| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A new feature has been added to abort early in the test framework.
* ab/test-bail:
test-lib.sh: use "Bail out!" syntax on bad SANITIZE=leak use
test-lib.sh: de-duplicate error() teardown code
|
|
Improve test framework around unwritable directories.
* ab/test-cleanly-recreate-trash-directory:
test-lib.sh: try to re-chmod & retry on failed trash removal
|
|
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
|
|
Try to re-chmod the trash directory on startup if we fail to "rm -rf"
it. This fixes problems where the test leaves the trash directory
behind in a bad permission state for whatever reason.
This fixes an interaction between [1] where t0004-unwritable.sh was
made to use "test_when_finished" for cleanup, and [2] which added the
"--immediate" mode. If a test in this file failed when running with
"--immediate" we wouldn't run the "test_when_finished" block, which
re-chmods the ".git/objects" directory (see [1]).
This can be demonstrated as e.g. (output snipped for less verbosity):
$ ./t0004-unwritable.sh --run=3 --immediate
ok 1 # skip setup (--run)
ok 2 # skip write-tree should notice unwritable repository (--run)
not ok 3 - commit should notice unwritable repository
[...]
$ ./t0004-unwritable.sh --run=3 --immediate
rm: cannot remove '[...]/trash directory.t0004-unwritable/.git/objects/info': Permission denied
FATAL: Cannot prepare test area
[...]
Instead of some version of reverting [1] let's make the test-lib.sh
resilient to this edge-case, it will happen due to [1], but also
e.g. if the relevant "test-lib.sh" process is kill -9'd during the
test run. We should try harder to recover in this case. If we fail to
remove the test directory let's retry after (re-)chmod-ing it.
This doesn't need to be guarded by something that's equivalent to
"POSIXPERM" since if we don't support "chmod" we were about to fail
anyway.
Let's also discard any error output from (a possibly nonexisting)
"chmod", we'll fail on the subsequent "rm -rf" anyway, likewise for
the first "rm -rf" invocation, we don't want to get the "cannot
remove" output if we can get around it with the "chmod", but we do
want any error output from the second "rm -rf", in case that doesn't
fix the issue.
The lack of &&-chaining between the "chmod" and "rm -rf" is
intentional, if we fail the first "rm -rf", can't chmod, but then
succeed the second time around that's what we were hoping for. We just
want to nuke the directory, not carry forward every possible error
code or error message.
1. dbda967684d (t0004 (unwritable files): simplify error handling,
2010-09-06)
2. b586744a864 (test: skip clean-up when running under --immediate
mode, 2011-06-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode added in
956d2e4639b (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23) to use a TAP "Bail out!" message when exiting. This will
cause the test run to exit immediately under a TAP consumer like
"prove(1)".
See 614fe015212 (test-lib: bail out when "-v" used under "prove",
2016-10-22) for the initial introduction of "Bail out!" to the
--verbose being amended here.
Before this compiling with "SANITIZE=" and running the tests with
"prove(1)" would cause all the tests to be run to the end (output
trimmed for fewer columns):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
rm -f -r 'test-results'
*** prove ***
t0000-basic.sh ......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
t0001-init.sh .......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
[...output where we list every single t[0-9]*.sh file as failing snipped]
Whereas now we'll fail early, like this ("->" line wrapping added):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
[...]
t0000-basic.sh ..................................... Bailout called. Further testing stopped:
-> GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
FAILED--Further testing stopped: GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except
-> when compiled with SANITIZE=leak
make: *** [Makefile:53: prove] Error 1
This change also adds a red color to the "Bailout called" line, as
we're now using "say_color error". That improves existing output in
the case of e.g.:
$ prove -j8 t[0-9]*.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
We don't need to have a "Bail out! " prefix when we're not running
under a TAP consumer (i.e. if test -n "$HARNESS_ACTIVE"), but let's
not make the output conditional on that. Showing it under e.g.:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0095-bloom.sh
Bail out! GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
Doesn't harm anything, and I don't think the (small) complexity of
only adding this if we're under "$HARNESS_ACTIVE" is worth it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
De-duplicate the "finalize_junit_xml; GIT_EXIT_OK=t; exit 1" code
shared between the "error()" and "--immediate on failure" code paths,
in preparation for adding a third user in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI learns to run the leak sanitizer builds.
* ab/sanitize-leak-ci:
tests: add a test mode for SANITIZE=leak, run it in CI
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
|
|
Code clean-up.
* ab/unused-script-helpers:
test-lib: remove unused $_x40 and $_z40 variables
git-bisect: remove unused SHA-1 $x40 shell variable
git-sh-setup: remove unused "pull with rebase" message
git-submodule: remove unused is_zero_oid() function
|
|
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce2 (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19),
7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent
936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
2. https://lore.kernel.org/git/YS9OT%2Fpn5rRK9cGB@coredump.intra.peff.net/
3. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
4. https://lore.kernel.org/git/YS9ZIDpANfsh7N+S@coredump.intra.peff.net/
5. https://lore.kernel.org/git/20210916035603.76369-1-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When SANITIZE=leak is specified we'll now add a SANITIZE_LEAK flag to
GIT-BUILD-OPTIONS, this can then be picked up by the test-lib.sh,
which sets a SANITIZE_LEAK prerequisite.
We can then skip specific tests that are known to fail under
SANITIZE=leak, add one such annotation to t0004-unwritable.sh, which
now passes under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
|
|
These two have fallen out of use with the SHA-256 migration.
The last use of $_x40 was removed in fc7e73d7ef (t4013: improve
diff-post-processor logic, 2020-08-21) and
The last use of $_z40 was removed in 7a868c51c2 (t5562: use $ZERO_OID,
2019-12-21), but it was then needlessly refactored to be hash-agnostic
in 192b517589 (t: use hash-specific lookup tables to define test
constants, 2020-02-22). We can just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This backend has been deprecated in favor of `git rebase
--rebase-merges`.
In preparation for dropping it, let's remove all the regression tests
that would need it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'test_pause' function, which is designed to help interactive
debugging and exploration of tests, currently inherits the value of HOME
and TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb. It
also invokes the shell defined by TEST_SHELL_PATH, which defaults to
/bin/sh (through SHELL_PATH).
Changing the value of HOME means that any customization configured in a
developers' shell startup files and any Git aliases defined in their
global Git configuration file are not available in the shell invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled for all commands in that shell.
Using /bin/sh as the shell invoked by 'test_pause' is not ideal since
some platforms (i.e. Debian and derivatives) use Dash as /bin/sh, and
this shell is usually compiled without readline support, which makes for
a poor interactive command line experience.
To make the interactive command line experience in the shell invoked by
'test_pause' more pleasant, save the values of HOME and TERM in
USER_HOME and USER_TERM before changing them in test-lib.sh, and add
options to 'test_pause' to optionally use these variables to invoke the
shell. Also add an option to invoke SHELL instead of TEST_SHELL_PATH, so
that developer's interactive shell is used.
We use options instead of changing the behaviour unconditionally since
these three variables can slightly change command behaviour. Moreover,
using the original HOME means commands could overwrite files in a user's
home directory. Be explicit about these caveats in the new 'Usage'
section in test-lib-functions.sh.
Finally, add '[options]' to the test_pause synopsys in t/README, and
mention that the full list of helper functions and their options can be
found in test-lib-functions.sh.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fc/disable-checkwinsize:
test: fix for COLUMNS and bash 5
|
|
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
|
|
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Testcases in t0000 are quite special given that they many of them run
nested testcases to verify that testing functionality itself works as
expected. These nested testcases are realized by writing a new ad-hoc
test script which again sources test-lib.sh, where the new script is
created in a nested subdirectory located beneath the current trash
directory. We then execute the new test script with the nested
subdirectory as current working directory and explicitly re-export
TEST_OUTPUT_DIRECTORY to point to that directory.
While this works as expected in the general case, it falls apart when
the developer has TEST_OUTPUT_DIRECTORY explicitly defined either via
the environment or via config.mak and runs "make test". In that case,
test-lib.sh will clobber the value that we've just carefully set up to
instead contain what the developer has defined. As a result, the
TEST_OUTPUT_DIRECTORY continues to point at the root output directory,
not at the nested one.
This issue causes breakage in the 'test_atexit is run' test case: the
nested test case writes files into "../../", which is assumed to be the
parent's trash directory. But because TEST_OUTPUT_DIRECTORY already
points to to the root output directory, we instead end up writing those
files outside of the output directory. The parent test case will then
try to check whether those files still exist in its own trash directory,
which thus must fail now.
Fix the issue by adding a new TEST_OUTPUT_DIRECTORY_OVERRIDE variable.
If set, then we'll always override the TEST_OUTPUT_DIRECTORY with its
value after sourcing GIT-BUILD-OPTIONS.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
|
|
Output from some of our tests were affected by the width of the
terminal that they were run in, which has been corrected by
exporting a fixed value in the COLUMNS environment.
* ab/fix-columns-to-80-during-tests:
test-lib.sh: set COLUMNS=80 for --verbose repeatability
|
|
We have a custom match_pattern_list() function which we use for matching
test names (like "t1234") against glob-like patterns (like "t1???") for
$GIT_SKIP_TESTS, --verbose-only, etc.
Those patterns may have multiple whitespace-separated elements (e.g.,
"t0* t1234 t5?78"). The callers of match_pattern_list thus pass the
strings unquoted, so that the shell does the usual field-splitting into
separate arguments.
But this also means the shell will do the usual globbing for each
argument, which can result in us seeing an expansion based on what's in
the filesystem, rather than the real pattern. For example, if I have the
path "t5000" in the filesystem, and you feed the pattern "t?000", that
_should_ match the string "t0000", but it won't after the shell has
expanded it to "t5000".
This has been a bug ever since that function was introduced. But it
didn't usually trigger since we typically use the function inside the
trash directory, which has a very limited set of files that are unlikely
to match. It became a lot easier to trigger after edc23840b0 (test-lib:
bring $remove_trash out of retirement, 2021-05-10), because now we match
$GIT_SKIP_TESTS before even entering the trash directory. So the t5000
example above can be seen with:
GIT_SKIP_TESTS=t?000 ./t0000-basic.sh
which should skip all tests but doesn't.
We can fix this by using "set -f" to ask the shell not to glob (which is
in POSIX, so should hopefully be portable enough). We only want to do
this in a subshell (to avoid polluting the rest of the script), which
means we need to get the whole string intact into the match_pattern_list
function by quoting it. Arguably this is a good idea anyway, since it
makes it much more obvious that we intend to split, and it's not simply
sloppy scripting.
Diagnosed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests will fail under --verbose because while we've unset COLUMNS
since b1d645b58ac (tests: unset COLUMNS inherited from environment,
2012-03-27), we also look for the columns with an ioctl(..,
TIOCGWINSZ, ...) on some platforms. By setting COLUMNS again we
preempt the TIOCGWINSZ lookup in pager.c's term_columns(), it'll take
COLUMNS over TIOCGWINSZ,
This fixes t0500-progress-display.sh., which broke because of a
combination of the this issue and the progress output reacting to the
column width since 545dc345ebd (progress: break too long progress bar
lines, 2019-04-12). The t5324-split-commit-graph.sh fails in a similar
manner due to progress output, see [1] for details.
The issue is not specific to progress.c, the diff code also checks
COLUMNS and some of its tests can be made to fail in a similar
manner[2], anything that invokes a pager is potentially affected.
See ea77e675e56 (Make "git help" react to window size correctly,
2005-12-18) and ad6c3739a33 (pager: find out the terminal width before
spawning the pager, 2012-02-12) for how the TIOCGWINSZ code ended up
in pager.c
1. http://lore.kernel.org/git/20210624051253.GG6312@szeder.dev
2. https://lore.kernel.org/git/20210627074419.GH6312@szeder.dev/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* ab/test-lib-updates:
test-lib: split up and deprecate test_create_repo()
test-lib: do not show advice about init.defaultBranch under --verbose
test-lib: reformat argument list in test_create_repo()
submodule tests: use symbolic-ref --short to discover branch name
test-lib functions: add --printf option to test_commit
describe tests: convert setup to use test_commit
test-lib functions: add an --annotated option to "test_commit"
test-lib-functions: document test_commit --no-tag
test-lib-functions: reword "test_commit --append" docs
test-lib tests: remove dead GIT_TEST_FRAMEWORK_SELFTEST variable
test-lib: bring $remove_trash out of retirement
|
|
REFFILES can be used to mark tests that are specific to the packed/loose ref
storage format and its limitations. Marking such tests is a preparation for
introducing the reftable storage backend.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "chainlint" feature in the test framework is a handy way to
catch common mistakes in writing new tests, but tends to get
expensive. An knob to selectively disable it has been introduced
to help running tests that the developer has not modified.
* jk/test-chainlint-softer:
t: avoid sed-based chain-linting in some expensive cases
|
|
Commit 878f988350 (t/test-lib: teach --chain-lint to detect broken
&&-chains in subshells, 2018-07-11) introduced additional chain-lint
tests which add an extra "sed" pipeline to each test we run. This has a
measurable impact on runtime. Here are timings with and without a new
environment variable (added by this patch) that lets you disable just
the additional sed-based chain-lint tests:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 make test
Time (mean ± σ): 64.202 s ± 1.030 s [User: 622.469 s, System: 301.402 s]
Range (min … max): 61.571 s … 65.662 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 make test
Time (mean ± σ): 57.591 s ± 0.333 s [User: 529.368 s, System: 270.618 s]
Range (min … max): 57.143 s … 58.309 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 make test' ran
1.11 ± 0.02 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 make test'
Of course those extra lint checks are doing something useful, so paying
a few extra seconds (at least on Linux) isn't so bad (though note the
CPU time; we're bounded in our parallel run here by the slowest test, so
it really is ~120s of CPU improvement).
But we can observe that there are some test scripts where they produce a
much stronger effect, and provide less value. In t0027 and t3070 we run
a very large number of small tests, all driven by a series of
functions/loops which are filling in the test bodies. There we get much
less bang for our buck in terms of bug-finding versus CPU cost.
This patch introduces a mechanism for controlling when those extra
lint checks are run, at two levels:
- a user can ask to disable or to force-enable the checks by setting
GIT_TEST_CHAIN_LINT_HARDER
- if the user hasn't specified a preference, individual scripts can
disable the checks by setting GIT_TEST_CHAIN_LINT_HARDER_DEFAULT;
scripts which don't set that get the current behavior of enabling
them.
In addition, this patch flips the default for t0027 and t3070's
mass-generated sections to disable the extra checks. Here are the timing
results for t0027:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh
Time (mean ± σ): 17.078 s ± 0.848 s [User: 14.878 s, System: 7.075 s]
Range (min … max): 15.952 s … 18.421 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh
Time (mean ± σ): 9.063 s ± 0.759 s [User: 7.890 s, System: 3.362 s]
Range (min … max): 7.747 s … 10.619 s 10 runs
Benchmark #3: ./t0027-auto-crlf.sh
Time (mean ± σ): 9.186 s ± 0.881 s [User: 7.957 s, System: 3.427 s]
Range (min … max): 7.796 s … 10.498 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh' ran
1.01 ± 0.13 times faster than './t0027-auto-crlf.sh'
1.88 ± 0.18 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh'
We can see that disabling the checks for the whole script buys us an
almost 2x speedup. But the new default behavior, disabling them only for
the mass-generated part, gets us most of that speedup (but still leaves
the checks on for further manual tests people might write).
As a side note, I'd caution about comparing runtimes and CPU seconds
between this timing and the earlier "make test" one. In "make test",
we're running a lot of scripts in parallel, so the CPU is throttling
down (and thus a CPU second saved here would count for more during a
parallel run; the same work takes more CPU seconds there).
We get similar results for t3070:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh
Time (mean ± σ): 20.054 s ± 3.967 s [User: 16.003 s, System: 8.286 s]
Range (min … max): 11.891 s … 23.671 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh
Time (mean ± σ): 12.399 s ± 2.256 s [User: 7.542 s, System: 5.342 s]
Range (min … max): 9.606 s … 15.727 s 10 runs
Benchmark #3: ./t3070-wildmatch.sh
Time (mean ± σ): 10.726 s ± 3.476 s [User: 6.790 s, System: 4.365 s]
Range (min … max): 5.444 s … 15.376 s 10 runs
Summary
'./t3070-wildmatch.sh' ran
1.16 ± 0.43 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh'
1.87 ± 0.71 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh'
Again, we get almost a 2x speedup disabling these. In this case, there
are no tests not covered by the script's "default to disable" behavior,
so the second two benchmarks should be the same (and while they do
differ, you can see the variance is quite high but they're within one
standard deviation).
So it seems like for these two scripts, at least, disabling the extra
checks is a reasonable tradeoff. Sadly, the overall runtime of "make
test" on my system doesn't get much faster. But that's because we're
mostly limited by the cost of the single biggest test. Here are the
top-5 tests by wall-clock time from a parallel run, before my patch:
57.9192368984222 t9001-send-email.sh
45.6329638957977 t0027-auto-crlf.sh
32.5278220176697 t3070-wildmatch.sh
22.2701289653778 t7610-mergetool.sh
20.8635759353638 t1701-racy-split-index.sh
And after:
57.1476998329163 t9001-send-email.sh
33.776211977005 t0027-auto-crlf.sh
21.3116669654846 t7610-mergetool.sh
20.7748689651489 t1701-racy-split-index.sh
19.6957249641418 t7112-reset-submodule.sh
We dropped 12s from t0027, and t3070 dropped off our list entirely at
around 16s. In both cases we're bound by t9001, but its slowness is
due to the actual tests, so we'll have to deal with it in a different
way. But this reduces overall CPU, and means that dealing with t9001 (by
improving the speed of send-email or splitting it apart) will let us
reduce our overall runtime even on multi-core machines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove various redundant or obsolete code from the test_create_repo()
function, and split up its use in test-lib.sh from what tests need
from it.
This leave us with a pass-through wrapper for "git init" in
test-lib-functions.sh, in test-lib.sh we have the same, except for
needing to redirect stdout/stderr, and emitting an error ourselves if
it fails. We don't need to error() ourselves when test_create_repo()
is invoked, as the invocation will be a part of a test's "&&"-chain.
Everything below this paragraph is a detailed summary of the history
of test_create_repo() explaining why it's safe to remove the various
things it was doing:
1. "mkdir -p" isn't needed because "git init" itself will create
leading directories if needed.
2. Since we're now a simple wrapper for "git init" we don't need to
check that we have only one argument. If someone wants to run
"test_create_repo --bare x" that's OK.
3. We won't ever hit that "Cannot setup test environment"
error.
Checking the test environment sanity when doing "git init" dates
back to eea420693be (t0000: catch trivial pilot errors.,
2005-12-10) and 2ccd2027b01 (trivial: check, if t/trash directory
was successfully created, 2006-01-05).
We can also see it in another form a bit later in my own
0d314ce834d (test-lib: use subshell instead of cd $new && .. && cd
$old, 2010-08-30).
But since 2006f0adaee (t/test-lib: make sure Git has already been
built, 2012-09-17) we already check if we have a built git
earlier.
The one thing this was testing after that 2012 change was that
we'd just built "git", but not "git-init", but since
3af4c7156c4 (tests: respect GIT_TEST_INSTALLED when initializing
repositories, 2018-11-12) we invoke "git", not "git-init".
So all of that's been checked already, and we don't need to
re-check it here.
4. We don't need to move .git/hooks out of the way.
That dates back to c09a69a83e3 (Disable hooks during tests.,
2005-10-16), since then hooks became disabled by default in
f98f8cbac01 (Ship sample hooks with .sample suffix, 2008-06-24).
So the hooks were already disabled by default, but as can be seen
from "mkdir .git/hooks" changes various tests needed to re-setup
that directory. Now they no longer do.
This makes us implicitly depend on the default hooks being
disabled, which is a good thing. If and when we'd have any
on-by-default hooks (I see no reason we ever would) we'd want to
see the subtle and not so subtle ways that would break the test
suite.
5. We don't need to "cd" to the "$repo" directory at all anymore.
In the code being removed here we both "cd"'d to the repository
before calling "init", and did so in a subshell.
It's not important to do either, so both of those can be
removed. We cd'd because this code grew from test-lib.sh code
where we'd have done so already, see eedf8f97e58 (Abstract
test_create_repo out for use in tests., 2006-02-17), and later
"cd"'d inside a subshell since 0d314ce834d to avoid having to keep
track of an "old pwd" variable to cd back after the setup.
Being in the repository directory made moving the hooks around
easier (we wouldn't have to fully qualify the path). Since we're
not moving the hooks per #4 above we don't need to "cd" for that
reason either.
6. We can drop the --template argument and instead rely on the
GIT_TEMPLATE_DIR set to the same path earlier in test-lib.sh. See
8683a45d669 (Introduce GIT_TEMPLATE_DIR, 2006-12-19)
7. We only needed that ">&3 2>&4" redirection when invoked from
test-lib.sh.
We could still invoke test_create_repo() there, but as the
invocation is now trivial and we don't have a good reason to use
test_create_repo() elsewhere let's call "git init" there
ourselves.
8. We didn't need to resolve "git" as
"${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" in test_create_repo(),
even for the use of test-lib.sh
PATH is already set up in test-lib.sh to start with
GIT_TEST_INSTALLED and/or GIT_EXEC_PATH before
test_create_repo() (now "git init") is called.. So we can simply
run "git" and rely on the PATH lookup choosing the right
executable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arrange for the advice about naming the initial branch not to be shown
in the --verbose output of the test suite.
Since 675704c74dd (init: provide useful advice about
init.defaultBranch, 2020-12-11) some tests have been very chatty with
repeated occurrences of this multi-line advice. Having it be this
verbose isn't helpful for anyone in the context of git's own test
suite, and it makes debugging tests that use their own "git init"
invocations needlessly distracting.
By setting the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME variable early in
test-lib.sh itself we'll squash the warning not only for
test_create_repo(), as 675704c74dd explicitly intended, but also for
other "git init" invocations.
And once we'd like to have this configuration set for all "git init"
invocations in the test suite we can get rid of the init.defaultBranch
configuration setting in test_create_repo(), as
repo_default_branch_name() in refs.c will take the GIT_TEST_* variable
over it being set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no point in creating a repository or directory only to decide
right afterwards that we're skipping all the tests. We can save
ourselves the redundant "git init" or "mkdir" and "rm -rf" in this
case.
We carry around the "$remove_trash" variable because if the directory
is unexpectedly gone at test_done time we'll still want to hit the
"trash directory already removed" error, but not if we never created
the trash directory. See df4c0d1a792 (test-lib: abort when can't
remove trash directory, 2017-04-20) for the addition of that error.
So let's partially revert 06478dab4c (test-lib: retire $remove_trash
variable, 2017-04-23) and move the decision about whether to skip all
tests earlier.
Let's also fix a bug that was with us since abc5d372ec (Enable
parallel tests, 2008-08-08): we would leak $remove_trash from the
environment. We don't want this to error out, so let's reset it to the
empty string first:
remove_trash=t GIT_SKIP_TESTS=t0001 ./t0001-init.sh
I tested this with --debug, see 4d0912a206 (test-lib.sh: do not barf
under --debug at the end of the test, 2017-04-24) for a bug we don't
want to re-introduce.
While I'm at it, let's move the HOME assignment to just before
test_create_repo, it could be lower, but it seems better to set it
before calling anything in test-lib-functions.sh
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cygwin pathname handling fix.
* ad/cygwin-no-backslashes-in-paths:
cygwin: disallow backslashes in file names
|
|
The backslash character is not a valid part of a file name on Windows.
If, in Windows, Git attempts to write a file that has a backslash
character in the filename, it will be incorrectly interpreted as a
directory separator.
This caused CVE-2019-1354 in MinGW, as this behaviour can be manipulated
to cause the checkout to write to files it ought not write to, such as
adding code to the .git/hooks directory. This was fixed by e1d911dd4c
(mingw: disallow backslash characters in tree objects' file names,
2019-09-12). However, the vulnerability also exists in Cygwin: while
Cygwin mostly provides a POSIX-like path system, it will still interpret
a backslash as a directory separator.
To avoid this vulnerability, CVE-2021-29468, extend the previous fix to
also apply to Cygwin.
Similarly, extend the test case added by the previous version of the
commit. The test suite doesn't have an easy way to say "run this test
if in MinGW or Cygwin", so add a new test prerequisite that covers both.
As well as checking behaviour in the presence of paths containing
backslashes, the existing test also checks behaviour in the presence of
paths that differ only by the presence of a trailing ".". MinGW follows
normal Windows application behaviour and treats them as the same path,
but Cygwin more closely emulates *nix systems (at the expense of
compatibility with native Windows applications) and will create and
distinguish between such paths. Gate the relevant bit of that test
accordingly.
Reported-by: RyotaK <security@ryotak.me>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
|
|
In preparation for switching from merge-recursive to merge-ort as the
default strategy, have the testsuite default to running with merge-ort.
Keep coverage of the recursive backend by having the linux-gcc job run
with it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
|
|
Test framework clean-up.
* ab/test-lib:
test-lib-functions: assert correct parameter count
test-lib-functions: remove bug-inducing "diagnostics" helper param
test libs: rename "diff-lib" to "lib-diff"
t/.gitattributes: sort lines
test-lib-functions: move function to lib-bitmap.sh
test libs: rename gitweb-lib.sh to lib-gitweb.sh
test libs: rename bundle helper to "lib-bundle.sh"
test-lib-functions: remove generate_zero_bytes() wrapper
test-lib-functions: move test_set_index_version() to its user
test lib: change "error" to "BUG" as appropriate
test-lib: remove check_var_migration
|
|
Remove the last uses of the C_LOCALE_OUTPUT prerequisite as well as
the prerequisite itself. This is a follow-up to d162b25f956 (tests:
remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20), as well as
the preceding commit where we removed the simpler uses of
C_LOCALE_OUTPUT.
Here I'm slightly refactoring a test added in 21e5ad50fc5 (safecrlf:
Add mechanism to warn about irreversible crlf conversions,
2008-02-06), as well as getting rid of another "test_have_prereq
C_LOCALE_OUTPUT" use.
I'm not leaving the prerequisite itself in place for in-flight changes
as there currently are none that introduce new tests that rely on it,
and because C_LOCALE_OUTPUT is currently a noop on the master branch
we likely won't have any new submissions that use it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
|
|
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
|
|
Remove the check_var_migration() migration helper. This was added back
in [1], [2] and [3] to warn users to migrate from e.g. the
"GIT_FSMONITOR_TEST" name to "GIT_TEST_FSMONITOR".
I daresay that having been warning about this since late 2018 (or
v2.20.0) was sufficient time to give everyone interested a heads-up
about moving to the new names.
I don't see the need for going through the "do this later" codepath
anticipated in [1], let's just remove this instead.
1. 4cb54d0aa8e (fsmonitor: update GIT_TEST_FSMONITOR support,
2018-09-18)
2. 1f357b045b5 (read-cache: update TEST_GIT_INDEX_VERSION support,
2018-09-18)
3. 5765d97b71d (preload-index: update GIT_FORCE_PRELOAD_TEST support,
2018-09-18)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'./t1234-foo.sh --stress-jobs=X ...' is supposed to run that test
script in X parallel jobs, but the number of jobs specified on the
command line is entirely ignored if other '--stress'-related options
follow. I.e. both './t1234-foo.sh --stress-jobs=X --stress-limit=Y'
and './t1234-foo.sh --stress-jobs=X --stress' fall back to using twice
the number of CPUs parallel jobs instead.
The former has been broken since commit de69e6f6c9 (tests: let
--stress-limit=<N> imply --stress, 2019-03-03) [1], which started to
unconditionally overwrite the $stress variable holding the specified
number of jobs in its effort to imply '--stress'. The latter has been
broken since f545737144 (tests: introduce --stress-jobs=<N>,
2019-03-03), because it didn't consider that handling '--stress' will
overwrite that variable as well.
We could fix this by being more careful about (over)writing that
$stress variable and checking first whether it has already been set.
But I think it's cleaner to use a dedicated variable to hold the
number of specified parallel jobs, so let's do that instead.
[1] In de69e6f6c9 there was no '--stress-jobs=X' option yet, the
number of parallel jobs had to be specified via '--stress=X', so,
strictly speaking, de69e6f6c9 broke './t1234-foo.sh --stress=X
--stress-limit=Y'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This removes the ability to inject "poison" gettext() messages via the
GIT_TEST_GETTEXT_POISON special test setup.
I initially added this as a compile-time option in bb946bba761 (i18n:
add GETTEXT_POISON to simulate unfriendly translator, 2011-02-22), and
most recently modified to be toggleable at runtime in
6cdccfce1e0 (i18n: make GETTEXT_POISON a runtime option, 2018-11-08)..
The reason for its removal is that the trade-off of maintaining it
v.s. what it's getting us has long since flipped. When gettext was
integrated in 5e9637c6297 (i18n: add infrastructure for translating
Git with gettext, 2011-11-18) there was understandable concern on the
Git ML that in marking messages for translation en-masse we'd
inadvertently mark plumbing messages. The GETTEXT_POISON facility was
a way to smoke those out via our test suite.
Nowadays however we're done (or almost entirely done) with any marking
of messages for translation. New messages are usually marked by their
authors, who'll know whether it makes sense to translate them or
not. If not any errors in marking the messages are much more likely to
be spotted in review than in the the initial deluge of i18n patches in
the 2011-2012 era.
So let's just remove this. This leaves the test suite in a state where
we still have a lot of test_i18n, C_LOCALE_OUTPUT
etc. uses. Subsequent commits will remove those too.
The change to t/lib-rebase.sh is a selective revert of the relevant
part of f2d17068fd (i18n: rebase-interactive: mark comments of squash
for translation, 2016-06-17), and the comment in
t/t3406-rebase-message.sh is from c7108bf9ed (i18n: rebase: mark
messages for translation, 2012-07-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
|
|
We no longer use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing schedule mechanism using 'cron' is supported by POSIX
platforms, but not Windows. It also works slightly differently on
macOS to significant detriment of the user experience. To allow for
new implementations on these platforms, extract a method that
performs the platform-specific scheduling mechanism. This will be
swapped at compile time with new implementations on specialized
platforms.
As we add this generality, rename GIT_TEST_CRONTAB to
GIT_TEST_MAINT_SCHEDULER. Further, this variable is now parsed as
"<scheduler>:<command>" so we can test platform-specific scheduling
logic even when not on the correct platform. By specifying the
<scheduler> in this string, we will be able to test all three sets of
Git logic from a Linux machine.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
Dev support.
* jk/perl-warning:
perl: check for perl warnings while running tests
|
|
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Johannes Schindelin
Philippe Blain
SZEDER Gábor
Felipe Contreras
Thomas Bétous
Patrick Steinhardt
Jeff King
Han-Wen Nienhuys
Adam Dinwoodie
Elijah Newren
Derrick Stolee