| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Exit trap should not be removed in case tests require cleanup code. This
is especially important if tests are executed with the --immediate option.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, unknown options would be ignored, including any subsequent
valid options.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, test_create_repo() expects that templates can be found below
`pwd`/.. This assumption fails when tests are run against a git
installed somewhere else or test_create_repo() is called from
subdirectiories (several tests do this).
Therefore, use $TEST_DIRECTORY as introduced in 2d84e9fb and expect
templates to be present in $TEST_DIRECTORY/.. which should be the root
dir of the git checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
test-lib: Clean up comments and Makefile.
diff --no-index: Do not generate patch output if other output is requested
|
|
* maint-1.6.1:
test-lib: Clean up comments and Makefile.
diff --no-index: Do not generate patch output if other output is requested
|
|
Bring documentation in test-lib and clean target
in Makefile in-line with abc5d372.
Signed-off-by: Emil Sit <sit@emilsit.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'for-junio' of git://repo.or.cz/git/mingw/j6t:
t7502-commit: Skip SIGTERM test on Windows
t7005-editor: Use $SHELL_PATH in the editor scripts
|
|
The implementation of exec on Windows is just a rough approximation of the
POSIX behavior. In particular, no real process "overlay" happens (a new
process is spawned instead and the parent process waits until the child
terminates). In particular, the process ID cannot be taken by the exec'd
process. But there is one test in t7502-commit.sh that depends on this.
We have to skip it on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
* js/windows-tests:
t0060: fix whitespace in "wc -c" invocation
t5503: GIT_DEBUG_SEND_PACK is not supported on MinGW
t7004: Use prerequisite tags to skip tests that need gpg
Use prerequisites to skip tests that need unzip
t3700: Skip a test with backslashes in pathspec
Skip tests that require a filesystem that obeys POSIX permissions
t0060: Fix tests on Windows
Use prerequisite tags to skip tests that depend on symbolic links
t9100, t9129: Use prerequisite tags for UTF-8 tests
t5302: Use prerequisite tags to skip 64-bit offset tests
Skip tests that fail if the executable bit is not handled by the filesystem
t3600: Use test prerequisite tags
test-lib: Infrastructure to test and check for prerequisites
t0050: Check whether git init detected symbolic link support correctly
Tests on Windows: $(pwd) must return Windows-style paths
test-lib: Work around missing sum on Windows
test-lib: Work around incompatible sort and find on Windows
Conflicts:
t/t3000-ls-files-others.sh
|
|
The test verifies that glob special characters can be escaped with
backslashes. In particular, the string fo\[ou\]bar is given to git.
On Windows, this does not work because backslashes are first of all
directory separators, and first thing git does with a pathspec from the
command line is to convert backslashes to forward slashes.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Many tests depend on that symbolic links work. This introduces a check
that sets the prerequisite tag SYMLINKS if the file system supports
symbolic links. Since so many tests have to check for this prerequisite,
we do the check in test-lib.sh, so that we don't need to repeat the test
in many scripts.
To check for 'ln -s' failures, you can use a FAT partition on Linux:
$ mkdosfs -C git-on-fat 1000000
$ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt
Clone git to /mnt and
$ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7
t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \
make test
(These additionally skipped tests depend on POSIX permissions that FAT on
Linux does not provide.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
* mg/test-installed:
test-lib.sh: Allow running the test suite against installed git
test-lib.sh: Test for presence of git-init in the right path.
|
|
Some tests can be run only if a particular prerequisite is available. For
example, some tests require that an UTF-8 locale is available. Here we
introduce functions that are used in this way:
1. Insert code that checks whether the prerequisite is available. If it is,
call test_set_prereq with an arbitrary tag name that subsequently can be
used to check for the prerequisite:
case $LANG in
*.utf-8)
test_set_prereq UTF8
;;
esac
2. In the calls to test_expect_success pass the tag name:
test_expect_success UTF8 '...description...' '...tests...'
3. There is an auxiliary predicate that can be used anywhere to test for
a prerequisite explicitly:
if test_have_prereq UTF8
then
...code to be skipped if prerequisite is not available...
fi
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Many tests pass $(pwd) in some form to git and later test that the output
of git contains the correct value of $(pwd). For example, the test of
'git remote show' sets up a remote that contains $(pwd) and then the
expected result must contain $(pwd).
Again, MSYS-bash's path mangling kicks in: Plain $(pwd) uses the MSYS style
absolute path /c/path/to/git. The test case would write this name into
the 'expect' file. But when git is invoked, MSYS-bash converts this name to
the Windows style path c:/path/to/git, and git would produce this form in
the result; the test would fail.
We fix this by passing -W to bash's pwd that produces the Windows-style
path.
There are a two cases that need an accompanying change:
- In t1504 the value of $(pwd) becomes part of a path list. In this case,
the lone 'c' in something like /foo:c:/path/to/git:/bar inhibits
MSYS-bashes path mangling; IOW in this case we want the /c/path/to/git
form to allow path mangling. We use $PWD instead of $(pwd), which always
has the latter form.
- In t6200, $(pwd) - the Windows style path - must be used to construct the
expected result because that is the path form that git sees. (The change
in the test itself is just for consistency: 'git fetch' always sees the
Windows-style path, with or without the change.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
t1002-read-tree-m-u-2way.sh uses 'sum', but it does not rely on the exact
form of the sum, only that it is a hash digest. Therefore, we can sneak
in 'md5sum' under the name 'sum'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
If the PATH lists the Windows system directories before the MSYS
directories, Windows's own incompatible sort and find commands would be
picked up. We implement these commands as functions and call the real
tools by absolute path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Since the test case counter was incremented very late, there were a few
users of the counter had to do their own incrementing. Now we increment it
early and simplify these users.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
In particular:
- Test case counting can be achieved by arithmetic expansion.
- The name of the test, e.g. t1234, can be computed with ${0%%} and ${0##}.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Introduce variables GIT_TEST_INSTALLED and GIT_TEST_EXEC_PATH such that
the test suite can be run against a git which is installed at
GIT_TEST_INSTALLED with subcommands at GIT_TEST_EXEC_PATH.
GIT_TEST_INSTALLED defaults to the git.git checkout, GIT_TEST_EXEC_PATH
defaults to the output of '$GIT_TEST_INSTALLED/git --exec-path'.
Run the suite e.g. as
GIT_TEST_INSTALLED=/some/path make test
but note that this requires and uses parts of a compiled git in the
git.git checkout: test helpers, templates and perl libraries are taken
from there.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It just happens so that when GIT_EXEC_PATH points to a compiled checkout
of git.git it contains "git". Since this is not true in general make
test-lib check for "git-init" which is always in GIT_EXEC_PATH.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier code meant to attempt to strip everything except the test
number, but only stripped the part starting with the last dash.
However, there is no reason why we should not use the whole basename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
|
|
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
|
|
Some shells do not like "export var=val"; the right way to write
it is to do an assignment and then export just the variable name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch makes --valgrind try to override _all_ Git binaries in the
PATH, and it makes it an error to call *.sh and *.perl scripts directly.
While it is not strictly necessary to look through the whole PATH to
find git binaries to override, it is in line with running an expensive
test (which valgrind is) to make extra sure that only binaries are
tested that actually come from the git.git checkout.
In the same spirit, we can test that neither our test suite nor our
scripts try to run the *.sh or *.perl scripts directly.
It's more like a "because we can" than a "this is tightly connected
to valgrind", but in the author's opinion "because we can" is "so we
should" in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Brian Gernhardt noticed that t3411 was broken recently on case insensitive
filesystems.
0088496 (test-lib.sh: introduce test_commit() and test_merge() helpers,
2009-01-27) used a tag and a file with the same name, only different in
case, and converted many existing tests that needed only a file (or a
tag).
Some tests may want to refer to a rev or a file, but on a filesystem that
loses cases, referring to either without disambiguation mark ("--") on the
command line now triggers an error (t3411 was the only one such test).
Fix it by using a filename that is different from the tagname each step
creates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In dc871831(Only use GIT_CONFIG in "git config", not other programs),
GIT_CONFIG_LOCAL was rested in peace, in favor of not reading
/etc/gitconfig and $HOME/.gitconfig at all when GIT_CONFIG is set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
test-lib: fix broken printf
git apply --directory broken for new files
|
|
b8eecafd888d219633f4c29e8b6a90fc21a46dfd introduced usage of
printf without a format string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
rebase -i: do not fail when there is no commit to cherry-pick
test-lib: fix color reset in say_color()
fix pread()'s short read in index-pack
Conflicts:
csum-file.c
|
|
When executing a single test with colors enabled, the cursor was not set
back to the previous one, and you had to hit an extra enter to get it
back.
Work around this problem by calling 'tput sgr0' before printing the
final newline.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Sometimes you want to keep the trash directory, even if all tests
passed. For example, when extending tests, it comes it quite handy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/test-deeper:
tests: use $TEST_DIRECTORY to refer to the t/ directory
|
|
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On multiprocessor machines, or with I/O heavy tests (that leave the
CPU waiting a lot), it makes sense to parallelize the tests.
However, care has to be taken that the different jobs use different
trash directories.
This commit does so, by creating the trash directories with a suffix
that is unique with regard to the test, as it is the test's base name.
Further, the trash directory is removed in the test itself if
everything went fine, so that the trash directories do not
pile up only to be removed at the very end.
If a test failed, the trash directory is not removed. Chances are
that the exact error message is lost in the clutter, but you can still
see what test failed from the name of the trash directory, and repeat
the test (without -j).
If all was good, you will see the aggregated results.
Suggestions to simplify this commit came from Junio and René.
There still is an issue with tests that want to run a server process and
listen to a fixed port (http and svn) --- they cannot run in parallel but
this patch does not address this issue.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test_must_fail function in test-lib.sh has been designed to
distinguish segmentation faults from controlled errors. But in the
current implementation this only works if a git command does not return a
small negative value, like -1, -2 or -3. But some git commands do.
Because any signal (like SIGSEGV) will result in an exit status
less than 193, this patch just adds a further check for the exit
status.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
|
|
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sr/tests:
Hook up the result aggregation in the test makefile.
A simple script to parse the results from the testcases
Modify test-lib.sh to output stats to t/test-results/*
Conflicts:
t/test-lib.sh
|
|
* lw/perlish:
Git.pm: add test suite
t/test-lib.sh: add test_external and test_external_without_stderr
|
|
This is for running external test scripts in other programming
languages that provide continuous output about their tests. Using
test_expect_success (like "test_expect_success 'description' 'perl
test-script.pl'") doesn't suffice here because test_expect_success
eats stdout in non-verbose mode, which is not fixable without major
file descriptor trickery.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Clemens Buchacher
Michael J Gruber
Jeff King
Junio C Hamano
Emil Sit
Johannes Sixt
Johannes Schindelin
Markus Heidelberg
Shawn O. Pearce
Miklos Vajna
Stephan Beyer
Lea Wiemann