| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. In addition, use cut to filter out the object
IDs and verify only the information that we're really interested in.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some repositories in the wild have commits that record nonsense
committer timezone (e.g. rails.git); "git fast-import" learned an
option to pass these nonsense timestamps intact to allow recreating
existing repositories as-is.
* en/fast-import-looser-date:
fast-import: add new --date-format=raw-permissive format
|
|
There are multiple repositories in the wild with random, invalid
timezones. Most notably is a commit from rails.git with a timezone of
"+051800"[1]. A few searches will find other repos with that same
invalid timezone as well. Further, Peff reports that GitHub relaxed
their fsck checks in August 2011 to accept any timezone value[2], and
there have been multiple reports to filter-repo about fast-import
crashing while trying to import their existing repositories since they
had timezone values such as "-7349423" and "-43455309"[3].
The existing check on timezone values inside fast-import may prove
useful for people who are crafting fast-import input by hand or with a
new script. For them, the check may help them avoid accidentally
recording invalid dates. (Note that this check is rather simplistic and
there are still several forms of invalid dates that fast-import does not
check for: dates in the future, timezone values with minutes that are
not divisible by 15, and timezone values with minutes that are 60 or
greater.) While this simple check may have some value for those users,
other users or tools will want to import existing repositories as-is.
Provide a --date-format=raw-permissive format that will not error out on
these otherwise invalid timezones so that such existing repositories can
be imported.
[1] https://github.com/rails/rails/commit/4cf94979c9f4d6683c9338d694d5eb3106a4e734
[2] https://lore.kernel.org/git/20200521195513.GA1542632@coredump.intra.peff.net/
[3] https://github.com/newren/git-filter-repo/issues/88
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 transition continues.
* bc/sha-256-part-1-of-4: (22 commits)
fast-import: add options for rewriting submodules
fast-import: add a generic function to iterate over marks
fast-import: make find_marks work on any mark set
fast-import: add helper function for inserting mark object entries
fast-import: permit reading multiple marks files
commit: use expected signature header for SHA-256
worktree: allow repository version 1
init-db: move writing repo version into a function
builtin/init-db: add environment variable for new repo hash
builtin/init-db: allow specifying hash algorithm on command line
setup: allow check_repository_format to read repository format
t/helper: make repository tests hash independent
t/helper: initialize repository if necessary
t/helper/test-dump-split-index: initialize git repository
t6300: make hash algorithm independent
t6300: abstract away SHA-1-specific constants
t: use hash-specific lookup tables to define test constants
repository: require a build flag to use SHA-256
hex: add functions to parse hex object IDs in any algorithm
hex: introduce parsing variants taking hash algorithms
...
|
|
When converting a repository using submodules from one hash algorithm to
another, it is necessary to rewrite the submodules from the old
algorithm to the new algorithm, since only references to submodules, not
their contents, are written to the fast-export stream. Without rewriting
the submodules, fast-import fails with an "Invalid dataref" error when
encountering a submodule in another algorithm.
Add a pair of options, --rewrite-submodules-from and
--rewrite-submodules-to, that take a list of marks produced by
fast-export and fast-import, respectively, when processing the
submodule. Use these marks to map the submodule commits from the old
algorithm to the new algorithm.
We read marks into two corresponding struct mark_set objects and then
perform a mapping from the old to the new using a hash table. This lets
us reuse the same mark parsing code that is used elsewhere and allows us
to efficiently read and match marks based on their ID, since mark files
need not be sorted.
Note that because we're using a khash table for the object IDs, and this
table copies values of struct object_id instead of taking references to
them, it's necessary to zero the struct object_id values that we use to
insert and look up in the table. Otherwise, we would end up with SHA-1
values that don't match because of whatever stack garbage might be left
in the unused area.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test on "fast-import" used to get stuck when "fast-import" died
in the middle.
* sg/t9300-robustify:
t9300-fast-import: don't hang if background fast-import exits too early
t9300-fast-import: store the PID in a variable instead of pidfile
|
|
|
|
The five tests checking 'git fast-import's checkpoint handling in
't9300-fast-import.sh', all with the prefix "V:" in their test
description, can hang indefinitely if 'git fast-import' unexpectedly
dies early in any of these tests.
These five tests run 'git fast-import' in the background, while
feeding instructions to its standard input through a fifo (fd 8) from
a background subshell, and reading and verifying its standard output
through another fifo (fd 9) in the test script's main shell process.
This "reading and verifying" is basically a 'while read ...' shell
loop iterating until 'git fast-import' outputs the expected line,
ignoring any other output. This doesn't work very well when 'git
fast-import' dies before printing that particular line, because the
'read' builtin doesn't get EOF after the death of 'git fast-import',
as their input and output are not connected directly but through a
fifo. Consequently, that 'read' hangs waiting for the next line from
the already dead 'git fast-import', leaving the test script and in
turn the whole test suite hanging.
Avoid this hang by checking whether the background 'git fast-import'
process exited unexpectedly early, and interrupt the 'while read' loop
if it did. We have to jump through some hoops to achive that, though:
- Start the background 'git fast-import' in another background
subshell, which then:
- prints the PID of that 'git fast-import' process to the fifo,
to be read by the main shell process, so it will know which
process to kill when the test is finished.
- waits until that 'git fast-import' process exits. If it does
exit, then report its exit code, and write a message to the
fifo used for 'git fast-import's standard output, thus
un-block the 'read' builtin in the main shell process.
- Modify that 'while read' loop to break the loop upon seeing that
message, and fail the test in the usual way.
- Once the test is finished kill that background subshell as well,
and do so before killing the background 'git fast-import'.
Otherwise the background 'git fast-import' and subshell processes
would die racily, and if 'git fast-import' were to die sooner,
then we might get some undesired and potentially confusing
messages in the test's output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The five tests running 'git fast-import' in the background in
't9300-fast-import.sh' store the PID of that background process in a
pidfile, to be used to check whether that background process survived
each test and then to kill it in test_when_finished commands. To
achieve this all these five tests run three $(cat <pidfile>) command
substitutions each.
Store the PID of the background 'git fast-import' in a variable to
avoid those extra processes.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
|
|
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
|
|
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
|
|
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
|
|
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
|
|
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
|
|
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
|
|
As with export-marks in the previous commit, import-marks can access the
filesystem. This is significantly less dangerous than export-marks
because it only involves reading from arbitrary paths, rather than
writing them. However, it could still be surprising and have security
implications (e.g., exfiltrating data from a service that accepts
fast-import streams).
Let's lump it (and its "if-exists" counterpart) in with export-marks,
and enable the in-stream version only if --allow-unsafe-features is set.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
This fixes CVE-2019-1348.
Signed-off-by: Jeff King <peff@peff.net>
|
|
When we parse the --export-marks option, we don't immediately open the
file, but we do create any leading directories. This can be especially
confusing when a command-line option overrides an in-stream one, in
which case we'd create the leading directory for the in-stream file,
even though we never actually write the file.
Let's instead create the directories just before opening the file, which
means we'll create only useful directories. Note that this could change
the handling of relative paths if we chdir() in between, but we don't
actually do so; the only permanent chdir is from setup_git_directory()
which runs before either code path (potentially we should take the
pre-setup dir into account to avoid surprising the user, but that's an
orthogonal change).
The test just adapts the existing "override" test to use paths with
leading directories. This checks both that the correct directory is
created (which worked before but was not tested), and that the
overridden one is not (our new fix here).
While we're here, let's also check the error result of
safe_create_leading_directories(). We'd presumably notice any failure
immediately after when we try to open the file itself, but we can give a
more specific error message in this case.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Our tests confirm that providing two "import-marks" options in a
fast-import stream is an error. However, the invoked command would fail
even without covering this case, because the marks files themselves do
not actually exist. Let's create the files to make sure we fail for the
right reason (we actually do, because the option parsing happens before
we open anything, but this future-proofs our test).
Signed-off-by: Jeff King <peff@peff.net>
|
|
These waste a process, and make the line longer than it needs to be.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The file "frontend" became unused with 4de0bbd898 (t9300: use perl
"head -c" clone in place of "dd bs=1 count=16000" kluge, 2010-12-13);
get rid of it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to fast-import/export.
* en/fast-imexport-nested-tags:
fast-export: handle nested tags
t9350: add tests for tags of things other than a commit
fast-export: allow user to request tags be marked with --mark-tags
fast-export: add support for --import-marks-if-exists
fast-import: add support for new 'alias' command
fast-import: allow tags to be identified by mark labels
fast-import: fix handling of deleted tags
fast-export: fix exporting a tag and nothing else
|
|
Some tests print a file before searching for a pattern using
test_i18ngrep. This is useful when debugging tests with --verbose when
the pattern is not found as expected.
Since 63b1a175ee (t: make 'test_i18ngrep' more informative on failure,
2018-02-08) test_i18ngrep already shows the contents of a file that
doesn't match the expected pattern, though.
So don't bother doing the same unconditionally up-front. The contents
are not interesting if the expected pattern is found, and showing it
twice if it doesn't match is of no use.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-export and fast-import have nice --import-marks flags which allow
for incremental migrations. However, if there is a mark in
fast-export's file of marks without a corresponding mark in the one for
fast-import, then we run the risk that fast-export tries to send new
objects relative to the mark it knows which fast-import does not,
causing fast-import to fail.
This arises in practice when there is a filter of some sort running
between the fast-export and fast-import processes which prunes some
commits programmatically. Provide such a filter with the ability to
alias pruned commits to their most recent non-pruned ancestor.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark identifiers are used in fast-export and fast-import to provide a
label to refer to earlier content. Blobs are given labels because they
need to be referenced in the commits where they first appear with a
given filename, and commits are given labels because they can be the
parents of other commits. Tags were never given labels, probably
because they were viewed as unnecessary, but that presents two problems:
1. It leaves us without a way of referring to previous tags if we
want to create a tag of a tag (or higher nestings).
2. It leaves us with no way of recording that a tag has already been
imported when using --export-marks and --import-marks.
Fix these problems by allowing an optional mark label for tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If our input stream includes a tag which is later deleted, we were not
properly deleting it. We did have a step which would delete it, but we
left a tag in the tag list noting that it needed to be updated, and the
updating of annotated tags occurred AFTER ref deletion. So, when we
record that a tag needs to be deleted, also remove it from the list of
annotated tags to update.
While this has likely been something that has not happened in practice,
it will come up more in order to support nested tags. For nested tags,
we either need to give temporary names to the intermediate tags and then
delete them, or else we need to use the final name for the intermediate
tags. If we use the final name for the intermediate tags, then in order
to keep the sanity check that someone doesn't try to update the same tag
twice, we need to delete the ref after creating the intermediate tag.
So, either way nested tags imply the need to delete temporary inner tag
references.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git supports commit messages with an encoding other than UTF-8,
allow fast-import to import such commits. This may be useful for folks
who do not want to reencode commit messages from an external system, and
may also be useful to achieve reversible history rewrites (e.g. sha1sum
<-> sha256sum transitions or subtree work) with git repositories that
have used specialized encodings in their commit history.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When get-mark was introduced in commit 28c7b1f7b7b7 ("fast-import: add a
get-mark command", 2015-07-01), it followed the precedent of the
cat-blob command to be allowed on any line other than in the middle of a
data directive; see commit 777f80d7429b ("fast-import: Allow cat-blob
requests at arbitrary points in stream", 2010-11-28). It was useful to
allow cat-blob directives in the middle of a commit to get more data
that would be used in writing the current commit object. get-mark is
not similarly useful since fast-import can already use either object id
or mark. Further, trying to allow this command anywhere caused parsing
bugs. Fix the parsing problems by only allowing get-mark commands to
appear when other commands have completed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The multi-pack-index feature is tested in isolation by
t5319-multi-pack-index.sh, but there are many more interesting
scenarios in the test suite surrounding pack-file data shapes
and interactions. Since the multi-pack-index is an optional
data structure, it does not make sense to include it by default
in those tests.
Instead, add a new GIT_TEST_MULTI_PACK_INDEX environment variable
that enables core.multiPackIndex and writes a multi-pack-index
after each 'git repack' command. This adds extra test coverage
when needed.
There are a few spots in the test suite that need to react to this
change:
* t5319-multi-pack-index.sh: there is a test that checks that
'git repack' deletes the multi-pack-index. Disable the environment
variable to ensure this still happens.
* t5310-pack-bitmaps.sh: One test moves a pack-file from the object
directory to an alternate. This breaks the multi-pack-index, so
delete the multi-pack-index at this point, if it exists.
* t9300-fast-import.sh: One test verifies the number of files in
the .git/objects/pack directory is exactly 8. Exclude the
multi-pack-index from this count so it is still 8 in all cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test updates.
* ab/test-must-be-empty-for-master:
tests: make use of the test_must_be_empty function
|
|
Test update.
* sg/fast-import-dump-refs-on-checkpoint-fix:
t9300: wait for background fast-import process to die after killing it
|
|
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The five new tests added to 't9300-fast-import.sh' in 30e215a65c
(fast-import: checkpoint: dump branches/tags/marks even if
object_count==0, 2017-09-28), all with the prefix "V:" in their test
description, run 'git fast-import' in the background and then 'kill'
it as part of a 'test_when_finished' cleanup command. When this test
script is executed with Bash, some or even all of these tests tend to
pollute the test script's stderr, and messages about terminated
processes end up on the terminal:
$ bash ./t9300-fast-import.sh
<... snip ...>
ok 179 - V: checkpoint helper does not get stuck with extra output
/<...>/test-lib-functions.sh: line 388: 28383 Terminated git fast-import $options 0<&8 1>&9
ok 180 - V: checkpoint updates refs after reset
./t9300-fast-import.sh: line 3210: 28401 Terminated git fast-import $options 0<&8 1>&9
ok 181 - V: checkpoint updates refs and marks after commit
ok 182 - V: checkpoint updates refs and marks after commit (no new objects)
./test-lib.sh: line 634: line 3250: 28485 Terminated git fast-import $options 0<&8 1>&9
ok 183 - V: checkpoint updates tags after tag
./t9300-fast-import.sh: line 3264: 28510 Terminated git fast-import $options 0<&8 1>&9
After a background child process terminates, its parent Bash process
always outputs a message like those above to stderr, even when in
non-interactive mode.
But how do some of these messages end up on the test script's stderr,
why don't we get them from all five tests, and why do they come from
different file/line locations? Well, after sending the TERM signal to
the background child process, it takes a little while until that
process receives the signal and terminates, and then it takes another
while until the parent process notices it. During this time the
parent Bash process is continuing execution, and by the time it
notices that its child terminated it might have already left
'test_eval_inner_' and its stderr is not redirected to /dev/null
anymore. That's why such a message can appear on the test script's
stderr, while other times, when the child terminates fast and/or the
parent shell is slow enough, the message ends up in /dev/null, just
like any other output of the test does. Bash always adds the file
name and line number of the code location it was about to execute when
it notices the termination of its child process as a prefix to that
message, hence the varying and sometimes totally unrelated location
prefixes in those messages (e.g. line 388 in 'test-lib-functions.sh'
is 'test_verify_prereq', and I saw such a message pointing to
'say_color' as well).
Prevent these messages from appearing on the test script's stderr by
'wait'-ing on the pid of the background 'git fast-import' process
after sending it the TERM signal. This ensures that the executing
shell's stderr is still redirected when the shell notices the
termination of its child process in the background, and that these
messages get a consistent file/line location prefix.
Note that this is not an issue when the test script is run with Bash
and '-v', because then these messages are supposed to go to the test
script's stderr anyway, and indeed all of them do; though the
sometimes seemingly random file/line prefixes could be confusing
still. Similarly, it's not an issue with Bash and '--verbose-log'
either, because then all messages go to the log file as they should.
Finally, it's not an issue with some other shells (I tried dash, ksh,
ksh93 and mksh) even without any of the verbose options, because they
don't print messages like these in non-interactive mode in the first
place.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_x40/$OID_REGEX/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a helper print_sha1_ellipsis() that pays attention to the
GIT_PRINT_SHA1_ELLIPSIS environment variable, and prepare the tests to
unconditionally set it for the test pieces that will be broken once the code
stops showing the extra dots by default.
The removal of these dots is merely a plan at this step and has not happened
yet but soon will.
Document GIT_PRINT_SHA1_ELLIPSIS.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The checkpoint command cycles packfiles if object_count != 0, a sensible
test or there would be no pack files to write. Since 820b931012, the
command also dumps branches, tags and marks, but still conditionally.
However, it is possible for a command stream to modify refs or create
marks without creating any new objects.
For example, reset a branch (and keep fast-import running):
$ git fast-import
reset refs/heads/master
from refs/heads/master^
checkpoint
but refs/heads/master remains unchanged.
Other example: a commit command that re-creates an object that already
exists in the object database.
The man page also states that checkpoint "updates the refs" and that
"placing a progress command immediately after a checkpoint will inform
the reader when the checkpoint has been completed and it can safely
access the refs that fast-import updated". This wasn't always true
without this patch.
This fix unconditionally calls dump_{branches,tags,marks}() for all
checkpoint commands. dump_branches() and dump_tags() are cheap to call
in the case of a no-op.
Add tests to t9300 that observe the (non-packfiles) effects of
checkpoint.
Signed-off-by: Eric Rannaud <e@nanocritical.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git archive" learned to handle files that are larger than 8GB and
commits far in the future than expressible by the traditional US-TAR
format.
* jk/big-and-future-archive-tar:
archive-tar: drop return value
archive-tar: write extended headers for far-future mtime
archive-tar: write extended headers for file sizes >= 8GB
t5000: test tar files that overflow ustar headers
t9300: factor out portable "head -c" replacement
|
|
It is sometimes useful to be able to read exactly N bytes from a
pipe. Doing this portably turns out to be surprisingly difficult
in shell scripts.
We want a solution that:
- is portable
- never reads more than N bytes due to buffering (which
would mean those bytes are not available to the next
program to read from the same pipe)
- handles partial reads by looping until N bytes are read
(or we see EOF)
- is resilient to stray signals giving us EINTR while
trying to read (even though we don't send them, things
like SIGWINCH could cause apparently-random failures)
Some possible solutions are:
- "head -c" is not portable, and implementations may
buffer (though GNU head does not)
- "read -N" is a bash-ism, and thus not portable
- "dd bs=$n count=1" does not handle partial reads. GNU dd
has iflags=fullblock, but that is not portable
- "dd bs=1 count=$n" fixes the partial read problem (all
reads are 1-byte, so there can be no partial response).
It does make a lot of write() calls, but for our tests
that's unlikely to matter. It's fairly portable. We
already use it in our tests, and it's unlikely that
implementations would screw up any of our criteria. The
most unknown one would be signal handling.
- perl can do a sysread() loop pretty easily. On my Linux
system, at least, it seems to restart the read() call
automatically. If that turns out not to be portable,
though, it would be easy for us to handle it.
That makes the perl solution the least bad (because we
conveniently omitted "length of code" as a criterion).
It's also what t9300 is currently using, so we can just pull
the implementation from there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
|
|
Certain lines of the marks file might be corrupted (or the objects
missing due to a garbage collection), but that's no reason to truncate
the file and essentially destroy the rest of it.
Ideally missing objects should not cause a crash, we could just skip
them, but that's another patch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
strbuf_getwholeline() did not NUL-terminate the buffer on certain
corner cases in its error codepath.
* jk/getwholeline-getdelim-empty:
strbuf_getwholeline: NUL-terminate getdelim buffer on error
|
|
Commit 0cc30e0 (strbuf_getwholeline: use getdelim if it is
available, 2015-04-16) tries to clean up after getdelim()
returns EOF, but gets one case wrong, which can lead in some
obscure cases to us reading uninitialized memory.
After getdelim() returns -1, we re-initialize the strbuf
only if sb->buf is NULL. The thinking was that either:
1. We fed an existing allocated buffer to getdelim(), and
at most it would have realloc'd, leaving our NUL in
place.
2. We didn't have a buffer to feed, so we gave getdelim()
NULL; sb->buf will remain NULL, and we just want to
restore the empty slopbuf.
But that second case isn't quite right. getdelim() may
allocate a buffer, write nothing into it, and then return
EOF. The resulting strbuf rightfully has sb->len set to "0",
but is missing the NUL terminator in the first byte.
Most call-sites are fine with this. They see the EOF and
don't bother looking at the strbuf. Or they notice that
sb->len is empty, and don't look at the contents. But
there's at least one case that does neither, and relies on
parsing the resulting (possibly zero-length) string:
fast-import. You can see this in action with the new test
(though we probably only notice failure there when run with
--valgrind or ASAN).
We can fix this by unconditionally resetting the strbuf when
we have a buffer after getdelim(). That fixes case 2 above.
Case 1 is probably already fine in practice, but it does not
hurt for us to re-assert our invariants (especially because
we are relying on whatever getdelim() happens to do, which
may vary from platform to platform). Our fix covers that
case, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
brian m. carlson
Junio C Hamano
Elijah Newren
Martin Ågren
SZEDER Gábor
Jeff King
René Scharfe
Derrick Stolee
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Ann T Ropea
Eric Rannaud
Ville Skyttä
Felipe Contreras
Eric Wong