| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix misbehavior in Git.pm that dates back to the very first version of
the library in git.git added in b1edc53d062 (Introduce Git.pm (v4),
2006-06-24). When we fail to execute a command we shouldn't ignore all
signals, those can happen e.g. if abort() is called, or if the command
segfaults.
Because of this we'd consider e.g. a command that died due to LSAN
exiting with abort() successful, as is the case with the tests listed
as running successfully with SANITIZE=leak in 9081a421a6d (checkout:
fix "branch info" memory leaks, 2021-11-16). We did run them
successfully, but only because we ignored these errors.
This was then made worse by the use of "abort_on_error=1" for LSAN
added in 85b81b35ff9 (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05). Doing that makes sense, but without providing that option
we'd have a "$? >> 8" of "23" on failure, with abort_on_error=1 we'll
get "0".
All of our tests pass even without the SIGPIPE exception being added
here, but as the code appears to have been trying to ignore it let's
keep ignoring it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".
Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.
This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e708 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).
There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.
The tests to mark as passing were found with:
rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate
# apply & compile this change
prove -j8 --state=failed :: --immediate
I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.
1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I have tweaked configuration in my ~/.subversion directory, namely I am
running auto-properties and automatically adding '$Id$' expansion to
every file. This choke the last test named 'proplist' from
t9101-git-svn-props.sh, because one more property, svn:keywords is
automatically added.
I had just wrapped svn invocation with the svn_cmd that specifies empty
directory via --config-dir argument. Since the latter is the global
option, it should be recognized by all svn subcommands, so no
regressions will be introduced.
Now svn_cmd is used everywhere, not just in the failed test module: this
should guard us from the future clashes with user-defined configuration
tweaks.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The 'branch' subcommand incorrectly had the svn-remote to use hardcoded
as 'svn', the default remote name. This meant that branches derived
from other svn-remotes would try to use the branch and tag configuration
for the 'svn' remote, potentially copying would-be branches to the wrong
place in SVN, into the branch namespace for another project.
Fix this by using the remote name extracted from the svn info for the
specified git ref. Add a testcase for this behaviour.
[jc: squashed in a fix to test from Michael J Gruber for older svn (1.4)]
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[ew: fixed a warning to stderr causing t9108 to fail]
Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Ævar Arnfjörð Bjarmason
Johan Herland
Jens Lehmann
Eygene Ryabinkin
Deskin Miller
Florian Ragwitz