmonitor:
p7519-fsmonitor: add a git add benchmark
p7519-fsmonitor: refactor to avoid code duplication
perf lint: add make test-lint to perf tests
t/perf: add fsmonitor perf test for git diff
t/perf/p7519-fsmonitor.sh: warm cache on first git status
t/perf/README: elaborate on output format
fsmonitor: use fsmonitor data in `git diff`
|
|
Micro clean-up of a couple of test scripts.
* as/tests-cleanup:
t2200,t9832: avoid using 'git' upstream in a pipe
|
|
More preliminary tests have been added to document desired outcome
of various "directory rename" situations.
* en/dir-rename-tests:
t6423: more involved rules for renaming directories into each other
t6423: update directory rename detection tests with new rule
t6423: more involved directory rename test
directory-rename-detection.txt: update references to regression tests
|
|
This patch will let the new `check-whitespace` GitHub workflow be happy
with the upcoming patch series that wants to search-and-replace `master`
with `main` in t9603 and some other test scripts.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two blocks in t5570 want to align the closing double quotes, padding
with spaces if needed. Since the maximum length of those lines is
defined by the branch name `master`, the upcoming rename to `main` would
unalign the quotes.
But then, it is unclear how those aligned closing quotes should help
readability anyway, so let's just remove that padding altogether.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch actually prepares for the upcoming patches to replace
`master` with `main` in these tests: we do not want those changes to be
flagged by the new `check-whitespace` GitHub workflow (even if those
changes do not introduce the whitespace issues, they touch lines
affected by those issues without fixing them).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In b6211b89eb3 (tests: avoid variations of the `master` branch name,
2020-09-26), the `master[123]` branch names were renamed to
`topic_[123]`. A non-literal mention of the corresponding files was
missed in that commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The message in question reads awkward with the name "master", but will
be even more confusing once that is renamed to "main". Let's adjust it
in advance of said rename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8de7eeb54b6 (compression: unify pack.compression configuration
parsing, 2016-11-15), we introduced identical copies of the `file_size`
helper into three test scripts, with the plan to eventually consolidate
them into a single copy.
Let's do that, and adjust the function name to adhere to the `test_*`
naming convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 3aef54e8b8 ("diff: munmap() file contents before running external
diff") introduced calls to diff_free_filespec_data in
run_external_diff, which may pass NULL pointers.
Fix this and prevent any such bugs in the future by making
`diff_free_filespec_data(NULL)` a no-op.
Fixes: 3aef54e8b8 ("diff: munmap() file contents before running external diff")
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After rebasing, ORIG_HEAD is supposed to point to the old HEAD of the
rebased branch. The code used find_unique_abbrev() to obtain the
object name of the old HEAD and wrote to both
.git/rebase-merge/orig-head (used by `rebase --abort` to go back to
the previous state) and to ORIG_HEAD. The buffer find_unique_abbrev()
gives back is volatile, unfortunately, and was overwritten after the
former file is written but before ORIG_FILE is written, leaving an
incorrect object name in it.
Avoid relying on the volatile buffer of find_unique_abbrev(), and
instead supply our own buffer to keep the object name.
I think that all of the users of head_hash should actually be using
opts->orig_head instead as passing a string rather than a struct
object_id around is a hang over from the scripted implementation. This
patch just fixes the immediate bug and adds a regression test based on
Caspar's reproduction example[1]. The users will be converted to use
struct object_id and head_hash removed in the next few commits.
[1] https://lore.kernel.org/git/CAFzd1+7PDg2PZgKw7U0kdepdYuoML9wSN4kofmB_-8NHrbbrHg@mail.gmail.com
Reported-by: Caspar Duregger <herr.kaste@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -L option is documented to accept no pathspec, but the
command line option parser has allowed the combination without
checking so far. Ensure that there is no pathspec when the -L
option is in effect to fix this.
Incidentally, this change fixes another bug in the command line
option parser, which has allowed the -L option used together
with the --follow option. Because the latter requires exactly
one path given, but the former takes no pathspec, they become
mutually incompatible automatically. Because the -L option
follows renames on its own, there is no reason to give --follow
at the same time.
The new tests say they may fail with "-L and --follow being
incompatible" instead of "-L and pathspec being incompatible".
Currently the expected failure can come only from the latter, but
this is to futureproof them, in case we decide to add code to
explicititly die on -L and --follow used together.
Heled-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c57b3367bed (worktree: teach `list` to annotate locked worktree,
2020-10-11), we introduced a test case that wanted to talk about
"worktrees" but talked about "worktress" instead. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous three commits, We prepared the `t5515` script and the
files in `t/t5515/` for the upcoming change of the default branch name
to `main`. The changes were made over the course of three commits
because the overall patch would have been too big to send to the Git
mailing list for review.
Naturally, the test could not pass in the transitional stages and was
therefore disabled via the `PREPARE_FOR_MAIN_BRANCH` prereq. Now that
the transition is complete, we can re-enable it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous two commits, We just started preparing the `t5515` script
and part of `t/t5515/` for the upcoming change of the default
branch name to `main`. This patch adjusts the remainder of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515/refs.*
In addition to that, we need to adjust some file _names_ in `t/t5515/`
because they encode the branch name:
eval "$(git ls-files t/t5515/refs.\* | sed -n \
-e 's/\(.*\)master\(.*\)/git mv & \1main\2;/p')"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We just started preparing t5515 for the upcoming change of the default
branch name to `main`. This patch adjusts roughly half of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515/fetch.*
In addition to that, we need to adjust some file _names_ in `t/t5515/`
because they encode the branch name:
eval "$(git ls-files t/t5515/fetch.\* | sed -n \
-e 's/\(.*\)master\(.*\)/git mv & \1main\2;/p')"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of the effort to change the default branch name to `main`, let's
prepare t5515.
In addition to adjusting the references to the branch name itself, this
also requires two commit hashes to be adjusted (actually four, as there
is a SHA-1 _and_ a SHA-256 of both).
That trick was performed by running
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515-*.sh
These commit hashes have been determined manually, of course, by running
the test after adjusting only the branch names, and then copying the
hashes from the log of the failed run.
Note: this patch only touches the t5515 script so far, not the
supporting material in t/t5515/. The resulting patch would have weighed
over 100kB and therefore the Git mailing list would have dropped it. The
files in t/t5515/ will be adjusted in the next two commits. As t5515
would fail without these adjustments, we temporarily skip it via the
`PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
|
|
The userdiff pattern learned to identify the function definition in
POSIX shells and bash.
* ve/userdiff-bash:
userdiff: support Bash
|
|
Code clean-up.
* js/t7006-cleanup:
t7006: Use test_path_is_* functions in test script
|
Johannes Schindelin
Junio C Hamano
Jinoh Kang
René Scharfe
Phillip Wood
Jeff King