| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The --chain-lint option detects broken &&-chains by forcing the test to
exit early (as the very first step) with a sentinel value. If that
sentinel is the test's overall exit code, then the &&-chain is intact;
if not, then the chain is broken. Unfortunately, this detection does not
extend to &&-chains within subshells even when the subshell itself is
properly linked into the outer &&-chain.
Address this shortcoming by feeding the body of the test to a
lightweight "linter" which can peer inside subshells and identify broken
&&-chains by pure textual inspection. Although the linter does not
actually parse shell scripts, it has enough knowledge of shell syntax to
reliably deal with formatting style variations (as evolved over the
years) and to avoid being fooled by non-shell content (such as inside
here-docs and multi-line strings). It recognizes modern subshell
formatting:
statement1 &&
(
statement2 &&
statement3
) &&
statement4
as well as old-style:
statement1 &&
(statement2 &&
statement3) &&
statement4
Heuristics are employed to properly identify the extent of a subshell
formatted in the old-style since a number of legitimate constructs may
superficially appear to close the subshell even though they don't. For
example, it understands that neither "x=$(command)" nor "case $x in *)"
end a subshell, despite the ")" at the end of line.
Due to limitations of the tool used ('sed') and its inherent
line-by-line processing, only subshells one level deep are handled, as
well as one-liner subshells one level below that. Subshells deeper than
that or multi-line subshells at level two are passed through as-is, thus
&&-chains in their bodies are not checked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
* bc/hash-independent-tests: (28 commits)
t5300: abstract away SHA-1-specific constants
t4208: abstract away SHA-1-specific constants
t4045: abstract away SHA-1-specific constants
t4042: abstract away SHA-1-specific constants
t4205: sort log output in a hash-independent way
t/lib-diff-alternative: abstract away SHA-1-specific constants
t4030: abstract away SHA-1-specific constants
t4029: abstract away SHA-1-specific constants
t4029: fix test indentation
t4022: abstract away SHA-1-specific constants
t4020: abstract away SHA-1-specific constants
t4014: abstract away SHA-1-specific constants
t4008: abstract away SHA-1-specific constants
t4007: abstract away SHA-1-specific constants
t3905: abstract away SHA-1-specific constants
t3702: abstract away SHA-1-specific constants
t3103: abstract away SHA-1-specific constants
t2203: abstract away SHA-1-specific constants
t: skip pack tests if not using SHA-1
t4044: skip test if not using SHA-1
...
|
|
A test to see if the filesystem normalizes UTF-8 filename has been
updated to check what we need to know in a more direct way, i.e. a
path created in NFC form can be accessed with NFD form (or vice
versa) to cope with APFS as well as HFS.
* tb/test-apfs-utf8-normalization:
test: correct detection of UTF8_NFD_TO_NFC for APFS
|
|
Currently we have a variable, $_x40, which contains a regex that matches
a full 40-character hex constant. However, with NewHash, we'll have
object IDs that are longer than 40 characters. In such a case, $_x40
will be a confusing name. Create a $OID_REGEX variable which will
always reflect a regex matching the appropriate object ID, regardless of
the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently we have a variable, $_z40, which contains the all-zero object
ID. However, with NewHash, we'll have an all-zero object ID which is
longer than 40 hex characters. In such a case, $_z40 will be a
confusing name. Create a $ZERO_OID variable which will always reflect
the all-zeros object ID, regardless of the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some basic tests in our codebase that test that we get fixed
SHA-1 values. These are valuable because they make sure that our SHA-1
implementation is free of bugs, but obviously these tests will fail with
a different hash.
There are also tests which intentionally produce objects that have
collisions when truncated to a certain length to test our handling of
these cases. These tests, too, will fail with a different hash.
Add an SHA1 prerequisite to annotate both of these types of tests and
disable them when we're using a different hash. In the future, we will
create versions of these tests which handle both SHA-1 and NewHash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On HFS (which is the default Mac filesystem prior to High Sierra),
unicode names are "decomposed" before recording.
On APFS, which appears to be the new default filesystem in Mac OS High
Sierra, filenames are recorded as specified by the user.
APFS continues to allow the user to access it via any name
that normalizes to the same thing.
This difference causes t0050-filesystem.sh to fail two tests.
Improve the test for a NFD/NFC in test-lib.sh:
Test if the same file can be reached in pre- and decomposed unicode.
Reported-By: Elijah Newren <newren@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Tested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* jk/t5561-missing-curl:
t5561: skip tests if curl is not available
t5561: drop curl stderr redirects
|
|
It's possible to have libcurl installed but not the curl
command-line utility. The latter is not generally needed for
Git's http support, but we use it in t5561 for basic tests
of http-backend's functionality. Let's detect when it's
missing and skip this test.
Note that we can't mark the individual tests with the CURL
prerequisite. They're in a shared t556x_common that uses the
GET and POST functions as a level of indirection, and it's
only our implementations of those functions in t5561 that
requires curl. It's not a problem, though, as literally
every test in the script would depend on the prerequisite
anyway.
Reported-by: Jens Krüger <Jens.Krueger@frm2.tum.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test update.
* gs/test-unset-xdg-cache-home:
test-lib.sh: unset XDG_CACHE_HOME
|
|
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
|
|
Test update.
* gs/test-unset-xdg-cache-home:
test-lib.sh: unset XDG_CACHE_HOME
|
|
The previous patch resolved most of the test failures caused by
running our test suite with '-x' tracing and /bin/sh, and the
following patches in this series will resolve almost all of the
remaining failures. Unfortunately, not yet all.
Add means to disable '-x' tracing for individual test scripts by
setting the $test_untraceable variable to a non-empty value in the
test script before sourcing 'test-lib.sh'. However, since '-x'
tracing is not an issue with recent Bash versions supporting
BASH_XTRACEFD, i.e. v4.1 and later, don't disable tracing when the
test script is run with such a Bash version even when
$test_untraceable is set.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-i18ngrep:
t: make 'test_i18ngrep' more informative on failure
t: validate 'test_i18ngrep's parameters
t: move 'test_i18ncmp' and 'test_i18ngrep' to 'test-lib-functions.sh'
t5536: let 'test_i18ngrep' read the file without redirection
t5510: consolidate 'grep' and 'test_i18ngrep' patterns
t4001: don't run 'git status' upstream of a pipe
t6022: don't run 'git merge' upstream of a pipe
t5812: add 'test_i18ngrep's missing filename parameter
t5541: add 'test_i18ngrep's missing filename parameter
|
|
git respects XDG_CACHE_HOME for the credential cache. So, we should
unset XDG_CACHE_HOME for the test environment, lest a user's custom one
cause failure in the test.
For example, t/t0301-credential-cache.sh expects a default directory
to be used if it hasn't explicitly set XDG_CACHE_HOME.
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More tests for wildmatch functions.
* ab/wildmatch-tests:
wildmatch test: mark test as EXPENSIVE_ON_WINDOWS
test-lib: add an EXPENSIVE_ON_WINDOWS prerequisite
wildmatch test: create & test files on disk in addition to in-memory
wildmatch test: perform all tests under all wildmatch() modes
wildmatch test: use test_must_fail, not ! for test-wildmatch
wildmatch test: remove dead fnmatch() test code
wildmatch test: use a paranoia pattern from nul_match()
wildmatch test: don't try to vertically align our output
wildmatch test: use more standard shell style
wildmatch test: indent with tabs, not spaces
|
|
The build procedure for perl/ part has been greatly simplified by
weaning ourselves off of MakeMaker.
* ab/simplify-perl-makefile:
perl: treat PERLLIB_EXTRA as an extra path again
perl: avoid *.pmc and fix Error.pm further
Makefile: replace perl/Makefile.PL with simple make rules
|
|
Both 'test_i18ncmp' and 'test_i18ngrep' helper functions are supposed
to be called from our test scripts, so they should be in
'test-lib-functions.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an EXPENSIVE_ON_WINDOWS prerequisite to mark those tests which are
very expensive to run on Windows, but cheap elsewhere.
Certain tests that heavily stress the filesystem or run a lot of shell
commands are disproportionately expensive on Windows, this
prerequisite will later be used by a tests that runs in 4-8 seconds on
a modern Linux system, but takes almost 10 minutes on Windows.
There's no reason to skip such tests by default on other platforms,
but Windows users shouldn't need to wait around while they finish.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted fixes around running tests with "-x" tracing option.
* jk/test-suite-tracing:
t/Makefile: introduce TEST_SHELL_PATH
test-lib: make "-x" work with "--verbose-log"
t5615: avoid re-using descriptor 4
test-lib: silence "-x" cleanup under bash
|
|
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You may want to run the test suite with a different shell
than you use to build Git. For instance, you may build with
SHELL_PATH=/bin/sh (because it's faster, or it's what you
expect to exist on systems where the build will be used) but
want to run the test suite with bash (e.g., since that
allows using "-x" reliably across the whole test suite).
There's currently no good way to do this.
You might think that doing two separate make invocations,
like:
make &&
make -C t SHELL_PATH=/bin/bash
would work. And it _almost_ does. The second make will see
our bash SHELL_PATH, and we'll use that to run the
individual test scripts (or tell prove to use it to do so).
So far so good.
But this breaks down when "--tee" or "--verbose-log" is
used. Those options cause the test script to actually
re-exec itself using $SHELL_PATH. But wait, wouldn't our
second make invocation have set SHELL_PATH correctly in the
environment?
Yes, but test-lib.sh sources GIT-BUILD-OPTIONS, which we
built during the first "make". And that overrides the
environment, giving us the original SHELL_PATH again.
Let's introduce a new variable that lets you specify a
specific shell to be run for the test scripts. Note that we
have to touch both the main and t/ Makefiles, since we have
to record it in GIT-BUILD-OPTIONS in one, and use it in the
latter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "-x" tracing option implies "--verbose". This is a
problem when running under a TAP harness like "prove", where
we need to use "--verbose-log" instead. Instead, let's
handle this the same way we do for --valgrind, including the
recent fix from 88c6e9d31c (test-lib: --valgrind should not
override --verbose-log, 2017-09-05). Namely, let's enable
--verbose only when we know there isn't a more specific
verbosity option indicated.
Note that we also have to tweak `want_trace` to turn it on
(previously we just lumped $verbose_log in with $verbose,
but now we don't necessarily auto-set the latter).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the test suite's "-x" option is used with bash, we end
up seeing cleanup cruft in the output:
$ bash t0001-init.sh -x
[...]
++ diff -u expected actual
+ test_eval_ret_=0
+ want_trace
+ test t = t
+ test t = t
+ set +x
ok 42 - re-init from a linked worktree
This ranges from mildly annoying (for a successful test) to
downright confusing (when we say "last command exited with
error", but it's really 5 commands back).
We normally are able to suppress this cleanup. As the
in-code comment explains, we can't convince the shell not to
print it, but we can redirect its stderr elsewhere.
But since d88785e424 (test-lib: set BASH_XTRACEFD
automatically, 2016-05-11), that doesn't hold for bash. It
sends the "set -x" output directly to descriptor 4, not to
stderr.
We can fix this by also redirecting descriptor 4, and
paying close attention to which commands redirected and
which are not (see the updated comment).
Two alternatives I considered and rejected:
- unsetting and setting BASH_XTRACEFD; doing so closes the
descriptor, which we must avoid
- we could keep everything in a single block as before,
redirect 4>/dev/null there, but retain 5>&4 as a copy.
And then selectively restore 4>&5 for commands which
should be allowed to trace. This would work, but the
descriptor swapping seems unnecessarily confusing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add LIBPCRE1 and LIBPCRE2 prerequisites which are true when git is
compiled with USE_LIBPCRE1=YesPlease or USE_LIBPCRE2=YesPlease,
respectively.
The syntax of PCRE1 and PCRE2 isn't the same in all cases (see
pcresyntax(3) and pcre2syntax(3)). If test are added that test for
those they'll need to be guarded by these new prerequisites.
The subsequent patch will make use of LIBPCRE2, so LIBPCRE1 isn't
strictly needed for now, but let's add it for consistency and so that
checking for it doesn't have to be done with the less obvious "PCRE,
!LIBPCRE2", which while semantically the same is more confusing, and
would lead to bugs if PCRE v3 is ever released as the tests would mean
v1, not any non-v2 version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A test update.
* cb/t4201-robustify:
t4201: make use of abbreviation in the test more robust
|
|
A test update.
* cb/t4201-robustify:
t4201: make use of abbreviation in the test more robust
|
|
The test for '--abbrev' in t4201-shortlog.sh assumes that the commits
generated in the test can always be uniquely abbreviated to 5 hex digits
but this is not always the case. If you were unlucky and happened to run
the test at (say) Thu Jun 22 03:04:49 2017 +0000, you would find that
the first commit generated would collide with a tree object created
later in the same test.
This can be simulated in the version of t4201-shortlog.sh prior to this
commit by setting GIT_COMMITTER_DATE and GIT_AUTHOR_DATE to 1498100689
after sourcing test-lib.sh.
Change the test to test --abbrev=35 instead of --abbrev=5 to almost
completely avoid the possibility of a partial collision and add a call
to test_tick in the setup to make the test repeatable (the latter alone
is sufficient to make it robust enough).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/drop-sha1-entry-pos:
sha1-lookup: remove sha1_entry_pos() from header file
sha1_file: drop experimental GIT_USE_LOOKUP search
|
|
On Cygwin, "ulimit -s" does not report failure but it does not work
at all, which causes an unexpected success of some tests that
expect failures under a limited stack situation. This has been
fixed.
* rj/test-ulimit-on-windows:
t9010-*.sh: skip all tests if the PIPE prereq is missing
test-lib: use more compact expression in PIPE prerequisite
test-lib: don't use ulimit in test prerequisites on cygwin
|
|
A handful of tests to demonstrates a recursive implementation of
"name-rev" hurts.
* mg/name-rev-tests-with-short-stack:
t6120: test describe and name-rev with deep repos
t6120: clean up state after breaking repo
t6120: test name-rev --all and --stdin
t7004: move limited stack prereq to test-lib
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On cygwin (and MinGW), the 'ulimit' built-in bash command does not have
the desired effect of limiting the resources of new processes, at least
for the stack and file descriptors. However, it always returns success
and leads to several test prerequisites being erroneously set to true.
Add a check for cygwin and MinGW to the prerequisite expressions, using
a 'test_have_prereq !MINGW,!CYGWIN' clause, to guard against using ulimit.
This affects the prerequisite expressions for the ULIMIT_STACK_SIZE,
CMDLINE_LIMIT and ULIMIT_FILE_DESCRIPTORS prerequisites.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test simplification.
* rs/t1002-do-not-use-sum:
t1002: stop using sum(1)
|
|
The lazy prerequisite ULIMIT_STACK_SIZE is used only in t7004 so far.
Move it to test-lib.sh so that it can be used in other tests (which it will
be in a follow-up commit).
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already set ASAN_OPTIONS to abort if it finds any errors.
As we start to experiment with LSAN, the leak sanitizer,
it's convenient if we give it the same treatment.
Note that ASAN is actually a superset of LSAN and can do the
leak detection itself. So this only has an effect if you
specifically build with "make SANITIZE=leak" (leak detection
but not the rest of ASAN). Building with just LSAN results
in a build that runs much faster. That makes the
build-test-fix cycle more pleasant.
In the long run, once we've fixed or suppressed all the
leaks, it will probably be worth turning leak-detection on
for ASAN and just using that (to check both leaks _and_
memory errors in a single test run). But there's still a lot
of work before we get there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --verbose test option cannot be used with test harnesses
like "prove". Instead, you must use --verbose-log.
Since the --valgrind option implies --verbose, that means
that it cannot be used with prove. I.e., this does not work:
prove t0000-basic.sh :: --valgrind
You'd think it could be fixed by doing:
prove t0000-basic.sh :: --valgrind --verbose-log
but that doesn't work either, because the implied --verbose
takes precedence over --verbose-log. If the user has given
us a specific option, we should prefer that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test simplification.
* rs/t1002-do-not-use-sum:
t1002: stop using sum(1)
|
|
Code clean-up.
* jk/drop-sha1-entry-pos:
sha1_file: drop experimental GIT_USE_LOOKUP search
|
|
sum(1) is a command for calculating checksums of the contents of files.
It was part of early editions of Unix ("Research Unix", 1972/1973, [1]).
cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part
of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1).
We only use sum(1) in t1002 to check for changes in three files. On
MinGW we use md5sum(1) instead. We could switch to the standard command
cksum(1) for all platforms; MinGW comes with GNU coreutils now, which
provides sum(1), cksum(1) and md5sum(1). Use our standard method for
checking for file changes instead: test_cmp.
It's more convenient because it shows differences nicely, it's faster on
MinGW because we have a special implementation there based only on
shell-internal commands, it's simpler as it allows us to avoid stripping
out unnecessary entries from the checksum file using grep(1), and it's
more consistent with the rest of the test suite.
We already compare changed files with their expected new contents using
diff(1), so we don't need to check with "test_must_fail test_cmp" if
they differ from their original state. A later patch could convert the
direct diff(1) calls to test_cmp as well.
With all sum(1) calls gone, remove the MinGW-specific implementation
from test-lib.sh as well.
[1] http://minnie.tuhs.org/cgi-bin/utree.pl?file=V3/man/man1/sum.1
[2] http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.4BSD/usr/share/man/cat1/cksum.0
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/cksum.html
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago in 628522ec14 (sha1-lookup: more memory efficient
search in sorted list of SHA-1, 2007-12-29) we added
sha1_entry_pos(), a binary search that uses the uniform
distribution of sha1s to scale the selection of mid-points.
As this was a performance experiment, we tied it to the
GIT_USE_LOOKUP environment variable and never enabled it by
default.
This code was successful in reducing the number of steps in
each search. But the overhead of the scaling ends up making
it slower when the cache is warm. Here are best-of-five
timings for running rev-list on linux.git, which will have
to look up every object:
$ time git rev-list --objects --all >/dev/null
real 0m35.357s
user 0m35.016s
sys 0m0.340s
$ time GIT_USE_LOOKUP=1 git rev-list --objects --all >/dev/null
real 0m37.364s
user 0m37.045s
sys 0m0.316s
The USE_LOOKUP version might have more benefit on a cold
cache, as the time to fault in each page would dominate. But
that would be for a single lookup. In practice, most
operations tend to look up many objects, and the whole pack
.idx will end up warm.
It's possible that the code could be better optimized to
compete with a naive binary search for the warm-cache case,
and we could have the best of both worlds. But over the
years nobody has done so, and this is largely dead code that
is rarely run outside of the test suite. Let's drop it in
the name of simplicity.
This lets us remove sha1_entry_pos() entirely, as the .idx
lookup code was the only caller. Note that sha1-lookup.c
still contains sha1_pos(), which differs from
sha1_entry_pos() in two ways:
- it has a different interface; it uses a function pointer
to access sha1 entries rather than a size/offset pair
describing the table's memory layout
- it only scales the initial selection of "mi", rather
than each iteration of the search
We can't get rid of this function, as it's called from
several places. It may be that we could replace it with a
simple binary search, but that's out of scope for this patch
(and would need benchmarking).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The build procedure has been improved to allow building and testing
Git with address sanitizer more easily.
* jk/build-with-asan:
Makefile: disable unaligned loads with UBSan
Makefile: turn off -fomit-frame-pointer with sanitizers
Makefile: add helper for compiling with -fsanitize
test-lib: turn on ASan abort_on_error by default
test-lib: set ASAN_OPTIONS variable before we run git
|
|
By default, ASan will exit with code 1 when it sees an
error. This means we'll notice a problem when we expected
git to succeed, but not in a test_must_fail block.
Let's ask it to actually raise SIGABRT instead. That will
give us a signal death that test_must_fail will notice. As a
bonus, it may also leave a coredump, which can be handy for
digging into a failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We turn off ASan's leak detection by default in the test
suite because it's too noisy. But we don't do so until
part-way through test-lib. This is before we've run any
tests, but after we do our initial "./git" to see if the
binary has even been built.
When built with clang, this seems to work fine. However,
using "gcc -fsanitize=address", the leak checker seems to
complain more aggressively:
$ ./git
...
==5352==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x7f120e7afcf8 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.3+0xc1cf8)
#1 0x559fc2a3ce41 in do_xmalloc /home/peff/compile/git/wrapper.c:60
#2 0x559fc2a3cf1a in do_xmallocz /home/peff/compile/git/wrapper.c:100
#3 0x559fc2a3d0ad in xmallocz /home/peff/compile/git/wrapper.c:108
#4 0x559fc2a3d0ad in xmemdupz /home/peff/compile/git/wrapper.c:124
#5 0x559fc2a3d0ad in xstrndup /home/peff/compile/git/wrapper.c:130
#6 0x559fc274535a in main /home/peff/compile/git/common-main.c:39
#7 0x7f120dabd2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
This is a leak in the sense that we never free it, but it's
in a global that is meant to last the whole program. So it's
not really interesting or in need of fixing. And at any
rate, mentioning leaks outside of the test_expect blocks is
certainly unwelcome, as it pollutes stderr.
Let's bump the setting of ASAN_OPTIONS higher in test-lib.sh
to catch our initial "can we even run git?" test. While
we're at it, we can add a comment to make it a bit less
inscrutable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update "perl-compatible regular expression" support to enable JIT
and also allow linking with the newer PCRE v2 library.
* ab/pcre-v2:
grep: add support for PCRE v2
grep: un-break building with PCRE >= 8.32 without --enable-jit
grep: un-break building with PCRE < 8.20
grep: un-break building with PCRE < 8.32
grep: add support for the PCRE v1 JIT API
log: add -P as a synonym for --perl-regexp
grep: skip pthreads overhead when using one thread
grep: don't redundantly compile throwaway patterns under threading
|
|
The internal implementation of "git grep" has seen some clean-up.
* ab/grep-preparatory-cleanup: (31 commits)
grep: assert that threading is enabled when calling grep_{lock,unlock}
grep: given --threads with NO_PTHREADS=YesPlease, warn
pack-objects: fix buggy warning about threads
pack-objects & index-pack: add test for --threads warning
test-lib: add a PTHREADS prerequisite
grep: move is_fixed() earlier to avoid forward declaration
grep: change internal *pcre* variable & function names to be *pcre1*
grep: change the internal PCRE macro names to be PCRE1
grep: factor test for \0 in grep patterns into a function
grep: remove redundant regflags assignments
grep: catch a missing enum in switch statement
perf: add a comparison test of log --grep regex engines with -F
perf: add a comparison test of log --grep regex engines
perf: add a comparison test of grep regex engines with -F
perf: add a comparison test of grep regex engines
perf: emit progress output when unpacking & building
perf: add a GIT_PERF_MAKE_COMMAND for when *_MAKE_OPTS won't do
grep: add tests to fix blind spots with \0 patterns
grep: prepare for testing binary regexes containing rx metacharacters
grep: add a test helper function for less verbose -f \0 tests
...
|
|
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent update to t5545-push-options.sh started skipping all the
tests in the script when a web server testing is disabled or
unavailable, not just the ones that require a web server. Non HTTP
tests have been salvaged to always run in this script.
* jc/skip-test-in-the-middle:
t5545: enhance test coverage when no http server is installed
test: allow skipping the remainder
|
Eric Sunshine
Junio C Hamano
brian m. carlson
Torsten Bögershausen
Jeff King
Nguyễn Thái Ngọc Duy
SZEDER Gábor
Genki Sky
Ævar Arnfjörð Bjarmason
Charles Bailey
Ramsay Jones
Michael J Gruber
René Scharfe