| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git archive" learned to handle files that are larger than 8GB and
commits far in the future than expressible by the traditional US-TAR
format.
* jk/big-and-future-archive-tar:
archive-tar: drop return value
archive-tar: write extended headers for far-future mtime
archive-tar: write extended headers for file sizes >= 8GB
t5000: test tar files that overflow ustar headers
t9300: factor out portable "head -c" replacement
|
|
It is sometimes useful to be able to read exactly N bytes from a
pipe. Doing this portably turns out to be surprisingly difficult
in shell scripts.
We want a solution that:
- is portable
- never reads more than N bytes due to buffering (which
would mean those bytes are not available to the next
program to read from the same pipe)
- handles partial reads by looping until N bytes are read
(or we see EOF)
- is resilient to stray signals giving us EINTR while
trying to read (even though we don't send them, things
like SIGWINCH could cause apparently-random failures)
Some possible solutions are:
- "head -c" is not portable, and implementations may
buffer (though GNU head does not)
- "read -N" is a bash-ism, and thus not portable
- "dd bs=$n count=1" does not handle partial reads. GNU dd
has iflags=fullblock, but that is not portable
- "dd bs=1 count=$n" fixes the partial read problem (all
reads are 1-byte, so there can be no partial response).
It does make a lot of write() calls, but for our tests
that's unlikely to matter. It's fairly portable. We
already use it in our tests, and it's unlikely that
implementations would screw up any of our criteria. The
most unknown one would be signal handling.
- perl can do a sysread() loop pretty easily. On my Linux
system, at least, it seems to restart the read() call
automatically. If that turns out not to be portable,
though, it would be easy for us to handle it.
That makes the perl solution the least bad (because we
conveniently omitted "length of code" as a criterion).
It's also what t9300 is currently using, so we can just pull
the implementation from there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
|
|
Certain lines of the marks file might be corrupted (or the objects
missing due to a garbage collection), but that's no reason to truncate
the file and essentially destroy the rest of it.
Ideally missing objects should not cause a crash, we could just skip
them, but that's another patch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
strbuf_getwholeline() did not NUL-terminate the buffer on certain
corner cases in its error codepath.
* jk/getwholeline-getdelim-empty:
strbuf_getwholeline: NUL-terminate getdelim buffer on error
|
|
Commit 0cc30e0 (strbuf_getwholeline: use getdelim if it is
available, 2015-04-16) tries to clean up after getdelim()
returns EOF, but gets one case wrong, which can lead in some
obscure cases to us reading uninitialized memory.
After getdelim() returns -1, we re-initialize the strbuf
only if sb->buf is NULL. The thinking was that either:
1. We fed an existing allocated buffer to getdelim(), and
at most it would have realloc'd, leaving our NUL in
place.
2. We didn't have a buffer to feed, so we gave getdelim()
NULL; sb->buf will remain NULL, and we just want to
restore the empty slopbuf.
But that second case isn't quite right. getdelim() may
allocate a buffer, write nothing into it, and then return
EOF. The resulting strbuf rightfully has sb->len set to "0",
but is missing the NUL terminator in the first byte.
Most call-sites are fine with this. They see the EOF and
don't bother looking at the strbuf. Or they notice that
sb->len is empty, and don't look at the contents. But
there's at least one case that does neither, and relies on
parsing the resulting (possibly zero-length) string:
fast-import. You can see this in action with the new test
(though we probably only notice failure there when run with
--valgrind or ASAN).
We can fix this by unconditionally resetting the strbuf when
we have a buffer after getdelim(). That fixes case 2 above.
Case 1 is probably already fine in practice, but it does not
hurt for us to re-assert our invariants (especially because
we are relying on whatever getdelim() happens to do, which
may vary from platform to platform). Our fix covers that
case, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our usual style these days is to execute everything inside
test_expect_success. Make it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
In the next commit, we will indent test case preparations. This will
require that here-documents ignore the tab indentation. Prepare for
this change by marking the here-doc words accordingly. This does not
have an effect now, but will remove some noise from the git diff -b
output of the next commit.
The change here is entirely automated with this perl command:
perl -i -lpe 's/(cat.*<<) *((EOF|(EXPECT|INPUT)_END).*$)/$1-$2 &&/' t/t9300-fast-import.sh
i.e., inserts a dash between << and the EOF word (and removes blanks
that our style guide abhors) and appends the && that will become
necessary.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
A number of clean-ups of test cases are performed outside of
test_expect_success. Replace these cases by using test_when_finished.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
It is customary to have each command in test snippets on its own line.
Fix those instances that do not follow this guideline.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Instead of comparing actual output to an empty file, use
test_must_be_empty. In addition to the better error message provided by
the helper, allocation of an empty file during the setup sequence can be
avoided.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
One test case open-codes a test for an expected failure. Replace it by
test_must_fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Many test cases do not follow our modern style that places the
single-quotes that surround the shell code snippets before and after
the shell code. Make it so.
Many of the lines changed in this way are indented other than by a
single tab. Change them (and some additional lines) to be indented
with a tab.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
It is sometimes useful for importers to be able to read the SHA-1
corresponding to a mark that they have created via fast-import. For
example, they might want to embed the SHA-1 into the commit message of
a later commit. Or it might be useful for internal bookkeeping uses,
or for logging.
Add a "get-mark" command to "git fast-import" that allows the importer
to ask for the value of a mark that has been created earlier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These test scripts likely predate test_must_fail, and can be
made simpler by using it (in addition to making them pass
--chain-lint).
The case in t6036 loses some verbosity in the failure case,
but it is so tied to a specific failure mode that it is not
worth keeping around (and the outcome of the test is not
affected at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* jc/diff-test-updates:
test_ln_s_add: refresh stat info of fake symbolic links
t4008: modernise style
t/diff-lib: check exact object names in compare_diff_raw
tests: do not borrow from COPYING and README from the real source
t4010: correct expected object names
t9300: correct expected object names
t4008: correct stale comments
|
|
The output the test #36 expects is bogus. There are no blob objects
whose names are 36a590... or 046d037... when this test was run.
It was left unnoticed only because compare_diff_raw, which only
cares about the add/delete/rename/copy was used to check the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no straightforward way to grep for all tests dealing with
invalid refs. Put them in a single test script so it is easy to see
what functionality has not been exercised with bad ref names yet.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/t9300-typofix:
t9300-fast-import: fix typo in test description
|
|
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/no-test-cmp-for-binaries:
t9300: use test_cmp_bin instead of test_cmp to compare binary files
|
|
An attempt to remove the entire tree in the "git fast-import" input
stream caused it to misbehave.
* mb/fast-import-delete-root:
fast-import: fix segfault in store_tree()
t9300: test filedelete command
|
|
test_cmp is intended to produce diff output for human consumption. The
input in one instance in t9300-fast-import.sh are binary files, however.
Use test_cmp_bin to compare the files.
This was noticed because on Windows we have a special implementation of
test_cmp in pure bash code (to ignore differences due to intermittent CR
in actual output), and bash runs into an infinite loop due to the binary
nature of the input.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Branch tree is NULLified by filedelete command if we are trying
to delete root tree. Add sanity check and use load_tree() in that case.
Signed-off-by: Maxim Bublis <satori@yandex-team.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new fast-import test series for filedelete command.
Signed-off-by: Maxim Bublis <satori@yandex-team.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support for Back when bdccd3c1 (test-lib: allow negation of
prerequisites, 2012-11-14) introduced negated predicates
(e.g. "!MINGW,!CYGWIN"), we already had 5 test files that use
NOT_MINGW (and a few MINGW) as prerequisites.
Let's not add NOT_FOO and rewrite existing ones as !FOO for both
MINGW and CYGWIN.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of the last commit, we can use "perl" instead of
"$PERL_PATH" when running tests, as the former is now a
function which uses the latter. As the shorter "perl" is
easier on the eyes, let's switch to using it everywhere.
This is not quite a mechanical s/$PERL_PATH/perl/
replacement, though. There are some places where we invoke
perl from a script we generate on the fly, and those scripts
do not have access to our internal shell functions. The
result can be double-checked by running:
ln -s /bin/false bin-wrappers/perl
make test
which continues to pass even after this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
|
|
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because fast-import.c::tree_content_remove does not check for the empty
path, it is not possible to move the root tree to a subdirectory.
Instead the error "Path not in branch" is produced (note the double
space where the empty path has been inserted).
Fix this by explicitly checking for the empty path and handling it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 178e1de (fast-import: don't allow 'ls' of path with empty
components, 2012-03-09) restricted paths which:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid).
However, the implementation also caught the empty path, which should
represent the root tree. Relax this restriction so that the empty path
is explicitly allowed and refers to the root tree.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When given an empty path, fast-import sometimes reports "missing"
instead of using the root tree object. On top of this, for "ls" and
file copy (but not move) it dies with "Empty path component found in
input".
Document this behaviour with failing test cases.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'PIPE' test prerequisite was already defined identically by t9010
and t9300, therefore it makes sense to make it a predefined
prerequisite.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
|
|
Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Leila Muhtasib <muhtasib@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a
few tests already actually use this variable when perl is needed. The
other test just call 'perl' and it might happen that the wrong perl
interpreter is used.
This becomes problematic on Windows, when the perl interpreter that is
compiled and installed on the Windows system is used, because this perl
interpreter might introduce some unexpected LF->CRLF conversions.
This patch makes sure that $PERL_PATH is used everywhere in the test suite
and that the correct perl interpreter is used.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By Johannes Sixt
* js/fast-import-test-9300:
t9300-fast-import: avoid 'exit' in test_expect_success snippets
|
|
Exiting from a for-loop early using '|| break' does not propagate the
failure code, and for this reason, the tests used just 'exit'. But this
ends the test script with 'FATAL: Unexpected exit code 1' in the case of
a failed test.
Fix this by moving the loop into a shell function, from which we can
simply return early.
While at it, modernize the style of the affected test cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The syntax for the use of mark references in fast-import
demands either a SP (space) or LF (end-of-line) after
a mark reference. Fast-import does not complain when garbage
appears after a mark reference in some cases.
Factor out parsing of mark references and complain if
errant characters are found. Also be a little more careful
when parsing "inline" and SHA1s, complaining if extra
characters appear or if the form of the dataref is unrecognized.
Buggy input can cause fast-import to produce the wrong output,
silently, without error. This makes it difficult to track
down buggy generators of fast-import streams. An example is
seen in the last line of this commit command:
commit refs/heads/S2
committer Name <name@example.com> 1112912893 -0400
data <<COMMIT
commit message
COMMIT
from :1M 100644 :103 hello.c
It is missing a newline and should be:
[...]
from :1
M 100644 :103 hello.c
What fast-import does is to produce a commit with the same
contents for hello.c as in refs/heads/S2^. What the buggy
program was expecting was the contents of blob :103. While
the resulting commit graph looked correct, the contents in
some commits were wrong.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/maint-fast-import-empty-ls:
fast-import: don't allow 'ls' of path with empty components
fast-import: leakfix for 'ls' of dirty trees
|
|
Andrew Sayers noticed that the svn-fe | git fast-import pipeline
mishandles a subversion history that copies the root directory to a
sub-directory (e.g. doing `svn cp . trunk` to standardise your
layout). As David Barr explained, the bug arises when the following
command is sent to git fast-import:
'ls' SP ':1' SP LF
Instead of reading back what is at the root of r1, it unconditionally
reports the path as missing.
After sleeping on it, here are two patches for 'maint'. One plugs a
memory leak. The other ensures that trying to pass an empty path to
the 'ls' command results in an error message that can help the
frontend author instead of the silently broken conversion Andrew
found.
Then we can carefully add 'ls ""' support in 1.7.11.
* commit 'refs/pull-request-tags/jn/maint-fast-import-empty-ls':
fast-import: don't allow 'ls' of path with empty components
fast-import: leakfix for 'ls' of dirty trees
|
|
As the fast-import manual explains:
The value of <path> must be in canonical form. That is it must
not:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid),
Unfortunately the "ls" command accepts these invalid syntaxes and
responds by declaring that the indicated path is missing. This is too
subtle and causes importers to silently misbehave; better to error out
so the operator knows what's happening.
The C, R, and M commands already error out for such paths.
Reported-by: Andrew Sayers <andrew-git@pileofstuff.org>
Analysis-by: David Barr <davidbarr@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
As diagnosed by Johannes Sixt, msys.dll does not hand through file
descriptors > 2 to child processes, so these test cases cannot passes when
run through an MSys bash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Felipe Contreras
Eric Wong
Elia Pinto
Johannes Sixt
Michael Haggerty
Ronnie Sahlberg
Stefan Beller
Maxim Bublis
Richard Hansen
John Keeping
Adam Spiers
Leila Muhtasib
Vincent van Ravesteijn
Jens Lehmann
Pete Wyckoff
Jonathan Nieder
Johannes Schindelin