summaryrefslogtreecommitdiff
path: root/t/test-lib-functions.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-05-26Merge branch 'jc/test-seq' into maintLibravatar Junio C Hamano1-15/+13
Test fix. * jc/test-seq: test-lib-functions.sh: rewrite test_seq without Perl test-lib-functions.sh: remove misleading comment on test_seq
2016-05-09test-lib-functions.sh: rewrite test_seq without PerlLibravatar Junio C Hamano1-1/+6
Rewrite the 'seq' imitation using only commands and features that are typically found built into modern POSIX shells, instead of relying on Perl to run a single-liner script. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-09test-lib-functions.sh: remove misleading comment on test_seqLibravatar Junio C Hamano1-14/+7
We never used the "letters" form since we came up with "test_seq" to replace use of non-portable "seq" in our test script, which we introduced it at d17cf5f3 (tests: Introduce test_seq, 2012-08-04). We use this helper to either iterate for N times (i.e. the values on the lines do not even matter), or just to get N distinct strings (i.e. the values on the lines themselves do not really matter, but we care that they are different from each other and reproducible). Stop promising that we may allow using "letters"; this would open an easier reimplementation that does not rely on $PERL, if somebody later wants to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-25test_must_fail: report number of unexpected signalLibravatar Jeff King1-1/+1
If a command is marked as test_must_fail but dies with a signal, we consider that a problem and report the error to stderr. However, we don't say _which_ signal; knowing that can make debugging easier. Let's share as much as we know. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-28add "ok=sigpipe" to test_must_fail and use it to fix flaky testsLibravatar Lars Schneider1-0/+3
t5516 "75 - deny fetch unreachable SHA1, allowtipsha1inwant=true" is flaky in the following case: 1. remote upload-pack finds out "not our ref" 2. remote sends a response and closes the pipe 3. fetch-pack still tries to write commands to the remote upload-pack 4. write call in wrapper.c dies with SIGPIPE The test is flaky because the sending fetch-pack may or may not have finished writing its output by step (3). If it did, then we see a closed pipe on the next read() call. If it didn't, then we get the SIGPIPE from step (4) above. Both are fine, but the latter fools test_must_fail. t5504 "9 - push with transfer.fsckobjects" is flaky, too, and returns SIGPIPE once in a while. I had to remove the final "To dst..." output check because there is no output if the process dies with SIGPIPE. Accept such a death-with-sigpipe also as OK when we are expecting a failure. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Jeff King <peff@peff.net>
2015-11-28implement test_might_fail using a refactored test_must_failLibravatar Lars Schneider1-14/+33
Add an (optional) first parameter "ok=<special case>" to test_must_fail and return success for "<special case>". Add "success" as "<special case>" and use it to implement "test_might_fail". This removes redundancies in test-lib-function.sh. You can pass multiple <special case> arguments divided by comma (e.g. "test_must_fail ok=success,something") Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Jeff King <peff@peff.net>
2015-10-30test: facilitate debugging Git executables in tests with gdbLibravatar Johannes Schindelin1-0/+8
When prefixing a Git call in the test suite with 'debug ', it will now be run with GDB, allowing the developer to debug test failures more conveniently. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-08test-lib-functions: detect test_when_finished in subshellLibravatar John Keeping1-0/+5
test_when_finished does nothing in a subshell because the change to test_cleanup does not affect the parent. There is no POSIX way to detect that we are in a subshell ($$ and $PPID are specified to remain unchanged), but we can detect it on Bash and fall back to ignoring the bug on other shells. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-08test-lib-functions: support "test_config -C <dir> ..."Libravatar John Keeping1-3/+17
If used in a subshell, test_config cannot unset variables at the end of a test. This is a problem when testing submodules because we do not want to "cd" at to top level of a test script in order to run the command inside the submodule. Add a "-C" option to test_config (and test_unconfig) so that test_config can be kept outside subshells and still affect subrepositories. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-19Merge branch 'jc/test-prereq-validate'Libravatar Junio C Hamano1-0/+9
Help us to find broken test script that splits the body part of the test by mistaken use of wrong kind of quotes. * jc/test-prereq-validate: test: validate prerequistes syntax
2015-05-13Merge branch 'ep/fix-test-lib-functions-report' into maintLibravatar Junio C Hamano1-2/+2
* ep/fix-test-lib-functions-report: test-lib-functions.sh: fix the second argument to some helper functions
2015-05-05Merge branch 'ep/fix-test-lib-functions-report'Libravatar Junio C Hamano1-2/+2
* ep/fix-test-lib-functions-report: test-lib-functions.sh: fix the second argument to some helper functions
2015-04-28test: validate prerequistes syntaxLibravatar Junio C Hamano1-0/+9
Brian Carson noticed that a test piece in t5601 had a pair of single quotes in the body, which made it into 4 parameter call to test_expect_success, as if its test title were a prerequisite. As the prerequisites have a specific syntax (i.e. comma separated tokens spelled in capital letters, possibly prefixed with ! for negation), validate them to catch such a mistake in the future. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-04-16test-lib-functions.sh: fix the second argument to some helper functionsLibravatar Elia Pinto1-2/+2
The second argument to test_path_is_file and test_path_is_dir must be $2 and not $*, which instead would repeat the file name in the error message. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-13Merge branch 'jc/diff-test-updates' into maintLibravatar Junio C Hamano1-1/+3
Test clean-up. * jc/diff-test-updates: test_ln_s_add: refresh stat info of fake symbolic links t4008: modernise style t/diff-lib: check exact object names in compare_diff_raw tests: do not borrow from COPYING and README from the real source t4010: correct expected object names t9300: correct expected object names t4008: correct stale comments
2015-03-05Merge branch 'jc/diff-test-updates'Libravatar Junio C Hamano1-1/+3
Test clean-up. * jc/diff-test-updates: test_ln_s_add: refresh stat info of fake symbolic links t4008: modernise style t/diff-lib: check exact object names in compare_diff_raw tests: do not borrow from COPYING and README from the real source t4010: correct expected object names t9300: correct expected object names t4008: correct stale comments
2015-02-23test_ln_s_add: refresh stat info of fake symbolic linksLibravatar Johannes Sixt1-1/+3
We have a helper function test_ln_s_add that inserts a symbolic link into the index even if the file system does not support symbolic links. There is a small flaw in the emulation path: the added entry does not pick up stat information of the fake symbolic link from the file system, as a consequence, the index is not exactly the same as for the "regular" path (where symbolic links are available). To fix this, just call git update-index again. This flaw was revealed by the earlier change that tightened compare_diff_raw(), because a test case in t4008 depends on the correctly updated index. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-21Merge branch 'da/mergetool-tests'Libravatar Junio C Hamano1-12/+18
The clean-up of this test script was long overdue and is a very welcome change. * da/mergetool-tests: test-lib-functions: adjust style to match CodingGuidelines t7610-mergetool: use test_config to isolate tests t7610-mergetool: add missing && and remove commented-out code t7610-mergetool: use tabs instead of a mix of tabs and spaces
2014-10-16test-lib-functions: adjust style to match CodingGuidelinesLibravatar David Aguilar1-12/+18
Prefer "test" over "[ ]" for conditionals. Prefer "$()" over backticks for command substitutions. Avoid control structures on a single line with semicolons. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-13t5304: use helper to report failure of "test foo = bar"Libravatar Jeff King1-0/+9
For small outputs, we sometimes use: test "$(some_cmd)" = "something we expect" instead of a full test_cmp. The downside of this is that when it fails, there is no output at all from the script. Let's introduce a small helper to make tests easier to debug. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-21Merge branch 'jl/submodule-tests'Libravatar Junio C Hamano1-0/+11
* jl/submodule-tests: revert: add t3513 for submodule updates stash: add t3906 for submodule updates am: add t4255 for submodule updates cherry-pick: add t3512 for submodule updates pull: add t5572 for submodule updates rebase: add t3426 for submodule updates merge: add t7613 for submodule updates bisect: add t6041 for submodule updates reset: add t7112 for submodule updates read-tree: add t1013 for submodule updates apply: add t4137 for submodule updates checkout: call the new submodule update test framework submodules: add the lib-submodule-update.sh test library test-lib: add test_dir_is_empty()
2014-06-25Merge branch 'ep/avoid-test-a-o'Libravatar Junio C Hamano1-2/+2
Update tests and scripts to avoid "test ... -a ...", which is often more error-prone than "test ... && test ...". Squashed misconversion fix-up into git-submodule.sh updates. * ep/avoid-test-a-o: git-submodule.sh: avoid "echo" path-like values git-submodule.sh: avoid "test <cond> -a/-o <cond>" t/test-lib-functions.sh: avoid "test <cond> -a/-o <cond>" t/t9814-git-p4-rename.sh: avoid "test <cond> -a/-o <cond>" t/t5538-push-shallow.sh: avoid "test <cond> -a/-o <cond>" t/t5403-post-checkout-hook.sh: avoid "test <cond> -a/-o <cond>" t/t5000-tar-tree.sh: avoid "test <cond> -a/-o <cond>" t/t4102-apply-rename.sh: avoid "test <cond> -a/-o <cond>" t/t0026-eol-config.sh: avoid "test <cond> -a/-o <cond>" t/t0025-crlf-auto.sh: avoid "test <cond> -a/-o <cond>" t/lib-httpd.sh: avoid "test <cond> -a/-o <cond>" git-rebase--interactive.sh: avoid "test <cond> -a/-o <cond>" git-mergetool.sh: avoid "test <cond> -a/-o <cond>" git-bisect.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-resolve.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-repack.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-merge.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-commit.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-clone.sh: avoid "test <cond> -a/-o <cond>" check_bindir: avoid "test <cond> -a/-o <cond>"
2014-06-20test-lib: add test_dir_is_empty()Libravatar Jens Lehmann1-0/+11
For the upcoming submodule test framework we often need to assert that an empty directory exists in the work tree. Add the test_dir_is_empty() function which asserts that the given argument is an empty directory. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-16Merge branch 'sk/test-cmp-bin'Libravatar Junio C Hamano1-0/+6
* sk/test-cmp-bin: t5000, t5003: do not use test_cmp to compare binary files
2014-06-16Merge branch 'mt/patch-id-stable' (early part)Libravatar Junio C Hamano1-0/+5
* 'mt/patch-id-stable' (early part): patch-id-test: test stable and unstable behaviour patch-id: make it stable against hunk reordering test doc: test_write_lines does not split its arguments test: add test_write_lines helper
2014-06-10test: add test_write_lines helperLibravatar Michael S. Tsirkin1-0/+5
API and implementation as suggested by Junio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-09t/test-lib-functions.sh: avoid "test <cond> -a/-o <cond>"Libravatar Elia Pinto1-2/+2
The construct is error-prone; "test" being built-in in most modern shells, the reason to avoid "test <cond> && test <cond>" spawning one extra process by using a single "test <cond> -a <cond>" no longer exists. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-04t5000, t5003: do not use test_cmp to compare binary filesLibravatar Stepan Kasal1-0/+6
test_cmp() is primarily meant to compare text files (and display the difference for debug purposes). Raw "cmp" is better suited to compare binary files (tar, zip, etc.). On MinGW, test_cmp is a shell function mingw_test_cmp that tries to read both files into environment, stripping CR characters (introduced in commit 4d715ac0). This function usually speeds things up, as fork is extremly slow on Windows. But no wonder that this function is extremely slow and sometimes even crashes when comparing large tar or zip files. Signed-off-by: Stepan Kasal <kasal@ucw.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-14Merge branch 'tg/index-v4-format'Libravatar Junio C Hamano1-0/+5
* tg/index-v4-format: read-cache: add index.version config variable test-lib: allow setting the index format version introduce GIT_INDEX_VERSION environment variable
2014-02-24test-lib: allow setting the index format versionLibravatar Thomas Gummerer1-0/+5
Allow adding a TEST_GIT_INDEX_VERSION variable to config.mak to set the index version with which the test suite should be run. If it isn't set, the default version given in the source code is used (currently version 3). To avoid breakages with index versions other than [23], also set the index version under which t2104 is run to 3. This test only tests functionality specific to version 2 and 3 of the index file and would fail if the test suite is run with any other version. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-14tests: turn on network daemon tests by defaultLibravatar Jeff King1-0/+58
We do not run the httpd nor git-daemon tests by default, as they are rather heavyweight and require network access (albeit over localhost). However, it would be nice if more pepole ran them, for two reasons: 1. We would get more test coverage on more systems. 2. The point of the test suite is to find regressions. It is very easy to change some of the underlying code and break the httpd code without realizing you are even affecting it. Running the httpd tests helps find these problems sooner (ideally before the patches even hit the list). We still want to leave an "out", though, for people who really do not want to run them. For that reason, the GIT_TEST_HTTPD and GIT_TEST_GIT_DAEMON variables are now tri-state booleans (true/false/auto), so you can say GIT_TEST_HTTPD=false to turn the tests back off. To support those who want a stable single way to disable these tests across versions of Git before and after this change, an empty string explicitly set to these variables is also taken as "false", so the behaviour changes only for those who: a. did not express any preference by leaving these variables unset. They did not test these features before, but now they do; or b. did express that they want to test these features by setting GIT_TEST_FEATURE=false (or any equivalent other ways to tell "false" to Git, e.g. "0"), which has been a valid but funny way to say that they do want to test the feature only because we used to interpret any non-empty string to mean "yes please test". They no longer test that feature. In addition, we are forgiving of common setup failures (e.g., you do not have apache installed, or have an old version) when the tri-state is "auto" (or unset), but report an error when it is "true". This makes "auto" a sane default, as we should not cause failures on setups where the tests cannot run. But it allows people who use "true" to catch regressions in their system (e.g., they uninstalled apache, but were expecting their automated test runs to test git-httpd, and would want to be notified). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-26test: replace shebangs with descriptions in shell librariesLibravatar Jonathan Nieder1-1/+2
A #! line in these files is misleading, since these scriptlets are meant to be sourced with '.' (using whatever shell sources them) instead of run directly using the interpreter named on the #! line. Removing the #! line shouldn't hurt syntax highlighting since these files have filenames ending with '.sh'. For documentation, add a brief description of how the files are meant to be used in place of the shebang line. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-04Merge branch 'jk/wrap-perl-used-in-tests'Libravatar Junio C Hamano1-3/+7
* jk/wrap-perl-used-in-tests: t: use perl instead of "$PERL_PATH" where applicable t: provide a perl() function which uses $PERL_PATH
2013-10-29t: use perl instead of "$PERL_PATH" where applicableLibravatar Jeff King1-3/+3
As of the last commit, we can use "perl" instead of "$PERL_PATH" when running tests, as the former is now a function which uses the latter. As the shorter "perl" is easier on the eyes, let's switch to using it everywhere. This is not quite a mechanical s/$PERL_PATH/perl/ replacement, though. There are some places where we invoke perl from a script we generate on the fly, and those scripts do not have access to our internal shell functions. The result can be double-checked by running: ln -s /bin/false bin-wrappers/perl make test which continues to pass even after this patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-29t: provide a perl() function which uses $PERL_PATHLibravatar Jeff King1-0/+4
Once upon a time, we assumed that calling a bare "perl" in the test scripts was OK, because we would find the perl from the user's PATH, and we were only asking that perl to do basic operations that work even on old versions of perl. Later, we found that some systems really prefer to use $PERL_PATH even for these basic cases, because the system perl misbehaves in some way (e.g., by handling line endings differently). We then switched "perl" invocations to "$PERL_PATH" to respect the user's choice. Having to use "$PERL_PATH" is ugly and cumbersome, though. Instead, let's provide a perl() shell function that tests can use, which will transparently do the right thing. Unfortunately, test writers still have to use $PERL_PATH in certain situations, so we still need to keep the advice in the README. Note that this may fix test failures in t5004, t5503, t6002, t6003, t6300, t8001, and t8002, depending on your system's perl setup. All of these can be detected by running: ln -s /bin/false bin-wrappers/perl make test which fails before this patch, and passes after. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-28Windows: a test_cmp that is agnostic to random LF <> CRLF conversionsLibravatar Johannes Sixt1-0/+66
In a number of tests, output that was produced by a shell script is compared to expected output using test_cmp. Unfortunately, the MSYS bash-- when invoked via git, such as in hooks--converts LF to CRLF on output (as produced by echo and printf), which leads to many false positives. Implements a diff tool that undoes the converted CRLF. To avoid that sub-processes are spawned (which is very slow on Windows), the tool is implemented as a shell function. Diff is invoked as usual only when a difference is detected by the shell code. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-05Merge branch 'tr/test-v-and-v-subtest-only'Libravatar Junio C Hamano1-2/+4
Allows N instances of tests run in parallel, each running 1/N parts of the test suite under Valgrind, to speed things up. * tr/test-v-and-v-subtest-only: perf-lib: fix start/stop of perf tests test-lib: support running tests under valgrind in parallel test-lib: allow prefixing a custom string before "ok N" etc. test-lib: valgrind for only tests matching a pattern test-lib: verbose mode for only tests matching a pattern test-lib: self-test that --verbose works test-lib: rearrange start/end of test_expect_* and test_skip test-lib: refactor $GIT_SKIP_TESTS matching test-lib: enable MALLOC_* for the actual tests
2013-06-20Merge branch 'fc/show-non-empty-errors-in-test'Libravatar Junio C Hamano1-0/+12
* fc/show-non-empty-errors-in-test: test: test_must_be_empty helper
2013-06-18test-lib: rearrange start/end of test_expect_* and test_skipLibravatar Thomas Rast1-2/+4
This moves * the early setup part from test_skip to a new function test_start_ * the final common parts of test_expect_* to a new function test_finish_ to make the next commit more obvious. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-09test: test_must_be_empty helperLibravatar Junio C Hamano1-0/+12
There are quite a lot places where an output file is expected to be empty, and we fail the test when it is not. The output from running the test script with -i -v can be helped if we showed the unexpected contents at that point. We could of course do >expected.empty && test_cmp expected.empty actual but this is commmon enough to be done with a dedicated helper. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07tests: introduce test_ln_s_addLibravatar Johannes Sixt1-0/+17
Add a new function that creates a symbolic link and adds it to the index to be used in cases where a symbolic link is not required on the file system. We will use it to remove many SYMLINKS prerequisites from test cases. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-22Merge branch 'jc/apply-ws-fix-tab-in-indent' into maintLibravatar Junio C Hamano1-0/+4
* jc/apply-ws-fix-tab-in-indent: test: resurrect q_to_tab apply --whitespace=fix: avoid running over the postimage buffer
2013-04-03Merge branch 'tr/valgrind'Libravatar Junio C Hamano1-0/+3
Let us use not just memgrind but other *grind debuggers. * tr/valgrind: tests: notice valgrind error in test_must_fail tests --valgrind: provide a mode without --track-origins tests: parameterize --valgrind option t/README: --valgrind already implies -v
2013-04-03Merge branch 'jc/apply-ws-fix-tab-in-indent'Libravatar Junio C Hamano1-0/+4
"git apply --whitespace=fix" was not prepared to see a line getting longer after fixing whitespaces (e.g. tab-in-indent aka Python). * jc/apply-ws-fix-tab-in-indent: test: resurrect q_to_tab apply --whitespace=fix: avoid running over the postimage buffer
2013-04-01Merge branch 'bc/append-signed-off-by'Libravatar Junio C Hamano1-4/+4
Consolidate codepaths that inspect log-message-to-be and decide to add a new Signed-off-by line in various commands. * bc/append-signed-off-by: git-commit: populate the edit buffer with 2 blank lines before s-o-b Unify appending signoff in format-patch, commit and sequencer format-patch: update append_signoff prototype t4014: more tests about appending s-o-b lines sequencer.c: teach append_signoff to avoid adding a duplicate newline sequencer.c: teach append_signoff how to detect duplicate s-o-b sequencer.c: always separate "(cherry picked from" from commit body sequencer.c: require a conforming footer to be preceded by a blank line sequencer.c: recognize "(cherry picked from ..." as part of s-o-b footer t/t3511: add some tests of 'cherry-pick -s' functionality t/test-lib-functions.sh: allow to specify the tag name to test_commit commit, cherry-pick -s: remove broken support for multiline rfc2822 fields sequencer.c: rework search for start of footer to improve clarity
2013-04-01tests: notice valgrind error in test_must_failLibravatar Thomas Rast1-0/+3
We tell valgrind to return 126 if it notices that something is wrong, but we did not actually handle this in test_must_fail, leading to false negatives. Catch and report it. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29test: resurrect q_to_tabLibravatar Junio C Hamano1-0/+4
New test may want to use this helper; keep it for them that do not need to protect literal SP. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-22apply --whitespace=fix: avoid running over the postimage bufferLibravatar Junio C Hamano1-2/+2
Originally update-pre-post-images could assume that any whitespace fixing will make the result only shorter by unexpanding runs of leading SPs into HTs and removing trailing whitespaces at the end of lines. Updating the post-image we read from the patch to match the actual result can be performed in-place under this assumption. These days, however, we have tab-in-indent (aka Python) rule whose result can be longer than the original, and we do need to allocate a larger buffer than the input and replace the result. Fortunately the support for lengthening rewrite was already added when we began supporting "match while ignoring whitespace differences" mode in 86c91f91794c (git apply: option to ignore whitespace differences, 2009-08-04). We only need to correctly count the number of bytes necessary to hold the updated result and tell the function to allocate a new buffer. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-12t/test-lib-functions.sh: allow to specify the tag name to test_commitLibravatar Brandon Casey1-4/+4
The <message> part of test_commit() may not be appropriate for a tag name. So let's allow test_commit to accept a fourth argument to specify the tag name. Signed-off-by: Brandon Casey <bcasey@nvidia.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-22tests: move test_cmp_rev to test-lib-functionsLibravatar Martin von Zweigbergk1-0/+7
A function for checking that two given parameters refer to the same revision was defined in several places, so move the definition to test-lib-functions.sh instead. Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>