summaryrefslogtreecommitdiff
path: root/t/t9114-git-svn-dcommit-merge.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-03-28test: avoid pipes in git related commands for testLibravatar Pratik Karki1-4/+6
Avoid using pipes downstream of Git commands since the exit codes of commands upstream of pipes get swallowed, thus potentially hiding failure of those commands. Instead, capture Git command output to a file and apply the downstream command(s) to that file. Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-09Replace Free Software Foundation address in license noticesLibravatar Todd Zullinger1-3/+1
The mailing address for the FSF has changed over the years. Rather than updating the address across all files, refer readers to gnu.org, as the GNU GPL documentation now suggests for license notices. The mailing address is retained in the full license files (COPYING and LGPL-2.1). The old address is still present in t/diff-lib/COPYING. This is intentional, as the file is used in tests and the contents are not expected to change. Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-12t9114-git-svn-dcommit-merge.sh: use the $( ... ) construct for command ↵Libravatar Elia Pinto1-6/+6
substitution The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-19Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not givenLibravatar Johan Herland1-2/+2
git-svn by default puts its Subversion-tracking refs directly in refs/remotes/*. This runs counter to Git's convention of using refs/remotes/$remote/* for storing remote-tracking branches. Furthermore, combining git-svn with regular git remotes run the risk of clobbering refs under refs/remotes (e.g. if you have a git remote called "tags" with a "v1" branch, it will overlap with the git-svn's tracking branch for the "v1" tag from Subversion. Even though the git-svn refs stored in refs/remotes/* are not "proper" remote-tracking branches (since they are not covered by a proper git remote's refspec), they clearly represent a similar concept, and would benefit from following the same convention. For example, if git-svn tracks Subversion branch "foo" at refs/remotes/foo, and you create a local branch refs/heads/foo to add some commits to be pushed back to Subversion (using "git svn dcommit), then it is clearly unhelpful of Git to throw warning: refname 'foo' is ambiguous. every time you checkout, rebase, or otherwise interact with the branch. The existing workaround for this is to supply the --prefix=quux/ to git svn init/clone, so that git-svn's tracking branches end up in refs/remotes/quux/* instead of refs/remotes/*. However, encouraging users to specify --prefix to work around a design flaw in git-svn is suboptimal, and not a long term solution to the problem. Instead, git-svn should default to use a non-empty prefix that saves unsuspecting users from the inconveniences described above. This patch will only affect newly created git-svn setups, as the --prefix option only applies to git svn init (and git svn clone). Existing git-svn setups will continue with their existing (lack of) prefix. Also, if anyone somehow prefers git-svn's old layout, they can recreate that by explicitly passing an empty prefix (--prefix "") on the git svn init/clone command line. The patch changes the default value for --prefix from "" to "origin/", updates the git-svn manual page, and fixes the fallout in the git-svn testcases. (Note that this patch might be easier to review using the --word-diff and --word-diff-regex=. diff options.) [ew: squashed description of <= 1.9 behavior into manpage] Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-10-31t: replace pulls with mergesLibravatar Felipe Contreras1-1/+1
This is what the code intended. No functional changes. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-21t9114.2: Don't use --track option against "svn-remote"-tracking branchesLibravatar Johan Herland1-1/+1
We are formalizing a requirement that any remote-tracking branch to be used as an upstream (i.e. as an argument to --track), _must_ "belong" to a configured remote by being matched by the "dst" side of a fetch refspec. This test uses --track against a "remotes/trunk" ref which does not belong to any configured (git) remotes, but is instead created by "git svn fetch" operating on an svn-remote. It does not make sense to use an svn-remote as an upstream for a local branch, as a regular "git pull" from (or "git push" to) it would obviously fail (instead you would need to use "git svn" to communicate with this remote). Furthermore, the usage of --track in this case is unnecessary, since the upstreaming config that would be created is never used. Simply removing --track fixes the issue without changing the expected behavior of the test. Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-09tests: subshell indentation stylefixLibravatar Jonathan Nieder1-3/+4
Format the subshells introduced by the previous patch (Several tests: cd inside subshell instead of around, 2010-09-06) like so: ( cd subdir && ... ) && This is generally easier to read and has the nice side-effect that this patch will show what commands are used in the subshell, making it easier to check for lost environment variables and similar behavior changes. Cc: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-06Several tests: cd inside subshell instead of aroundLibravatar Jens Lehmann1-3/+3
Fixed all places where it was a straightforward change from cd'ing into a directory and back via "cd .." to a cd inside a subshell. Found these places with "git grep -w "cd \.\.". Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-21git-svn testsuite: use standard configuration for Subversion toolsLibravatar Eygene Ryabinkin1-3/+3
I have tweaked configuration in my ~/.subversion directory, namely I am running auto-properties and automatically adding '$Id$' expansion to every file. This choke the last test named 'proplist' from t9101-git-svn-props.sh, because one more property, svn:keywords is automatically added. I had just wrapped svn invocation with the svn_cmd that specifies empty directory via --config-dir argument. Since the latter is the global option, it should be recognized by all svn subcommands, so no regressions will be introduced. Now svn_cmd is used everywhere, not just in the failed test module: this should guard us from the future clashes with user-defined configuration tweaks. Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru> Acked-by: Eric Wong <normalperson@yhbt.net>
2008-09-08t/t91XX git-svn tests: run "git svn" not "git-svn"Libravatar Nanako Shiraishi1-1/+1
This replaces 'git-svn' with 'git svn' in the tests. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-11/+11
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-05git-svn: t9114: verify merge commit message in testLibravatar Eric Wong1-0/+5
It's possible that we end up with an incorrect commit message in this test after making changes to fix the clobber bug in dcommit. Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-13git-svn: allow dcommit to retain local merge informationLibravatar Eric Wong1-0/+89
dcommit will still rewrite the HEAD commit and the history of the first parents of each HEAD~1, HEAD~2, HEAD~3 as it always has. However, any merge parents (HEAD^2, HEAD^^2, HEAD~2^2) will now be preserved when the new HEAD and HEAD~[0-9]+ commits are rewritten to SVN with dcommit. Commits written to SVN will still not have any merge information besides anything in the commit message. Thanks to Joakim Tjernlund, Junio C Hamano and Steven Grimm for explanations, feedback, examples and test case. Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>