summaryrefslogtreecommitdiff
path: root/t/t9806-git-p4-options.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-11-19tests(git-p4): transition to the default branch name `main`Libravatar Johannes Schindelin1-10/+10
In the previous commits, we adjusted the test suite to use the branch name `main` for initial branches. The `git p4`-related tests are a bit harder to adjust because `git p4` uses the ref `refs/heads/p4/master` to track the remote branches, and for now, we do not want to change that (this might be the subject of a future patch series). We only need to adjust for the actual initial branch name to be changed to `main`. This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19tests: mark tests relying on the current default for `init.defaultBranch`Libravatar Johannes Schindelin1-0/+3
In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-14git p4 test: use 'test_atexit' to kill p4d and the watchdog processLibravatar Johannes Schindelin1-5/+0
Use 'test_atexit' to run cleanup commands to stop 'p4d' at the end of the test script or upon interrupt or failure, as it is shorter, simpler, and more robust than registering such cleanup commands in the trap on EXIT in the test scripts. Note that one of the test scripts, 't9801-git-p4-branch.sh', stops and then re-starts 'p4d' twice in the middle of the script; take care that the cleanup functions to stop 'p4d' are only registered once. Note also that 'git p4' tests invoke different functions in the trap on EXIT ('cleanup') and in the last test before 'test_done' ('kill_p4d'). Register both of these functions with 'test_atexit' for now, and a a later patch in this series will then clean up the redundancy. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16t9000-t9999: fix broken &&-chainsLibravatar Eric Sunshine1-1/+1
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-13git-p4: support git worktreesLibravatar Luke Diamand1-0/+32
git-p4 would attempt to find the git directory using its own specific code, which did not know about git worktrees. Rework it to use "git rev-parse --git-dir" instead. Add test cases for worktree usage and specifying git directory via --git-dir and $GIT_DIR. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-26git p4 test: translate windows paths for cygwinLibravatar Pete Wyckoff1-1/+1
Native windows binaries do not understand posix-like path mapping offered by cygwin. Convert paths to native using "cygpath --windows" before presenting them to p4d. This is done using the AltRoots mechanism of p4. Both the posix and windows forms are put in the client specification, allowing p4 to find its location by native path even though the environment reports a different PWD. Shell operations in tests will use the normal form of $cli, which will look like a posix path in cygwin, while p4 will use AltRoots to match against the windows form of the working directory. This mechanism also handles the symlink issue that was fixed in 23bd0c9 (git p4 test: use real_path to resolve p4 client symlinks, 2012-06-27). Now that every p4 client view has an AltRoots with the real_path in it, explicitly calculating the real_path elsewhere is not necessary. Thanks-to: Sebastian Schuberth <sschuberth@gmail.com> Thanks-to: Johannes Sixt <j6t@kdbg.org> fixup! git p4 test: translate windows paths for cygwin Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-26git p4 test: use client_view in t9806Libravatar Pete Wyckoff1-28/+21
Use the standard client_view function from lib-git-p4.sh instead of building one by hand. This requires a bit of rework, using the current value of $P4CLIENT for the client name. It also reorganizes the test to isolate changes to $P4CLIENT and $cli in a subshell. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: fix submit when no master branchLibravatar Pete Wyckoff1-0/+25
It finds its upstream and applies the commit properly, but the sync step will fail unless it is told which branch to work on. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4 test: keep P4CLIENT changes inside subshellsLibravatar Pete Wyckoff1-2/+5
Tests assume that this is set to something valid. Make sure that the 'clone --use-client-spec' does not leak its changes out into the rest of the tests. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: fix sync --branch when no master branchLibravatar Pete Wyckoff1-4/+4
It is legal to sync a branch with a different name than refs/remotes/p4/master, and to do so even when master does not exist. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: fail gracefully on sync with no master branchLibravatar Pete Wyckoff1-5/+4
If --branch was used to build a repository with no refs/remotes/p4/master, future syncs will not know which branch to sync. Notice this situation and print a helpful error message. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: allow short ref names to --branchLibravatar Pete Wyckoff1-0/+21
For a clone or sync, --branch says where the newly imported branch should go, or which existing branch to sync up. It takes an argument, which is currently either something that starts with "refs/", or if not, "refs/heads/p4" is prepended. Putting it in heads seems like a bad default; these should go in remotes/p4/ in most situations. Make that the new default, and be more liberal in the form of the branch name. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: clone --branch should checkout masterLibravatar Pete Wyckoff1-1/+1
When using the --branch argument to "git p4 clone", one might specify a destination for p4 changes different from the default refs/remotes/p4/master. Both cases should create a master branch and checkout files. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: create p4/HEAD on initial cloneLibravatar Pete Wyckoff1-0/+23
There is code to create a symbolic reference from p4/HEAD to p4/master. This allows saying "git show p4" as a shortcut to "git show p4/master", for example. But this reference was only created on the second "git p4 sync" (or first sync after a clone). Make it work on the initial clone or sync. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: test sync/clone --branch behaviorLibravatar Pete Wyckoff1-4/+49
Add failing tests to document behavior when there are multiple p4 branches, as created using the --branch option. In particular: Using clone --branch populates the specified branch correctly, but dies with an error when trying to checkout master. Calling sync without a master branch dies with an error looking for master. When there are two or more branches, a sync does nothing due to branch detection code, but that is expected. Using sync --branch to try to update just a particular branch updates no branch, but appears to succeed. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-27git p4 test: cleanup_git should make a new $gitLibravatar Pete Wyckoff1-1/+0
For convenience, leave one in place at the end of each test so that it is not necessary to build a new one. This makes it consistent with $cli. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-27git p4 test: simplify quoting involving TRASH_DIRECTORYLibravatar Pete Wyckoff1-8/+6
For temporary files that are created in the top-level TRASH_DIRECTORY, trust that the tests do not chdir except in subshells, and avoid some quoting. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-27git p4 test: use real_path to resolve p4 client symlinksLibravatar Pete Wyckoff1-1/+1
The p4 program is finicky about making sure the recorded client Root matches the current working directory. The way it discovers the latter seems to be to inspect shell variable $PWD. This could involve symlinks, that while leading to the same place as the client Root, look different, and cause p4 to fail. Resolve all client paths using "test-path-utils real_path $path". This removes ".." and resolves all symlinks. Discovered while running with --root=/dev/shm, which is a link to /run/shm. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-09git p4: use "git p4" directly in testsLibravatar Pete Wyckoff1-14/+14
Drop the $GITP4 variable that was used to specify the script in contrib/fast-import/. The command is called "git p4" now, not "git-p4". Note that configuration variables will remain in a section called "git-p4". Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-11git-p4: adjust test to adhere to stricter useClientSpecLibravatar Pete Wyckoff1-2/+2
This test relied on what now is seen as broken behavior in --use-client-spec. Change it to make sure it works according to the new behavior as described in ecb7cf9 (git-p4: rewrite view handling, 2012-01-02) and c700b68 (git-p4: test client view handling, 2012-01-02). Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: test and document --use-client-specLibravatar Pete Wyckoff1-0/+46
The depot path is required, even with this option. Make sure git-p4 fails and exits with non-zero. Contents in the specified depot path will be rearranged according to the client spec. Test this and add a note in the docs. Leave an XXX suggesting that this is somewhat confusing behavior that might be good to fix later. Function stripRepoPath() looks at self.useClientSpec. Make sure this is set both for command-line option --use-client-spec and for configuration variable git-p4.useClientSpec. Test this. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: test --keep-pathLibravatar Pete Wyckoff1-0/+24
Make sure it leaves the path, below //depot, in git. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: test --max-changesLibravatar Pete Wyckoff1-0/+10
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: document and test --import-localLibravatar Pete Wyckoff1-0/+22
Explain that it is needed on future syncs to find p4 branches in refs/heads. Test this behavior. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: honor --changesfile option and testLibravatar Pete Wyckoff1-0/+23
When an explicit list of changes is given, it makes no sense to use @all or @3,5 or any of the other p4 revision specifiers. Make the code notice when this happens, instead of just ignoring --changesfile. Test it. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: document and test clone --branchLibravatar Pete Wyckoff1-0/+11
Clone with --branch will not checkout HEAD, unless the branch happens to be called the default refs/remotes/p4/master. The --branch option is most useful with sync; give an example of that. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: clone does not use --git-dirLibravatar Pete Wyckoff1-0/+34
Complain if --git-dir is given during a clone. It has no effect. Only --destination and --bare can change where the newly cloned git dir will be. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>