| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jn/maint-fast-import-empty-ls:
fast-import: don't allow 'ls' of path with empty components
fast-import: leakfix for 'ls' of dirty trees
|
|
As the fast-import manual explains:
The value of <path> must be in canonical form. That is it must
not:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid),
Unfortunately the "ls" command accepts these invalid syntaxes and
responds by declaring that the indicated path is missing. This is too
subtle and causes importers to silently misbehave; better to error out
so the operator knows what's happening.
The C, R, and M commands already error out for such paths.
Reported-by: Andrew Sayers <andrew-git@pileofstuff.org>
Analysis-by: David Barr <davidbarr@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
As diagnosed by Johannes Sixt, msys.dll does not hand through file
descriptors > 2 to child processes, so these test cases cannot passes when
run through an MSys bash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'reset' command makes fast-import start a branch from scratch. It's name
is kept in lookup table but it's sha1 is null_sha1 (special value).
'notemodify' command can be used to add a note on branch head given it's
name. lookup_branch() is used it that case and it doesn't check for
null_sha1. So fast-import writes a note for null_sha1 object instead of
giving a error.
Add a check to deny adding a note on empty branch and add a corresponding
test.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'reset' command makes fast-import start a branch from scratch. It's name
is kept in lookup table but it's sha1 is null_sha1 (special value).
'tag' command can be used to tag a branch by it's name. lookup_branch()
is used it that case and it doesn't check for null_sha1. So fast-import
writes a tag for null_sha1 object instead of giving a error.
Add a check to deny tagging an empty branch and add a corresponding test.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* di/fast-import-tagging:
fast-import: allow to tag newly created objects
fast-import: add tests for tagging blobs
|
|
* di/fast-import-deltified-tree:
fast-import: prevent producing bad delta
fast-import: add a test for tree delta base corruption
|
|
* di/fast-import-ident:
fsck: improve committer/author check
fsck: add a few committer name tests
fast-import: check committer name more strictly
fast-import: don't fail on omitted committer name
fast-import: add input format tests
|
|
* di/fast-import-doc:
doc/fast-import: document feature import-marks-if-exists
|
|
fast-import allows to tag objects by sha1 and to query sha1 of objects
being imported. So it should allow to tag these objects, make it do so.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-import allows to create an annotated tag that annotates a blob,
via mark or direct sha1 specification.
For mark it works, for sha1 it tries to read the object. It tries to
do so via read_sha1_file, and then checks the size to be at least 46.
That's weird, let's just allow to (annotated) tag any object referenced
by sha1. If the object originates from our packfile, we still fail though.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-import command-line option --import-marks-if-exists was introduced
in commit dded4f1 (fast-import: Introduce --import-marks-if-exists, 2011-01-15)
--import-marks option can be set via a "feature" command in a fast-import
stream and --import-marks-if-exists had support for such specification
from the very beginning too due to some shared codebase. Though the
documentation for this feature wasn't written in dded4f1.
Add the documentation for "feature import-marks-if-exists=<file>". Also add
a minimalistic test for it.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To produce deltas for tree objects fast-import tracks two versions
of tree's entries - base and current one. Base version stands both
for a delta base of this tree, and for a entry inside a delta base
of a parent tree. So care should be taken to keep it in sync.
tree_content_set cuts away a whole subtree and replaces it with a
new one (or NULL for lazy load of a tree with known sha1). It
keeps a base sha1 for this subtree (needed for parent tree). And
here is the problem, 'subtree' tree root doesn't have the implied
base version entries.
Adjusting the subtree to include them would mean a deep rewrite of
subtree. Invalidating the subtree base version would mean recursive
invalidation of parents' base versions. So just mark this tree as
do-not-delta me. Abuse setuid bit for this purpose.
tree_content_replace is the same as tree_content_set except that is
is used to replace the root, so just clearing base sha1 here (instead
of setting the bit) is fine.
[di: log message]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-import is able to write imported tree objects in delta format.
It holds a tree structure in memory where each tree entry may have
a delta base sha1 assigned. When delta base data is needed it is
reconstructed from this in-memory structure. Though sometimes the
delta base data doesn't match the delta base sha1 so wrong or even
corrupt pack is produced.
Add a small test that produces a corrupt pack. It uses just tree
copy and file modification commands aside from the very basic commit
and blob commands.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation declares following identity format:
(<name> SP)? LT <email> GT
where name is any string without LF and LT characters.
But fast-import just accepts any string up to first GT
instead of checking the whole format, and moreover just
writes it as is to the commit object.
git-fsck checks for [^<\n]* <[^<>\n]*> format. Note that the
space is mandatory. And the space quirk is already handled via
extending the string to the left when needed.
Modify fast-import input identity format to a slightly stricter
one - deny LF, LT and GT in both <name> and <email>. And check
for it.
This is stricter then git-fsck as fsck accepts "Name> <email>"
currently, but soon fsck check will be adjusted likewise.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-import format declares 'committer_name SP' to be optional in
'committer_name SP LT email GT'. But for a (commit) object SP is
obligatory while zero length committer_name is ok. git-fsck checks
that SP is present, so fast-import must prepend it if the name SP
part is omitted. It doesn't do so and thus for "LT email GT" ident
it writes a bad object.
Name cannot contain LT or GT, ident always comes after SP in fast-import.
So if ident starts with LT reuse the SP as if a valid 'SP LT email GT'
ident was passed.
This fixes a ident parsing bug for a well-formed fast-import input.
Though the parsing is still loose and can accept a ill-formed input.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation/git-fast-import.txt says that git-fast-import is strict
about it's input format. But committer/author field parsing is a bit
loose. Invalid values can be unnoticed and written out to the commit,
either with format-conforming input or with non-format-conforming one.
Add one passing and one failing test for empty/absent committer name
with well-formed input. And a failed test with unnoticed ill-formed
input.
Reported-by: SASAKI Suguru <sss.sonik@gmail.com>
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
|
|
Add a 'done' command that causes fast-import to stop reading from the
stream and exit.
If the new --done command line flag was passed on the command line
(or a "feature done" declaration included at the start of the stream),
make the 'done' command mandatory. So "git fast-import --done"'s
input format will be prefix-free, making errors easier to detect when
they show up as early termination at some convenient time of the
upstream of a pipe writing to fast-import.
Another possible application of the 'done' command would to be allow a
fast-import stream that is only a small part of a larger encapsulating
stream to be easily parsed, leaving the file offset after the "done\n"
so the other application can pick up from there. This patch does not
teach fast-import to do that --- fast-import still uses buffered input
(stdio).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lazy fast-import frontend authors that want to rely on the backend to
keep track of the content of the imported trees _almost_ have what
they need in the 'cat-blob' command (v1.7.4-rc0~30^2~3, 2010-11-28).
But it is not quite enough, since
(1) cat-blob can be used to retrieve the content of files, but
not their mode, and
(2) using cat-blob requires the frontend to keep track of a name
(mark number or object id) for each blob to be retrieved
Introduce an 'ls' command to complement cat-blob and take care of the
remaining needs. The 'ls' command finds what is at a given path
within a given tree-ish (tag, commit, or tree):
'ls' SP <dataref> SP <path> LF
or in fast-import's active commit:
'ls' SP <path> LF
The response is a single line sent through the cat-blob channel,
imitating ls-tree output. So for example:
FE> ls :1 Documentation
gfi> 040000 tree 9e6c2b599341d28a2a375f8207507e0a2a627fe9 Documentation
FE> ls 9e6c2b599341d28a2a375f8207507e0a2a627fe9 git-fast-import.txt
gfi> 100644 blob 4f92954396e3f0f97e75b6838a5635b583708870 git-fast-import.txt
FE> ls :1 RelNotes
gfi> 120000 blob b942e499449d97aeb50c73ca2bdc1c6e6d528743 RelNotes
FE> cat-blob b942e499449d97aeb50c73ca2bdc1c6e6d528743
gfi> b942e499449d97aeb50c73ca2bdc1c6e6d528743 blob 32
gfi> Documentation/RelNotes/1.7.4.txt
The most interesting parts of the reply are the first word, which is
a 6-digit octal mode (regular file, executable, symlink, directory,
or submodule), and the part from the second space to the tab, which is
a <dataref> that can be used in later cat-blob, ls, and filemodify (M)
commands to refer to the content (blob, tree, or commit) at that path.
If there is nothing there, the response is "missing some/path".
The intent is for this command to be used to read files from the
active commit, so a frontend can apply patches to them, and to copy
files and directories from previous revisions.
For example, proposed updates to svn-fe use this command in place of
its internal representation of the repository directory structure.
This simplifies the frontend a great deal and means support for
resuming an import in a separate fast-import run (i.e., incremental
import) is basically free.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
|
|
* rr/fi-import-marks-if-exists:
fast-import: Introduce --import-marks-if-exists
|
|
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
|
|
* jn/fast-import-empty-tree-removal:
fast-import: treat filemodify with empty tree as delete
|
|
Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it. This is in keeping with the
general UI philosophy: git tracks content, not empty directories.
v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:
M 040000 4b825dc642cb6eb9a060e54bf8d69288fbee4904 subdir
One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree. It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.
Noticed-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a frontend uses a marks file to ensure its state persists between
runs, it may represent "clean slate" when bootstrapping with "no marks
yet". In such a case, feeding the last state with --import-marks and
saving the state after the current run with --export-marks would be a
natural thing to do.
The --import-marks option however errors out when the specified marks file
doesn't exist; this makes bootstrapping a bit difficult. The location of
the marks file becomes backend-dependent when --relative-marks is in
effect, and the frontend cannot check for the existence of the file in
such a case.
The --import-marks-if-exists option does the same thing as --import-marks
but does not flag an error if the named file does not exist yet to help
these frontends.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is unfortunate to have to issue thousands of one-byte read calls to
work around dd's refusal to buffer input that would fill a block after
a short read (a3a6f4, 2010-12-13). We could do better by using
"head -c", if it were available on all platforms we cared about.
Replace it with some simple perl.
While doing so, restructure 9300.114 to use a subshell instead of a
script. Subshells can inherit functions (like the new head_c) from
the parent shell while external scripts cannot.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/fast-import-blob-access:
t9300: avoid short reads from dd
t9300: remove unnecessary use of /dev/stdin
fast-import: Allow cat-blob requests at arbitrary points in stream
fast-import: let importers retrieve blobs
fast-import: clarify documentation of "feature" command
fast-import: stricter parsing of integer options
Conflicts:
fast-import.c
|
|
dd is a thin wrapper around read(2). As open group Issue 7 explains:
It shall read the input one block at a time, using the specified
input block size; it shall then process the block of data
actually returned, which could be smaller than the requested
block size.
Any short read --- for example from a pipe whose capacity cannot fill
a block --- results in that block being truncated. As a result, the
first cat-blob test (9300.114) fails on Mac OS X, where the pipe
capacity is around 8 KiB.
Fix the test by using a block size of 1. Each read will block until
the next byte of input is available.
It would be even nicer to use head -c which expresses the intention
more clearly. Alas, IRIX "head" does not support the -c option.
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We really shouldn't be using these funny /dev/* files that did not exist
in V7 UNIX in our tests when we do not have to.
Output from
$ git grep -n -e /dev/ --and --not -e /dev/null t/
tells us that, aside from use of /dev/urandom in apache.conf used in http
tests, "dd if=/dev/stdin" added recently to t/t9300-fast-import.sh are the
only offenders, and "dd" reads from the standard input by default, so
removing them should be straightforward.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new rule: a "cat-blob" can be inserted wherever a comment is
allowed, which means at the start of any line except in the middle of
a "data" command.
This saves frontends from having to loop over everything they want to
commit in the next commit and cat-ing the necessary objects in
advance.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New objects written by fast-import are not available immediately.
Until a checkpoint has been started and finishes writing the pack
index, any new blobs will not be accessible using standard git tools.
So introduce a new way to access them: a "cat-blob" command in the
command stream requests for fast-import to print a blob to stdout or a
file descriptor specified by the argument to --cat-blob-fd. The value
for cat-blob-fd cannot be specified in the stream because that would
be a layering violation: the decision of where to direct a stream has
to be made when fast-import is started anyway, so we might as well
make the stream format is independent of that detail.
Output uses the same format as "git cat-file --batch".
Thanks to Sverre Rabbelier and Sam Vilain for guidance in designing
the protocol.
Based-on-patch-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Acked-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check the result from strtoul to avoid accepting arguments like
--depth=-1 and --active-branches=foo,bar,baz.
Requested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/fast-import-fix:
fast-import: do not clear notes in do_change_note_fanout()
t9300 (fast-import): another test for the "replace root" feature
fast-import: tighten M 040000 syntax
fast-import: filemodify after M 040000 <tree> "" crashes
|
|
* en/and-cascade-tests: (25 commits)
t4124 (apply --whitespace): use test_might_fail
t3404: do not use 'describe' to implement test_cmp_rev
t3404 (rebase -i): introduce helper to check position of HEAD
t3404 (rebase -i): move comment to description
t3404 (rebase -i): unroll test_commit loops
t3301 (notes): use test_expect_code for clarity
t1400 (update-ref): use test_must_fail
t1502 (rev-parse --parseopt): test exit code from "-h"
t6022 (renaming merge): chain test commands with &&
test-lib: introduce test_line_count to measure files
tests: add missing &&, batch 2
tests: add missing &&
Introduce sane_unset and use it to ensure proper && chaining
t7800 (difftool): add missing &&
t7601 (merge-pull-config): add missing &&
t7001 (mv): add missing &&
t6016 (rev-list-graph-simplify-history): add missing &&
t5602 (clone-remote-exec): add missing &&
t4026 (color): remove unneeded and unchained command
t4019 (diff-wserror): add lots of missing &&
...
Conflicts:
t/t7006-pager.sh
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another test for the replace root feature. One can imagine an
implementation for which R "some/subdir" "" would free some state
associated to the subdir and leave fast-import confused.
Luckily, git's is not such an implementation.
While at it, change the previous test to use C "some/subdir" ""
instead of R (i.e., test both syntaxes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When tree_content_set() is asked to modify the path "foo/bar/",
it first recurses like so:
tree_content_set(root, "foo/bar/", sha1, S_IFDIR) ->
tree_content_set(root:foo, "bar/", ...) ->
tree_content_set(root:foo/bar, "", ...)
And as a side-effect of 2794ad5 (fast-import: Allow filemodify to set
the root, 2010-10-10), this last call is accepted and changes
the tree entry for root:foo/bar to refer to the specified tree.
That seems safe enough but let's reject the new syntax (we never meant
to support it) and make it harder for frontends to introduce pointless
incompatibilities with git fast-import 1.7.3.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until M 040000 <tree> "" syntax was introduced in commit 2794ad5
(fast-import: Allow filemodify to set the root, 2010-10-10), it
was impossible for the root entry to refer to an unloaded tree.
Update various functions to take that possibility into account.
Otherwise
M 040000 <tree> ""
M 100644 :1 "foo"
and similar commands (using D, C, or R after resetting the root
tree) segfault.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
v1.7.3-rc0~75^2 (Teach fast-import to import subtrees named by tree id,
2010-06-30) has a shortcoming - it doesn't allow the root to be set.
Extend this behaviour by allowing the root to be referenced as the
empty path, "".
For a command (like filter-branch --subdirectory-filter) that wants
to commit a lot of trees that already exist in the object db, writing
undeltified objects as loose files only to repack them later can
involve a significant amount of overhead.
(23% slow-down observed on Linux 2.6.35, worse on Mac OS X 10.6)
Fortunately we have fast-import (which is one of the only git commands
that will write to a pack directly) but there is not an advertised way
to tell fast-import to commit a given tree without unpacking it.
This patch changes that, by allowing
M 040000 <tree id> ""
as a filemodify line in a commit to reset to a particular tree without
any need to parse it. For example,
M 040000 4b825dc642cb6eb9a060e54bf8d69288fbee4904 ""
is a synonym for the deleteall command and the fast-import equivalent of
git read-tree 4b825dc642cb6eb9a060e54bf8d69288fbee4904
Signed-off-by: David Barr <david.barr@cordelta.com>
Commit-message-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Tested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/maint-fix-test:
Several tests: cd inside subshell instead of around
Conflicts:
t/t9600-cvsimport.sh
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/fast-import-subtree:
Teach fast-import to import subtrees named by tree id
|
|
dump_marks_helper() has a bug when dumping marks larger than 2^20-1,
i.e., when the sparse array has more than two levels. The bug was
that the 'base' counter was being shifted by 20 bits at level 3, and
then again by 10 bits at level 2, rather than a total shift of 20 bits
in this argument to the recursive call:
(base + k) << m->shift
There are two ways to fix this correctly, the elegant:
(base + k) << 10
and the one I chose due to edit distance:
base + (k << m->shift)
Signed-off-by: Raja R Harinath <harinath@hurrynot.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To simulate the svn cp command, it would be very useful to be
replace an arbitrary file in the current revision by an
arbitrary directory from a previous one. Modify the filemodify
command to allow that:
M 040000 <tree id> pathname
This would be most useful in combination with a facility to
print the commit ids for new revisions as they are written.
Cc: Shawn O. Pearce <spearce@spearce.org>
Cc: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-fast-import-large-blob:
fast-import: Stream very large blobs directly to pack
bash: don't offer remote transport helpers as subcommands
Conflicts:
fast-import.c
|
|
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'jh/notes' (early part):
Add more testcases to test fast-import of notes
Rename t9301 to t9350, to make room for more fast-import tests
fast-import: Proper notes tree manipulation
|
|
This patch teaches 'git fast-import' to automatically organize note objects
in a fast-import stream into an appropriate fanout structure. The notes API
in notes.h is NOT used to accomplish this, because trying to keep the
fast-import and notes data structures in sync would yield a significantly
larger patch with higher complexity.
Note objects are added with the 'N' command, and accounted for with a
per-branch counter, which is used to trigger fanout restructuring when
needed. Note that when restructuring the branch tree, _any_ entry whose
path consists of 40 hex chars (not including directory separators) will
be recognized as a note object. It is therefore not advisable to
manipulate note entries with M/D/R/C commands.
Since note objects are stored in the same tree structure as other objects,
the unloading and reloading of a fast-import branches handle note objects
transparently.
This patch has been improved by the following contributions:
- Shawn O. Pearce: Several style- and logic-related improvements
Cc: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After specifying 'feature relative-marks' the paths specified with
'feature import-marks' and 'feature export-marks' are relative to an
internal directory in the current repository.
In git-fast-import this means that the paths are relative to the
'.git/info/fast-import' directory. However, other importers may use a
different location.
Add 'feature non-relative-marks' to disable this behavior, this way
it is possible to, for example, specify the import-marks location as
relative, and the export-marks location as non-relative.
Also add tests to verify this behavior.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Nieder
Johannes Schindelin
Dmitry Ivankov
Sverre Rabbelier
David Barr
Ramkumar Ramachandra
Jens Lehmann
Raja R Harinath
Shawn O. Pearce
Johan Herland