| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
To allow developers to run the testsuite with a different algorithm than
the default, provide an environment variable, GIT_TEST_DEFAULT_HASH, to
specify the algorithm to use. Compute the fixed constants using
test_oid. Move the constant initialization down below the point where
test-lib-functions.sh is loaded so the functions are defined.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some tests, we have data files which are written with a particular
hash algorithm. Instead of keeping two copies of the test files, we can
keep one, and translate the value on the fly.
In order to do so, we'll need to read both the source algorithm and the
current algorithm, so add an optional flag to the test_oid helper that
lets us look up a value for a specified hash algorithm. This should
not cause any conflicts with existing tests, since key arguments to
test_oid are allowed to contains only shell identifier characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous commits, we removed the usage of test_must_fail() for most
commands except for a set of pre-approved commands. Since that's done,
only allow test_must_fail() to run those pre-approved commands.
Obviously, we should allow `git`.
We allow `__git*` as some completion functions return an error code that
comes from a git invocation. It's good to avoid using test_must_fail
unnecessarily but it wouldn't hurt to err on the side of caution when
we're potentially wrapping a git command (like in these cases).
We also allow `test-tool` and `test-svn-fe` because these are helper
commands that are written by us and we want to catch their failure.
Finally, we allow `test_terminal` because `test_terminal` just wraps
around git commands. Also, we cannot rewrite
`test_must_fail test_terminal` as `test_terminal test_must_fail` because
test_must_fail() is a shell function and as a result, it cannot be
invoked from the test-terminal Perl script.
We opted to explicitly list the above tools instead of using a catch-all
such as `test[-_]*` because we want to be as restrictive as possible so
that in the future, someone would not accidentally introduce an
unrelated usage of test_must_fail() on an "unapproved" command.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various tests have been updated to work around issues found with
shell utilities that come with busybox etc.
* dd/test-with-busybox:
t5703: feed raw data into test-tool unpack-sideband
t4124: tweak test so that non-compliant diff(1) can also be used
t7063: drop non-POSIX argument "-ls" from find(1)
t5616: use rev-parse instead to get HEAD's object_id
t5003: skip conversion test if unzip -a is unavailable
t5003: drop the subshell in test_lazy_prereq
test-lib-functions: test_cmp: eval $GIT_TEST_CMP
t4061: use POSIX compliant regex(7)
|
|
A Windows-specific test element has been made more robust against
misuse from both user's environment and programmer's errors.
* js/mingw-is-hidden-test-fix:
t: restrict `is_hidden` to be called only on Windows
mingw: make test_path_is_hidden more robust
t: consolidate the `is_hidden` functions
|
|
The function won't work anywhere else, so let's mark it as an explicit
bug if it is called on a non-Windows platform.
Let's also rename the function to avoid cluttering the global namespace
with an overly-generic function name.
While at it, we also fix the code comment above that function: the
lower-case `windows` refers to something different than `Windows`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function uses Windows' system tool `attrib` to determine the state
of the hidden flag of a file or directory.
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Let's use the full path to the tool instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `is_hidden` function can be used (only on Windows) to determine
whether a directory or file have their `hidden` flag set.
This function is duplicated between two test scripts. It is better to
move it into `test-lib-functions.sh` so that it is reused.
This patch is best viewed with `--color-moved`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code path in packetize() for reading stdin needs to handle NUL
bytes, so we can't rely on shell variables. However, the current code
takes a whopping 4 processes and uses a temporary file. We can do this
much more simply and efficiently by using a single perl invocation (and
we already rely on perl in the matching depacketize() function).
We'll keep the non-stdin code path as it is, since that uses zero extra
processes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The packetize() function takes its input on stdin, and requires 4
separate sub-processes to format a simple string. We can do much better
by getting the length via the shell's "${#packet}" construct. The one
caveat is that the shell can't put a NUL into a variable, so we'll have
to continue to provide the stdin form for a few calls.
There are a few other cleanups here in the touched code:
- the stdin form of packetize() had an extra stray "%s" when printing
the packet
- the converted calls in t5562 can be made simpler by redirecting
output as a block, rather than repeated appending
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shell recognises first non-assignment token as command name.
With /bin/sh linked to either /bin/bash or /bin/dash,
`cd t/perf && ./p0000-perf-lib-sanity.sh -d -i -v` reports:
> test_cmp:1: command not found: diff -u
Using `eval` to unquote $GIT_TEST_CMP as same as precedence in `git_editor`.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check the results of "rev-list --use-bitmap-index" by comparing it to
the same traversal without the bitmap option. However, this is a little
tricky to do because of some output differences (see the included
comment for details). Let's pull this out into a helper function, since
we'll be adding some similar tests.
While we're at it, let's also try to confirm that the bitmap output did
indeed use bitmaps. Since the code internally falls back to the
non-bitmap path in some cases, the tests are at risk of becoming trivial
noops.
This is a bit fragile, as not all outputs will differ (e.g., looking at
only the commits from a fully-bitmapped pack will end up exactly the
same as the normal traversal order, since it also matches the pack
order). So we'll provide an escape hatch by which tests can disable this
check (which should only be used after manually confirming that bitmaps
kicked in).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* sg/test-squelch-noise-in-commit-bulk:
test-lib-functions: suppress a 'git rev-parse' error in 'test_commit_bulk'
|
|
Recently we have declared that GIT_TEST_* variables take the
usual boolean values (it used to be that some used "non-empty
means true" and taking GIT_TEST_VAR=YesPlease as true); make
sure we notice and fail when non-bool strings are given to
these variables.
* sg/test-bool-env:
t5608-clone-2gb.sh: turn GIT_TEST_CLONE_2GB into a bool
tests: add 'test_bool_env' to catch non-bool GIT_TEST_* values
|
|
When 'test_commit_bulk' is invoked in an empty test repository, it
prints a "fatal: Needed a single revision" error, but still does what
it's supposed to do. A test helper function displaying a fatal error
and still succeeding is always suspect to be buggy, but luckily that's
not the case here: that error comes from a 'git rev-parse --verify
HEAD' command invoked in a condition, which doesn't have anything to
verify in an empty repository.
Use the '--quiet' option to suppress that error message.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 3b072c577b (tests: replace test_tristate with "git env--helper",
2019-06-21) we get the normalized bool values of various GIT_TEST_*
environment variables via 'git env--helper'. Now, while the 'git
env--helper' command itself does catch invalid values in the
environment variable or in the given --default and exits with error
(exit code 128 or 129, respectively), it's invoked in conditions like
'if ! git env--helper ...', which means that all invalid bool values
are interpreted the same as the ordinary 'false' (exit code 1). This
has led to inadvertently skipped httpd tests in our CI builds for a
couple of weeks, see 3960290675 (ci: restore running httpd tests,
2019-09-06).
Let's be more careful about what the test suite accepts as bool values
in GIT_TEST_* environment variables, and error out loud and clear on
invalid values instead of simply skipping tests. Add the
'test_bool_env' helper function to encapsulate the invocation of 'git
env--helper' and the verification of its exit code, and replace all
invocations of that command in our test framework and test suite with
a call to this new helper (except in 't0017-env-helper.sh', of
course).
$ GIT_TEST_GIT_DAEMON=YesPlease ./t5570-git-daemon.sh
fatal: bad numeric config value 'YesPlease' for 'GIT_TEST_GIT_DAEMON': invalid unit
error: test_bool_env requires bool values both for $GIT_TEST_GIT_DAEMON and for the default fallback
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case where we are using test_cmp_rev() to report not-equals, we
write `! test_cmp_rev`. However, since test_cmp_rev() contains
r1=$(git rev-parse --verify "$1") &&
r2=$(git rev-parse --verify "$2") &&
`! test_cmp_rev` will succeed if any of the rev-parses fail. This
behavior is not desired. We want the rev-parses to _always_ be
successful.
Rewrite test_cmp_rev() to optionally accept "!" as the first argument to
do a not-equals comparison. Rewrite `! test_cmp_rev` to `test_cmp_rev !`
in all tests to take advantage of this new functionality.
Also, rewrite the rev-parse logic to end with a `|| return 1` instead of
&&-chaining into the rev-comparison logic. This makes it obvious to
future readers that we explicitly intend on returning early if either of
the rev-parses fail.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --graph" for an octopus merge is sometimes colored
incorrectly, which is demonstrated and documented but not yet
fixed.
* dl/octopus-graph-bug:
t4214: demonstrate octopus graph coloring failure
t4214: explicitly list tags in log
t4214: generate expect in their own test cases
t4214: use test_merge
test-lib: let test_merge() perform octopus merges
|
|
Currently test_merge() only allows developers to merge in one branch.
However, this restriction is artificial and there is no reason why it
needs to be this way.
Extend test_merge() to allow the specification of multiple branches so
that octopus merges can be performed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first line of verbose output from each test piece now carries
the test name and number to help scanning with eyeballs.
* sg/show-failed-test-names:
tests: show the test name and number at the start of verbose output
t0000-basic: use realistic test script names in the verbose tests
|
|
Test fix.
* bc/hash-independent-tests-part-4:
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
|
|
t1410.3 ("corrupt and checks") fails when run using dash versions
before 0.5.8, with a cryptic message:
mv: cannot stat '.git/objects//e84adb2704cbd49549e52169b4043871e13432': No such file or directory
The function generating that path:
test_oid_to_path () {
echo "${1%${1#??}}/${1#??}"
}
which is supposed to produce a result like
12/3456789....
But a dash bug[*] causes it to instead expand to
/3456789...
The stream of symbols that makes up this function is hard for humans
to follow, too. The complexity mostly comes from the repeated use of
the expression ${1#??} for the basename of the loose object. Use a
variable instead --- nowadays, the dialect of shell used by Git
permits local variables, so this is cheap.
An alternative way to work around [*] is to remove the double-quotes
around test_oid_to_path's return value. That makes the expression
easier for dash to read, but harder for humans. Let's prefer the
rephrasing that's helpful for humans, too.
Noticed by building on Ubuntu trusty, which uses dash 0.5.7.
[*] Fixed by v0.5.8~13 ("[EXPAND] Propagate EXP_QPAT in subevalvar, 2013-08-23).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The verbose output of every test looks something like this:
expecting success:
echo content >file &&
git add file &&
git commit -m "add file"
[master (root-commit) d1fbfbd] add file
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 file
ok 1 - commit works
i.e. first an "expecting success" (or "checking known breakage") line
followed by the commands to be executed, then the output of those
comamnds, and finally an "ok"/"not ok" line containing the test name.
Note that the test's name is only shown at the very end.
With '-x' tracing enabled and/or in longer tests the verbose output
might be several screenfulls long, making it harder than necessary to
find where the output of the test with a given name starts (especially
when the outputs to different file descriptors are racing, and the
"expecting success"/command block arrives earlier than the "ok" line
of the previous test).
Print the test name at the start of the test's verbose output, i.e. at
the end of the "expecting success" and "checking known breakage"
lines, to make the start of a particular test a bit easier to
recognize. Also print the test script and test case numbers, to help
those poor souls who regularly have to scan through the combined
verbose output of several test scripts.
So the dummy test above would start like this:
expecting success of 9999.1 'commit works':
echo content >file &&
[...]
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update to the tests to help SHA-256 transition continues.
* bc/hash-independent-tests-part-4:
t2203: avoid hard-coded object ID values
t1710: make hash independent
t1007: remove SHA1 prerequisites
t0090: make test pass with SHA-256
t0027: make hash size independent
t6030: make test work with SHA-256
t5000: make hash independent
t1450: make hash size independent
t1410: make hash size independent
t: add helper to convert object IDs to paths
|
|
A test helper has been introduced to optimize preparation of test
repositories with many simple commits, and a handful of test
scripts have been updated to use it.
* jk/test-commit-bulk:
t6200: use test_commit_bulk
t5703: use test_commit_bulk
t5702: use test_commit_bulk
t3311: use test_commit_bulk
t5310: increase the number of bitmapped commits
test-lib: introduce test_commit_bulk
|
|
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
|
|
Test update.
* js/t0001-case-insensitive:
t0001: fix on case-insensitive filesystems
|
|
Some tests need to create a string of commits. Doing this with
test_commit is very heavy-weight, as it needs at least one process per
commit (and in fact, uses several).
For bulk creation, we can do much better by using fast-import, but it's
often a pain to generate the input. Let's provide a helper to do so.
We'll use t5310 as a guinea pig, as it has three 10-commit loops. Here
are hyperfine results before and after:
[before]
Benchmark #1: ./t5310-pack-bitmaps.sh --root=/var/ram/git-tests
Time (mean ± σ): 2.846 s ± 0.305 s [User: 3.042 s, System: 0.919 s]
Range (min … max): 2.250 s … 3.210 s 10 runs
[after]
Benchmark #1: ./t5310-pack-bitmaps.sh --root=/var/ram/git-tests
Time (mean ± σ): 2.210 s ± 0.174 s [User: 2.570 s, System: 0.604 s]
Range (min … max): 1.999 s … 2.590 s 10 runs
So we're over 20% faster, while making the callers slightly shorter. We
added a lot more lines in test-lib-function.sh, of course, and the
helper is way more featureful than we need here. But my hope is that it
will be flexible enough to use in more places.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several places in our testsuite where we want to insert a
slash after an object ID to make it into a path we can reference under
.git/objects, and we have various ways of doing so. Add a helper to
provide a standard way of doing this that works for all size hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On a case-insensitive filesystem, such as HFS+ or NTFS, it is possible
that the idea Bash has of the current directory differs in case from
what Git thinks it is. That's totally okay, though, and we should not
expect otherwise.
On Windows, for example, when you call
cd C:\GIT-SDK-64
in a PowerShell and there exists a directory called `C:\git-sdk-64`, the
current directory will be reported in all upper-case. Even in a Bash
that you might call from that PowerShell. Git, however, will have
normalized this via `GetFinalPathByHandle()`, and the expectation in
t0001 that the recorded gitdir will match what `pwd` says will be
violated.
Let's address this by comparing these paths in a case-insensitive
manner when `core.ignoreCase` is `true`.
Reported by Jameson Miller.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GIT_TEST_FAIL_PREREQS variable from being "non-empty?" to
being a more standard boolean variable. I recently added the variable
in dfe1a17df9 ("tests: add a special setup where prerequisites fail",
2019-05-13), having to add another "non-empty?" special-case is what
prompted me to write the "git env--helper" utility being used here.
Converting this one is a bit tricky since we use it so early and
frequently in the guts of the test code itself, so let's set a
GIT_TEST_FAIL_PREREQS_INTERNAL which can be tested with the old "test
-n" for the purposes of the shell code, and change the user-exposed
and documented GIT_TEST_FAIL_PREREQS variable to a boolean.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test_tristate helper introduced in 83d842dc8c ("tests: turn on
network daemon tests by default", 2014-02-10) can now be better
implemented with "git env--helper" to give the variables in question
the standard boolean behavior.
The reason for the "tristate" was to have all of false/true/auto,
where "auto" meant either "false" or "true" depending on what the
fallback was. With the --default option to "git env--helper" we can
simply have e.g. GIT_TEST_HTTPD where we know if it's true because the
user asked explicitly ("true"), or true implicitly ("auto").
This breaks backwards compatibility for explicitly setting "auto" for
these variables, but I don't think anyone cares. That was always
intended to be internal.
This means the test_normalize_bool() code in test-lib-functions.sh
goes away in addition to test_tristate(). We still need the
test_skip_or_die() helper, but now it takes the variable name instead
of the value, and uses "git env--bool" to distinguish a default "true"
from an explicit "true" (in those "explicit true" cases we want to
fail the test in question).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As discussed in [1] there's a regression in the "pu" branch now
because a new test implicitly assumed that a previous test guarded by
a prerequisite had been run. Add a "GIT_TEST_FAIL_PREREQS" special
test setup where we'll skip (nearly) all tests guarded by
prerequisites, allowing us to easily emulate those platform where we
don't run these tests.
As noted in the documentation I'm adding I'm whitelisting the SYMLINKS
prerequisite for now. A lot of tests started failing if we lied about
not supporting symlinks. It's also unlikely that we'll have a failing
test due to a hard dependency on symlinks without that being the
obvious cause, so for now it's not worth the effort to make it work.
1. https://public-inbox.org/git/nycvar.QRO.7.76.6.1905131531000.44@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code tightening against a "wrong" object appearing where an object
of a different type is expected, instead of blindly assuming that
the connection between objects are correctly made.
* tb/unexpected:
rev-list: detect broken root trees
rev-list: let traversal die when --missing is not in use
get_commit_tree(): return NULL for broken tree
list-objects.c: handle unexpected non-tree entries
list-objects.c: handle unexpected non-blob entries
t: introduce tests for unexpected object types
t: move 'hex2oct' into test-lib-functions.sh
|
|
Test framework update to more robustly clean up leftover files and
processes after tests are done.
* sg/test-atexit:
t9811-git-p4-label-import: fix pipeline negation
git p4 test: disable '-x' tracing in the p4d watchdog loop
git p4 test: simplify timeout handling
git p4 test: clean up the p4d cleanup functions
git p4 test: use 'test_atexit' to kill p4d and the watchdog process
t0301-credential-cache: use 'test_atexit' to stop the credentials helper
tests: use 'test_atexit' to stop httpd
git-daemon: use 'test_atexit` to stop 'git-daemon'
test-lib: introduce 'test_atexit'
t/lib-git-daemon: make sure to kill the 'git-daemon' process
test-lib: fix interrupt handling with 'dash' and '--verbose-log -x'
|
|
The helper 'hex2oct' is used to convert base-16 encoded data into a
base-8 binary form, and is useful for preparing data for commands that
accept input in a binary format, such as 'git hash-object', via
'printf'.
This helper is defined identically in three separate places throughout
't'. Move the definition to test-lib-function.sh, so that it can be used
in new test suites, and its definition is not redundant.
This will likewise make our job easier in the subsequent commit, which
also uses 'hex2oct'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running Apache, 'git daemon', or p4d, we want to kill them at the
end of the test script, otherwise a leftover daemon process will keep
its port open indefinitely, and thus will interfere with subsequent
executions of the same test script.
So far, we stop these daemon processes "manually", i.e.:
- by registering functions or commands in the trap on EXIT to stop
the daemon while preserving the last seen exit code before the
trap (to deal with a failure when run with '--immediate' or with
interrupts by ctrl-C),
- and by invoking these functions/commands last thing before
'test_done' (and sometimes restoring the test framework's default
trap on EXIT, to prevent the daemons from being killed twice).
On one hand, we do this inconsistently, e.g. 'git p4' tests invoke
different functions in the trap on EXIT and in the last test before
'test_done', and they neither restore the test framework's default trap
on EXIT nor preserve the last seen exit code. On the other hand, this
is error prone, because, as shown in a previous patch in this series,
any output from the cleanup commands in the trap on EXIT can prevent a
proper cleanup when a test script run with '--verbose-log' and certain
shells, notably 'dash', is interrupted.
Let's introduce 'test_atexit', which is loosely modeled after
'test_when_finished', but has a broader scope: rather than running the
commands after the current test case, run them when the test script
finishes, and also run them when the test is interrupted, or exits
early in case of a failure while the '--immediate' option is in
effect.
When running the cleanup commands at the end of a successful test,
then they will be run in 'test_done' before it removes the trash
directory, i.e. the cleanup commands will still be able to access any
pidfiles or socket files in there. When running the cleanup commands
after an interrupt or failure with '--immediate', then they will be
run in the trap on EXIT. In both cases they will be run in
'test_eval_', i.e. both standard error and output of all cleanup
commands will go where they should according to the '-v' or
'--verbose-log' options, and thus won't cause any troubles when
interrupting a test script run with '--verbose-log'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a helper function to ensure that a given path is a non-empty file,
and give an error message when it is not.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rb/no-dev-zero-in-test:
t5562: replace /dev/zero with a pipe from generate_zero_bytes
t5318: replace use of /dev/zero with generate_zero_bytes
test-lib-functions.sh: add generate_zero_bytes function
|
|
t5318 and t5562 used /dev/zero, which is not portable. This function
provides both a fixed block of NUL bytes and an infinite stream of NULs.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a '!' character to start a non-matching pattern bracket
expression, as specified by POSIX in Shell Command Language section
2.13.1 Patterns Matching a Single Character [1].
I used '^' instead in three places in the previous three commits, to
verify that the arguments of the '--stress=' and '--stress-limit='
options and the values of various '*_PORT' environment variables are
valid numbers. With certain shells, at least with dash (upstream and
in Ubuntu 14.04) and mksh, this led to various undesired behaviors:
# error message in case of a valid number
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=8
error: --stress=<N> requires the number of jobs to run
# not the expected error message
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=foo
./t3903-stash.sh: 238: test: Illegal number: foo
# no error message at all?!
$ mksh ./t3903-stash.sh --stress=foo
$ echo $?
0
Some other shells, e.g. Bash (even in posix mode), ksh, dash in Ubuntu
16.04 or later, are apparently happy to accept '^' just as well.
[1] http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_13
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unfortunately, we have a few flaky tests, whose failures tend to be
hard to reproduce. We've found that the best we can do to reproduce
such a failure is to run the test script repeatedly while the machine
is under load, and wait in the hope that the load creates enough
variance in the timing of the test's commands that a failure is
evenually triggered. I have a command to do that, and I noticed that
two other contributors have rolled their own scripts to do the same,
all choosing slightly different approaches.
To help reproduce failures in flaky tests, introduce the '--stress'
option to run a test script repeatedly in multiple parallel jobs until
one of them fails, thereby using the test script itself to increase
the load on the machine.
The number of parallel jobs is determined by, in order of precedence:
the number specified as '--stress=<N>', or the value of the
GIT_TEST_STRESS_LOAD environment variable, or twice the number of
available processors (as reported by the 'getconf' utility), or 8.
Make '--stress' imply '--verbose -x --immediate' to get the most
information about rare failures; there is really no point in spending
all the extra effort to reproduce such a failure, and then not know
which command failed and why.
To prevent the several parallel invocations of the same test from
interfering with each other:
- Include the parallel job's number in the name of the trash
directory and the various output files under 't/test-results/' as
a '.stress-<Nr>' suffix.
- Add the parallel job's number to the port number specified by the
user or to the test number, so even tests involving daemons
listening on a TCP socket can be stressed.
- Redirect each parallel test run's verbose output to
't/test-results/$TEST_NAME.stress-<nr>.out', because dumping the
output of several parallel running tests to the terminal would
create a big ugly mess.
For convenience, print the output of the failed test job at the end,
and rename its trash directory to end with the '.stress-failed'
suffix, so it's easy to find in a predictable path (OTOH, all absolute
paths recorded in the trash directory become invalid; we'll see
whether this causes any issues in practice). If, in an unlikely case,
more than one jobs were to fail nearly at the same time, then print
the output of all failed jobs, and rename the trash directory of only
the last one (i.e. with the highest job number), as it is the trash
directory of the test whose output will be at the bottom of the user's
terminal.
Based on Jeff King's 'stress' script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.
Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.
Take special care of test scripts with "low" numbers:
- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.
- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.
Note that the 'git p4' tests are unlike the other tests involving
daemons in that:
- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].
- The port is not overridable via an environment variable.
With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.
[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and
bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test framework has been updated to make a bug in the test script
(as opposed to bugs in Git that are discovered by running the
tests) stand out more prominently.
* sg/test-BUG:
tests: send "bug in the test script" errors to the script's stderr
|
|
The 'test_cmp_rev' helper is merely a wrapper around 'test_cmp'
checking the output of two 'git rev-parse' commands, which means that
its output on failure is not particularly informative, as it's
basically two OIDs with a bit of extra clutter of the diff header, but
without any indication of which two revisions have caused the failure:
--- expect.rev 2018-11-17 14:02:11.569747033 +0000
+++ actual.rev 2018-11-17 14:02:11.569747033 +0000
@@ -1 +1 @@
-d79ce1670bdcb76e6d1da2ae095e890ccb326ae9
+139b20d8e6c5b496de61f033f642d0e3dbff528d
It also pollutes the test repo with these two intermediate files,
though that doesn't seem to cause any complications in our current
tests (meaning that I couldn't find any tests that have to work around
the presence of these files by explicitly removing or ignoring them).
Enhance 'test_cmp_rev' to provide a more useful output on failure with
less clutter:
error: two revisions point to different objects:
'HEAD^': d79ce1670bdcb76e6d1da2ae095e890ccb326ae9
'extra': 139b20d8e6c5b496de61f033f642d0e3dbff528d
Doing so is more convenient when storing the OIDs outputted by 'git
rev-parse' in a local variable each, which, as a bonus, won't pollute
the repository with intermediate files.
While at it, also ensure that 'test_cmp_rev' is invoked with the right
number of parameters, namely two.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of the functions in our test library check that they were invoked
properly with conditions like this:
test "$#" = 2 ||
error "bug in the test script: not 2 parameters to test-expect-success"
If this particular condition is triggered, then 'error' will abort the
whole test script with a bold red error message [1] right away.
However, under certain circumstances the test script will be aborted
completely silently, namely if:
- a similar condition in a test helper function like
'test_line_count' is triggered,
- which is invoked from the test script's "main" shell [2],
- and the test script is run manually (i.e. './t1234-foo.sh' as
opposed to 'make t1234-foo.sh' or 'make test') [3]
- and without the '--verbose' option,
because the error message is printed from within 'test_eval_', where
standard output is redirected either to /dev/null or to a log file.
The only indication that something is wrong is that not all tests in
the script are executed and at the end of the test script's output
there is no "# passed all N tests" message, which are subtle and can
easily go unnoticed, as I had to experience myself.
Send these "bug in the test script" error messages directly to the
test scripts standard error and thus to the terminal, so those bugs
will be much harder to overlook. Instead of updating all ~20 such
'error' calls with a redirection, let's add a BUG() function to
'test-lib.sh', wrapping an 'error' call with the proper redirection
and also including the common prefix of those error messages, and
convert all those call sites [4] to use this new BUG() function
instead.
[1] That particular error message from 'test_expect_success' is
printed in color only when running with or without '--verbose';
with '--tee' or '--verbose-log' the error is printed without
color, but it is printed to the terminal nonetheless.
[2] If such a condition is triggered in a subshell of a test, then
'error' won't be able to abort the whole test script, but only the
subshell, which in turn causes the test to fail in the usual way,
indicating loudly and clearly that something is wrong.
[3] Well, 'error' aborts the test script the same way when run
manually or by 'make' or 'prove', but both 'make' and 'prove' pay
attention to the test script's exit status, and even a silently
aborted test script would then trigger those tools' usual
noticable error messages.
[4] Strictly speaking, not all those 'error' calls need that
redirection to send their output to the terminal, see e.g.
'test_expect_success' in the opening example, but I think it's
better to be consistent.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the "test installed Git" mode of our test suite to work better.
* js/test-git-installed:
tests: explicitly use `git.exe` on Windows
tests: do not require Git to be built when testing an installed Git
t/lib-gettext: test installed git-sh-i18n if GIT_TEST_INSTALLED is set
tests: respect GIT_TEST_INSTALLED when initializing repositories
tests: fix GIT_TEST_INSTALLED's PATH to include t/helper/
|
|
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
|
Junio C Hamano
brian m. carlson
Denton Liu
Johannes Schindelin
Jeff King
Đoàn Trần Công Danh
SZEDER Gábor
Jonathan Nieder
Ævar Arnfjörð Bjarmason
Taylor Blau
Rohit Ashiwal
Randall S. Becker