summaryrefslogtreecommitdiff
path: root/t/t9400-git-cvsserver-server.sh
AgeCommit message (Collapse)AuthorFilesLines
2012-04-23Merge branch 'bw/test-fix-grep-gnuism'Libravatar Junio C Hamano1-2/+2
Fix two places that were the only place in the test suite that gave "a\+" to platform grep and expected it to mean one or more "a", which is a blatant GNUism. * bw/test-fix-grep-gnuism: t9400: fix gnuism in grep
2012-04-19t9400: fix gnuism in grepLibravatar Junio C Hamano1-2/+2
Using "\+" in "grep" and expecting that it means one or more is a GNUism. Spell it in a dumb and portable way. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-11tests: modernise style: more uses of test_line_countLibravatar Stefano Lattarini1-2/+2
Prefer: test_line_count <OP> COUNT FILE over: test $(wc -l <FILE) <OP> COUNT (or similar usages) in several tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-1/+1
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Skip tests in a way that makes sense under TAPLibravatar Ævar Arnfjörð Bjarmason1-3/+3
SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'gv/portable'Libravatar Junio C Hamano1-1/+1
* gv/portable: test-lib: use DIFF definition from GIT-BUILD-OPTIONS build: propagate $DIFF to scripts Makefile: Tru64 portability fix Makefile: HP-UX 10.20 portability fixes Makefile: HPUX11 portability fixes Makefile: SunOS 5.6 portability fix inline declaration does not work on AIX Allow disabling "inline" Some platforms lack socklen_t type Make NO_{INET_NTOP,INET_PTON} configured independently Makefile: some platforms do not have hstrerror anywhere git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition test_cmp: do not use "diff -u" on platforms that lack one fixup: do not unconditionally disable "diff -u" tests: use "test_cmp", not "diff", when verifying the result Do not use "diff" found on PATH while building and installing enums: omit trailing comma for portability Makefile: -lpthread may still be necessary when libc has only pthread stubs Rewrite dynamic structure initializations to runtime assignment Makefile: pass CPPFLAGS through to fllow customization Conflicts: Makefile wt-status.h
2010-05-31tests: use "test_cmp", not "diff", when verifying the resultLibravatar Gary V. Vaughan1-1/+1
In tests, call test_cmp rather than raw diff where possible (i.e. if the output does not go to a pipe), to allow the use of, say, 'cmp' when the default 'diff -u' is not compatible with a vendor diff. When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-19git-cvsserver: test for pserver authentication supportLibravatar Ævar Arnfjörð Bjarmason1-1/+15
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-11t9400: Use test_cmp when appropriateLibravatar Junio C Hamano1-12/+12
Consistently using test_cmp would make debugging test scripts far easier, as output from them run under "-v" option becomes readable. Besides, some platforms' "diff" implementations lack "-q" option. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-26fix portability issues with $ in double quotesLibravatar Stephen Boyd1-9/+9
Using a dollar sign in double quotes isn't portable. Escape them with a backslash or replace the double quotes with single quotes. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-17Make sure $PERL_PATH is defined when the test suite is run.Libravatar Philippe Bruhat (BooK)1-1/+1
Some test scripts run Perl scripts as if they were git-* scripts, and thus need to use the same perl that will be put in the shebang line of git*.perl commands. $PERL_PATH therefore needs to be used instead of a bare "perl". The tests can fail if another perl is found in $PATH before the one defined in $PERL_PATH. Example test failure caused by this: the perl defined in $PERL_PATH has Error.pm installed, and therefore the Git.pm's Makefile.PL doesn't install the private copy. The perl from $PATH doesn't have Error.pm installed, and all git*.perl scripts invoked during the test will fail loading Error.pm. Makefile patch by Jeff King <peff@peff.net>. Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-08tests: skip perl tests if NO_PERL is definedLibravatar Jeff King1-0/+4
These scripts all test git programs that are written in perl, and thus obviously won't work if NO_PERL is defined. We pass NO_PERL to the scripts from the building Makefile via the GIT-BUILD-OPTIONS file. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-05tests: remove exit after test_done callLibravatar Jeff King1-2/+0
test_done always exits, so this line is never executed. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-19test suite: Use 'say' to say something instead of 'test_expect_success'Libravatar Johannes Sixt1-2/+2
Some tests report that some tests will be skipped. They used 'test_expect_success' with a trivially successful test. Nowadays we have the helper function 'say' for this purpose. In on case, 'say_color skip' is replaced by 'say' because the former is not intended as a public API. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-18t9400, t9401: Do not force hard-linked cloneLibravatar Johannes Sixt1-2/+2
The tests do not depend on that the clones are hard-linked, but used --local only as an optimization: At the time that --local was used first in t9400 hard-linked clones were not the default, yet. By removing --local, we help filesystems that do not support hard-links. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2008-10-31Avoid using non-portable `echo -n` in tests.Libravatar Brian Gernhardt1-1/+1
Expecting echo to recognise -n is a BSDism. Using printf is far more portable. Discovered on OS X 10.5.5 in t4030-diff-textconv.sh and changed in all the test scripts. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-05"blame -c" should be compatible with "annotate"Libravatar Junio C Hamano1-0/+13
There is no reason to have a separate variable cmd_is_annotate; OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility output, and we should produce the same output even when the command was not invoked as "annotate" but as "blame -c". Noticed by Pasky. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-20cvsserver: Add testsuite for packed refsLibravatar Lars Noschinski1-0/+7
Check that req_update shows refs, even if all refs are packed. Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-19testsuite for cvs co -cLibravatar Fabian Emmes1-0/+11
Check that all branches are displayed. Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de> Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-8/+8
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-27cvsserver: Add test for update -pLibravatar Damien Diederen1-0/+18
Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-27cvsserver: Add a few tests for 'status' commandLibravatar Damien Diederen1-0/+32
Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13remove use of "tail -n 1" and "tail -1"Libravatar Jeff King1-10/+10
The "-n" syntax is not supported by System V versions of tail (which prefer "tail -1"). Unfortunately "tail -1" is not actually POSIX. We had some of both forms in our scripts. Since neither form works everywhere, this patch replaces both with the equivalent sed invocation: sed -ne '$p' Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13grep portability fix: don't use "-e" or "-q"Libravatar Jeff King1-13/+13
System V versions of grep (such as Solaris /usr/bin/grep) don't understand either of these options. git's usage of "grep -e pattern" fell into one of two categories: 1. equivalent to "grep pattern". -e is only useful here if the pattern begins with a "-", but all of the patterns are hardcoded and do not begin with a dash. 2. stripping comments and blank lines with grep -v -e "^$" -e "^#" We can fortunately do this in the affirmative as grep '^[^#]' Uses of "-q" can be replaced with redirection to /dev/null. In many tests, however, "grep -q" is used as "if this string is in the expected output, we are OK". In this case, it is fine to just remove the "-q" entirely; it simply makes the "verbose" mode of the test slightly more verbose. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-12/+18
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-26cvsserver: Fix for histories with multiple rootsLibravatar Steffen Prohaska1-1/+9
Git histories may have multiple roots, which can cause git merge-base to fail and this caused git cvsserver to die. This commit teaches git cvsserver to handle a failing git merge-base gracefully, and modifies the test case to verify this. All the test cases now use a history with two roots. Signed-off-by: Steffen Prohaska <prohaska@zib.de> git-cvsserver.perl | 9 ++++++++- t/t9400-git-cvsserver-server.sh | 10 +++++++++- 2 files changed, 17 insertions(+), 2 deletions(-) Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-26t9400-git-cvsserver-server: Wrap setup into test caseLibravatar Steffen Prohaska1-3/+4
It is preferable to have the test setup in a test case. The setup itself may fail and having it as a test case handles this situation more gracefully. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-26config: add support for --bool and --int while setting valuesLibravatar Frank Lichtenheld1-2/+2
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-20cvsserver: Actually implement --export-allLibravatar Alex Riesen1-2/+2
Frank Lichtenheld, Fri, Jun 15, 2007 03:01:53 +0200: > +test_expect_failure 'req_Root failure (export-all w/o whitelist)' \ > + 'cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1 > + || false' This does not work, at least for bash in current Ubuntu: GNU bash, version 3.2.13(1)-release You have to put "||" on the previous line: Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-15cvsserver: Actually implement --export-allLibravatar Frank Lichtenheld1-0/+16
Embarrassing bug number two in my options patch. Also enforce that --export-all is only ever used together with an explicit whitelist. Otherwise people might export every git repository on the whole system without realising. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-15cvsserver: Let --base-path and pserver get along just fineLibravatar Frank Lichtenheld1-0/+1
Embarassing bug number one in my options patch. Since the code for --base-path support rewrote the cvsroot value after comparing it with a possible existing value (i.e. from pserver authentication) the check always failed. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08cvsserver: Add some useful commandline optionsLibravatar Frank Lichtenheld1-0/+28
Make git-cvsserver understand some options inspired by git-daemon, namely --base-path, --export-all, --strict-paths. Also allow the caller to specify a whitelist of allowed directories, again similar to git-daemon. While already adding option parsing also support the common --help and --version options. Rationale: While the gitcvs.enabled configuration option already offers means to limit git-cvsserver access to a repository, there are some use cases where other methods of access control prove to be more useful. E.g. if setting up a pserver for a collection of public repositories one might want limit the exported repositories to exactly the directory this collection is located whithout having to worry about other repositories that might lie around with the configuration variable set (never trust your users ;) Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08cvsserver: Make req_Root more critical of its input dataLibravatar Frank Lichtenheld1-0/+34
The path submitted with the Root request has to be absolute (cvs does it this way and it may save us some sanity checks later) If multiple roots are specified (e.g. because we use pserver authentication which will already include the root), ensure that they say all the same. Probably neither is a security risk, and neither should ever be triggered by a sane client, but when validating input data, it's better to be save than sorry. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-29cvsserver: Handle 'cvs login'Libravatar Frank Lichtenheld1-0/+29
Since this is a trivial variation of the general pserver authentication, there is really no reason not to support it. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-29t9400: Work around CVS' deficienciesLibravatar Frank Lichtenheld1-0/+2
If we are too fast with our changes, the file in the working copy might still have the same mtime as noted in the CVS/Entries. This will cause CVS to happily report to the server that the file is unmodified which can lead to data loss (and in our case test failure). CVS sucks! Work around that by sleeping for a second. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-22t9400: Add some basic pserver testsLibravatar Frank Lichtenheld1-0/+34
While we can easily test the cvs <-> git-cvsserver communication with :fork: and git-cvsserver server there are some pserver specifics we should test, too. Currently this are two tests of the pserver authentication. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-22t9400: Add some more cvs update testsLibravatar Frank Lichtenheld1-0/+69
Add some cvs update tests that include various merge situations. Also add a basic test for update -C since it fits so well in there. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-22t9400: Add test cases for config file handlingLibravatar Frank Lichtenheld1-0/+69
Add a few test cases for the config file parsing done by git-cvsserver. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-12t9400: Use the repository config and nothing else.Libravatar Junio Hamano1-8/+9
git-cvsserver has a bug in its configuration file output parser that makes it choke if the configuration has these: [diff] color = auto [diff.color] whitespace = blue reverse This needs to be fixed, but thanks to that bug, a separate bug in t9400 test script was discovered. The test discarded GIT_CONFIG instead of pointing at the proper one to be used in the exoprted repository. This allowed user's .gitconfig and (if exists) systemwide /etc/gitconfig to affect the outcome of the test, which is a big no-no. The patch fixes the problem in the test. Fixing the git-cvsserver's configuration parser is left as an exercise to motivated volunteers ;-) Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-09t9400: skip cvsserver test if Perl SQLite interface is unavailableLibravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-08cvsserver: Add test cases for git-cvsserverLibravatar Frank Lichtenheld1-0/+120
Use the :fork: access method to force cvs to call "$CVS_SERVER server" even when accessing a local repository. Add a basic test for checkout and some tests for update. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>