summaryrefslogtreecommitdiff
path: root/t/t9300-fast-import.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-01-12t9300-fast-import.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-34/+34
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-20modernize t9300: move test preparations into test_expect_successLibravatar Johannes Sixt1-1250/+1264
Our usual style these days is to execute everything inside test_expect_success. Make it so. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20modernize t9300: mark here-doc words to ignore tab indentationLibravatar Johannes Sixt1-100/+100
In the next commit, we will indent test case preparations. This will require that here-documents ignore the tab indentation. Prepare for this change by marking the here-doc words accordingly. This does not have an effect now, but will remove some noise from the git diff -b output of the next commit. The change here is entirely automated with this perl command: perl -i -lpe 's/(cat.*<<) *((EOF|(EXPECT|INPUT)_END).*$)/$1-$2 &&/' t/t9300-fast-import.sh i.e., inserts a dash between << and the EOF word (and removes blanks that our style guide abhors) and appends the && that will become necessary. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20modernize t9300: use test_when_finished for clean-upLibravatar Johannes Sixt1-20/+16
A number of clean-ups of test cases are performed outside of test_expect_success. Replace these cases by using test_when_finished. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20modernize t9300: wrap lines after &&Libravatar Johannes Sixt1-16/+32
It is customary to have each command in test snippets on its own line. Fix those instances that do not follow this guideline. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20modernize t9300: use test_must_be_emptyLibravatar Johannes Sixt1-5/+3
Instead of comparing actual output to an empty file, use test_must_be_empty. In addition to the better error message provided by the helper, allocation of an empty file during the setup sequence can be avoided. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20modernize t9300: use test_must_failLibravatar Johannes Sixt1-14/+3
One test case open-codes a test for an expected failure. Replace it by test_must_fail. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-20modernize t9300: single-quote placement and indentationLibravatar Johannes Sixt1-435/+437
Many test cases do not follow our modern style that places the single-quotes that surround the shell code snippets before and after the shell code. Make it so. Many of the lines changed in this way are indented other than by a single tab. Change them (and some additional lines) to be indented with a tab. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Jeff King <peff@peff.net>
2015-07-01fast-import: add a get-mark commandLibravatar Michael Haggerty1-0/+13
It is sometimes useful for importers to be able to read the SHA-1 corresponding to a mark that they have created via fast-import. For example, they might want to embed the SHA-1 into the commit message of a later commit. Or it might be useful for internal bookkeeping uses, or for logging. Add a "get-mark" command to "git fast-import" that allows the importer to ask for the value of a mark that has been created earlier. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: use test_must_fail instead of hand-rolled blocksLibravatar Jeff King1-5/+2
These test scripts likely predate test_must_fail, and can be made simpler by using it (in addition to making them pass --chain-lint). The case in t6036 loses some verbosity in the failure case, but it is so tied to a specific failure mode that it is not worth keeping around (and the outcome of the test is not affected at all). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix severe &&-chain breakageLibravatar Jeff King1-1/+1
These are tests which are missing a link in their &&-chain, in a location which causes a significant portion of the test to be missed (e.g., the test effectively does nothing, or consists of a long string of actions and output comparisons, and we throw away the exit code of at least one part of the string). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-05Merge branch 'jc/diff-test-updates'Libravatar Junio C Hamano1-2/+2
Test clean-up. * jc/diff-test-updates: test_ln_s_add: refresh stat info of fake symbolic links t4008: modernise style t/diff-lib: check exact object names in compare_diff_raw tests: do not borrow from COPYING and README from the real source t4010: correct expected object names t9300: correct expected object names t4008: correct stale comments
2015-02-15t9300: correct expected object namesLibravatar Junio C Hamano1-2/+2
The output the test #36 expects is bogus. There are no blob objects whose names are 36a590... or 046d037... when this test was run. It was left unnoticed only because compare_diff_raw, which only cares about the add/delete/rename/copy was used to check the result. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-15test: put tests for handling of bad ref names in one placeLibravatar Ronnie Sahlberg1-30/+0
There's no straightforward way to grep for all tests dealing with invalid refs. Put them in a single test script so it is easy to see what functionality has not been exercised with bad ref names yet. Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-29Merge branch 'sb/t9300-typofix'Libravatar Junio C Hamano1-1/+1
* sb/t9300-typofix: t9300-fast-import: fix typo in test description
2014-09-22t9300-fast-import: fix typo in test descriptionLibravatar Stefan Beller1-1/+1
Signed-off-by: Stefan Beller <stefanbeller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-19Merge branch 'js/no-test-cmp-for-binaries'Libravatar Junio C Hamano1-1/+1
* js/no-test-cmp-for-binaries: t9300: use test_cmp_bin instead of test_cmp to compare binary files
2014-09-19Merge branch 'mb/fast-import-delete-root'Libravatar Junio C Hamano1-0/+104
An attempt to remove the entire tree in the "git fast-import" input stream caused it to misbehave. * mb/fast-import-delete-root: fast-import: fix segfault in store_tree() t9300: test filedelete command
2014-09-12t9300: use test_cmp_bin instead of test_cmp to compare binary filesLibravatar Johannes Sixt1-1/+1
test_cmp is intended to produce diff output for human consumption. The input in one instance in t9300-fast-import.sh are binary files, however. Use test_cmp_bin to compare the files. This was noticed because on Windows we have a special implementation of test_cmp in pure bash code (to ignore differences due to intermittent CR in actual output), and bash runs into an infinite loop due to the binary nature of the input. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-29fast-import: fix segfault in store_tree()Libravatar Maxim Bublis1-2/+2
Branch tree is NULLified by filedelete command if we are trying to delete root tree. Add sanity check and use load_tree() in that case. Signed-off-by: Maxim Bublis <satori@yandex-team.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-29t9300: test filedelete commandLibravatar Maxim Bublis1-0/+104
Add new fast-import test series for filedelete command. Signed-off-by: Maxim Bublis <satori@yandex-team.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-21test prerequisites: eradicate NOT_FOOLibravatar Junio C Hamano1-4/+4
Support for Back when bdccd3c1 (test-lib: allow negation of prerequisites, 2012-11-14) introduced negated predicates (e.g. "!MINGW,!CYGWIN"), we already had 5 test files that use NOT_MINGW (and a few MINGW) as prerequisites. Let's not add NOT_FOO and rewrite existing ones as !FOO for both MINGW and CYGWIN. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-21fast-import: add support to delete refsLibravatar Felipe Contreras1-0/+18
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-29t: use perl instead of "$PERL_PATH" where applicableLibravatar Jeff King1-1/+1
As of the last commit, we can use "perl" instead of "$PERL_PATH" when running tests, as the former is now a function which uses the latter. As the shorter "perl" is easier on the eyes, let's switch to using it everywhere. This is not quite a mechanical s/$PERL_PATH/perl/ replacement, though. There are some places where we invoke perl from a script we generate on the fly, and those scripts do not have access to our internal shell functions. The result can be double-checked by running: ln -s /bin/false bin-wrappers/perl make test which continues to pass even after this patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-17Merge branch 'rh/ishes-doc'Libravatar Junio C Hamano1-3/+3
We liberally use "committish" and "commit-ish" (and "treeish" and "tree-ish"); as these are non-words, let's unify these terms to their dashed form. More importantly, clarify the documentation on object peeling using these terms. * rh/ishes-doc: glossary: fix and clarify the definition of 'ref' revisions.txt: fix and clarify <rev>^{<type>} glossary: more precise definition of tree-ish (a.k.a. treeish) use 'commit-ish' instead of 'committish' use 'tree-ish' instead of 'treeish' glossary: define commit-ish (a.k.a. committish) glossary: mention 'treeish' as an alternative to 'tree-ish'
2013-09-04use 'commit-ish' instead of 'committish'Libravatar Richard Hansen1-3/+3
Replace 'committish' in documentation and comments with 'commit-ish' to match gitglossary(7) and to be consistent with 'tree-ish'. The only remaining instances of 'committish' are: * variable, function, and macro names * "(also committish)" in the definition of commit-ish in gitglossary[7] Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-23fast-import: allow moving the root treeLibravatar John Keeping1-1/+1
Because fast-import.c::tree_content_remove does not check for the empty path, it is not possible to move the root tree to a subdirectory. Instead the error "Path not in branch" is produced (note the double space where the empty path has been inserted). Fix this by explicitly checking for the empty path and handling it. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-23fast-import: allow ls or filecopy of the root treeLibravatar John Keeping1-2/+2
Commit 178e1de (fast-import: don't allow 'ls' of path with empty components, 2012-03-09) restricted paths which: . contain an empty directory component (e.g. foo//bar is invalid), . end with a directory separator (e.g. foo/ is invalid), . start with a directory separator (e.g. /foo is invalid). However, the implementation also caught the empty path, which should represent the root tree. Relax this restriction so that the empty path is explicitly allowed and refers to the root tree. Reported-by: Dave Abrahams <dave@boostpro.com> Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-23t9300: document fast-import empty path issuesLibravatar John Keeping1-0/+65
When given an empty path, fast-import sometimes reports "missing" instead of using the root tree object. On top of this, for "ls" and file copy (but not move) it dies with "Empty path component found in input". Document this behaviour with failing test cases. Reported-by: Dave Abrahams <dave@boostpro.com> Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-11t: make PIPE a standard test prerequisiteLibravatar Adam Spiers1-8/+0
The 'PIPE' test prerequisite was already defined identically by t9010 and t9300, therefore it makes sense to make it a predefined prerequisite. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-09Merge branch 'vr/use-our-perl-in-tests'Libravatar Junio C Hamano1-1/+1
Some implementations of Perl terminates "lines" with CRLF even when the script is operating on just a sequence of bytes. Make sure to use "$PERL_PATH", the version of Perl the user told Git to use, in our tests to avoid unnecessary breakages in tests. * vr/use-our-perl-in-tests: t/README: add a bit more Don'ts tests: enclose $PERL_PATH in double quotes t/test-lib.sh: export PERL_PATH for use in scripts t: Replace 'perl' by $PERL_PATH
2012-06-24tests: enclose $PERL_PATH in double quotesLibravatar Junio C Hamano1-1/+1
Otherwise it will be split at a space after "Program" when it is set to "\\Program Files\perl" or something silly like that. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-22Documentation: Fix misspellingsLibravatar Leila Muhtasib1-1/+1
Signed-off-by: Leila Muhtasib <muhtasib@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-12t: Replace 'perl' by $PERL_PATHLibravatar Vincent van Ravesteijn1-1/+1
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a few tests already actually use this variable when perl is needed. The other test just call 'perl' and it might happen that the wrong perl interpreter is used. This becomes problematic on Windows, when the perl interpreter that is compiled and installed on the Windows system is used, because this perl interpreter might introduce some unexpected LF->CRLF conversions. This patch makes sure that $PERL_PATH is used everywhere in the test suite and that the correct perl interpreter is used. Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-20Consistently use "superproject" instead of "supermodule"Libravatar Jens Lehmann1-1/+1
We fairly consistently say "superproject" and never "supermodule" these days. But there are seven occurrences of "supermodule" left in the current work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in test names and one in a C-code comment. Replace all occurrences of "supermodule" outside of the Release Notes (which shouldn't be changed after the fact) with "superproject" for consistency. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-11Merge branch 'js/fast-import-test-9300' into maintLibravatar Junio C Hamano1-34/+54
By Johannes Sixt * js/fast-import-test-9300: t9300-fast-import: avoid 'exit' in test_expect_success snippets
2012-04-20t9300-fast-import: avoid 'exit' in test_expect_success snippetsLibravatar Johannes Sixt1-34/+54
Exiting from a for-loop early using '|| break' does not propagate the failure code, and for this reason, the tests used just 'exit'. But this ends the test script with 'FATAL: Unexpected exit code 1' in the case of a failed test. Fix this by moving the loop into a shell function, from which we can simply return early. While at it, modernize the style of the affected test cases. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-10fast-import: tighten parsing of datarefsLibravatar Pete Wyckoff1-0/+287
The syntax for the use of mark references in fast-import demands either a SP (space) or LF (end-of-line) after a mark reference. Fast-import does not complain when garbage appears after a mark reference in some cases. Factor out parsing of mark references and complain if errant characters are found. Also be a little more careful when parsing "inline" and SHA1s, complaining if extra characters appear or if the form of the dataref is unrecognized. Buggy input can cause fast-import to produce the wrong output, silently, without error. This makes it difficult to track down buggy generators of fast-import streams. An example is seen in the last line of this commit command: commit refs/heads/S2 committer Name <name@example.com> 1112912893 -0400 data <<COMMIT commit message COMMIT from :1M 100644 :103 hello.c It is missing a newline and should be: [...] from :1 M 100644 :103 hello.c What fast-import does is to produce a commit with the same contents for hello.c as in refs/heads/S2^. What the buggy program was expecting was the contents of blob :103. While the resulting commit graph looked correct, the contents in some commits were wrong. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-26Merge branch 'jn/maint-fast-import-empty-ls' into maintLibravatar Junio C Hamano1-0/+39
* jn/maint-fast-import-empty-ls: fast-import: don't allow 'ls' of path with empty components fast-import: leakfix for 'ls' of dirty trees
2012-03-16Merge "two fixes for fast-import's 'ls' command" from JonathanLibravatar Junio C Hamano1-0/+39
Andrew Sayers noticed that the svn-fe | git fast-import pipeline mishandles a subversion history that copies the root directory to a sub-directory (e.g. doing `svn cp . trunk` to standardise your layout). As David Barr explained, the bug arises when the following command is sent to git fast-import: 'ls' SP ':1' SP LF Instead of reading back what is at the root of r1, it unconditionally reports the path as missing. After sleeping on it, here are two patches for 'maint'. One plugs a memory leak. The other ensures that trying to pass an empty path to the 'ls' command results in an error message that can help the frontend author instead of the silently broken conversion Andrew found. Then we can carefully add 'ls ""' support in 1.7.11. * commit 'refs/pull-request-tags/jn/maint-fast-import-empty-ls': fast-import: don't allow 'ls' of path with empty components fast-import: leakfix for 'ls' of dirty trees
2012-03-09fast-import: don't allow 'ls' of path with empty componentsLibravatar Jonathan Nieder1-0/+39
As the fast-import manual explains: The value of <path> must be in canonical form. That is it must not: . contain an empty directory component (e.g. foo//bar is invalid), . end with a directory separator (e.g. foo/ is invalid), . start with a directory separator (e.g. /foo is invalid), Unfortunately the "ls" command accepts these invalid syntaxes and responds by declaring that the indicated path is missing. This is too subtle and causes importers to silently misbehave; better to error out so the operator knows what's happening. The C, R, and M commands already error out for such paths. Reported-by: Andrew Sayers <andrew-git@pileofstuff.org> Analysis-by: David Barr <davidbarr@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2011-10-14t9300: do not run --cat-blob-fd related tests on MinGWLibravatar Johannes Schindelin1-4/+4
As diagnosed by Johannes Sixt, msys.dll does not hand through file descriptors > 2 to child processes, so these test cases cannot passes when run through an MSys bash. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22fast-import: don't allow to note on empty branchLibravatar Dmitry Ivankov1-0/+17
'reset' command makes fast-import start a branch from scratch. It's name is kept in lookup table but it's sha1 is null_sha1 (special value). 'notemodify' command can be used to add a note on branch head given it's name. lookup_branch() is used it that case and it doesn't check for null_sha1. So fast-import writes a note for null_sha1 object instead of giving a error. Add a check to deny adding a note on empty branch and add a corresponding test. Signed-off-by: Dmitry Ivankov <divanorama@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22fast-import: don't allow to tag empty branchLibravatar Dmitry Ivankov1-0/+12
'reset' command makes fast-import start a branch from scratch. It's name is kept in lookup table but it's sha1 is null_sha1 (special value). 'tag' command can be used to tag a branch by it's name. lookup_branch() is used it that case and it doesn't check for null_sha1. So fast-import writes a tag for null_sha1 object instead of giving a error. Add a check to deny tagging an empty branch and add a corresponding test. Signed-off-by: Dmitry Ivankov <divanorama@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Merge branch 'di/fast-import-tagging'Libravatar Junio C Hamano1-0/+67
* di/fast-import-tagging: fast-import: allow to tag newly created objects fast-import: add tests for tagging blobs
2011-08-28Merge branch 'di/fast-import-deltified-tree'Libravatar Junio C Hamano1-0/+41
* di/fast-import-deltified-tree: fast-import: prevent producing bad delta fast-import: add a test for tree delta base corruption
2011-08-28Merge branch 'di/fast-import-ident'Libravatar Junio C Hamano1-0/+99
* di/fast-import-ident: fsck: improve committer/author check fsck: add a few committer name tests fast-import: check committer name more strictly fast-import: don't fail on omitted committer name fast-import: add input format tests
2011-08-25Merge branch 'di/fast-import-doc'Libravatar Junio C Hamano1-0/+47
* di/fast-import-doc: doc/fast-import: document feature import-marks-if-exists
2011-08-23fast-import: allow to tag newly created objectsLibravatar Dmitry Ivankov1-0/+26
fast-import allows to tag objects by sha1 and to query sha1 of objects being imported. So it should allow to tag these objects, make it do so. Signed-off-by: Dmitry Ivankov <divanorama@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>